BinaryPack is a binary serialization library inspired by MessagePack, but even faster, more efficient and producing smaller files. The goal of this project is to be able to use BinaryPack as a drop-in replacement for JSON, XML, MessagePack or BinaryFormatter serialization, when the serialized models don't need to be shared with other applications or with web services. BinaryPack is built to be as fast and memory efficient as possible: it uses virtually no memory allocations, and the serialized data is packed to take up as little space as possible. Whenever you're using either JSON, MessagePack, XML or some other format to cache data for your apps, to send data between clients or to save data that is not critical, you can try using BinaryPack over your previous serialization library - it will provide the same basic functionalities to serialize and deserialize models, but with much higher performance and less memory usage.

This benchmark was performed with the JsonResponseModel class available in the repository, which contains a number of string, int, double and DateTime properties, as well as a collection of other nested models, representing an example of a JSON response from a REST API. This README also includes a number of benchmarks that were performed on a number of different models. The benchmark code and all the models used can be found in this repository as well. To summarize:

• BinaryPack was consistently the fastest library, both during serialization and deserialization. The performance difference ranged from 7.6x faster than Newtonsoft.Json, 7x than Utf8Json and 1.9x than MessagePack when serializing a small JSON response, to 245x faster than Newtonsoft.Json, 129x than Utf8Json and 3.9x than MessagePack when dealing with mostly binary data (eg. a model with a large float[] array).
• The memory usage was on average on par or better than Utf8Json, except when deserializing mostly binary data, in which case BinaryPack used 1/100 the memory of Utf8Json, and 1/2 that of MessagePack. BinaryPack also almost always resulted in the lowest number of GC collections during serialization and deserialization of models.
• In all cases, the BinaryPack serialization resulted in the smallest file on disk.

Table of Contents

• Installing from NuGet
• Quick start
  • Supported properties
  • Attributes
  • FAQ
• Benchmarks
• Requirements
• Special thanks

Installing from NuGet

To install BinaryPack, run the following command in the Package Manager Console

Install-Package BinaryPack

More details available here.

Quick start

BinaryPack exposes a BinaryConverter class that acts as entry point for all public APIs. Every serialization API is available in an overload that works on a Stream instance, and one that instead uses the new Memory<T> APIs.

The following sample shows how to serialize and deserialize a simple model.

// Assume that this class is a simple model with a few properties
var model = new Model { Text = "Hello world!", Date = DateTime.Now, Values = new[] { 3, 77, 144, 256 } };

// Serialize to a memory buffer
var data = BinaryConverter.Serialize(model);

// Deserialize the model
var loaded = BinaryConverter.Deserialize<Model>(data);

Supported properties

Here is a list of the property types currently supported by the library:

✅ Primitive types (except object): string, bool, int, uint, float, double, etc.

✅ Nullable value types: Nullable<T> or T? for short, where T : struct

✅ Unmanaged types: eg. System.Numerics.Vector2, and all unmanaged value types

✅ .NET arrays: T[], T[,], T[,,], etc.

✅ .NET collections: List<T>, IList<T>, ICollection<T>, IEnumerable<T>, etc.

✅ .NET dictionaries: Dictionary<TKey, TValue>, IDictionary<TKey, TValue> and IReadOnlyDictionary<TKey, TValue>

✅ Other .NET types: BitArray

Attributes

BinaryPack has a series of attributes that can be used to customize how the BinaryConverter class handles the serialization of input objects. By default, it will serialize all public properties of a type, but this behavior can be changed by using the BinarySerialization attribute. Here's an example:

[BinarySerialization(SerializationMode.Properties | SerializationMode.NonPublicMembers)]
public class MyModel
{
    internal string Id { get; set; }    
    
    public int Valud { get; set; }    
    
    [IgnoredMember]
    public DateTime Timestamp { get; set; }
}

Similarly, there's also a SerializableMember that can be used when the mode is set to SerializationMode.Explicit.

FAQ

Why is this library faster than the competition?

There are a number of reasons for this. First of all, BinaryPack dynamically generates code to serialize and deserialize every type you need. This means that it doesn't need to inspect types using reflection while serializing/deserializing, eg. to see what fields it needs to read etc. - it just creates the right methods once that work directly on instances of each type, and read/write members one after the other exactly as you would do if you were to write that code manually. This also allows BinaryPack to have some extremely optimized code paths that would otherwise be completely impossible. Then, unlike the JSON/XML/MessagePack formats, BinaryPack doesn't need to include any additional metadata for the serialized items, which saves time. This allows it to use the minimum possible space to serialize every value, which also makes the serialized files as small as possible.

Are there some downsides with this approach?

Yes, skipping all the metadata means that the BinaryPack format is not partcularly resilient to changes. This means that if you add or remove one of the serialized members of a type, it will not be possible to read previously serialized instances of that model. Because of this, BinaryPack should not be used with important data and is best suited for caching models or for quick serialization of data being exhanged between different clients.

Is this compatible with UWP?

Unfortunately not at the moment, UWP is still on .NET Standard 2.0 and doesn't support dynamic code generation due to how the .NET Native compiler is implemented. Hopefully it will be possible to use BinaryPack on UWP when it moves to .NET 5 and the new MonoAOT compiler in the second half of 2020.

Benchmarks

Here are three full benchmarks executed with the benchmark sample included in this repository. The error and standard deviation columns have been removed to fit each table in the horizontal space available for the README file reader on GitHub. As mentioned before, the JSON response model used in the first two benchmarks is the JsonResponseModel class. The class used in the last benchmark is instead NeuralNetworkLayerModel.

JSON response

Method	Categories	Mean	Ratio	Gen 0	Gen 1	Gen 2	Allocated
NewtonsoftJson	Serialization	1.083.1 us	1.00	156.2500	121.0938	107.4219	205083 B
BinaryFormatter	Serialization	1.446.6 us	1.34	132.8125	68.3594	37.1094	402558 B
NetCoreJson	Serialization	1.147.0 us	1.06	199.2188	142.5781	140.6250	252407 B
XmlSerializer	Serialization	1.274.5 us	1.18	250.0000	146.4844	107.4219	604205 B
Utf8Json	Serialization	744.4 us	0.69	140.6250	140.6250	140.6250	495 B
MessagePack	Serialization	217.3 us	0.20	61.0352	61.0352	61.0352	432 B
BinaryPack	Serialization	168.1 us	0.16	26.6113	26.6113	26.6113	108 B
NewtonsoftJson	Deserialization	2.092.1 us	1.00	66.4063	19.5313	-	304320 B
BinaryFormatter	Deserialization	1.466.9 us	0.70	130.8594	48.8281	-	676136 B
NetCoreJson	Deserialization	1.964.5 us	0.94	50.7813	15.6250	-	220856 B
XmlSerializer	Deserialization	2.098.6 us	1.00	132.8125	70.3125	35.1563	461000 B
Utf8Json	Deserialization	887.0 us	0.42	165.0391	131.8359	109.3750	237159 B
MessagePack	Deserialization	337.0 us	0.16	87.4023	53.2227	35.1563	241462 B
BinaryPack	Deserialization	168.8 us	0.08	46.6309	13.9160	-	215192 B

Neural network layer model

Method	Categories	Mean	Ratio	Gen 0	Gen 1	Gen 2	Allocated
NewtonsoftJson	Serialization	26,552.5 us	1.000	1281.2500	93.7500	62.5000	5217488 B
BinaryFormatter	Serialization	175.5 us	0.007	70.5566	33.9355	33.6914	155111 B
NetCoreJson	Serialization	36,868.3 us	1.389	1071.4286	71.4286	71.4286	4248542 B
XmlSerializer	Serialization	31,354.5 us	1.181	1250.0000	468.7500	437.5000	3452059 B
Utf8Json	Serialization	13,936.4 us	0.525	109.3750	109.3750	109.3750	72 B
MessagePack	Serialization	421.0 us	0.016	111.3281	111.3281	111.3281	762 B
BinaryPack	Serialization	108.9 us	0.004	10.0098	10.0098	10.0098	96 B
NewtonsoftJson	Deserialization	25,525.0 us	1.000	1687.5000	62.5000	31.2500	6994104 B
BinaryFormatter	Deserialization	126.4 us	0.005	13.9160	10.7422	10.7422	13247 B
NetCoreJson	Deserialization	16,771.4 us	0.657	62.5000	31.2500	31.2500	133380 B
XmlSerializer	Deserialization	38,382.1 us	1.503	1071.4286	428.5714	285.7143	3575022 B
Utf8Json	Deserialization	17,709.0 us	0.694	187.5000	187.5000	187.5000	101100 B
MessagePack	Deserialization	978.2 us	0.039	95.7031	95.7031	95.7031	1258 B
BinaryPack	Deserialization	111.8 us	0.004	10.0098	9.8877	9.8877	826 B

Requirements

The BinaryPack library requires .NET Standard 2.1 support and it has no external dependencies.

Additionally, you need an IDE with .NET Core 3.0 and C# 8.0 support to compile the library and samples on your PC.

Special thanks

Icon made by freepik from www.flaticon.com.