ACIDS 2022 NIME Workshop #3

---

Overview

This guide will help you setup everything you need for the ACIDS 2022 NIME Workshop #3

Requirements

• Computer (All OSes should work)
• Raspberry Pi 4 (3b+ is possible but will probably lag a bit)
• Ethernet cable (Wifi is possible, but you'll need to connect manually)

---

Flash the OS onto your microSD card

Raspberry Pi Imager is the quick and easy way to install an operating system to a microSD card ready to use with your Raspberry Pi.

• Insert your microSD card in your computer
• Open Raspberry Pi Imager, click on "Choose OS" -> "Other" -> "Raspberry Pi OS Lite 64bits"
• Select the microSD as the target destination
• in the settings tab enable SSH
• in the settings tab, if you'll be using wifi, add the SSID and password of your wifi network
• Launch the write process

Get your RaspberryPi ip adress

either:

• connect your rapsberrypi to a monitor & a keyboard, open a terminal and type ifconfig
• check your modem admin panel for connected equipements
• scan your network with sudo nmap -sn 192.168.1.0/24 (will probably not work on complex networks like those used in companies, universities etc...)

Connect using SSH

from your computer: ssh pi@{IP_ADDRESS}

Setup the dev environment on the RaspberryPi

sudo apt-get update -y
sudo apt-get install git pip libportaudio2 libsndfile1 -y

git clone https://github.com/dgenova/RAVEberry-server.git
cd RAVEberry-server
pip install -r Requirements.txt

Setup the webclient on your computer

git clone https://github.com/ZodiacFRA/RaveBerry
cd RaveBerry
python -m http.server

• open the url given at the http server launch
• in the interface enter the ip and port of the raspberrypi and connect