Frigate Lovelace Card

A full-featured Frigate Lovelace card:

• Live viewing of multiple cameras.
• Clips and snapshot browsing via mini-gallery.
• Automatic updating to continually show latest clip / snapshot.
• Support for filtering events by zone and label.
• Arbitrary entity access via menu (e.g. motion sensor access).
• Fullscreen mode.
• Carousel/Swipeable media, thumbnails and cameras.
• Direct media downloads.
• Lovelace visual editing support.
• Full Picture Elements support.
• Theme friendly.

Screenshots Below!

See more screenshots below.

Installation

• HACS is highly recommended to install the card -- it works for all Home Assistant variants. If you don't have HACS installed, start there -- then come back to these instructions.

• Find the card in HACS:

Home Assistant > HACS > Frontend > "Explore & Add Integrations" > Frigate Card

• Click Download this repository with HACS.

Lovelace YAML users

If Lovelace is in YAML mode then there's an additional step required to load the resource into your browser. (This mode is not the default -- you would seemode: yaml under lovelace: in your configuration.yaml if this applies to you),

• Add the following to configuration.yaml (note that /hacsfiles/ is just an optimized equivalent of /local/community/ that HACS natively supports):

lovelace:
  resources:
    - url: /hacsfiles/frigate-hass-card/frigate-hass-card.js
      type: module

• Restart Home Assistant.
• Add the new card to the Lovelace configuration!

Advanced Users: Manual Installation

Note: This is very rarely needed unless you are developing the card. Please consider HACS (above)!

• Download the frigate-hass-card.js attachment of the desired release to a location accessible by Home Assistant.
• Add the location as a Lovelace resource via the UI, or via YAML configuration) such as:

lovelace:
  mode: yaml
  resources:
   - url: /local/frigate-hass-card.js
     type: module

Configuration

At least 1 camera must be configured in the cameras section, but otherwise all configuration parameters are optional.

Camera Options

The cameras block configures a list of cameras the card should support. The first listed camera is the default. Camera configuration is under:

cameras:
  - [...camera 0 (default camera)...]
  - [...camera 1...]
  - [...camera 2...]

See the fully expanded cameras configuration example for how these parameters are structured.

Option	Default	Overridable	Description
camera_entity		✖️	The Home Assistant camera entity to use with the frigate live provider view. Also used to automatically detect the name of the underlying Frigate camera, and the title/icon of the camera.
live_provider	auto	✖️	The choice of live stream provider. See Live Providers below.
title	Autodetected from camera_entity if that is specified.	✖️	A friendly name for this camera to use in the card.
icon	Autodetected from camera_entity if that is specified.	✖️	The icon to use for this camera in the camera menu and in the next & previous controls when using the icon style.
id	camera_entity, webrtc_card.entity or frigate.camera_name if set (in that preference order).	✖️	An optional identifier to use throughout the card configuration to refer unambiguously to this camera. See camera IDs.
frigate		✖️	Options for a Frigate camera. See Frigate configuration below.
dependencies		✖️	Other cameras that this camera should depend upon. See camera dependencies below.
triggers		✖️	Define what should cause this camera to update/trigger. See camera triggers below.
webrtc_card		✖️	The WebRTC entity/URL to use for this camera with the webrtc-card live provider. See below.

Available Live Providers

Live Provider	Latency	Frame Rate	Installation	Description
ha (default HA configuration)	Poor	High	Builtin	Use the built-in Home Assistant camera stream. The camera doesn't even need to be a Frigate camera!
ha (when configured with LL-HLS)	Better	High	Builtin	Use the built-in Home Assistant camera streams -- can be configured to use an LL-HLS feed for lower latency.
ha (Native WebRTC)	Best	High	Builtin	Use the built-in Home Assistant camera streams -- can be configured to use native WebRTC offering a very low-latency feed direct to your browser.
frigate-jsmpeg	Better	Low	Builtin	Stream the JSMPEG stream from Frigate (proxied via the Frigate integration). See note below on the required integration version for this live provider to function. This is the only live provider that can view the Frigate birdseye view.
webrtc-card	Best	High	Separate installation required	Embed's AlexxIT's WebRTC Card to stream live feed, requires manual extra setup, see below. Not to be confused with native Home Assistant WebRTC (use ha provider above).

Camera Frigate configuration

The frigate block configures options for a Frigate camera. This configuration is included as part of a camera entry in the cameras array.

cameras:
 - frigate:

Option	Default	Overridable	Description
camera_name	Autodetected from camera_entity if that is specified.	✖️	The Frigate camera name to use when communicating with the Frigate server, e.g. for viewing clips/snapshots or the JSMPEG live view. To view the birdseye view set this to birdseye and use the frigate-jsmpeg live provider.
url		✖️	The URL of the frigate server. If set, this value will be (exclusively) used for a Frigate UI menu button. All other communication with Frigate goes via Home Assistant.
label		✖️	A Frigate label / object filter used to filter events (clips & snapshots), e.g. person.
zone		✖️	A Frigate zone used to filter events (clips & snapshots), e.g. front_door.
client_id	frigate	✖️	The Frigate client id to use. If this Home Assistant server has multiple Frigate server backends configured, this selects which server should be used. It should be set to the MQTT client id configured for this server, see Frigate Integration Multiple Instance Support.

Camera WebRTC Card configuration

The webrtc_card block configures only the entity/URL for this camera to be used with the WebRTC Card live provider. This configuration is included as part of a camera entry in the cameras array.

cameras:
 - webrtc_card:

Option	Default	Overridable	Description
entity		✖️	The RTSP entity to pass to the WebRTC Card for this camera. Specify this OR url (below).
url		✖️	The RTSP url to pass to the WebRTC Card. Specify this OR entity (above).

See Using the WebRTC Card below for more details on how to use the WebRTC Card live provider.

Camera Dependency Configuration

The dependencies block configures other cameras as dependents of this camera. Dependent cameras have their events fetched and merged with this camera. Configuration is under:

cameras:
 - dependencies:

Option	Default	Overridable	Description
cameras		✖️	An optional array of other camera identifiers (see camera IDs). If specified the card will fetch events for this camera and also recursively events for the named cameras. All dependent cameras must themselves be a configured camera in the card. This can be useful to group events for cameras that are close together, to always have clips/snapshots show fully merged events across all cameras or to show events for the birdseye camera that otherwise would not have events itself.
all_cameras	false	✖️	Shortcut to specify all other cameras as dependent cameras.

Camera Trigger Configuration

The triggers block configures what triggers a camera. Triggering can be used to either reset to the default view / update the card, or active the camera in scan mode.

cameras:
 - triggers:

Option	Default	Overridable	Description
motion	false	✖️	Whether to not to trigger the camera by automatically detecting and using the motion binary_sensor for this camera. This autodetection only works for Frigate cameras, and only when the motion binary_sensor entity has been enabled in Home Assistant.
occupancy	true	✖️	Whether to not to trigger the camera by automatically detecting and using the occupancy binary_sensor for this camera. This autodetection only works for Frigate cameras, and only when the occupancy binary_sensor entity has been enabled in Home Assistant.
entities		✖️	Whether to not to trigger the camera when the state of any Home Assistant entity becomes active (i.e. state becomes on or open). This works for Frigate or non-Frigate cameras.

Camera IDs: Refering to cameras in card configuration

Each camera configured in the card has a single identifier (id). For a given camera, this will be one of the camera {id, camera_entity, webrtc_card.entity or frigate.camera_name} parameters for that camera -- in that order of precedence. These ids may be used in conditions, dependencies or custom actions to refer to a given camera unambiguously. |

Example

See the basic cameras configuration example below.

View Options

All configuration is under:

view:

See the fully expanded view configuration example for how these parameters are structured.

Option	Default	Overridable	Description
default	live	✅	The view to show in the card by default. The default camera is the first one listed. See views below.
camera_select	current	✅	The view to show when a new camera is selected (e.g. in the camera menu). If current the view is unchanged when a new camera is selected. Other acceptable values may be seen at views below.
dark_mode	off	✅	Whether or not to turn dark mode on, off or auto to automatically turn on if the card timeout_seconds has expired (i.e. card has been left unattended for that period of time) or if dark mode is enabled in the HA profile theme setting. Dark mode dims the brightness by 25%.
timeout_seconds	300	✅	A numbers of seconds of inactivity after user interaction, after which the card will reset to the default configured view (i.e. 'screensaver' functionality). Inactivity is defined as lack of mouse/touch interaction with the Frigate card. If the default view occurs sooner (e.g. via update_seconds or manually) the timer will be stopped. 0 means disable this functionality.
update_seconds	0	✅	A number of seconds after which to automatically update/refresh the default view. See card updates below for behavior and usecases. If the default view occurs sooner (e.g. manually) the timer will start over. 0 disables this functionality.
update_force	false	✅	Whether automated card updates/refreshes should ignore user interaction. See card updates below for behavior and usecases.
update_entities		✅	YAML only: A card-wide list of entities that should cause the view to reset to the default (if the entity only pertains to a particular camera use triggers for the selected camera instead, see Trigger Configuration). See card updates below for behavior and usecases.
update_cycle_camera	false	✅	When set to true the selected camera is cycled on each default view change.
render_entities		✅	YAML only: A list of entity ids that should cause the card to re-render 'in-place'. The view/camera is not changed. update_* flags do not pertain/relate to the behavior of this flag. This should very rarely be needed, but could be useful if the card is both setting and changing HA state of the same object as could be the case for some complex card_mod scenarios (example).
scan		✅	Configuration for scan mode.
actions		✅	Actions to use for all views, individual actions may be overriden by view-specific actions. See actions below.

View: Scan Mode configuration

All configuration is under:

view:
  scan:

Scan mode allows the card to automatically "follow the action". In this mode the card will automatically select a camera in the live view when an entity changes to an active state (specifically on or open). The entities considered are defined by your camera configuration (see triggers parameters). An untrigger is defined as the state for all the configured entities returning to inactive (i.e. not on or open), with an optional number of seconds to wait prior to the untriggering (see untrigger_seconds).

When the camera untriggers, the view will either remain as-is (if untrigger_reset is false) and the card return to normal operation, or reset to the default view (if untrigger_reset is true -- the default).

Triggering is only allowed when there is no ongoing human interaction with the card -- interaction will automatically untrigger and further triggering will not occur until after the card has been unattended for view.timeout_seconds.

Scan mode tracks Home Assistant state changes -- when the card is first started, it takes an active change in state to trigger (i.e. an already occupied room will not trigger it, but a newly occupied room will).

Option	Default	Overridable	Description
enabled	false	✅	Whether to enable scan mode.
show_trigger_status	true	✅	Whether or not the card should show a visual indication that it is triggered (a pulsing border around the card edge).
untrigger_reset	true	✅	Whether or not to reset the view to the default after untriggering.
untrigger_seconds	0	✅	The number of seconds to wait after all entities are inactive before untriggering.

Menu Options

All configuration is under:

menu:

See the fully expanded menu configuration example for how these parameters are structured.

Option	Default	Overridable	Description
style	hidden	✅	The menu style to show by default, one of none, hidden, hover, overlay, or outside. See menu styles below.
position	top	✅	Whether to show the menu on the left, right, top or bottom side of the card. Note that for the outside style only the top and bottom positions have an effect.
alignment	left	✅	Whether to align the menu buttons to the left, right, top or bottom of the menu. Some selections may have no effect depending on the value of position (e.g. it doesn't make sense to left align icons on a menu with position to the left).
button_size	40	✅	The size of the menu buttons in pixels. Must be >= 20.
buttons		✅	Whether to show or hide built-in buttons. See below.

Menu Options: Buttons

All configuration is under:

menu:
  buttons:
    [button]:

Buttons

Option	Overridable	Description
frigate	✅	The Frigate menu button: brings the user to the default configured view (view.default), or collapses/expands the menu if the menu.style is hidden .
cameras	✅	The camera selection submenu. Will only appear if multiple cameras are configured.
live	✅	The live view menu button: brings the user to the live view. See views below.
clips	✅	The clips view menu button: brings the user to the clips view on tap and the most-recent clip view on hold. See views below. This button will never be shown if the frigate.camera_name for the selected camera is not auto-detected/specified (e.g. non-Frigate cameras), or if the frigate.camera_name is birdseye.
snapshots	✅	The snapshots view menu button: brings the user to the clips view on tap and the most-recent snapshot view on hold. See views below. This button will never be shown if the frigate.camera_name for the selected camera is not auto-detected/specified (e.g. non-Frigate cameras), or if the frigate.camera_name is birdseye.
image	✅	The image view menu button: brings the user to the static image view. See views below.
download	✅	The download menu button: allow direct download of the media being displayed.
frigate_ui	✅	The frigate_ui menu button: brings the user to a context-appropriate page on the Frigate UI (e.g. the camera homepage). Will only appear if the frigate.url option is set.
fullscreen	✅	The fullscreen menu button: expand the card to consume the fullscreen.
timeline	✅	The timeline menu button: show the event timeline.
media_player	✅	The media_player menu button: sends the visible media to a remote media player. Supports Frigate clips, snapshots and live camera (only for cameras that specify a camera_entity and only using the default HA stream (equivalent to the ha live provider). jsmpeg or webrtc-card are not supported, although live can still be played as long as camera_entity is specified. In the player list, a tap will send the media to the player, a hold will stop the media on the player.

Configuration on each button

Option	Default	Overridable	Description
enabled	true for all buttons except image	✅	Whether or not to show the button.
priority	50	✅	The button priority. Higher priority buttons are ordered closer to the start of the menu alignment (i.e. a button with priority 70 will order further to the left than a button with priority 60, when the menu alignment is left). Minimum 0, maximum 100.
icon		✅	An icon to overriding the default for that button, e.g. mdi:camera-front.
alignment	matching	✅	Whether this button should have an alignment that is matching the menu alignment or opposing the menu. Can be used to create two separate groups of buttons on the menu. priority orders buttons within a given alignment.

Live Options

All configuration is under:

live:

See the fully expanded live configuration example for how these parameters are structured.

Option	Default	Overridable	Description
preload	false	✖️	Whether or not to preload the live view. Preloading causes the live view to render in the background regardless of what view is actually shown, so it's instantly available when requested. This consumes additional network/CPU resources continually.
auto_play	all	✖️	Whether to automatically play live camera feeds. never will never automatically play, selected will automatically play when a camera is selected in the carousel, visible will automatically play when the browser/tab becomes visible or all on any opportunity to automatically play (i.e. either case). Some live providers (e.g. webrtc-card, jsmpeg) do not support the prevention of automatic play on initial load, but should still respect the value of this flag on play-after-pause.
auto_pause	never	✖️	Whether to automatically pause live camera feeds. never will never automatically pause, unselected will automatically pause when a camera is unselected in the carousel, hidden will automatically pause when the browser/tab becomes hidden or all on any opportunity to automatically pause (i.e. either case). Caution: Some live providers (e.g. jsmpeg) may not offer human-accessible means to resume play if it is paused, unless the auto_play option (above) is used.
auto_mute	all	✖️	Whether to automatically mute live camera feeds. never will never automatically mute, unselected will automatically mute when a camera is unselected in the carousel, hidden will automatically mute when the browser/tab becomes hidden or all on any opportunity to automatically mute (i.e. either case).
auto_unmute	never	✖️	Whether to automatically unmute live camera feeds. never will never automatically unmute, selected will automatically unmute when a camera is unselected in the carousel, visible will automatically unmute when the browser/tab becomes visible or all on any opportunity to automatically unmute (i.e. either case).
lazy_load	true	✖️	Whether or not to lazily load cameras in the camera carousel. Setting this will false will cause all cameras to load simultaneously when the live carousel is opened (or cause all cameras to load continually if both lazy_load and preload are true). This will result in a smoother carousel experience at a cost of (potentially) a substantial amount of continually streamed data.
lazy_unload	never	✖️	When to lazily unload lazyily-loaded cameras. never will never lazily-unload, unselected will lazy-unload a camera when it is unselected in the carousel, hidden will lazy-unload all cameras when the browser/tab becomes hidden or all on any opportunity to lazily unload (i.e. either case). This will cause a reloading delay on revisiting that camera in the carousel but will save the streaming network resources that are otherwise consumed. This option has no effect if lazy_load is false. Some live providers (e.g. webrtc-card) implement their own lazy unloading independently which may occur regardless of the value of this setting.
draggable	true	✖️	Whether or not the live carousel can be dragged left or right, via touch/swipe and mouse dragging.
transition_effect	slide	✖️	Effect to apply as a transition between live cameras. Accepted values: slide or none.
show_image_during_load	true	✅	If true, during the initial stream load, a still image will be shown instead of the loading video stream. This still image will auto-refresh every 1 second and will be replaced with the live stream once loaded.
actions		✅	Actions to use for the live view. See actions below.
controls		✅	Configuration for the live view controls. See below.
jsmpeg		✅	Configuration for the frigate-jsmpeg live provider. See below.
webrtc_card		✅	Configuration for the webrtc-card live provider. See below.
layout		✅	See media layout below.

Live Provider: JSMPEG Configuration

All configuration is under:

live:
  jsmpeg:

Option	Default	Overridable	Description
options		✅	Advanced users only: Control the underlying JSMPEG library options. Supports setting these JSMPEG options {audio, video, pauseWhenHidden, disableGl, disableWebAssembly, preserveDrawingBuffer, progressive, throttled, chunkSize, maxAudioLag, videoBufferSize, audioBufferSize}. This is not necessary for the vast majority of users: only set these flags if you know what you're doing, as you may entirely break video rendering in the card.

Live Provider: WebRTC Card Configuration

All configuration is under:

live:
  webrtc_card:

Option	Default	Overridable	Description
*		✅	Any options specified in the webrtc_card: YAML dictionary are silently passed through to the AlexxIT's WebRTC Card. See WebRTC Configuration for full details this external card provides. This implies that if entity or url are specified here they will override the matching named parameters under the per camera configuration.

See Using WebRTC Card below for more details on how to embed AlexxIT's WebRTC Card with the Frigate Card.

Live Controls: Thumbnails

All configuration is under:

live:
  controls:
    thumbnails:

Option	Default	Overridable	Description
mode	none	✅	Whether to show the thumbnail carousel below the media, above the media, in a drawer to the left or right of the media or to hide it entirely (none).
size	100	✅	The size of the thumbnails in the thumbnail carousel in pixels. Must be >= 75 and <= 175.
show_details	false	✅	Whether to show event details (e.g. duration, start time, object detected, etc) alongside the thumbnail.
show_favorite_control	true	✅	Whether to show the favorite ('star') control on each thumbnail.
show_timeline_control	true	✅	Whether to show the timeline ('target') control on each thumbnail.
media	clips	✅	Whether to show clips or snapshots in the thumbnail carousel in the live view.

Live Controls: Next / Previous

All configuration is under:

live:
  controls:
    next_previous:

Option	Default	Overridable	Description
style	chevrons	✅	When viewing live cameras, what kind of controls to show to move to the previous/next camera. Acceptable values: chevrons, icons, none .
size	48	✅	The size of the next/previous controls in pixels. Must be >= 20.

Live Controls: Title

All configuration is under:

live:
  controls:
    title:

Option	Default	Overridable	Description
mode	popup-bottom-right	✅	How to display the live camera title. Acceptable values: none, popup-top-left, popup-top-right, popup-bottom-left, popup-bottom-right .
duration_seconds	2	✅	The number of seconds to display the title popup. 0 implies forever.

Media Viewer Options

The media_viewer is used for viewing all clip, snapshot or recording media, in a media carousel.

All configuration is under:

media_viewer:

See the fully expanded Media viewer configuration example for how these parameters are structured.

Option	Default	Overridable	Description
auto_play	all	✖️	Whether to automatically play events. never will never automatically play, selected will automatically play when an event is selected in the carousel, visible will automatically play when the browser/tab becomes visible or all on any opportunity to automatically play (i.e. either case).
auto_pause	all	✖️	Whether to automatically pause events. never will never automatically pause, unselected will automatically pause when an event is unselected in the carousel, hidden will automatically pause when the browser/tab becomes hidden or all on any opportunity to automatically pause (i.e. either case).
auto_mute	all	✖️	Whether to automatically mute events. never will never automatically mute, unselected will automatically mute when an event is unselected in the carousel, hidden will automatically mute when the browser/tab becomes hidden or all on any opportunity to automatically mute (i.e. either case).
auto_unmute	never	✖️	Whether to automatically unmute events. never will never automatically unmute, selected will automatically unmute when an event is selected in the carousel, visible will automatically unmute when the browser/tab becomes visible or all on any opportunity to automatically unmute (i.e. either case). Note that some browsers will not allow automated unmute until the user has interacted with the page in some way -- if the user has not then the browser may pause the media instead.
lazy_load	true	✖️	Whether or not to lazily load media in the Media viewer carousel. Setting this will false will fetch all media immediately which may make the carousel experience smoother at a cost of (potentially) a substantial number of simultaneous media fetches on load.
draggable	true	✖️	Whether or not the Media viewer carousel can be dragged left or right, via touch/swipe and mouse dragging.
transition_effect	slide	✖️	Effect to apply as a transition between event media. Accepted values: slide or none.
controls		✖️	Configuration for the Media viewer controls. See below.
actions		✖️	Actions to use for all views that use the media_viewer (e.g. clip, snapshot). See actions below.
layout		✅	See media layout below.

Media Viewer Controls: Next / Previous

All configuration is under:

media_viewer:
  controls:
    next_previous:

Option	Default	Overridable	Description
style	thumbnails	✖️	When viewing media, what kind of controls to show to move to the previous/next media item. Acceptable values: thumbnails, chevrons, none .
size	48	✖️	The size of the next/previous controls in pixels. Must be >= 20.

Media Viewer Controls: Thumbnails

All configuration is under:

media_viewer:
  controls:
    thumbnails:

Option	Default	Overridable	Description
mode	none	✖️	Whether to show the thumbnail carousel below the media, above the media, in a drawer to the left or right of the media or to hide it entirely (none).
size	100	✖️	The size of the thumbnails in the thumbnail carousel pixels. Must be >= 75 and <= 175.
show_details	false	✖️	Whether to show event details (e.g. duration, start time, object detected, etc) alongside the thumbnail.
show_favorite_control	true	✖️	Whether to show the favorite ('star') control on each thumbnail.
show_timeline_control	true	✖️	Whether to show the timeline ('target') control on each thumbnail.

Media Viewer Controls: Title

All configuration is under:

media_viewer:
  controls:
    title:

Option	Default	Overridable	Description
mode	popup-bottom-right	✖️	How to display the Media viewer media title. Acceptable values: none, popup-top-left, popup-top-right, popup-bottom-left, popup-bottom-right .
duration_seconds	2	✖️	The number of seconds to display the title popup. 0 implies forever.

Event Gallery Options

The event_gallery is used for providing an overview of all clips and snapshots in a thumbnail gallery.

All configuration is under:

event_gallery:

See the fully expanded event gallery configuration example for how these parameters are structured.

Option	Default	Overridable	Description
size	100	✖️	The size of the thumbnails in the event gallery in pixels. Must be >= 75 and <= 175.
show_details	false	✖️	Whether to show event details (e.g. duration, start time, object detected, etc) alongside the thumbnail.
show_favorite_control	true	✖️	Whether to show the favorite ('star') control on each thumbnail.
show_timeline_control	true	✖️	Whether to show the timeline ('target') control on each thumbnail.
actions		✖️	Actions to use for all views that use the event_gallery (e.g. clips, snapshots). See actions below.

Image Options

All configuration is under:

image:

See the fully expanded image configuration example for how these parameters are structured.

Option	Default	Overridable	Description
mode	url	✅	Mode of the the image view. Value must be one of url (to fetch an arbitrary image URL), camera (to show a still of the currently selected camera using either camera_entity or webrtc_card.entity in that order of precedence), or screensaver (to show an embedded stock Frigate card logo). In either url or camera mode, the screensaver content is used as a fallback if a URL is not specified or cannot be derived.
url		✅	A static image URL to be used when the mode is set to url or when a temporary image is required (e.g. may appear momentarily prior to load of a camera snapshot in the camera mode). Note that a _t=[timestsamp] query parameter will be automatically added to all URLs such that the image will not be cached by the browser.
refresh_seconds	0	✅	The image will be refreshed at least every refresh_seconds (it may refresh more frequently, e.g. whenever Home Assistant updates its camera security token). 0 implies no refreshing.
actions		✅	Actions to use for the image view. See actions below.

Timeline Options

The timeline is used to show the timing sequence of events and recordings across cameras. You can interact with the timeline in a number of ways:

• Clicking on an event will take you to the media viewer for that event.
• Clicking on the "background", or a camera title, will take you to the recordings for that camera (seeking to the clicked time).
• Clicking on the time axis will take you to recordings for all cameras (seeking to the clicked time).

All configuration is under:

timeline:

See the fully expanded timeline configuration example for how these parameters are structured.

Option	Default	Overridable	Description
window_seconds	3600	✖️	The length of the default timeline in seconds. By default, 1 hour (3600 seconds) is shown in the timeline.
clustering_threshold	3	✖️	The number of overlapping events to allow prior to clustering/grouping them. Higher numbers cause clustering to happen less frequently. 0 disables clustering entirely.
media	all	✖️	Whether to show only events with clips, events with snapshots or all events. When all is used, clips are favored for events that have both a clip and a snapshot.
show_recordings	true	✖️	Whether to show recordings on the timeline (specifically: which hours have any recorded content).
controls		✖️	Configuration for the timeline controls. See below.

Timeline Controls: Thumbnails

All configuration is under:

timeline:
  controls:
    thumbnails:

Option	Default	Overridable	Description
mode	none	✖️	Whether to show the thumbnail carousel below the media, above the media, in a drawer to the left or right of the media or to hide it entirely (none).
size	100	✖️	The size of the thumbnails in the thumbnail carousel in pixels. Must be >= 75 and <= 175.
show_details	false	✖️	Whether to show event details (e.g. duration, start time, object detected, etc) alongside the thumbnail.
show_favorite_control	true	✅	Whether to show the favorite ('star') control on each thumbnail.
show_timeline_control	true	✅	Whether to show the timeline ('target') control on each thumbnail.

Dimensions Options

These options control the aspect-ratio of the entire card to make placement in Home Assistant dashboards more stable. Aspect ratio configuration applies once to the entire card (including the menu, thumbnails, etc), not just to displayed media.

All configuration is under:

dimensions:

See the fully expanded dimensions configuration example for how these parameters are structured.

Option	Default	Overridable	Description
aspect_ratio_mode	dynamic	✅	The aspect ratio mode to use. Acceptable values: dynamic, static, unconstrained. See aspect ratios below.
aspect_ratio	16:9	✅	The aspect ratio to use. Acceptable values: <W>:<H> or <W>/<H>. See aspect ratios below.

dimensions.aspect_ratio_mode:

Option	Description
dynamic	The aspect-ratio of the card will match the aspect-ratio of the last loaded media.
static	A fixed aspect-ratio (as defined by dimensions.aspect_ratio) will be applied to all views.
unconstrained	No aspect ratio is enforced in any view, the card will expand with the content (may be especially useful for a panel-mode dashboard).

dimensions.aspect_ratio:

• 16 / 9 or 16:9: Default widescreen ratio.
• 4 / 3 or 4:3: Default fullscreen ratio.
• <W>/<H> or <W>:<H>: Any arbitrary aspect-ratio.

Aspect Ratio

The card can show live cameras, stored events (clip or snapshot) and an event gallery (clips or snapshots). Of these views, the gallery views have no intrinsic aspect-ratio, whereas the other views have the aspect-ratio of the media.

The card aspect ratio can be changed with the dimensions.aspect_ratio_mode and dimensions.aspect_ratio options described above.

If no aspect ratio is specified or available, but one is needed then 16:9 will be used by default.

Overrides Options

All configuration is a list under:

overrides:

See the fully expanded overrides configuration example for how these parameters are structured.

Various parts of this configuration may conditionally (see Frigate Card Conditions) be overridden, for example to use custom WebRTC parameters for a particular camera or to hide the menu in fullscreen mode.

Not all configuration parameters are overriddable (only those with check marks in this documentation) -- some because it doesn't make sense for that parameter to vary, and many because of the extra complexity of supporting overriding given the lack of compelling usecases (please request new overridable parameters here!).

Each entry under the top-level overrides configuration block should be a list item, that has both of the following parameters set:

Option	Default	Overridable	Description
conditions		✖️	A set of conditions that must evaluate to true in order for the overrides to be applied. See Frigate Card Conditions.
overrides		✖️	Configuration overrides to be applied. Any configuration parameter described in this documentation as 'Overridable' is supported.

Media Layout

The live, media_viewer and image sections all support layout option which is used to control the fit and position of the media within the card dimensions (in order to control the card dimensions themselves see the dimensions parameter ).

As the default card behavior is for the card to always expand to fit the media, these options only make sense if dimensions.aspect_ratio_mode is set to static.

All configuration is under:

live:
  layout:
image:
  layout:
media_viewer:
  layout:

Option	Default	Overridable	Description
fit	contain	✅	If contain, the media is contained within the card and letterboxed if necessary. If cover, the media is expanded proportionally (i.e. maintaining the media aspect ratio) until the card is fully covered. If fill, the media is stretched to fill the card (i.e. ignoring the media aspect ratio). See CSS object-fit for technical details and a visualization.
position		✅	A dictionary that contains an x and y percentage (0 - 100) to control the position of the media when the fit is cover. This can be effectively used to "pan" the media around. At any given time, only one of x and y will have an effect, depending on whether media width is larger than the card width (in which case x controls the position) or the media height is larger than the card height (in which case y controls the position). A value of 0 means maximally to the left or top of the media, a value of 100 means maximally to the right or bottom of the media. See CSS object-position for technical details and a visualization.

If multiple cameras are configured in the card, use overrides to configure different values per camera.

See media layout examples.

Using AlexxIT's WebRTC Card

WebRTC Card support blends the use of the ultra-realtime WebRTC card live view with convenient access to Frigate events/snapshots/UI. A perfect combination!

Note: AlexxIT's WebRTC Integration/Card must be installed and configured separately (see details) before it can be used with this card.

Specifying The WebRTC Card Camera

The WebRTC Card live provider does not support use of Frigate-provided camera entities, as it requires an RTSP stream which Frigate does not currently provide. There are two ways to specify the WebRTC Card source camera:

• Manual setup of separate RTSP camera entities in Home Assistant (see example). These entities will then be available for selection in the GUI card editor for the camera, or can be manually specified with a webrtc_card.entity option under that particular cameras configuration:

cameras:
 - webrtc_card:
     entity: 'camera.front_door_rstp`

• OR manually entering the WebRTC Card camera URL parameter in the GUI card editor, or configuring the url parameter as part of a manual Frigate card configuration, as illustrated in the following example:

cameras:
 - webrtc_card:
     url: 'rtsp://USERNAME:PASSWORD@CAMERA:554/RTSP_PATH'

Other WebRTC Card options may be specified under the live section, like so:

live:
  webrtc_card:
    ui: true

See the WebRTC Card live configuration above, and the external WebRTC Card configuration documentation for full configuration options that can be used here.

Frigate Card Conditions

Conditions are used to apply certain configuration depending on runtime evaluations. Conditions may be used in elements configuration (as part of a custom:frigate-card-conditional element) or the overrides configuration (see below for both).

All variables listed are under a conditions: section.

Condition	Description
view	A list of views in which this condition is satified (e.g. clips)
camera	A list of camera ids in which this condition is satisfied. See camera IDs.
fullscreen	If true the condition is satisfied if the card is in fullscreen mode. If false the condition is satisfied if the card is NOT in fullscreen mode.
state	A list of state conditions to compare with Home Assistant state. See below.
mediaLoaded	If true the condition is satisfied if there is media loadED (not loadING) in the card (e.g. a clip, snapshot or live view). This may be used to hide controls during media loading or when a message (not media) is being displayed. Note that if true this condition will never be satisfied for views that do not themselves load media directly (e.g. gallery).

See the example below for a real-world example of how these conditions can be used.

State Conditions

- conditions:
    state:
      - [entries]

The Frigate Card Condition can compare HA state against fixed string values. This is the same as the Home Assistant Conditional Element condition, but can be used outside of a Picture Element context (e.g. card configuration overrides).

If multiple entries are provided, the results are ANDed.

Parameter	Description
entity	The entity ID to check the state for
state	Condition will be met if state is equal to this optional string.
state_not	Condition will be met if state is unequal to this optional string.

See the Menu override example below for an illustration.

Picture Elements / Menu Customizations

This card supports the Picture Elements configuration syntax to seamlessly allow the user to add custom elements to the card, which may be configured to perform a variety of actions on interaction (see actions below). The configuration is fairly versatile and can be simple, or very complex depending on the desires of the user.

All configuration is under:

elements:

See the fully expanded elements configuration example for how these parameters are structured.

Note: The Frigate Card allows either a single action (as in stock Home Assistant) or list of actions to be defined for each class of user interaction (e.g. tap, double_tap, hold, etc). See an example of multiple actions.

Special Elements

This card supports all Picture Elements using compatible syntax. The card also supports a handful of custom special elements to add special Frigate card functionality.

Element name	Description
custom:frigate-card-menu-icon	Add an arbitrary icon to the Frigate Card menu. Configuration is ~identical to that of the Picture Elements Icon except with a type name of custom:frigate-card-menu-icon.
custom:frigate-card-menu-state-icon	Add a state icon to the Frigate Card menu that represents the state of a Home Assistant entity. Configuration is ~identical to that of the Picture Elements State Icon except with a type name of custom:frigate-card-menu-state-icon.
custom:frigate-card-menu-submenu	Add a configurable submenu dropdown. See configuration below.
custom:frigate-card-menu-submenu-select	Add a submenu based on a select or input_select. See configuration below.
custom:frigate-card-conditional	Restrict a set of elements to only render when the card is showing particular a particular view. See configuration below.
custom:frigate-card-ptz	Add a PTZ (Pan Tilt Zoom) controller overlay. See configuration below.

Note: ℹ️ Manual positioning of custom menu icons or submenus via the style parameter is not supported as the menu buttons displayed are context sensitive so manual positioning by the user is not feasible.

custom:frigate-card-menu-submenu

Parameters for the custom:frigate-card-menu-submenu element are identical to the parameters of the stock Home Assistant Icon Element with the exception of these parameters which differ:

Parameter	Description
type	Must be custom:frigate-card-menu-submenu.
items	A list of menu items, as described below.

Submenu Items

Parameter	Default	Description
title		An optional title to display.
icon		An optional item icon to display, e.g. mdi:car
entity		An optional Home Assistant entity from which title, icon and style can be automatically computed.
state_color	true	Whether or not the title and icon should be stylized based on state.
selected	false	Whether or not to show this item as selected.
enabled	true	Whether or not to show this item as enabled / selectable.
style		Position and style the element using CSS.
tap_action, double_tap_action, hold_action, start_tap, end_tap		Home Assistant action configuration including the extended functionality described under actions.

See the Configuring a Submenu example.

custom:frigate-card-menu-submenu-select

This element allows you to easily convert a Home Assistant Select Entity or Home Assistant Input Select Entity (an entity either starting with select or input_select) into an overridable submenu. This could be done by hand using a regular submenu (above) -- this element is a convenience.

Parameters for the custom:frigate-card-menu-submenu-select element are identical to the parameters of the stock Home Assistant State Icon Element with the exception of these parameters which differ:

Parameter	Description
type	Must be custom:frigate-card-menu-submenu-select.
options	An optional dictionary of overrides keyed by the option name that the given select entity supports. These options can be used to set or override submenu item parameters on a per-option basis. The format is as described in Submenu Items above.

See the Configuring a Select Submenu example.

custom:frigate-card-conditional

Parameters for the custom:frigate-card-conditional element:

Parameter	Description
type	Must be custom:frigate-card-conditional.
elements	The elements to render. Can be any supported element, include additional condition or custom elements.
conditions	A set of conditions that must evaluate to true in order for the elements to be rendered. See Frigate Card Conditions.

custom:frigate-card-ptz

Parameters for the custom:frigate-card-ptz element:

Parameter	Default	Description
type		Must be custom:frigate-card-ptz.
style	translate(-50%, -50%)	Position and style the element using CSS. See Picture Element styling.
orientation	vertical	Whether to show a vertical or horizontal PTZ control.
actions_left, actions_right, actions_up, actions_down, actions_zoom_in, actions_zoom_out, actions_home	The Home Assistant actions to call when this icon is interacted with.
data_left, data_right, data_up, data_down, data_zoom_in, data_zoom_out, data_home	Shorthand for a tap_action that calls the service with the data provided in this argument. Internally, this is just translated into the longer-form actions_[button]. If both actions_X and data_X are specified, actions_X takes priority. This is compatible with AlexxIT's WebRTC Card PTZ configuration.
service		An optional Home Assistant service to call when the data_ parameters are used.

Special Actions

custom:frigate-card-action

Parameter	Description
action	Must be custom:frigate-card-action.
frigate_card_action	Call a Frigate Card action. Acceptable values are default, clip, clips, image, live, snapshot, snapshots, download, timeline, frigate_ui, fullscreen, camera_select, menu_toggle, media_player.

Command descriptions

Value	Description
default	Trigger the default view.
clip, clips, image, live, snapshot, snapshots	Trigger the named view.
download	Download the displayed media.
frigate_ui	Open the Frigate UI at the configured URL.
fullscreen	Toggle fullscreen.
camera_select	Select a given camera. Takes a single additional camera parameter with the camera ID of the camera to select. Respects the value of view.camera_select to choose the appropriate view on the new camera.
menu_toggle	Show/hide the menu (for the hidden mode style).
media_player	Perform a media player action. Takes a media_player parameter with the entity ID of the media_player on which to perform the action, and a media_player_action parameter which should be either play or stop to play or stop the media in question.

Views

This card supports several different views:

Key	Description
live (default)	Shows the live camera view with the configured live provider.
snapshots	Shows an event gallery of snapshots for this camera/zone/label.
snapshot	Shows a Media viewer for the most recent snapshot for this camera/zone/label. Can also be accessed by holding down the snapshots menu icon.
clips	Shows an event gallery of clips for this camera/zone/label.
clip	Shows a Media viewer for the most recent clip for this camera/zone/label. Can also be accessed by holding down the clips menu icon.
image	Shows a static image specified by the image parameter, can be used as a discrete default view or a screensaver (via view.timeout_seconds).

Navigating From A Snapshot To A Clip

Clicking on a snapshot will take the user to a clip that was taken at the ~same time as the snapshot (if any).

Actions

Introduction to Actions

Actions are pre-configured activities that can be triggered in response to a variety of circumstances (e.g. tapping on a menu icon, double tapping on a picture element or holding the mouse/tap down on a particular view).

Configuring Actions

The format for actions is the standard Home Assistant action format, with the exception of differences called out below.

Differences in actions between Frigate Card and Home Assistant

Both the Home Assistant frontend and the Frigate card cooperate to provide action functionality. In general, the Frigate Card functionality is a superset of that offered by stock Home Assistant.

Stock action functionality is used for Stock Home Assistant picture elements. Extended Frigate card behavior covers all other interactions on the Frigate card (e.g. menu icon elements, submenus and actions on the card or views).

Custom action types: start_tap and end_tap

The card has partial support for two special action types start_tap and end_tap which occur when a tap is started (e.g. mouse is pressed down / touch begins), and ended (e.g. mouse released / touch ends) respectively. This might be useful for PTZ cameras cameras to start/stop movement on touch. Network latency may introduce unavoidable imprecision between end_tap and action actually occurring.

Multiple actions

Extended Frigate card behavior supports a list of actions which will be handled, in addition to using a singular action. See an example of multiple actions below.

Card & View Actions

Actions may be attached to the card itself, to trigger action when the card experiences a tap, double_tap, hold, start_tap or end_tap event. These actions can be specified both for the overall card and for individual groups of view.

Configuration path	Views to which it refers
view.actions	All (may be overriden by the below)
media_viewer.actions	clip, snapshot
event_gallery.actions	clips, snapshots
live.actions	live
image.actions	image

If an action is configured for both the whole card (view.actions) and a more specific view (e.g. live.actions) then the actions are merged, with the more specific overriding the less specific (see example below).

Note: The card itself relies on user interactions to function (e.g. tap on the menu should activate that button, tap on a gallery thumbnail should open that piece of media, etc). Efforts are taken to de-duplicate interactions (e.g. card-wide actions will not be activated through interaction with menu buttons, next/previous controls, thumbnails, etc), but in some cases this is not possible (e.g. embedded WebRTC card controls) -- in these cases duplicate actions may occur with certain configurations (e.g. tap).

Note: Card-wide actions are not supported on the timeline view, nor when a info/error message is being displayed.

Menu Styles

This card supports several menu styles.

Key	Description	Screenshot
hidden	Hide the menu by default, expandable upon clicking the Frigate button.
overlay	Overlay the menu over the card contents. The Frigate button shows the default view.
hover	Overlay the menu over the card contents when the mouse is over the menu, otherwise it is not shown. The Frigate button shows the default view.
outside	Render the menu outside the card (i.e. above it if position is top, or below it if position is bottom). The Frigate button shows the default view.
none	No menu is shown.

Screenshots

Live Viewing of Multiple Cameras

Scroll through your live cameras, or choose from a menu. Seamlessly supports cameras of different dimensions, and custom submenus per camera.

Full Viewing Of Events

Live Viewing With Thumbnail Carousel

Clip Viewing With Thumbnail Carousel

Hover Menu / Thumbnail Next & Previous Controls

Card Editing

This card supports full editing via the Lovelace card editor. Additional arbitrary configuration for WebRTC Card may be specified in YAML mode.

Configurable Submenus

This card supports fully configurable submenus.

Select Entity Submenus

Automatically generate submenus from select entities.

Cast media from the card

Cast media from the card to a local player.

Scan Mode

Automatically choose the camera with the action!

Thumbnail Drawers

View thumbnails in side-drawers.

Event Timeline

View events in the timeline.

Single Camera Recordings

View recordings for a camera across time:

Multiple Camera Recordings

View recordings for multiple cameras at a given time:

Dark Mode

Dim the card when not used.

Card Casting

A dashboard with the card can be cast onto a suitable device (such as the Nest Hub shown below).

Event starring

Retain interesting Frigate events forever:

PTZ Control

Control a PTZ camera:

Media Layout

Pan around a large camera view to only show part of the video feed in the card at a different aspect ratio:

Before

After

Examples

Illustrative Expanded Configuration Reference

Caution: 🚩 Just copying this full reference into your configuration will cause you a significant maintenance burden. Don't do it! Please only specify what you need as defaults can / do change continually as this card develops. Almost all the values shown here are the defaults (except in cases where is no default, parameters are added here for illustrative purposes).

Expand: Cameras section

Reference: Camera Options.

cameras:
  - camera_entity: camera.front_Door
    live_provider: ha
    frigate:
      url: http://my.frigate.local
      client_id: frigate
      camera_name: front_door
      label: person
      zone: steps
    # Show events for camera-2 when this camera is viewed.
    dependencies:
      all_cameras: false
      cameras:
        - camera-2
    triggers:
      motion: false
      occupancy: true
      entities:
        - binary_sensor.front_door_sensor
  - camera_entity: camera.entrance
    live_provider: webrtc-card
    frigate:
      url: http://my-other.frigate.local
      client_id: frigate-other
      camera_name: entrance
      label: car
      zone: driveway
    icon: 'mdi:car'
    title: 'Front entrance'
    # Custom identifier for the camera to refer to it above.
    id: 'camera-2'
    webrtc_card:
      entity: camera.entrance_rtsp
      url: 'rtsp://username:password@camera:554/av_stream/ch0'
    triggers:
      motion: false
      occupancy: true
      entities:
        - binary_sensor.entrance_sensor
    dependencies:
      all_cameras: false

Expand: View section

Reference: View Options.

view:
  default: live
  camera_select: current
  timeout_seconds: 300
  update_seconds: 0
  update_force: false
  update_cycle_camera: false
  update_entities:
    - binary_sensor.my_motion_sensor
  render_entities:
    - switch.render_card
  dark_mode: 'off'
  scan:
    enabled: false
    show_trigger_status: true
    untrigger_reset: true
    untrigger_seconds: 0
  actions:
    entity: light.office_main_lights
    tap_action:
      action: none
    hold_action:
      action: none
    double_tap_action:
      action: none
    start_tap_action:
      action: none
    end_tap_action:
      action: none

Expand: Menu section

Reference: Menu Options.

menu:
  style: hidden
  position: top
  alignment: left
  buttons:
    frigate:
      priority: 50
      enabled: true
      alignment: matching
      # Default icon is an internal coded Frigate icon. Note
      # absence of 'mdi' here (mdi has no Frigate icon).
      icon: frigate
    cameras:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:video-switch
    live:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:cctv
    clips:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:filmstrip
    snapshots:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:camera
    image:
      priority: 50
      enabled: false
      alignment: matching
      icon: mdi:image
    timeline:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:chart-gantt
    download:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:download
    frigate_ui:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:web
    fullscreen:
      priority: 50
      enabled: true
      alignment: matching
      icon: mdi:fullscreen
    media_player:
      priority: 50
      enabled: false
      alignment: matching
      icon: mdi:cast
  button_size: 40

Expand: Live section

Reference: Live Options.

live:
  auto_play: all
  auto_pause: never
  auto_mute: all
  auto_unmute: never
  preload: false
  lazy_load: true
  lazy_unload: never
  draggable: true
  transition_effect: slide
  webrtc_card:
    # Arbitrary WebRTC Card options, see https://github.com/AlexxIT/WebRTC#configuration .
    ui: true
  jsmpeg:
    options:
      audio: false
      video: true
      pauseWhenHidden: false
      disableGl: false
      disableWebAssembly: false
      preserveDrawingBuffer: false
      progressive: true
      throttled: true
      chunkSize: 1048576
      maxAudioLag: 10
      videoBufferSize: 524288
      audioBufferSize: 131072
  controls:
    next_previous:
      style: chevrons
      size: 48
    thumbnails:
      media: clips
      size: 100
      show_details: false
      show_favorite_control: true
      show_timeline_control: true
      mode: none
    title:
      mode: popup-bottom-right
      duration_seconds: 2
  layout:
    fit: contain
    position:
      x: 50
      y: 50
  actions:
    entity: light.office_main_lights
    tap_action:
      action: none
    hold_action:
      action: none
    double_tap_action:
      action: none
    start_tap_action:
      action: none
    end_tap_action:
      action: none

Expand: Media Viewer section

Reference: Media Viewer Options.

media_viewer:
  auto_play: all
  auto_pause: all
  auto_mute: all
  auto_unmute: never
  lazy_load: true
  draggable: true
  transition_effect: slide
  controls:
    next_previous:
      size: 48
      style: thumbnails
    thumbnails:
      size: 100
      mode: none
      show_details: false
      show_favorite_control: true
      show_timeline_control: true
    title:
      mode: popup-bottom-right
      duration_seconds: 2
  layout:
    fit: contain
    position:
      x: 50
      y: 50
  actions:
    entity: light.office_main_lights
    tap_action:
      action: none
    hold_action:
      action: none
    double_tap_action:
      action: none
    start_tap_action:
      action: none
    end_tap_action:
      action: none

Expand: Event Gallery section

Reference: Event Gallery Options.

event_gallery:
  controls:
    thumbnails:
      size: 100
      show_details: false
      show_favorite_control: true
      show_timeline_control: true
  actions:
    entity: light.office_main_lights
    tap_action:
      action: none
    hold_action:
      action: none
    double_tap_action:
      action: none
    start_tap_action:
      action: none
    end_tap_action:
      action: none

Expand: Image section

Reference: Image Options.

image:
  mode: url
  refresh_seconds: 0
  layout:
    fit: contain
    position:
      x: 50
      y: 50
  actions:
    entity: light.office_main_lights
    tap_action:
      action: none
    hold_action:
      action: none
    double_tap_action:
      action: none
    start_tap_action:
      action: none
    end_tap_action:
      action: none

Expand: Elements section (stock Home Assistant elements)

Reference: Home Assistant Picture Elements

Actions are omitted for simplicity, see the next section for action examples.

elements:
  - type: state-badge
    entity: sensor.kitchen_dining_multisensor_air_temperature
    style:
      left: 100px
      top: 50px
    title: "Temperature"
  - type: state-icon
    entity: light.office_main_lights
    icon: mdi:lamp
    state_color: true
    style:
      left: 100px
      top: 100px
  - type: state-label
    entity: sensor.kitchen_motion_sensor_battery
    attribute: battery_voltage
    prefix: Volts
    title: Battery Voltage
    style:
      left: 100px
      top: 150px
  - type: state-label
    entity: sensor.kitchen_motion_sensor_battery
    attribute: battery_voltage
    prefix: 'Volts: '
    title: Battery Voltage
    style:
      background-color: black
      left: 100px
      top: 200px
  - type: service-button
    title: Light on
    service: homeassistant.turn_on
    service_data:
      entity: light.office_main_lights
    style:
      left: 100px
      top: 250px
  - type: icon
    icon: mdi:cow
    title: Moo
    style:
      left: 100px
      top: 300px
  - type: image
    entity: light.office_main_lights
    title: Image
    state_image:
      on: "https://picsum.photos/id/1003/1181/1772"
      off: "https://picsum.photos/id/102/4320/3240"
    state_filter:
      "on": brightness(110%) saturate(1.2)
      "off": brightness(50%) hue-rotate(45deg)
    style:
      left: 100px
      top: 350px
      height: 50px
      width: 100px
  - type: conditional
    conditions:
      - entity: light.office_main_lights
        state: on
        state_not: off
    elements:
    - type: icon
      icon: mdi:dog
      title: Woof
      style:
        left: 100px
        top: 400px

Expand: Elements section (stock Home Assistant actions)

Reference: Home Assistant Actions, Frigate Card Actions.

elements:
  - type: icon
    icon: mdi:numeric-1-box
    title: More info action
    style:
      left: 200px
      top: 50px
    entity: light.office_main_lights
    tap_action:
      action: more-info
  - type: icon
    icon: mdi:numeric-2-box
    title: Toggle action
    style:
      left: 200px
      top: 100px
    entity: light.office_main_lights
    tap_action:
      action: toggle
  - type: icon
    icon: mdi:numeric-3-box
    title: Call Service action
    style:
      left: 200px
      top: 150px
    tap_action:
      action: call-service
      service: homeassistant.toggle
      service_data:
        entity_id: light.office_main_lights
  - type: icon
    icon: mdi:numeric-4-box
    title: Navigate action
    style:
      left: 200px
      top: 200px
    tap_action:
      action: navigate
      navigation_path: /lovelace/2
  - type: icon
    icon: mdi:numeric-5-box
    title: URL action
    style:
      left: 200px
      top: 250px
    tap_action:
      action: url
      url_path: https://www.home-assistant.io/
  - type: icon
    icon: mdi:numeric-6-box
    title: None action
    style:
      left: 200px
      top: 300px
    tap_action:
      action: none
  - type: icon
    icon: mdi:numeric-7-box
    title: Custom action
    style:
      left: 200px
      top: 350px
    tap_action:
      action: fire-dom-event
      key: value

Expand: Elements section (custom elements)

Reference: Custom Frigate Card Elements

elements:
  - type: custom:frigate-card-menu-icon
    icon: mdi:car
    title: Vroom
  - type: custom:frigate-card-menu-state-icon
    entity: light.office_main_lights
    title: Office lights
    icon: mdi:chair-rolling
    state_color: true
  - type: custom:frigate-card-menu-submenu
    icon: mdi:menu
    items:
      - title: Lights
        icon: mdi:lightbulb
        entity: light.office_main_lights
        tap_action:
          action: toggle
      - title: Google
        icon: mdi:google
        enabled: false
        tap_action:
          action: url
          url_path: https://www.google.com
  - type: custom:frigate-card-menu-submenu-select
    icon: mdi:lamps
    entity: input_select.kitchen_scene
    options:
      scene.kitchen_cooking_scene:
        icon: mdi:chef-hat
        title: Cooking time!
      scene.kitchen_tv_scene:
        icon: mdi:television
        title: TV!
    # Show a pig icon if the card is in the live view, in fullscreen mode, light.office_main_lights is on and the media has been loaded.
  - type: custom:frigate-card-conditional
    elements:
      - type: icon
        icon: mdi:pig
        title: Oink
        style:
          left: 300px
          top: 100px
    conditions:
      view:
        - live
      fullscreen: true
      camera:
        - camera.front_door
      state:
        - entity: light.office_main_lights
          state: on
          state_not: off
      mediaLoaded: true
    # Full form PTZ actions (only left button shown).
  - type: custom:frigate-card-ptz
    orientation: vertical
    style:
      transform: none
      right: 5%
      top: 50%
    actions_left:
      tap_action:
        action: call-service
        service: sonoff.send_command
        service_data:
          device: '048123'
          cmd: left 
    # Equivalent short form PTZ actions (only left button shown)
  - type: custom:frigate-card-ptz
    orientation: vertical
    style:
      transform: none
      right: 20px
      top: 180px
    service: sonoff.send_command
    data_left:
      device: '048123'
      cmd: left

Expand: Elements section (custom actions)

Reference: Custom Frigate Card Actions

elements:
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-a-circle
    title: Show default view
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: default
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-b-circle
    title: Show most recent clip
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: clip
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-c-circle
    title: Show clips
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: clips
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-d-circle
    title: Show image view
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: image
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-e-circle
    title: Show live view
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: live
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-f-circle
    title: Show most recent snapshot
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: snapshot
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-g-circle
    title: Show snapshots
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: snapshots
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-h-circle
    title: Download media
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: download
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-i-circle
    title: Open Frigate UI
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: frigate_ui
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-j-circle
    title: Change to fullscreen
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: fullscreen
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-k-circle
    title: Toggle hidden menu
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: menu_toggle
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-l-circle
    title: Select Front Door
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: camera_select
      camera: camera.front_door
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-m-circle
    title: Media player play
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: media_player
      media_player: media_player.nesthub50be
      media_player_action: play
  - type: custom:frigate-card-menu-icon
    icon: mdi:alpha-n-circle
    title: Media player stop
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: media_player
      media_player: media_player.nesthub
      media_player_action: stop

Expand: Dimensions section

Reference: Dimension Options.

dimensions:
  aspect_ratio_mode: dynamic
  aspect_ratio: 16:9

Expand: Timeline section

Reference: Timeline Options.

timeline:
  clustering_threshold: 3
  media: all
  show_recordings: true
  window_seconds: 3600
  controls:
    thumbnails:
      mode: left
      size: 100
      show_details: true
      show_favorite_control: true
      show_timeline_control: true

Expand: Overrides section

Reference: Override Options.

Overrides allow overriding certain (many) configuration parameters when a given condition is met. The below is a fully expanded set of those overridable parameters. This is really just repeating the above expansions of the relevant sections, rather than indicating new or different parameters, i.e. this repetition is included for illustrative purposes of what is overridable.

overrides:
  - conditions:
      view:
        - live
      fullscreen: true
      camera:
        - camera.front_door
      state:
        - entity: light.office_main_lights
          state: on
          state_not: off
    overrides:
      live:
        webrtc_card:
          ui: true
        jsmpeg:
          options:
            audio: false
            video: true
            pauseWhenHidden: false
            disableGl: false
            disableWebAssembly: false
            preserveDrawingBuffer: false
            progressive: true
            throttled: true
            chunkSize: 1048576
            maxAudioLag: 10
            videoBufferSize: 524288
            audioBufferSize: 131072
        controls:
          next_previous:
            style: chevrons
            size: 48
          thumbnails:
            media: clips
            size: 100
            show_details: false
            show_favorite_control: true
            show_timeline_control: true
            mode: none
          title:
            mode: popup-bottom-right
            duration_seconds: 2
        actions:
          entity: light.office_main_lights
          tap_action:
            action: none
          hold_action:
            action: none
          double_tap_action:
            action: none
          start_tap_action:
            action: none
          end_tap_action:
            action: none
      menu:
        style: hidden
        position: top
        alignment: left
        buttons:
          frigate:
            priority: 50
            enabled: true
            alignment: matching
            # Default icon is an internal coded Frigate icon. Note
            # absence of 'mdi' here (mdi has no Frigate icon).
            icon: frigate
          cameras:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:video-switch
          live:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:cctv
          clips:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:filmstrip
          snapshots:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:camera
          image:
            priority: 50
            # Disable the image button.
            enabled: false
            alignment: matching
            icon: mdi:image
          timeline:
            # Ensure the timeline button is ordered earlier.
            priority: 100
            enabled: true
            alignment: matching
            icon: mdi:chart-gantt
          download:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:download
          frigate_ui:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:web
          fullscreen:
            priority: 50
            enabled: true
            alignment: matching
            icon: mdi:fullscreen
          media_player:
            priority: 50
            enabled: false
            alignment: matching
            icon: mdi:cast
        button_size: 40
      image:
        mode: url
        refresh_seconds: 0
        actions:
          entity: light.office_main_lights
          tap_action:
            action: none
          hold_action:
            action: none
          double_tap_action:
            action: none
          start_tap_action:
            action: none
          end_tap_action:
            action: none
      view:
        default: live
        camera_select: current
        timeout_seconds: 300
        update_seconds: 0
        update_force: false
        update_cycle_camera: false
        update_entities:
          - binary_sensor.my_motion_sensor
        render_entities:
          - switch.render_card
        dark_mode: 'off'
        actions:
          entity: light.office_main_lights
          tap_action:
            action: none
          hold_action:
            action: toggle
          double_tap_action:
            action: none
          start_tap_action:
            action: none
          end_tap_action:
            action: none

Basic cameras configuration

Expand: Basic cameras configuration

type: custom:frigate-card
cameras:
  - camera_entity: camera.sitting_room
  - camera_entity: camera.front_door

Expand: Different providers for a single camera

Cameras can be repeated with different providers (note the required use of id to provide a separate unambiguous way of referring to that camera, since the camera_entity is shared between the two cameras).

type: custom:frigate-card
cameras:
  - camera_entity: camera.front_door
    live_provider: frigate-jsmpeg
    title: Front Door (JSMPEG)
  - camera_entity: camera.front_door
    live_provider: webrtc-card
    title: Front Door (WebRTC)
    webrtc_card:
      entity: camera.front_door_rtsp
    id: front-door-webrtc

WebRTC Card Provider

Expand: Basic WebRTC Card configuration with UI enabled

type: custom:frigate-card
cameras:
  - camera_entity: camera.front_door
    live_provider: webrtc-card
    title: Front Door
    webrtc_card:
      entity: camera.front_door_rtsp
live:
  webrtc_card:
    ui: true

Static Aspect Ratios

You can set a static aspect ratio.

Expand: Static 4:3 aspect ratios

[...]
dimensions:
  aspect_ratio_mode: static
  aspect_ratio: '4:3'

Adding Menu Icons

You can add custom icons to the menu with arbitrary actions.

Expand: Custom menu icon

This example adds an icon that navigates the browser to the releases page for this card:

[...]
elements:
  - type: custom:frigate-card-menu-icon
    icon: mdi:book
    tap_action:
      action: url
      url_path: https://github.com/dermotduffy/frigate-hass-card/releases

Adding Menu State Icons

You can add custom state icons to the menu to show the state of an entity and complete arbitrary actions.

Expand: Custom menu state icon

This example adds an icon that represents the state of the light.office_main_lights entity, that toggles the light on double click.

[...]
elements:
  - type: custom:frigate-card-menu-state-icon
    entity: light.office_main_lights
    tap_action:
      action: toggle

Adding State Badges

You can add a state badge to the card showing arbitrary entity states.

Expand: State badge

This example adds a state badge showing the temperature and hides the label text:

[...]
elements:
  - type: state-badge
    entity: sensor.kitchen_temperature
    style:
      right: '-20px'
      top: 100px
      color: rgba(0,0,0,0)
      opacity: 0.5

Adding State Badges

You can have icons conditionally added to the menu based on entity state.

Expand: Conditional menu icons

This example only adds the light entity to the menu if a light is on.

[...]
elements:
  - type: conditional
    conditions:
      - entity: light.kitchen
        state: 'on'
    elements:
      - type: custom:frigate-card-menu-state-icon
        entity: light.kitchen
        tap_action:
          action: toggle

Restricting Icons To Certain Views

You can restrict icons to only show for certain views using a custom:frigate-card-conditional element

Expand: View-based conditions

This example shows a car icon that calls a service but only in the live view.

[...]
elements:
  - type: custom:frigate-card-conditional
    conditions:
      view:
        - live
    elements:
      - type: icon
        icon: mdi:car
        style:
          background: rgba(255, 255, 255, 0.25)
          border-radius: 5px
          right: 25px
          bottom: 50px
        tap_action:
          action: call-service
          service: amcrest.ptz_control
          service_data:
            entity_id: camera.kitchen
            movement: up

Triggering Card Actions

You can control the card itself with the custom:frigate-card-action action.

Expand: Custom fullscreen button

This example shows an icon that toggles the card fullscreen mode.

[...]
elements:
  - type: icon
    icon: mdi:fullscreen
    style:
      left: 40px
      top: 40px
    tap_action:
      action: custom:frigate-card-action
      frigate_card_action: fullscreen

Adding Card-wide Actions

You can add actions to the card to be trigger on tap, double_tap, hold, start_tap or end_tap. See actions above.

Expand: Adding a card-wide action

In this example double clicking the card in any view will cause the card to go into fullscreen mode, except when the view is live in which case the office lights are toggled.

[...]
view:
  actions:
    double_tap_action:
      action: custom:frigate-card-action
      frigate_card_action: fullscreen
live:
  actions:
    entity: light.office_main_lights
    double_tap_action:
      action: toggle

Configuring a submenu

You can add submenus to the menu -- buttons that when pressed reveal a dropdown submenu of configurable options.

Expand: Adding a submenu

This example shows a submenu that illustrates a variety of actions.

[...]
elements:
  - type: custom:frigate-card-menu-submenu
    icon: mdi:menu
    items:
      - title: Lights
        icon: mdi:lightbulb
        entity: light.office_main_lights
        tap_action:
          action: toggle
      - title: Google
        icon: mdi:google
        tap_action:
          action: url
          url_path: https://www.google.com
      - title: Fullscreen
        icon: mdi:fullscreen
        tap_action:
          action: custom:frigate-card-action
          frigate_card_action: fullscreen

Expand: Custom submenus per camera

This example shows submenus conditional on the camera selected.

[...]
elements:
  - type: custom:frigate-card-conditional
    conditions:
      camera:
        - camera.front_door
    elements:
      - type: custom:frigate-card-menu-submenu
        icon: mdi:door
        items:
          - title: Front Door Lights
            icon: mdi:lightbulb
            entity: light.front_door_lights
            tap_action:
              action: toggle
  - type: custom:frigate-card-conditional
    conditions:
      camera:
        - camera.living_room
    elements:
      - type: custom:frigate-card-menu-submenu
        icon: mdi:sofa
        items:
          - title: Living Room Lights
            icon: mdi:lightbulb
            entity: light.living_room_lights
            tap_action:
              action: toggle
          - title: Living Room Lamp
            icon: mdi:lightbulb
            entity: light.living_room_lamp
            tap_action:
              action: toggle

Configuring a select submenu

You can easily add a submenu to the menu based on a select or input_select entity.

Expand: Adding a select submenu

This example imagines the user has an input_select entity configured in their Home Assistant configuration like so:

input_select:
  kitchen_scene:
    name: Kitchen Scene Select
    options:
      - scene.kitchen_cooking_scene
      - scene.kitchen_tv_scene
    icon: mdi:lightbulb

The following will convert this entity into a submenu:

[...]
elements:
  - type: custom:frigate-card-menu-submenu-select
    entity: input_select.kitchen_scene

To override 1 or more individual options (e.g. to set custom icons and titles)

[...]
elements:
  - type: custom:frigate-card-menu-submenu-select
    icon: mdi:lamps
    entity: input_select.kitchen_scene
    options:
      scene.kitchen_cooking_scene:
        icon: mdi:chef-hat
        title: Cooking time!
      scene.kitchen_tv_scene:
        icon: mdi:television
        title: TV!

Overriding card behavior

You can override card configuration when certain conditions are met.

Expand: Hiding the menu in fullscreen mode

This example disables the menu unless the card is in fullscreen mode, and uses a card-wide action to enable fullscreen mode on double_tap:

view:
  actions:
    double_tap_action:
      action: custom:frigate-card-action
      frigate_card_action: fullscreen
overrides:
  - conditions:
      fullscreen: true
    overrides:
      menu:
        style: none

Expand: Enable WebRTC Card UI only for a selected camera

This example enables WebRTC Card UI mode for a particular camera.

cameras:
 - camera_entity: camera.office
   live_provider: webrtc-card
 - camera_entity: camera.a-different-camera
[...]
overrides:
  - conditions:
      camera:
        - camera.office
    overrides:
      live:
        webrtc_card:
          ui: true

Expand: Change the menu position based on HA state

overrides:
  - conditions:
      state:
        - entity: light.office_lights
          state: 'on'
    overrides:
      menu:
        position: bottom

Expand: Change the default view based on HA state

This example changes the default card view from live to image depending on the value of the binary_sensor.alarm_armed sensor. Note that the override alone will only change the default when the card next is requested to change to the default view. By also including the update_entities parameter, we ask the card to trigger a card update based on that entity -- which causes it to use the new overriden default immediately. Alternatives to trigger the card to change view but without update_entities would just be having an update_seconds parameter which reloads the default view that many seconds after user interaction stops or through the use of the triggers option for a given camera (see Trigger Configuration).

view:
  default: live
  update_entities:
    - binary_sensor.alarm_armed
overrides:
  - conditions:
      state:
        - entity: binary_sensor.alarm_armed
          state: 'off'
    overrides:
      view:
        default: image

Refreshing a static image

Expand: Auto-refreshing a static image

This example fetches a static image every 10 seconds (in this case the latest image saved on the Frigate server for a given camera).

[...]
view:
  default: image
image:
  src: https://my-friage-server/api/living_room/latest.jpg
  refresh_seconds: 10

Defining multiple actions for Elements

Expand: Changing camera and view simultaneously

This example shows how to configure multiple actions for a single Frigate card user interaction, in this case both selecting a different camera and changing the view on tap. Note that multiple actions are not supported on stock Picture Elements, see actions for more information.

[...]
elements:
  - type: custom:frigate-card-menu-icon
    icon: mdi:chair-rolling
    tap_action:
      - action: custom:frigate-card-action
        frigate_card_action: camera_select
        camera: camera.office
      - action: custom:frigate-card-action
        frigate_card_action: live

Using a PTZ picture element

The card supports a custom PTZ element (custom:frigate-card-ptz) to conveniently control pan, tilt and zoom for cameras.

Expand: Using the native PTZ picture element

This example shows the native PTZ element when the live or image view is displayed and the stream (media) has loaded.

[...]
elements:
  - type: custom:frigate-card-conditional
    conditions:
      mediaLoaded: true
      view:
        - live
        - image
    elements:
      - type: custom:frigate-card-ptz
        orientation: horizontal
        style:
          transform: none
          right: 20px
          top: 180px
        service: sonoff.send_command
        data_left:
          device: '048123'
          cmd: left
        data_right:
          device: '048123'
          cmd: right
        data_up:
          device: '048123'
          cmd: up
        data_down:
          device: '048123'
          cmd: down

Using card-mod to style the card

This card allows the use of card-mod to style arbitrary card contents. card-mod can be complex to use and relies on the underlying internal DOM structure to style elements -- as such, while its use is possible it's not officially supported and no attempt is made to preserve backwards compatability of the internal DOM between any versions. It'll look good, but you're on your own!

Expand: Use card-mod to style a Picture elements label

This example changes the color and removes the padding around a Picture Elements state label.

[...]
card_mod:
  style:
    frigate-card-elements $:
      hui-state-label-element $: |
        div {
          padding: 0px !important;
          color: blue;
        }

Overriding default menu behavior

Expand: Overriding default menu behavior

This example moves the fullscreen button into its own group aligned to the left, enables the image button and orders it furthest to the right.

[...]
menu:
  alignment: right
  buttons:
    image:
      enabled: true
      priority: 100
    fullscreen:
      alignment: opposing

Using a dependent camera

dependencies.cameras allows events for other cameras to be shown along with the currently selected camera. For example, this can be used to show events with the birdseye camera (since it will not have events of its own).

Expand: Using dependent cameras with birdseye

This example shows events for two other cameras when birdseye is selected.

[...]
cameras:
  - camera_entity: camera.kitchen
  - camera_entity: camera.sitting_room
  - camera_name: birdseye
    dependencies:
      cameras:
        - camera.kitchen
        - camera.sitting_room

Expand: Using all dependent cameras with birdseye

This example shows events for all other cameras when birdseye is selected. This is just a shortcut for naming all other cameras.

[...]
cameras:
  - camera_entity: camera.kitchen
  - camera_entity: camera.sitting_room
  - frigate:
      camera_name: birdseye
    dependencies:
      all_cameras: true

Using Scan Mode

Have your card follow the action with Scan Mode.

Expand: Using scan mode

type: custom:frigate-card
cameras:
  - camera_entity: camera.back_yard
    # This camera will automatically trigger by occupancy.
  - camera_entity: camera.front_door
    triggers:
      occupancy: false
      motion: true
      entities:
        - binary_sensor.door_opened
view:
  scan:
    enabled: true
    trigger_show_border: true

Changing the Media Layout

Change how the media fits and is positioned within the card dimensions.

Expand: Stretching an image

Stretch the stock Frigate card image into a 4:4 square.

type: custom:frigate-card
cameras:
  - camera_entity: camera.landing
view:
  default: image
dimensions:
  aspect_ratio_mode: static
  aspect_ratio: '4:4'
image:
  layout:
    fit: fill

Expand: Convert a landscape camera to a portrait live view

Take the left-hand side (position with x == 0 and use that as the basis of a 9:16 (i.e. portrait) live view.

type: custom:frigate-card
cameras:
  - camera_entity: camera.landing
dimensions:
  aspect_ratio_mode: static
  aspect_ratio: '9:16'
live:
  layout:
    fit: cover
    position:
      x: 0

Expand: Complex example to vary the media layouts for different cameras

Configure three cameras (all natively landscape): the first uses automatic expansion of dimensions (the default), the second uses a portrait (9:16) card focused on the left side (x == 0) of the media, the third uses a portrait (9:16) card focused on the right side (x == 100) of the media.

type: custom:frigate-card
cameras:
  - camera_entity: camera.landing
  - camera_entity: camera.living_room
  - camera_entity: camera.sitting_room
overrides:
  - conditions:
      camera:
        - camera.living_room
        - camera.sitting_room
    overrides:
      dimensions:
        aspect_ratio_mode: static
        aspect_ratio: '9:16'
      live:
        layout:
          fit: cover
  - conditions:
      camera:
        - camera.living_room
    overrides:
      live:
        layout:
          position:
            x: 0
  - conditions:
      camera:
        - camera.sitting_room
    overrides:
      live:
        layout:
          position:
            x: 100

Card Refreshes

Four sets of flags govern when the card will automatically refresh in the absence of user interaction.

The following table describes the behavior these flags have.

Card Update Truth Table

Note that no (other) automated updates are permitted when scan mode is being triggered.

In the below "Trigger Entities" refers to the combination of view.update_entities and the triggers.entities for the currently selected camera (which in turn will also include the occupancy and motion sensor entities for Frigate cameras if triggers.occupancy and triggers.motion options are enabled, see Trigger Configuration).

view . update_seconds	view . timeout_seconds	view . update_force	Trigger Entities	Behavior
0	0	(Any value)	Unset	Card will not automatically refresh.
0	0	(Any value)	(Any entity)	Card will reload default view & camera when entity state changes.
0	X seconds	(Any value)	Unset	Card will reload default view & camera X seconds after user interaction stops.
0	X seconds	false	(Any entity)	Card will reload default view & camera X seconds after user interaction stops, or when entity state changes (as long as user interaction has not occurred in the last X seconds).
0	X seconds	true	(Any entity)	Card will reload default view & camera X seconds after user interaction stops or when entity state changes.
Y seconds	0	(Any value)	Unset	Card will reload default view & camera every Y seconds.
Y seconds	0	(Any value)	(Any entity)	Card will reload default view & camera every Y seconds, or whenever entity state changes.
Y seconds	X seconds	false	Unset	Card will reload default view & camera X seconds after user interaction stops, and every Y seconds (as long as there hasn't been user interaction in the last X seconds).
Y seconds	X seconds	false	(Any entity)	Card will reload default view & camera X seconds after user interaction stops, and every Y seconds or whenever entity state changes (in both cases -- as long as there hasn't been user interaction in the last X seconds).
Y seconds	X seconds	true	Unset	Card will reload default view & camera X seconds after user interaction stops, and every Y seconds.
Y seconds	X seconds	true	(Any entity)	Card will reload default view & camera X seconds after user interaction stops, and every Y seconds or whenever entity state changes.

Usecases For Automated Refreshes

• Refreshing the live thumbnails every 30 seconds.

view:
  default: live
  update_seconds: 30

• Using clip or snapshot as the default view (for the most recent clip or snapshot respectively) and having the card automatically refresh (to fetch a newer clip/snapshot) on motion.

cameras:
  - entity: camera.office
    triggers:
      motion: true

• Cycle the live view of the camera every 60 seconds

view:
  update_cycle_camera: true
  update_seconds: 60

• Return to the most recent clip of the default camera 30 seconds after user interaction with the card stops.

view:
  default: clip
  timeout_seconds: 30

Casting the Card

This card can be (Chrome) casted to a device (such as a Nest Hub) through the use of Home Assistant Cast.

Instructions to Cast

• Visit Home Assistant Cast and click Start Casting
• Enter your Home Assistant URL, and authorize your account.
• Click Start Casting and choose the device to cast to from the browser menu.
• Choose which view/dashboard to display.
• If successful, the view will be cast to the device.

Limitations

Casting Home Assistant dashboards comes with a number of caveats:

• Home Assistant Casting does not support the HA streaming component (source). This means clips playing and the ha live provider can not work. Other live providers such as jsmpeg and webrtc-card function correctly.
• The Javascript fullscreen API does not work (so the fullscreen button does not work, but see below for an equivalent).

Recommended configuration for a Nest Hub

Using a panel dashboard with the following base configuration will result in the card consuming the entire device screen:

type: custom:frigate-card
cameras:
  - camera_entity: camera.front_door
    live_provider: frigate-jsmpeg
dimensions:
  aspect_ratio: 1024:600
  aspect_ratio_mode: static

See screenshot above.

Troubleshooting

v4 doesn't show recordings / clips

You must be using a version of the Frigate integration >= 3.0.0-rc.2 to see recordings. Using an older version of the integration may also show blank thumbnails in the events viewer. Please upgrade your integration accordingly.

Chrome autoplays when a tab becomes visible again

Even if live.auto_play or media_viewer.auto_play is set to never, Chrome itself will still auto play a video that was previously playing prior to the tab being hidden, once that tab is visible again. This behavior cannot be influenced by the card. Other browsers (e.g. Firefox, Safari) do not exhibit this behavior.

The live view just shows a blank white image during loading

For some slowly loading cameras, for which Home Assistant stream preloading is not enabled, Home Assistant may return a blank white image when asked for a still. These stills are used during initial Frigate card load of the live view if the live.show_image_during_load option is enabled. Disabling this option should show the default media loading controls (e.g. a spinner or empty video player) instead of the blank white image.

JSMPEG Live Camera Only Shows A 'spinner'

You must be using a version of the Frigate integration >= 2.1.0 to use JSMPEG proxying. The frigate-jsmpeg live provider will not work with earlier integration versions.

Timeline shows error message

If the timeline shows a message such as Failed to receive response from Home Assistant for request. make sure you are running a version of the Frigate integration >= 3.0.0-rc.1.

Fullscreen Button Does Not Appear On iPhone

Unfortunately, iOS does not support the Javascript fullscreen API. As a result, card-level fullscreen support for the iPhone is not currently possible.

Android Will Not Render >4 JSMPEG Live Views

Android Webview (as used by Android Chrome / Android Home Assistant Companion) appears to severely limit the number of simultaneous OpenGL contexts that can be opened. The JSMPEG player (that this card uses), consumes 1 OpenGL context per rendering.

This limitation may be worked around (at a performance penalty) by disabling OpenGL for JSMPEG live views:

live:
  jsmpeg:
    options:
      disableGl: true

This bug has some more discussion on this topic. New ideas to address this underlying limitation most welcome!

Carousels with video players cannot be dragged in Firefox

The Firefox video player swallows mouse interactions, so dragging is not possible in carousels that use the Firefox video player (e.g. clips carousel, or live views that use the frigate or webrtc-card provider). The next and previous buttons may be used to navigate in these instances.

Dragging works as expected for snapshots, or for the frigate-jsmpeg provider.

Progress bar cannot be dragged in Safari

Dragging the Safari video controls "progress bar" conflicts with carousel "dragging", meaning the video controls progress bar cannot be moved left or right. Turning off carousel dragging (and using next/previous controls) will return full video controls in Safari:

live:
  draggable: false
media_viewer:
  draggable: false

webrtc_card unloads in the background

AlexxIT's WebRTC Card which is embedded by the webrtc_card live provider internally disconnects the stream when the browser tab is changed (regardless of any Frigate card configuration settings, e.g. lazy_unload). To allow the stream to continue running in the background, pass the background argument to the webrtc_card live provider as shown below. This effectively allows the Frigate card to decide whether or not to unload the stream.

live:
  webrtc_card:
    background: true

double_tap does not work for card-wide actions on Android

The Android video player swallows double_tap interactions in order to rewind or fast-forward. Workarounds:

• Use hold instead of double_tap for your card-wide action.
• Use a Frigate Card Element or menu icon to trigger the action instead.

Home Assistant iOS App not updating after card version change

Try resetting the app frontend cache:

• Configuration -> Companion App -> Debugging -> Reset frontend cache

Casting to a remote media player does not work

This could be for any number of reasons. Chromecast devices can be quite picky on network, DNS and certificate issues, as well as audio and video codecs. Check your Home Assistant log as there may be more information in there.

NOTE: In particular, for Frigate to support casting of clips, the default ffmpeg settings for Frigate must be modified, i.e. Frigate does not encode clips in a Chromecast compatible format out of the box (specifically: audio must be enabled in the AAC codec, whether your camera supports audio or not). See the Frigate Home Assistant documentation or this issue for more.

Javascript console shows [Violation] Added non-passive event listener to a scroll-blocking [...] event

This card heavily uses Embla Carousel -- a light-weight performant carousel library -- to show media. This carousel library uses non-passive event-listeners in a considered and performant way, but one that still causes occasional and unhelpful Chrome warnings. These warnings can be safely ignored in this instance, and cannot easily be fixed in the underlying library as it heavily relies on non-passive event listeners (see this bug comment for explanation).

Development

Building

$ git clone https://github.com/dermotduffy/frigate-hass-card
$ cd frigate-hass-card
$ yarn install
$ yarn run build

Resultant build will be at dist/frigate-hass-card.js. This could be installed via the manual installation instructions above.

Dev Container

You can use the VS Code Remote - Containers extension to speed up the development environment creation. Simply:

1. Clone the repository to your machine
2. Open VS Code on it
3. Reopen the folder in the Dev Container
4. Once done, press F5 to start debugging

Everything should just work without any additional configuration. Under the hood, the dev container setup takes care of bringing up:

• Home Assistant (port 48123:8123)
• Frigate (ports 45000:5000, 41935:1935)
• MQTT (port 41883:1883)

As docker-compose containers.

• The Frigate Home Assistant Integration is registered as a git submodule at .devcontainer/frigate-hass-integration, and VS Code will initialize/clone it for you before opening the dev container.

Some environment variables are supported in a .env file:

• FRIGATE_VERSION: The version of Frigate to use. Defaults to the latest stable version.
• HA_VERSION: The version of Home Assistant to use. Defaults to the latest stable version.

NOTE: When not specifying any version, it's recommended that you docker-compose pull the stack from time to time to ensure you have the latest versions of the images.

The Home Assistant container will get preconfigured during first initialization, therefore, if you changed the Home Assistant configuration, you will need to remove the HA container and start another.

Releasing

1. Merge a PR that contains only a package.json and const.ts version number bump (see this example).
2. Go to the releases page.
3. A release draft will automatically have been created, click 'Edit'.
4. Use the same version number for the release title and tag.
5. Choose 'This is a pre-release' for a beta version.
6. Hit 'Publish release'.