How to Use This Script

1. Introduction: This section introduces the user to the BeagleBone platform and the purpose of the script.
2. Setup and LED Blinking: This part of the script demonstrates how to set up GPIO pins and blink an LED. It includes code that continuously blinks an LED until interrupted.
3. Interactive Shell: Users can practice their skills by running Python commands directly in an interactive shell. This is useful for experimenting with GPIO commands.
4. Quiz: A quiz section to test the user's knowledge about GPIO setup and usage in BeagleBone.

Running the Script

• Make sure you have the Adafruit_BBIO library installed on your BeagleBone.
• Connect an LED to the specified GPIO pin (P9_14 in this case).
• Run the script on your BeagleBone.
• Follow the instructions provided by the script to learn and interact with the GPIO.

Additional Resources

For more detailed guides and community support, refer to:

• BeagleBoard Project Documentation
• BeagleBoard.org Community Forums

Feel free to modify and expand this script based on your learning needs and project requirements.

Setup

• git clone https://github.com/Enthernetcode/beagleForBeginners
• cd beagleForBeginners
• apt update && apt upgrade
• python guide.py To know a bit about the beagle
• python start.py To get started with the program

Thanks For Using