Configuration tool for AMD Overdrive6 devices.
##Status## Hastily developed, but mostly feature-complete.
##Install## Option 1: You can issue the traditional make && sudo make install
Option 2: You can build a .deb with debuild -i -us -uc -b, then dpkg -i the archive.
##Usage##
Usage: od6config [OPTIONS] [SUBOPTIONS] ...
--list
Lists all detected and supported display adapters.
--adapter=ADAPTERLIST
Selects which adapters returned by --list should be affected.
ADAPTERLIST contains a comma-separated list of adapter index
numbers. If ADAPTERLIST is omitted, all adapters will be affected.
--autofix
Sets minclock equal to maxclock, and PowerTune, fan speed, and
target temperature all to their maximum default values.
--get=SUBOPTS
Display various information as read from the device. SUBOPTS contains a
comma-separated list of which information to display.
Valid SUBOPTS values:
clocks Current core and memory clock values
fan Current fan speed
temp Current temperature in Celsius
--set=SUBOPTS
Write the specified configuration values to the device. SUBOPTS contains a
comma-separated list of config key-value pairs.
Valid SUBOPTS values:
core=<value> Set the core clock frequency
mem=<value> Set the memor clock frequency
fan=<value> Set the fan speed percentage
power=<value> Set the target PowerTune value
temp=<value> Set the target temperature
##Examples##
List all Overdrive6 devices:
od6config --list
Show temperature and fan speed of all devices:
od6config --get temp,fan
Show clock rates for devices 2 & 3 only:
od6config --adapter 2,3 --get clocks
Automatically set all devices in an optimal configuration:
od6config --autofix
Manually set the core and memory clocks on all devices to 1050 Mhz core, 1375 Mhz memory:
od6config --set core=1050,mem=1375
Set the core clock to 1100 Mhz, the memory clock to 1250 Mhz, the fan speed to 90%, PowerTune to +45%, and target temperature to 90C on the first device only:
od6config --adapter 0 --set core=1100,mem=1250,fan=90,power=+45,temp=90
... So on and so forth.