Skip to content

Access Point Managed Roaming WIFI - Bridge FDB Daemon - A daemon to use when directly bridging your wifi interface to your network, without using NAT or masquerade. It makes smooth roaming possible.

Notifications You must be signed in to change notification settings

ericwoud/bridgefdbd

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

13 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Managed Roaming WIFI - Bridge FDB Daemon

A daemon to use when directly bridging your wifi interface to your network, without NAT or masquerade. The daemon makes it possible to do smooth roaming.

Major update 15-12-2020:

  • No more libraries to communicate with netlink
  • Listening IP does not have to be linked to the bridge

Major update 24-11-2020:

  • Using libmnl instead of libnetlink
  • Using epoll and inotify instead of threads

Ever tried to make an Acces Point (AP) by directly adding your wifi interface to the bridge on your AP? Why doesn't his work as expected? Why do you need to IPforward or use a NAT or somethin similar? When you add the wifi interface to the AP bridge the following happens:

Your wifi client was first connected to your wireless router. Let's say you use your phone to test it. Look at the Forwarding DataBase (FDB) on both your router and AP by typing 'bridge fdb show' on a command prompt when possible. Locate your phones MAC address and see how network packets get send through the bridges on your network.

Now connect your phone to the wifi on your AP (make it forget about the router wifi so it does never try to connect to it again). The wifi connection to the AP is made but there everything stops. No IP is retreived through dhcp. Why not? Look at the FDB on both bridges again and notice that nothing has changed. All network packet are still being send to the router as if your phone is still connected to your router. This is why network traffic is not working at the moment. Of course you would be googling for and trying for some answers and after a X amount of minutes, you found it, it works again somehow, but you cannot figure out why. Look at your bridges FDB again and see the situation has changed. All packets are now send to the AP and everything works, including DHCP and other services that only work on local network like DLNA and mDNS, etc. But now if you connect to the router again this connection does not work anymore.

What happened is after a certain amount of minutes the FDB entries are cleaned up if they have not been used and everything works again until you switch from AP to router or from router to AP.

If you want to change from router to AP more smoothly you will need to apply some fix. I have 2 solutions for this problem.

  1. FDB Deamon It deletes the MAC address from the FDB on all bridges whenever a wifi client connects/disconnects to hostapd for a wifi connection. You need to be able to install the bridgefdbd program on your AP AND also on your wireless router. Your wifi client gets the same MAC and IP number on router and AP. There can also be no ethernet switch between the router an AP's, because the switch's FDB does not get cleaned up.

  2. Mc Spoof It applies a technique called MAC spoofing. Your wifi client gets a different MAC and IP number on the wireless router then on the AP. It adds a fixed number to the mac address of the wifi client. You only need to install it on all AP's and wireless router, except one, usually your wireless router. If you cannot install custom software on your wireless router, this is the way to go. It is however more of a hack and is likely to break more easily. However, it is possible to have an ethernet switch between the router and AP's.

Getting Started with Bridge FDB Daemon

You need to build the program from source.

Prerequisites

You need to be able to install the bridgefdbd program on your AP AND also on your wireless router. Connect the router and AP directly without using a network switch. Hostapd needs to be in control of your wifi interfaces on your router and AP. On the AP the wifi interface needs to be added to the lan bridge.

In the hostapd configuration there has to be the following statement, also after every bss= line:

ctrl_interface=/var/run/hostapd

Installing

Install necessary library. Libsystemd is only used for sending 2 messages to systemd, so the service can be of Type=notify. Remove '#define USE_SYSTEMD 1' from source if you do not want to use it.

sudo apt install libsystemd-dev

Clone from Git

git clone https://github.com/ericwoud/bridgefdbd.git

Change directory

cd bridgefdbd

Now build the executable.

make

On Debian/Ubuntu you can use the following to copy the files to the needed locations and start and enable the systemd service. You may need to use sudo if not logged on as root.

sudo make install

Edit the /etc/default/bridgefdbd file. At least make sure that the IP addresses of the bridges on your router and on your AP are in the BRIDGEFDBD_ADDRS line. Restart the service if necessary.

Other make options:

Remove the installation:

sudo make remove

Install the script:

sudo make installscript

Remove the script:

sudo make removescript

Clean:

make clean

Features

The command line options are:

  • -d number : debug information 0 = none, 1 = some (default), 2 = all.
  • -p number : port number to use for internal network communication (UDP).
  • -s script : location of optional bash script that listens if some client connected on any bridge on your network (default = ./bridgefdbd.sh). If not used at all it can be removed.
  • -h path ; hostapd ctrl_interface to use (default = /var/run/hostapd).

After the options all the IP addresses of all your network bridges that run bridgefdbd are listed.

On the commandline you can use CTRL-Z to make a clean exit, CTRL-C for a quick and dirty exit.

Acknowledgments

About

Access Point Managed Roaming WIFI - Bridge FDB Daemon - A daemon to use when directly bridging your wifi interface to your network, without using NAT or masquerade. It makes smooth roaming possible.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published