Tested same record config as NOAA

[SA7BNT]

Hey,
i should recommend to use the same recording config (noaa.sh) for ISS record.
Tested in the morning and was a working great.
20181029-0542_ISS-SSTV.mp3.zip

[filipsPL]

Congratulations on the nice SSTV image! 👍

I don't fully understand what config do you mean? Could you please send the config you used for that?
Which software did you use for the mp3 to image conversion?

[SA7BNT]

I was just running the noaa.sh instead of the iss_voice.sh in the autowx2_config.py
See pic below
I did not convert to MP3. Took the wav from the noaa rec. map and run it in Multiscan 3B SSTV
https://www.qsl.net/kd6cji/
Was working absolutely great for me.

Unfortunately I live too far in the north and did not have a good elevation angle.
Here is one more ok pic. with ca 20 degree elevation.

[filipsPL]

Ok, so then it depends on what you are trying to achieve. For recording of voice transmission, I would stay with mp3. For further decoding, like SSTV, wav is better. I will try to modify iss.sh to give these two options.

[filipsPL]

Fixed in 9abe2d9. Now there is an option in iss_voice.sh to select mp3 or wav destination. Please test! 🔧

[filipsPL]

I have decided to do it another way: there are two separate modules:

• for recording wav file
• for recording mp3

and it is configured on the level of autowx2_conf.py.

changed in d22d4bc