Skip to content

gmke/Tarocco

 
 

Repository files navigation

Tarocco

Open Source Closed Loop Motor Controller


Tarocco (c) by Gino Magarotto

Tarocco is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.

You should have received a copy of the license along with this work. If not, see http://creativecommons.org/licenses/by-sa/3.0/.


Low cost servo drive for small CNC machinery

Get yours on https://www.crowdsupply.com/citrus-cnc/tarocco

Changelog

2017-08-12

  • TX_SEND timer period changed to 1874. This makes the reporting frequency exactly 100 Hz (not taking clock tolerance into account)
  • Added a serial command to clear any fault flag. Useful when calibrating the controller parameters
  • Holding the reset pin low before powering the board puts the microcontroller into bootloader mode. You won't have to worry about the three second timeout window anymore *V1.1 board and schematic files with fiducials and test points for pogo pins instead of a programming connectos are available.

2017-05-24

  • Fixed motor stutter every third of a second
  • Fixed serial communications bug that froze the status reporting
  • Made status reporting frequency exactly 100 Hz, to help with plotting and tunning
  • Increased maximum following error value to 32000
  • User can now switch between current or PWM output for status reporting

Thanks to Patrick Dussud for all the help

drive

About

Closed Loop Motor Controller

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C 48.6%
  • C++ 27.1%
  • Pawn 10.0%
  • GAP 8.1%
  • HTML 3.8%
  • Assembly 1.2%
  • Other 1.2%