GSOC-2018-tests

This repository contains the test experiments done during GSoC 2018. Please note that this writeup assumes that you already have dpdk installed on your computer. Also you must be using a linux based OS on your computer(This code has been tested on Ubuntu 16.04LTS).

Clone the github repository

git clone https://github.com/gogapp/GSOC-2018-tests.git
cd ~/GSOC-2018-tests/

Install the following dependencies:

sudo apt-get update
sudo apt-get install libpcap-dev

The test experiment uses packet traces requested from Caida for testing of the implemeted algorithms. To process the packet traces libpcap has been used.
To make the code run, you must bind the network adapters to DPDK. In order to check which network adaptes are avaiable run:

cd ${RTE_SDK}
sudo ./usertools/dpdk-devbind.py --status

Suppose that you have 1 network adapter available to bind to dpdk with iface=enp0s8. Run the following code to bind the network adapter to dpdk:

cd ${RTE_SDK}
sudo ifconfig enp0s8 down
sudo ./usertools/dpdk-devbind.py --bind=uio_pci_generic enp0s8

Testing Space Saving Algorithm

Run the following code to build the test and to run it.

cd ~/GSOC-2018-tests/space_saving/
make
sudo ./build/blackholing -c 0x3 -n 2

Testing RHHH Algorithm

Run the following code to build the test and to run it.

cd ~/GSOC-2018-tests/RHHH/
make
sudo ./build/blackholing -c 0x3 -n 2