pycyborg

Python library for the mad catz cyborg ambx gaming lights (http://www.ambx.com/product/cyborg-gaming-lights)

Status

• protocol reverse engineering: done
• simple demo without library: done
• library: done
• boblight interface: done
• installer: done
• tested platforms: Linux(Arch,Ubuntu,OpenElec,Raspbian) , Mac OS X, Win10

Requires :

• libusb 1.0 ( http://www.libusb.org/ ) or libusb-win32 (http://zadig.akeo.ie/)
• pyusb ( https://github.com/walac/pyusb/ )

scripts

• identify.py : activate all cyborg gaming lights and print out some information
• setcolor.py : control the gaming lights from the shell (from bash scripts etc)
• boblight.py : boblight interface
• lightpack-prismatik.py : lightpack client
• a few demo scripts are available in the demo folder

getting started

• install libusb-1.0 (or libusb-win32 via zadig)
• install pyusb 1.0 ( use your distro's package or directly from github: https://github.com/walac/pyusb/ )
• get the source

either as package:

wget http://github.com/gryphius/pycyborg/tarball/master -O pycyborg.tar.gz
tar -xvzf pycyborg.tar.gz
cd gryphius-pycyborg*

or clone git repo

git clone git://github.com/gryphius/pycyborg.git
cd pycyborg

• install

install the package and reload udev rules

python setup.py install
sudo udevadm trigger

• test

this should flash your gaming lights and print out some info. if you skipped step 2 you must run this as root, eg. sudo python identify.py or you will get USBError: [Errno 13] Access denied (insufficient permissions)

python identify.py

console output should be similar to this:

found and initialized 2 cyborg ambx gaming lights
	
Cyborg 1: 
<Cyborg position=NW v_pos=low intensity=50%>

Cyborg 2: 
<Cyborg position=S v_pos=low intensity=50%>

boblight

To control the cyborg lights from boblight (http://code.google.com/p/boblight/), use a config file like below (change the path in 'output' to where you checked out pycyborg)

[global]
interface 127.0.0.1
port 19333

[device]
name cyborg_ambx
output /home/gryphius/gitspace/pycyborg/boblight.py
channels 6
type popen
interval 500000

[color]
name red
rgb FF0000

[color]
name green
rgb 00FF00

[color]
name blue
rgb 0000FF

[light]
name cyborg-left
color red cyborg_ambx 1
color green cyborg_ambx 2
color blue cyborg_ambx 3
hscan 0 49.9
vscan 0 100

[light]
name cyborg-right
color red cyborg_ambx 4
color green cyborg_ambx 5
color blue cyborg_ambx 6
hscan 50 100
vscan 0 100

there is also a simple wizard that can automatically generate a config file. this is especially useful if you have more than two lights:

python boblight.py --makeconfig