gateway-mfr-rs

The gateway_mfr application provisions an security part (like the ECC508/ECC608) for use as part of a Helium hotspot, and provides utilities for testing and benchmarking the addressed part.

In the ECC case, it does provisioning by configuring and locking the ECC configuration fields and then generating the miner key in the slot identified in the device URL (default slot 0).

Other security parts may be provisioned in different ways or may have been locked down before hotspot integration.

The public part of the miner key needs to be captured from the output of this application and supplied as part of the data required to get into the Helium Onboarding Server if gateway add and assert location transactions are to be paid for on behalf of the user.

This applications should be used as part of a manufacturing image that does NOT include the Helium miner software and is solely used for testing and provisioning the built hotspot before setting up the production miner image.

Addressing

The security device to provision or test is addressed using a --device option. In the ECC case, for exmaple this URL could be ecc://i2c-1:96?slot=0 to address the /dev/i2c-1 linux device, using the bus address96 and slot 0 on the ECC device. This is also the default URL for the application, and must be provided for ECC parts with a different bus address or slot.

If you are passing an additional command such as those decribed in the usage section below those commands need to come after the device address. For example:

gateway_mfr --device ecc://i2c-1:96?slot=0 key

Each security part will have it's own URL scheme and host/path arguments to address the specific system and entry used for key material and provisioning.

Usage

1. Using the application can be done in two ways;

   • Download a pre-built binary from the releases page. Note that the unknown target systems are all ecc608 based targets. To find the right target binary for a given platform, look at the supported targets for the maker name and associated target.

   • Build the application. This will involve installing rust on the host system and cross compiling for running the application on the target hardware. Install cross make cross compiling to targets easier. Also install cargo-make to set up for packaging and specific profile support.

     For example to compile for Raspbery-Pi's aarch64 architecture:

     cargo make --profile aarch64-unknown-linux-musl --release

     The resulting cross compiled binary will be located in ./target/ aarch64-unknown-linux-musl/release/gateway_mfr

     NOTE: For some profiles the resulting target will not be in the profile name but under the target system triplet that was used to build the target. For example, the x86_64-tpm-debian-gnu uses the x86_64-unkown-linux-gnu target but a custom Docker file to build using Debian since that is where tpm is supported.

2. As part of the provisioning/QA steps start and provision the security part:

   gateway_mfr provision

   This will configure the security part, generate the miner key and output it to stdout. Capture this output and collect it and other required information for use by the Onboarding Server.

   If you need the extract the onboarding/miner key at a later stage you can run:

   gateway_mfr key

   NOTE: Do not include this application in the final image as it is not used as part of normal hotspot operations.

3. To verify that the security part is configured correctly you can run a final test cycle as part of the QA steps:

   gateway_mfr test

   This will output a json table with all executed tests for the security part and their results. This includes a top level result key with pass or fail as the value.

   Tests are specific for each security part and are intended to test that the security part is locked, and that signing and ecdh opterations function

4. To benchmark a security part as part of integration:

   gateway_mfr bench

   This will run a number of signing iterations (default 100) and report the average signing time and the number of signing operations per second.

   Helium Hotspots using a full miner will need 6-7 or better signing operations per second while light/dataonly hotspots should be able to operate with around 3-5 operations per second (this number needs to be confirmed).

The security part is now configured for production use. The production image, including the Helium miner can be installed and started. If configured correctly the miner software will use the configured key in slot 0 as the miner key and use the security part for secured transaction signing.

The full suite of options can be found by running the help command:

gateway_mfr help

This will give you an output like the following where you can find all of the options listed:

gateway_mfr 0.3.2
Gateway Manufacturing 

USAGE:
    gateway_mfr [OPTIONS] <SUBCOMMAND>

FLAGS:
    -h, --help       Prints help information
    -V, --version    Prints version information

OPTIONS:
        --device <device>    The security device to use [default: ecc://i2c-1]

SUBCOMMANDS:
    bench        Run a benchmark test
    config       Gets the zone, slot or key config for a given ecc slot
    help         Prints this message or the help of the given subcommand(s)
    info         Get ecc chip information
    key          Prints public key information for a given slot
    provision    Configures the ECC for gateway/miner use. This includes configuring slot and key configs for †he
                 given slot, locking the data and config zone and generating an ecc compact key in the configured
                 slot
    test         Read the slot configuration for a given slot