Skip to content

hma23/puppet-jenkins

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

puppet-jenkins

Build Status

This is intended to be a re-usable Puppet module that you can include in your own tree.

Experimental Types and Providers

The experimental types/providers are not for the faint of heart. If you are starting out with this module you probably want to skip directly to Getting Started.

A family of experimental native types and providers has been added to this module, in parallel to the existing classes and defined types, with the goal of soliciting feedback. One of the primary benefits of these new types is not requiring manifest changes to manage jenkins with or without "security" enabled. The goal is to eventually replace the functionality of the existing classes/defines with the new types. Usage feedback (positive and negative), bug reports and/or PRs would be greatly welcomed.

The semantics and API of these types should be considered unstable and almost certainly will change based on feedback. It is currently unclear if these types will be considered part of the public API or treated as private to the module.

See NATIVE_TYPES_AND_PROVIDERS.md

Jenkins 2.54 and 2.46.2 remoting free CLI and username / password CLI auth

Remoting Free CLI

Jenkins refactored the CLI in 2.54 and 2.46.2 in response to several security incidents (See JENKINS-41745. This module has been adjusted to support the new CLI. However you need to tell the module if the new remoting free cli is in place. Please set $::jenkins::cli_remoting_free to true for latest Jenkins servers.

Note: This is not the default to support backward compatibility. This may become a default once this module is released in a new version.

Also note that the module tries to do heuristics for this setting if not specified. You can always set this parameter to enforce usage of old or new CLI interface.

Heuristics:

  • LTS:
    • If manage_repo and repo == lts and version = latest -> true
    • If manage_repo and repo == lts and version >= 2.46.2 -> true
    • else false
  • Non-LTS:
    • If manage_repo and repo != lts and version = latest -> true
    • If manage_repo and repo != lts and version >= 2.54 -> true
    • else false

Username and Password Auth

The new CLI also supports proper authentication with username and password. This has not been supported in this module for a long time, but is a requirement for supporting AD and OpenID authentications (there is no ssh key there). You can now also supply $::jenkins::cli_username and $::jenkins::cli_password to use username / password based authentication. Then the puppet automation user can also reside in A.D

Note: latest jenkins (2.54++ and 2.46.2++) require a ssh username, so you must also provide $::jenkins::cli_username for ssh. If you specify both username/password and ssh key file, SSH authentication is preferred.

Using puppet-jenkins

Getting Started

puppet module install rtyler/jenkins
    node 'hostname.example.com' {
        include jenkins
    }

Then the service should be running at http://hostname.example.com:8080/.

Jenkins' options

Master Executor Threads

class { 'jenkins':
  executors => 0,
}

Managing Jenkins jobs

Build jobs can be managed using the jenkins::job define

Creating or updating a build job

  jenkins::job { 'test-build-job':
    config => template("${templates}/test-build-job.xml.erb"),
  }

Disabling a build job

  jenkins::job { 'test-build-job':
    enabled => 0,
    config  => template("${templates}/test-build-job.xml.erb"),
  }

Removing an existing build job

  jenkins::job { 'test-build-job':
    ensure => 'absent',
  }

Installing Jenkins plugins

The Jenkins puppet module defines the jenkins::plugin resource which will download and install the plugin "by hand"

The names of the plugins can be found on the update site

Latest

By default, the resource will install the latest plugin, i.e.:

  jenkins::plugin { 'git': }

If you specify version => 'latest' in current releases of the module, the plugin will be downloaded and installed with every run of Puppet. This is a known issue and will be addressed in future releases.

By version

If you need to peg a specific version, simply specify that as a string, i.e.:

  jenkins::plugin { 'git':
    version => '1.1.11',
  }

Note that plugin will timeout if it takes longer than 120 seconds to download. You can increase this by specifying a timeout value, i.e: timeout => 240.

Verifying

This module will download the jenkins modules over HTTP, without SSL. In order to add some verification regarding the downloaded file, you can specify a checksum. You can also define a checksum type with 'digest_type' (default to sha1 if unspecified) ie.:

  jenkins::plugin { 'git':
    version       => '2.2.12',
    digest_string => '48141822e0eea1faa1a1a99b35372494e7352c2746ca3aa3a19a07f34b021848d2cd0bffc8959c1b809c5be231c1b49e9ffec0430dd68938197ac0f34588ee25',
    digest_type   => 'sha512',
  }

Direct URL

Direct URL from which to download plugin without modification. This is particularly useful for development and testing of plugins which may not be hosted in the typical Jenkins' plugin directory structure.

  jenkins::plugin { 'myplugin':
    source => 'https://example.org/myplugin.hpi',
  }

Note that that when source is specified, the version and plugin_url parameters will have no effect on the plugin retrieval URL.

Plugin dependencies

Dependencies are not automatically installed. You need to manually determine the plugin dependencies and include those as well. The Jenkins wiki is a good place to do this. For example: The Git plugin page is at https://wiki.jenkins-ci.org/display/JENKINS/Git+Plugin.

Slaves

You can automatically add slaves to jenkins, and have them auto register themselves. Most options are actually optional, as nodes will auto-discover the master, and connect.

Full documentation for the slave code is in jenkins::slave.

It requires the swarm plugin on the master & the class jenkins::slave on the slaves, as below:

    node /jenkins-slave.*/ {
      class { 'jenkins::slave':
        masterurl => 'http://jenkins-master1.domain.com:8080',
        ui_user => 'adminuser',
        ui_pass => 'adminpass',
      }
    }

    node /jenkins-master.*/ {
        include jenkins
        include jenkins::master
    }

Depending on Jenkins

If you have any resource in Puppet that depends on Jenkins being present, add the following require statement:

  exec { 'some-exec':
    require => Class['jenkins::package'],
    # ... etc
  }

Advanced features

  1. Plugin Hash - jenkins::plugins
  2. Config Hash - jenkins::config
  3. Configure Firewall - jenkins (init.pp)
  4. Outbound Jenkins Proxy Config - jenkins (init.pp)
  5. CLI Helper
  6. Jenkins Users
  7. Credentials
  8. Simple security model configuration

API-based Resources and Settings (Users, Credentials, security)

This module includes a groovy-based helper script that uses the Jenkins CLI to interact with the Jenkins API. Users, Credentials, and security model configuration are all driven through this script.

When an API-based resource is defined, the Jenkins' CLI is installed and run against the local system (127.0.0.1). Jenkins is assumed to be listening on port 8080, but the module is smart enough to notice if you've configured an alternate port using jenkins::config_hash['HTTP_PORT'].

Users and credentials are Puppet-managed, meaning that changes made to them from outside Puppet will be reset at the next puppet run. In this way, you can ensure that certain accounts are present and have the appropriate login credentials.

CLI Helper

The CLI helper assumes unauthenticated access unless configured otherwise. You can configure jenkins::cli_helper to use an SSH key on the managed system by passing the keyfile path as a class parameter:

  class {'jenkins':
    cli_ssh_keyfile => '/path/to/id_rsa',
  }

... or via hiera:

jenkins::cli_ssh_keyfile: "/path/to/id_rsa"

Direct including of the jenkins::cli_helper class into the manifest is deprecated.

There's an open bug in Jenkins (JENKINS-22346) that causes authentication to fail when a key is used but authentication is disabled. Until the bug is fixed, you may need to bootstrap jenkins out-of-band to ensure that resources and security policy are configured in the correct order. For example:

# In puppet:
  anchor {'jenkins-bootstrap-start': } ->
    Class['jenkins::cli_helper'] ->
      Exec[$bootstrap_script] ->
        anchor {'jenkins-bootstrap-complete': }

# Code for $bootstrap_script
#!/bin/bash -e
# Generate an SSH key for the admin user
ADMIN_USER='<%= admin_user_name %>'
ADMIN_EMAIL='<%= admin_user_email %>'
ADMIN_PASSWORD='<%= admin_user_password %>'
ADMIN_FULLNAME='<%= admin_user_full_name %>'
ADMIN_SSH_KEY='<%= admin_ssh_keyfile %>'
JENKINS_CLI='<%= jenkins_libdir %>/jenkins-cli.jar'
PUPPET_HELPER='<%= jenkins_libdir %>/puppet_helper.groovy'
HELPER="java -jar $JENKINS_CLI -s http://127.0.0.1:8080 groovy $PUPPET_HELPER"
DONEFILE='<%= jenkins_libdir %>/jenkins-bootstrap.done'

ADMIN_PUBKEY="$(cat ${ADMIN_SSH_KEY}.pub)"

# Create the admin user, passing no credentials
$HELPER create_or_update_user "$ADMIN_USER" "$ADMIN_EMAIL" "$ADMIN_PASSWORD" "$ADMIN_FULLNAME" "$ADMIN_PUBKEY"
# Enable security. After this, credentials will be required.
$HELPER set_security full_control

touch $DONEFILE

jenkins::cli::exec

The defined type jenkins::cli::exec may be used to execute arbitrary CLI helper commands.

Arguments to the CLI helper script may be specified as the resource's title.

  jenkins::cli::exec { 'set_num_executors 0': }

Or passed as an array to the command parameter. This example is semantically equivalent to the first.

  jenkins::cli::exec { 'set_num_executors 0':
    command => ['set_num_executors', '0'],
  }

which is also equivalent to:

  jenkins::cli::exec { 'set_num_executors 0':
    command => 'set_num_executors 0',
  }

If the unless parameter is specified, an environment variable named $HELPER_CMD is declared which contains the complete string needed to execute the CLI helper script (minus arguments). This may be useful in constructing idempotent exec statements.

  $num_executors = 0
  jenkins::cli::exec { "set_num_executors ${num_executors}":
    unless => "[ \$(\$HELPER_CMD get_num_executors) -eq ${num_executors} ]"
  }

Users

Email and password are required.

Create a johndoe user account whose full name is "Managed by Puppet":

  jenkins::user { 'johndoe':
    email    => 'jdoe@example.com',
    password => 'changeme',
  }

Credentials

Password is required. For ssh credentials, password is the key passphrase (or '' if there is none). private_key_or_path is the text of key itself or an absolute path to a key file on the managed system.

Create ssh credentials named 'github-deploy-key', providing an unencrypted private key:

    jenkins::credentials { 'github-deploy-key':
      password            => '',
      private_key_or_path => hiera('::github_deploy_key'),
    }

Setting a UUID:

You can also specify a UUID to use with the credentials, which will be used to identify the credentials from within the job config. This is necessary when setting credentials for use with the git plugin, for example.

You can either manually generate a UUID from a site like https://www.uuidgenerator.net, or use the UUID from an existing user, which is accessible within the URL of the Jenkins console when managing an existing user's credentials.

    jenkins::credentials { 'deploy-user':
      password            => '',
      private_key_or_path => hiera('::deploy_key'),
      uuid                => hiera('::deploy_credentials_uuid'),
    }

Configuring Security

The Jenkins security model can be set to one of two modes:

  • full_control - Users have full control after login. Authentication uses Jenkins' built-in user database.
  • unsecured - Authentication is not required.

Jenkins security is not managed by puppet unless jenkins::security is defined.

Using from Github / source

With librarian

If you use librarian-puppet, add the following to your Puppetfile:

mod "rtyler/jenkins"

With the "puppet module" tool

This module is compatible with the puppet module tool. Appropriately this module has been released to the Puppet Forge, allowing you to easily install the released version of the module

To quickly try this module with the puppet module tool:

% sudo puppet module install rtyler/jenkins
% sudo puppet apply -v -e 'include jenkins'
info: Loading facts in facter_dot_d
info: Loading facts in facter_dot_d
info: Applying configuration version '1323459431'
notice: /Stage[main]/Jenkins::Repo::El/Yumrepo[jenkins]/descr: descr changed '' to 'Jenkins'
notice: /Stage[main]/Jenkins::Repo::El/Yumrepo[jenkins]/baseurl: baseurl changed '' to 'http://pkg.jenkins-ci.org/redhat/'
notice: /Stage[main]/Jenkins::Repo::El/Yumrepo[jenkins]/gpgcheck: gpgcheck changed '' to '1'
notice: /Stage[main]/Jenkins::Repo::El/File[/etc/yum/jenkins-ci.org.key]/ensure: defined content as '{md5}9fa06089848262c5a6383ec27fdd2575'
notice: /Stage[main]/Jenkins::Repo::El/Exec[rpm --import /etc/yum/jenkins-ci.org.key]/returns: executed successfully
notice: /Stage[main]/Jenkins::Package/Package[jenkins]/ensure: created
notice: /Stage[main]/Jenkins::Service/Service[jenkins]/ensure: ensure changed 'stopped' to 'running'
notice: Finished catalog run in 27.46 seconds

Overriding the jenkins package name

It's possible to specify a different package name to the default jenkins if you wish:

class { 'jenkins':
  package_name => 'jenkins_custom',
}

Installing from a hosted RPM

Sometimes you don't have an RPM repository available and are not allowed to directly install from repositories on the Internet. In this case, you can still install Jenkins with this module by hosting the jenkins RPM file somewhere accessible (http server, S3 bucket, etc.) and tell

class { 'jenkins':
  direct_download => 'http://myserver/rpms/jenkins-x.xxx-1-1.rpm',
}

Packages

No packages published

Languages

  • Ruby 69.4%
  • Puppet 17.4%
  • Groovy 8.7%
  • Shell 3.3%
  • HTML 0.9%
  • Dockerfile 0.3%