node-red-contrib-maxcube2

A collection of node-red nodes to control the eQ-3 Max! Cube

Introduction

History

node-red-contrib-maxcube2 is a fork of https://github.com/ivesdebruycker/node-red-contrib-maxcube using https://github.com/normen/maxcube2.

Changes from node-red-contrib-maxcube

• Settings to temporary disable maxcube connection (the cube can handle only one TCP connection at a time, since maxcube/maxcube2 use a permanent connection if you want to temporary use another client you have to stop node-red...now you can disable in node settings)
• Node to query devices configurations
• Set mode to all devices with a single payload ({"mode" : "AUTO"} without rf_address)
• Output devices data as single message or separeted messages
• I'm planning add some additional features like schedule settings

The old API didn't change currently so it's a drop-in replacement.

Installation

cd $HOME/.node-red
npm install node-red-contrib-maxcube2

Restart Node-RED.

Nodes

maxcube config node

Set ip and port of your Max! Cube

maxcube (input)

A node to query the eQ-3 Max! Cube for device states.

Whenever an input message is received, device states are updated from the Max! Cube, and sent as separate messages (one for each device) with following structure:

{
    "rf_address": "1709d7",
    "initialized": true,
    "fromCmd": false,
    "error": false,
    "valid": true,
    "mode": "AUTO",
    "dst_active": true,
    "gateway_known": true,
    "panel_locked": false,
    "link_error": false,
    "battery_low": false,
    "valve": 0,
    "setpoint": 17,
    "temp": 0,
    "device_type": 1,
    "device_name": "Termosifone Sala TV",
    "room_name": "Piano terra",
    "room_id": 1
}

or as a single message with the following structure:

{
    "1709d7": {
        "rf_address": "1709d7",
        "initialized": true,
        "fromCmd": false,
        "error": false,
        "valid": true,
        "mode": "AUTO",
        "dst_active": true,
        "gateway_known": true,
        "panel_locked": false,
        "link_error": false,
        "battery_low": false,
        "valve": 0,
        "setpoint": 17,
        "temp": 0,
        "device_type": 1,
        "device_name": "Termosifone Sala TV",
        "room_name": "Piano terra",
        "room_id": 1
    },
    "18eb18": {
        "rf_address": "18eb18",
        "initialized": true,
        "fromCmd": false,
        "error": false,
        "valid": true,
        "mode": "AUTO",
        "dst_active": true,
        "gateway_known": true,
        "panel_locked": false,
        "link_error": false,
        "battery_low": false,
        "valve": 4,
        "setpoint": 17
        "temp": 27.2,
        "device_type": 3,
        "device_name": "Termostato a parete",
        "room_name": "Piano terra",
        "room_id": 1
    }
    "0a1d0e": {
        "rf_address": "0a1d0e",
        "open": false,
        "device_type": 5,
        "device_name": "Pulsante Eco"
    }
}

maxcube configuration (input)

A node to query the eQ-3 Max! Cube for device states.

Whenever an input message is received, device configuration are updated from the Max! Cube, and sent as separate messages (one for each device) with following structure:

{
   "rf_address":"18b444",
   "device_type":1,
   "serial_number":"OEQ1131666",
   "comfort_temp":21.5,
   "eco_temp":16.5,
   "max_setpoint_temp":30,
   "min_setpoint_temp":4.5,
   "temp_offset":0,
   "max_valve":100
}

or as a single message with the following structure:

{
   "18b444":{
      "rf_address":"18b444",
      "device_type":1,
      "serial_number":"OEQ1131666",
      "comfort_temp":21.5,
      "eco_temp":16.5,
      "max_setpoint_temp":30,
      "min_setpoint_temp":4.5,
      "temp_offset":0,
      "max_valve":100
   },
   "1709a1":{
      "rf_address":"1709a1",
      "device_type":1,
      "serial_number":"NKF0004984",
      "comfort_temp":21.5,
      "eco_temp":16.5,
      "max_setpoint_temp":30,
      "min_setpoint_temp":4.5,
      "temp_offset":0,
      "max_valve":100
   }
}

maxcube (output)of a device

A node to set the temperature and/or the mode of a device. Valid modes are "AUTO", "MANUAL", "BOOST" and "VACATION".

Accepts messages with payload of type object with following structure:

MANUAL on specific device

{
  "rf_address": "0abc12",
  "degrees": 20,
  "mode":"MANUAL"
}

MANUAL on all devices

{
  "degrees": 20,
  "mode":"MANUAL"
}

AUTO on all devices

{
  "mode":"AUTO"
}

VACATION on all devices until specific date (ISO 8601)

{
  "mode":"VACATION",
  "untilDate" : "2019-06-20T10:00:00Z"
}