Rename Target to Layout

docs/getting_started/build_dashboard.md

@@ -79,7 +79,7 @@ sources:
     tables:
       penguin_table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Penguins
     source: penguin_source
     views:
@@ -114,7 +114,7 @@ sources:
     tables:
       penguin_table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Penguins
     source: penguin_source
     views:
@@ -146,7 +146,7 @@ sources:
     tables:
       penguin_table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Penguins
     source: penguin_source
     views:
@@ -196,7 +196,7 @@ pipelines:
       - type: columns
         columns: ['species', 'island', 'sex', 'year', 'bill_length_mm', 'bill_depth_mm']
 
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     views:
@@ -245,7 +245,7 @@ pipelines:
       - type: columns
         columns: ['species', 'island', 'sex', 'year', 'bill_length_mm', 'bill_depth_mm']
 
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     views:
@@ -272,7 +272,7 @@ targets:
 
 ## 8. Customize the appearance and behavior
 
-The default layout we get is less than ideal for this case since it cuts off one of our plots, leaves a lot of empty space, and does not resize responsively. We can get responsive plots by adding `sizing_mode` to the target and `responsive` to the views. By changing the `layout` and `height`, we can further customize how the dashboard looks.
+The default layout we get is less than ideal for this case since it cuts off one of our plots, leaves a lot of empty space, and does not resize responsively. We can get responsive plots by adding `sizing_mode` to the layout and `responsive` to the views. By changing the `layout` and `height`, we can further customize how the dashboard looks.
 
 ::::{tab-set}
 
@@ -300,7 +300,7 @@ pipelines:
       - type: columns
         columns: ['species', 'island', 'sex', 'year', 'bill_length_mm', 'bill_depth_mm']
 
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     layout: [[0], [1, 2]]
@@ -366,7 +366,7 @@ pipelines:
       - type: columns
         columns: ['species', 'island', 'sex', 'year', 'bill_length_mm', 'bill_depth_mm']
 
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     layout: [[0], [1, 2]]

docs/getting_started/core_concepts.md

@@ -45,7 +45,7 @@ To specify how you want the data to be manipulated (filtered and transformed)
 ::::{grid} 1
 :gutter: 3
 
-:::{grid-item-card} `targets`
+:::{grid-item-card} `layouts`
 To create the views (e.g. table, plot) for your dashboard
 :::
 
@@ -62,7 +62,7 @@ sources:
 pipelines:
   ...:
     ...: ...
-targets:
+layouts:
   - ...: ...
     ...: ...
 ```
@@ -76,7 +76,7 @@ The config section provides general settings which apply to the whole dashboard.
 ```{code-block} YAML
 config:
   title: The title of the overall application
-  layout: The layout to put the targets in ('grid', 'tabs', 'column')
+  layout: The layout to put the invidual (sub-)layouts in.
   logo: A URL or local path to an image file
   sync_with_url: Whether to sync app state with URL
   template: The template to use for the monitoring application
@@ -182,12 +182,12 @@ pipelines:
 
 See the [Transform Reference](../architecture/transform) for other transform types and for the relevant parameters.
 
-## Targets (views)
+## Layouts (views)
 
-The `targets` section defines how the dashboard is going to look. The essential structure of a `targets` section is as follows:
+The `layouts` section defines how the dashboard is going to look. The essential structure of a `layouts` section is as follows:
 
 ```{code-block} YAML
-targets:
+layouts:
   - title: Dashboard title
     pipeline: The pipeline driving these views
     ...: Dashboard parameters
@@ -196,16 +196,16 @@ targets:
         ...: View parameters
 ```
 
-:::{dropdown} Expand this dropdown for a more complex example structure of `targets`
+:::{dropdown} Expand this dropdown for a more complex example structure of `layouts`
 :animate: fade-in-slide-down
 ```{code-block} yaml
-targets:
+layouts:
   - title: The title of the monitoring endpoint
     download:
       format: When specified adds a section to the sidebar allowing users to download the filtered dataset
       kwargs: Additional keyword arguments to pass to the pandas/dask to_<format> method
       tables: Allows declaring a subset of tables to download
-    pipeline: The pipeline driving the views of this target. Each View can independently declare a pipeline or all use the shared pipeline defined at the target level
+    pipeline: The pipeline driving the views of this layout. Each View can independently declare a pipeline or all use the shared pipeline defined at the layout level
     views: A list of metrics to monitor and display on the endpoint
       - pipeline: The Pipeline driving the View
         type: The type of View to use for rendering the table
@@ -225,7 +225,7 @@ Each view can be of a different type, but a good starting point is the `hvPlotVi
 In your tutorial, the final dashboard included two `kinds` - scatter and histogram:
 
 ```{code-block} YAML
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     layout: [[0], [1, 2]]

docs/getting_started/lumen_architecture.md

@@ -22,8 +22,8 @@ Manipulating the data with `filters` and `transforms`.
 ::::{grid} 1
 :gutter: 3
 
-:::{grid-item-card} `targets`
-:link: ../user_guide/dashboard.html#targets
+:::{grid-item-card} `layouts`
+:link: ../user_guide/dashboard.html#layouts
 
 The presentation of the manipulated data with `views`.
 :::

docs/how_to/custom_components/local_components.md

@@ -113,7 +113,7 @@ pipelines:
       - type: my_module.StableSor
         by: island
 
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     layout: [[0, 1], [2, 3]]
@@ -234,7 +234,7 @@ pipelines:
       - type: my_library.my_module.StableSort
         by: island
 
-targets:
+layouts:
   - title: Penguins
     pipeline: penguin_pipeline
     layout: [[0, 1], [2, 3]]

docs/how_to/data_intake/cache.md

@@ -9,7 +9,8 @@ This guide will show you how to locally cache data to speed up reloading from a
 
 ## Caching file
 
-When working with large data in a non-optional file format, creating a local cache can be advantageous to save time when reloading the data. Caching a [source](../../reference/source) is done by using `cache_dir` followed by a directory. If the directory does not exist, it will be created. The data will be saved as [parquet](https://www.databricks.com/glossary/what-is-parquet) files in the cache directory.
+When working with large data in a non-optional file format, creating a local cache can be advantageous to save time when reloading the data. Caching a [source](../../reference/source) is done by using `cache_dir` followed by a directory. If the directory does not exist, it will be created. The data will be saved as [parquet](https://www.databricks.com/glossary/what-is-parquet) files in the cache directory and the schema will be stored as a JSON file.
+
 Below is an example of caching a 370 MB file that consists of almost 12 million rows.
 
 ```{warning}
@@ -32,7 +33,7 @@ sources:
     kwargs:
       engine: fastparquet
 
-targets:
+layouts:
   - title: Table
     source: large_source
     views:
@@ -73,3 +74,40 @@ Depending on the source type data caching will cache the entire table or individ
 ```{note}
 Lumen's [cache]() can be added to all [source types](../../reference/source).
 ```
+
+## Precaching
+
+Sources that support caching per query can be made to pre-cache specific Filter and SQLTransform combinations. To enable pre-caching you must initialize a `Pipeline` and then either programmatically request to populate the pre-cache OR supply the pre-cache configuration as part of the YAML specification.
+
+A pre-cache definitions can take one of two forms
+
+- A dictionary containing 'filters' and 'variables' dictionaries each containing lists of values to compute a cross-product for, e.g.
+
+```python
+{
+    'filters': {
+        <filter>': ['a', 'b', 'c', ...],
+        ...
+    },
+    'variables':
+        <variable>: [0, 2, 4, ...],
+        ...
+    }
+}
+```
+
+- A list containing dictionaries of explicit values for each filter and variables.
+
+```python
+[
+    {
+        'filters': {<filter>: 'a'},
+        'variables': {<variable>: 0}
+    },
+    {
+        'filters': {<filter>: 'a'},
+        'variables': {<variable>: 1}
+    },
+    ...
+]
+```

docs/how_to/data_intake/files.md

@@ -28,7 +28,7 @@ sources:
     tables:
       local_table: local_table.csv
 
-targets:
+layouts:
   - title: Table
     source: local_source
     views:
@@ -72,7 +72,7 @@ sources:
     tables:
       remote_table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Table
     source: remote_source
     views:

docs/how_to/data_output/download_data.md

@@ -23,7 +23,7 @@ sources:
     tables:
       penguins: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Table
     source: penguins
     download: csv
@@ -48,7 +48,7 @@ sources:
     tables:
       penguins: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Table
     source: penguins
     download: csv
@@ -73,7 +73,7 @@ sources:
     tables:
       penguins: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Table
     source: penguins
     download: csv

docs/how_to/data_processing/branch_pipeline.md

@@ -30,7 +30,7 @@ pipelines:
       - type: widget
         field: island
 
-targets:
+layouts:
   - title: Penguins
     sizing_mode: stretch_width
     views:
@@ -72,7 +72,7 @@ pipelines:
       - type: columns
         columns: ['species', 'island', 'bill_length_mm', 'bill_depth_mm']
 
-targets:
+layouts:
   - title: Penguins
     sizing_mode: stretch_width
     views:
@@ -107,7 +107,7 @@ pipelines:
       - type: columns
         columns: ['species', 'island', 'bill_length_mm', 'bill_depth_mm']
 
-targets:
+layouts:
   - title: Penguins
     sizing_mode: stretch_width
     views:

docs/how_to/data_visualization/views.md

@@ -13,7 +13,7 @@ A view is the final output of a dashboard, but to be able to create a view, at l
 The following example source is a table containing data about individual penguins with various measurements.
 This source could have been [filtered](../../reference/filter/index.md) or [transformed](../../reference/transform/index.md) but is omitted to keep the example simple.
 
-The views are located in the `targets` area and can take the form of various visual components.
+The views are located in the `layouts` area and can take the form of various visual components.
 Lumen includes many [view types](../../reference/view/index.md) and is built so that you can easily use components from the [Holoviz ecosystem](https://holoviz.org/), such as a [scatter plot from hvPlot](https://hvplot.holoviz.org/reference/pandas/scatter.html) or an [indicator from Panel](https://panel.holoviz.org/reference/index.html#indicators).
 
 ![](../../_static/excalidraw/lumen_dashboard.png)
@@ -35,7 +35,7 @@ sources:
     tables:
       penguin_table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
   - title: Table
     source: penguin_source
     views:

docs/how_to/index.md

@@ -5,8 +5,8 @@ Lumen's How to Guides provide step by step recipes for solving essential problem
 **[General](general/index)**
 * [Validate a specification file](general/validate)
 * [Build a dashboard in Python](general/pipeline_python)
+* [Use variables and references](general/variables_and_references)
 * [Override parameter defaults]() (under construction)
-* [Use variables and references]() (under construction)
 * [Set up authentication]() (under construction)
 
 **[Data intake](data_intake/index)**

docs/how_to/variables_and_references.md

@@ -49,7 +49,7 @@ pipelines:
       - type: columns
         columns: $variables.columns
 
-targets:
+layouts:
 - title: Plot
   pipeline: ticker_pipe
   views:
@@ -93,7 +93,7 @@ sources:
     type: live
     urls: $csv.websites.url
 
-targets:
+layouts:
 - title: Status of websites
   source: live
   views:
@@ -157,7 +157,7 @@ sources:
     tables:
       table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
 - title: Hello my dear friend {{ USER }}
   source: source
   views:
@@ -199,7 +199,7 @@ sources:
     tables:
       table: https://raw.githubusercontent.com/rfordatascience/tidytuesday/master/data/2020/2020-07-28/penguins.csv
 
-targets:
+layouts:
 - title: {{ shell("echo hello from the shell") }}
   source: source
   views: