This is a OpenSCAD for screen case and specially the e-ink Waveshare 7.5" screen.
- Low profile
- Wall mounting system
- Openings to add modules such as buttons
- It is designed to be usable with other displays.
The case consists of 2 main parts, a front panel that will support the screen and a case that will contain the electronics. The 2 parts fit together and are held together by 4 screws in the corners of the case. The 4 M2 screws are screwed into M2x4x3.5 inserts (see picture).
If you need to add things to the box, you can do so via gadgets that will be inserted into the box.
You can add a gadget with 2 buttons using 2 micro-switches Omron D2F-01F-T (see image below).
You will only need to print 2 pieces and depending if you want buttons choose the associated gadgets.
- case.stl
- front.st
- Gadgets:
- gadget.stl x4 if you do not want button
- gadget.stl x3 and gadget-button.stl + button.stl x2 if you want one button gadget
- Insert M2X4X3.5 x4
- M2 x 5mm screws x2
- If you want to use button, you need switch (Omron D2F-01F-T)