A simple browser-based way to communicate with Foscam CGI API compatible HD IP cameras (incl. for example the Opticam brand).
Features:
- Setup the camera, manage users, wifi settings, IP settings
- Supports multiple cameras
- Remembers the configuration and settings
- Settings can be exported as a json file, and imported
- Set motion detection area and schedule
- Get a still image from camera. (Old SD/VGA cameras are supported too.)
- Turn infrared off/on
- ... and almost everything else that can be done with Foscam CGI API
- Monitor selected cameras with a fullscreen view displaying snapshots at a chosen interval. (Old SD/VGA cameras are supported too.)
- Operate PTZ+focus in a pinch
- No ads, no installation, no dependencies or browser plugins. Only a single portable file. Greetings from Finland!
This tool does not
- show video from camera, but only parses the RTSP links to open in another program. Without the video stream, operating PTZ is possible but clumsy.
- support non-HD cameras (they use the older version of the API), except for getting the still image
Download the index.html and open it (with a browser). In practice that can be done at least by 'saving as' the raw view of the index.html. Please read the "Security notes" below. Further instructions are in the tool itself.
Alternatively, you can preview the page by using htmlpreview.github.io, but saving the camera address etc. may not work, or if it does, note that any other *.github.io page can probably read all saved data, including camera credentials as clear-text.
If you are loading the index.html from a local hard drive, or from the Github preview or some other HTTPS source, you may have to manually allow mixed content (e.g. images over HTTP on an HTML page loaded from a local hard drive or HTTPS) in your browser settings. For example by default Firefox no longer supports mixed content since June 2024.
Especially the Operate and Viewer views require images usually over HTTP.
To allow mixed content images in Firefox, open about:config and search and set security.mixed_content.upgrade_display_content.image to false. This way Firefox no longer forces images to be fetched via HTTPS which the IP cameras don't support.
Other ways to make this tool work properly are:
- Host the index.html over HTTP. For example if you have Python installed, run in the directory where you downloaded the index.html,
python3 -m http.server --bind 127.0.0.1 8000and then open in the browserhttp://127.0.0.1:8000. - Alternatively, setup a reverse proxy so that the commands can be sent to cameras over HTTPS. Then the reverse proxy will handle the SSL termination. However, even if this is probably the "correct" way to manage the cameras, and you end up having the data encrypted multiple times, this is often unnecessarily complicated.
- Data is saved to localStorage only on the browser you are using.
- Requests to cameras use unencrypted HTTP and the credentials are clear-text and show up in the browser page history.
- Use this only on your personal machine, and so that the cameras are accessed via LAN (or VPN or similar). On the other hand, if you can access your cameras over the internet without VPN or similar, you should reconfigure your firewalls.
- This is a very simple tool to parse the Foscam API URLs, and therefore best practices in terms of information security, mitigation for XSS etc. are not implemented.
- If you're not sure whether the above isn't a problem in your case, do not input real address or credentials of your cameras. Review the contents of the index.html (which contains HTML, CSS and JavaScript).
- The contents (chapters 2 and 3) of the Foscam PDF were copy pasted into a text file.
- A Python script was created to parse the API into a JSON.
- Everything else was written into the HTML template file. The Python script reads the template file, inserts the parsed JSON into it, and writes the result as the index.html.
- platform-agnostic
- no installation
- no backend (server, other than the browser)
- easy to review, audit and understand by non-web-developers
- no (unnecessary) dependencies
- must be able to setup and manage (while maybe not operate, e.g. PTZ) a camera without using the Windows or browser plugin based 'official' tools
- transparent in terms of the commands sent to camera
- single portable file
- importConfig, exportConfig and fwUpgrade commands (under the System view) are not tested.
- Pull requests or Issues about typos or commands that don't work, and all kinds of testing is welcome.
- The command tables of the PDF should be parsed by using some proper python library or other tool, instead of the ugly python script. However, the format of the produced JSON should be preserved, because the html/javascript depends on it. Also the python script currently includes manual fixes and additions to the PDF contents, which should also be preserved.
- Adding or fixing some commands or their parameters should be done at the end of the python script (instead of directly to the JSON in index.html); otherwise the changes will get overwritten when you run
python3 parse_pdf_to_json.py - Alternatively a complete JSON representation of the Foscam API could be created (even manually). Some other Github projects could benefit from that too.
- As a workaround to CORS, the commands are sent by opening a new tab with the correct URL. This makes it impossible to parse the response and also to real-time-operate the camera (e.g. PTZ). This could possibly be improved, even if some well-known dependency is needed.
- Ideas how to improve the listed Security notes, if they don't conflict with the design choices too much.
Apache-2.0 (c) hyttysmyrkky
This project is not related to Foscam or any other manufacturer, but is fully 3rd-party-contributed. If this repository contains the original API PDF documentation, it shouldn't be considered as a part of this repository in terms of license etc. You should get the latest version of the PDF from the Foscam website. Use at your own risk. I take no responsibility if your IP camera explodes.