Access to FC through ELRS RX Wifi

[ArnoTlse]

Hi,

Following the new feature of ELRS 3.0 which allows now to use Betaflight configurator connected to the FC wirelessly through ELRS RX AP or Home network, I have tried to test it also on Inav Configurator.

I have my drone flashed with the latest Inav (5.1) version and my RX/TX also with the latest ELRS 3.0 version. In the INAV configurator, I have selected the TCP protocol and put the IP address of the RX on my home network. I have found a port number in a thread on ELRS. When I do this, It seems to launch properly the TCP connection, but it seems there is no feedback from FC (after 10s).

I wonder if anyone as succeed to connect INAV configurator to the FC using this features ? Or is there any modification to provide on INAV configurator to make it work in the future ?

Arno

[ArnoTlse]

Hi,

As someone succeed since to do it?
Or is there some modification to provide to inav configurator code to make it work?

Arno

[padcom]

Any progress on that one?

[sixtyfive]

#8691 mentions it is a duplicate of this issue here. But also #8691 is marked as completed. Confused...

[MrD-RC]

#8691 mentions it is a duplicate of this issue here. But also #8691 is marked as completed. Confused...

It is closed because it is a duplicate. It is not complete, just closed.

[padcom]

Cute, iNavFlight/inav#8691 says "Duplicate of #1616" and this one links back to iNavFlight/inav#8691... or am I missing something?

[MrD-RC]

Cute, iNavFlight/inav#8691 says "Duplicate of #1616" and this one links back to iNavFlight/inav#8691... or am I missing something?

You're misreading. 8691 is a duplicate of this issue. Buy mentioning that it is a duplicate of this issue, it creates a reference from this issue to the duplicate. It is not looping back. Note the liks say "Referenced from". The duplicate issue has been closed.

[x8n1620]

Is there any progress on this Topic?
I like the way to configure my betaflight Quads via WiFi and would be lucky to have it on my inav-wings too.

[Belrmar]

On sealed builds like boats this is a big issue for me, every time i want to configure or make some mission planning i have to remove a gasket and several screws, configuring vía wifi would solve a big issue on those kinds of builds