Skip to content

2016 10 24 gensim agenda

Michael Wetter edited this page Nov 22, 2016 · 32 revisions

Agenda for GENSIM Workshop, October 2016

This page contains the agenda and links to slides for the GENSIM workshop. Slides are linked from the agenda below, and all slides, instructions for hands-on examples and models can also be accessed at https://github.com/ibpsa/project1/tree/master/meetings/2016-10-24-gensim.

See also the software installation page.

Monday, October 24, 2016

The meeting is at the Salle de Spectacle.

Time Description Presenter Downloads
10:30 Michael Wetter, LBNL
12:30 Lunch
14:00 Continuation of Modelica training Michael Wetter, LBNL
15:30 Break
16:00 Annex 60 library hands-on training (heat transfer, fluid flow, controls, HVAC) Filip Jorissen, KU Leuven
18:00 Adjourn

Tuesday, October 25, 2016

Time Description Presenter Downloads
8:30 Modelica presentation: Advanced concepts:
  • Algebraic loops and how to avoid them.
  • Practical applications of these guidelines for the configuration of hydronic and air flow circuits, and for steady-state and dynamic balances.
  • Practical applications of these guidelines for flow reversal.
  • How to choose integrator.
Filip Jorissen, KU Leuven Slides.
10:00 Break
10:30
  • TEASER workshop for ROM modeling.
  • Coupled building and HVAC modeling, hands-on training using Annex 60 library.
Moritz Lauster, RWTH Aachen
12:30 Lunch
14:30 FMI and co-simulation presentation and hands-on training. Michael Wetter, LBNL Slides.
15:30 Break
16:00 Hands-on training for how to build a system model, following Boiler model tutorial. Michael Wetter, LBNL
17:00 Continue Annex 60 library hands-on training, drawing examples from some libraries, such as IDEAS for use of advanced concepts. Filip Jorissen, KU Leuven
18:00 Break
18:30 Poster session
19:30 Adjourn

Wednesday, October 26, 2016

Time Description Presenter Downloads
8:30 Modelica Library presentation (15 min. each):
  • Buildings (LBNL)
  • AixLib (RWTH Aachen)
  • IDEAS (KU Leuven)
  • BuildingSystems (Universitaet der Kuenste Berlin)
  • BuildSysPro (EdF)
Discussion.

  • Michael Wetter, LBNL
  • Moritz Lauster, RWTH Aachen
  • Filip Jorissen, KU Leuven
  • Matthis Thorade, UdK Berlin
  • Mathieu Schumann, EDF

10:00 Break
10:30
  • BIM/GIS presentation.
  • BIM training or demonstration.
Matthis Thorade, Universitaet der Kuenste Berlin BIM/GIS slides.
12:30 Lunch
14:00 Hike/walk, until around 18:00.

Thursday, October 27, 2016

Time Description Presenter Downloads
8:30 From building to district energy assessment - stochasticity and flexibility in a bottom-up approach.
  • Benefits and challenges of building design evaluation on a district level.
  • Stochastic occupant behavior and energy flexibility.
Glenn Reynders, KU Leuven Slides.
10:00 Break
10:30 Workshop/training on district energy modeling.
Neighborhood case study simulated with IDEAS library.
Glenn Reynders, KU Leuven
12:30 Lunch
15:00 Modelica model use in building operation: Lessons from Annex 60. Raymond Sterling, Nat. Univ. of Ireland Slides.
16:30 Break
17:00 Workshop: applications and case studies.
  • DACCOSIM, open-source co-simulation master platform.
  • Workflow automation tool.
  • Exporting and importing FMUs.

  • Jean-Philippe Tavella, EdF
  • Simon Roucher, LOCIE
  • Michael Wetter, LBNL
19:00 Adjourn

Friday, October 28, 2016

Time Description Presenter Downloads
9:00 Continuation of IEA EBC Annex 60 as IBPSA Project 1. Michael Wetter, LBNL Slides.
9:45 Round table discussion about Project 1, GENSIM and the Modelica/FMI ecosystem.
11:00 Adjourn
Clone this wiki locally