Marlin 2.0.9.3 built for KP3S OEM titan extruder bltouch, babysteps etc.
; -- BL-TOUCH START GCODE -- G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode M107 ; start with the fan off
; heat bed/hot-end sametime. the wait is after xy homing M140 S{material_bed_temperature}; set bed temp, don't wait M104 S{material_print_temperature} ; set nozzle, don't wait
; confirm BL-touch safety M280 P0 S160 ; BL-Touch Alarm release G4 P100 ; Delay for BL-Touch homing
; homing, bed temp before z to drip at edge G28 X0 Y0 ; move X/Y to min endstops M190 S{material_bed_temperature}; set bed temp (again) and wait G28 Z0 ; move Z to min endstops
; reconfirm BL-touch safety M280 P0 S160 ; BL-Touch Alarm realease G4 P100 ; Delay for BL-Touch
; bed leveling: obmit to load prev mesh ;G29; Auto leveling ;M420 Z5 ; set LEVELING_FADE_HEIGHT ;M500 ; save data of G29 and M420
; load mesh M420 S1 ; enable bed leveling
; add the "Intro Line" G92 E0 ;zero the extruded length G1 Z2 F5000 ;move up slightly
G1 X20 Y2.1 Z0.3 F5000.0 ; Move to start position G1 X150 Y2.1 Z0.3 F1500.0 E15 ; Draw the first line G1 X150 Y2.4 Z0.3 F5000.0 ; Move to side a little G1 X20 Y2.4 Z0.3 F1500.0 E30 ; Draw the second line
; prepare hot-end G92 E0 ; zero the extruded length G1 F200 E3 ; extrude 3mm of feed stock
M117 Printing...
; -- end of BL-TOUCH START GCODE --
; KP3S Custom End G-code G91 ;Relative positioning G1 E-2 F2700 ;Retract a bit G1 E-2 Z0.2 F2400 ;Retract and raise Z G1 X5 Y5 F3000 ;Wipe out G1 Z10 ;Raise Z more G90 ;Absolute positioning
G1 X5 Y170 ;Present print M106 S0 ;Turn-off fan M104 S0 ;Turn-off hotend M140 S0 ;Turn-off bed
M84 X Y E ;Disable all steppers but Z ;If T8x2 add Z
-38 -29 20 34 16 1 apply extruder to gcode
Flow rate: 85.11