This archive contains the source code of VeraCrypt. It is based on original TrueCrypt 7.1a with security enhancements and modifications.

Important

You may use the source code contained in this archive only if you accept and agree to the license terms contained in the file 'License.txt', which is included in this archive.

Note that the license specifies, for example, that a derived work must not be called 'TrueCrypt' or 'VeraCrypt'

Contents

I. Windows Requirements for Building VeraCrypt for Windows Instructions for Building VeraCrypt for Windows Instructions for Signing and Packaging VeraCrypt for Windows

II. Linux and Mac OS X Requirements for Building VeraCrypt for Linux and Mac OS X Instructions for Building VeraCrypt for Linux and Mac OS X Mac OS X specifics

III. FreeBSD and OpenSolaris

IV. Third-Party Developers (Contributors)

V. Legal Information

VI. Further Information

I. Windows

Requirements for Building VeraCrypt for Windows:

• Microsoft Visual C++ 2008 SP1 (Professional Edition or compatible)
• Microsoft Visual C++ 1.52 (available from MSDN Subscriber Downloads)
• Microsoft Windows SDK for Windows 7 (configured for Visual C++)
• Microsoft Windows Driver Kit 7.1.0 (build 7600.16385.1)
• RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20)
• NASM assembler 2.08 or compatible
• gzip compressor

IMPORTANT:

The 64-bit editions of Windows Vista and later versions of Windows, and in some cases (e.g. playback of HD DVD content) also the 32-bit editions, do not allow the VeraCrypt driver to run without an appropriate digital signature. Therefore, all .sys files in official VeraCrypt binary packages are digitally signed with the digital certificate of the IDRIX, which was issued by Thawt certification authority. At the end of each official .exe and .sys file, there are embedded digital signatures and all related certificates (i.e. all certificates in the relevant certification chain, such as the certification authority certificates, CA-MS cross-certificate, and the IDRIX certificate). Keep this in mind if you compile VeraCrypt and compare your binaries with the official binaries. If your binaries are unsigned, the sizes of the official binaries will usually be approximately 10 KB greater than sizes of your binaries (there may be further differences if you use a different version of the compiler, or if you install a different or no service pack for Visual Studio, or different hotfixes for it, or if you use different versions of the required SDKs).

Instructions for Building VeraCrypt for Windows:

1. Create an environment variable 'MSVC16_ROOT' pointing to the folder 'MSVC15' extracted from the Visual C++ 1.52 self-extracting package.

   Note: The 16-bit installer MSVC15\SETUP.EXE cannot be run on 64-bit Windows, but it is actually not necessary to run it. You only need to extract the folder 'MSVC15', which contains the 32-bit binaries required to build the VeraCrypt Boot Loader.

2. If you have installed the Windows Driver Development Kit in another directory than '%SYSTEMDRIVE%\WinDDK', create an environment variable 'WINDDK_ROOT' pointing to the DDK installation directory.

3. Copy the PKCS #11 header files to a standard include path or create an environment variable 'PKCS11_INC' pointing to the directory where the PKCS #11 header files are installed.

4. Open the solution file 'VeraCrypt.sln' in Microsoft Visual Studio 2008.

5. Select 'All' as the active solution configuration.

6. Build the solution.

7. If successful, there should be newly built VeraCrypt binaries in the 'Release' folder.

Instructions for Signing VeraCrypt for Windows:

The folder "Signing" contains a batch file (sign.bat) that will sign all VeraCrypt components using a code signing certificate present on the certificate store and also build the final installation setup. The batch file suppose that the code signing certificate is issued by Thawt. This is the case for IDRIX's certificate. If yours is issued by another CA, then you should put the Root and Intermediate certificates in the "Signing" folder and then modify sign.bat accordingly.

II. Linux and Mac OS X

Requirements for Building VeraCrypt for Linux and Mac OS X:

• GNU Make
• GNU C++ Compiler 4.0 or compatible
• Apple Xcode (Mac OS X only)
• NASM assembler 2.08 or compatible (x86/x64 architecture only)
• pkg-config
• makeself (Linux only)
• wxWidgets 3.0 shared library and header files installed or wxWidgets 3.0 library source code (available at http://www.wxwidgets.org)
• FUSE library and header files (available at http://fuse.sourceforge.net and https://osxfuse.github.io/)
• RSA Security Inc. PKCS #11 Cryptographic Token Interface (Cryptoki) 2.20 header files (available at ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20). They are already included in the source tree under the directory PKCS11 but it is possible to override it using the environment variable 'PKCS11_INC'.

Instructions for Building VeraCrypt for Linux and Mac OS X:

1. Change the current directory to the root of the VeraCrypt source code.

2. If you have no wxWidgets shared library installed, run the following command to configure the wxWidgets static library for VeraCrypt and to build it:

   $ make WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild

   The variable WX_ROOT must point to the location of the source code of the wxWidgets library. Output files will be placed in the './wxrelease/' directory.

3. To build VeraCrypt, run the following command:

   $ make

   or if you have no wxWidgets shared library installed:

   $ make WXSTATIC=1

4. If successful, the VeraCrypt executable should be located in the directory 'Main'.

By default, a universal executable supporting both graphical and text user interface (through the switch --text) is built. On Linux, a console-only executable, which requires no GUI library, can be built using the 'NOGUI' parameter:

$ make NOGUI=1 WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild $ make NOGUI=1 WXSTATIC=1

On MacOSX, building a console-only executable is not supported.

Mac OS X specifics:

Under MacOSX, the SDK for OSX 10.7 is used by default. To use another version of the SDK (e.i. 10.6), you can export the environment variable VC_OSX_TARGET :

$ export VC_OSX_TARGET=10.6

Before building under MacOSX, pkg-config must be installed if not yet available. Get it from http://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz and compile using the following commands :

$ ./configure --with-internal-glib
$ make
$ sudo make install

After making sure pkg-config is available, download and install OSXFuse from https://osxfuse.github.io/ (MacFUSE compatibility layer must selected)

The script build_veracrypt_macosx.sh available under "src/Build" performs the full build of VeraCrypt including the creation of the installer pkg. It expects to find the wxWidgets 3.0.2 sources at the same level as where you put VeraCrypt sources (e.i. if "src" path is "/Users/joe/Projects/VeraCrypt/src" then wxWidgets should be at "/Users/joe/Projects/wxWidgets-wxWidgets-3.0.2")

The build process uses Code Signing certificates whose ID is specified in src/Main/Main.make (lines 167 & 169). You'll have to modify these lines to put the ID of your Code Signing certificates or comment them if you don't have one.

Because of incompatibility issues with OSXFUSE, the SDK 10.9 generates a VeraCrypt binary that has issues communicating with the OSXFUSE kernel extension. Thus, we recommend to use the SDK 10.8 or earlier for building VeraCrypt.

III. FreeBSD and OpenSolaris

FreeBSD and OpenSolaris are not yet supported.

IV. Third-Party Developers (Contributors)

If you intend to implement a feature, please contact us first to make sure:

1. That the feature has not been implemented (we may have already implemented it, but haven't released the code yet).
2. That the feature is acceptable.
3. Whether we need help of third-party developers with implementing the feature.

Information on how to contact us can be found at: https://veracrypt.codeplex.com/

V. Legal Information

Copyright Information

This software as a whole: Copyright (c) 2013-2015 IDRIX. All rights reserved.

Portions of this software: Copyright (c) 2003-2012 TrueCrypt Developers Association. All rights reserved. Copyright (c) 1998-2000 Paul Le Roux. All rights reserved. Copyright (c) 1998-2008 Brian Gladman, Worcester, UK. All rights reserved. Copyright (c) 2002-2004 Mark Adler. All rights reserved. For more information, please see the legal notices attached to parts of the source code.

Trademark Information

Any trademarks contained in the source code, binaries, and/or in the documentation, are the sole property of their respective owners.

VI. Further Information

http://www.veracrypt.fr