NAME

Tiny::YAML - YAML::Tiny Done Right

PREAMBLE

Don't even look at this yet. It's a super early release and will be bootstrapping for a while.

This module uses a real grammar to parse/load YAML.

Stay tuned...

TODO - Funny rant about the shortcomings of YAML::Tiny

SYNOPSIS

Assuming file.yaml like this:

---
rootproperty: blah
section:
  one: two
  three: four
  Foo: Bar
  empty: ~

Read and write file.yaml like this:

use Tiny::YAML;

# Open the config
my $data = Tiny::YAML::LoadFile( 'file.yaml' );

# Get a reference to the first document
my $config = $data->[0];

# Or read properties directly
my $root = $data->[0]->{rootproperty};
my $one  = $data->[0]->{section}->{one};
my $Foo  = $data->[0]->{section}->{Foo};

# Change data directly
$data->[0]->{newsection} = { this => 'that' }; # Add a section
$data->[0]->{section}->{Foo} = 'Not Bar!';     # Change a value
delete $data->[0]->{section};                  # Delete a value

# Save the document back to the file
Tiny::YAML::DumpFile( 'file.yaml' );

To create a new YAML file from scratch:

# Create a new object with a single hashref document
my $data = Dump( { wibble => "wobble" } );

# Add an arrayref document
push @$data, [ 'foo', 'bar', 'baz' ];

# Save both documents to a file
$data->( 'data.yaml' );

Then data.yaml will contain:

---
wibble: wobble
---
- foo
- bar
- baz

DESCRIPTION

Tiny::YAML is a perl class for reading and writing YAML-style files, written with as little code as possible, reducing load time and memory overhead.

Most of the time it is accepted that Perl applications use a lot of memory and modules. The Tiny:: family of modules is specifically intended to provide an ultralight and zero-dependency alternative to many more-thorough standard modules.

This module is primarily for reading human-written files (like simple config files) and generating very simple human-readable files. Note that I said human- readable and not geek-readable. The sort of files that your average manager or secretary should be able to look at and make sense of.

Tiny::YAML does not generate comments, it won't necessarily preserve the order of your hashes, and it will normalise if reading in and writing out again.

It only supports a very basic subset of the full YAML specification.

Usage is targeted at files like Perl's META.yaml, for which a small and easily- embeddable module is extremely attractive.

Features will only be added if they are human readable, and can be written in a few lines of code. Please don't be offended if your request is refused. Someone has to draw the line, and for Tiny::YAML that someone is me.

If you need something with more power move up to YAML (7 megabytes of memory overhead) or YAML::XS (6 megabytes memory overhead and requires a C compiler).

To restate, Tiny::YAML does not preserve your comments, whitespace, or the order of your YAML data. But it should round-trip from Perl structure to file and back again just fine.

FUNCTIONS

Tiny::YAML implements a number of functions to add compatibility with the YAML API. These should be a drop-in replacement.

Dump

my $string = Dump(list-of-Perl-data-structures);

Turn Perl data into YAML. This function works very much like Data::Dumper::Dumper().

It takes a list of Perl data structures and dumps them into a serialized form.

It returns a character string containing the YAML stream. Be sure to encode it as UTF-8 before serializing to a file or socket.

The structures can be references or plain scalars.

Dies on any error.

Load

my @data_structures = Load(string-containing-a-YAML-stream);

Turn YAML into Perl data. This is the opposite of Dump.

Just like Storable's thaw() function or the eval() function in relation to Data::Dumper.

It parses a character string containing a valid YAML stream into a list of Perl data structures representing the individual YAML documents. Be sure to decode the character string correctly if the string came from a file or socket.

my $last_data_structure = Load(string-containing-a-YAML-stream);

For consistency with YAML.pm, when Load is called in scalar context, it returns the data structure corresponding to the last of the YAML documents found in the input stream.

Dies on any error.

DumpFile(filepath, list)

Writes the YAML stream to a file with UTF-8 encoding instead of just returning a string.

Dies on any error.

LoadFile(filepath)

Reads the YAML stream from a UTF-8 encoded file instead of a string.

Dies on any error.

TINY YAML SPECIFICATION

This section of the documentation provides a specification for "Tiny YAML", a subset of the YAML specification.

It is based on and described comparatively to the YAML 1.1 Working Draft 2004-12- 28 specification, located at http://yaml.org/spec/current.html.

Terminology and chapter numbers are based on that specification.

1. Introduction and Goals

The purpose of the Tiny YAML specification is to describe a useful subset of the YAML specification that can be used for typical document-oriented use cases such as configuration files and simple data structure dumps.

Many specification elements that add flexibility or extensibility are intentionally removed, as is support for complex data structures, class and object-orientation.

In general, the Tiny YAML language targets only those data structures available in JSON, with the additional limitation that only simple keys are supported.

As a result, all possible Tiny YAML documents should be able to be transformed into an equivalent JSON document, although the reverse is not necessarily true (but will be true in simple cases).

As a result of these simplifications the Tiny YAML specification should be implementable in a (relatively) small amount of code in any language that supports Perl Compatible Regular Expressions (PCRE).

2. Introduction

Tiny YAML supports three data structures. These are scalars (in a variety of forms), block-form sequences and block-form mappings. Flow-style sequences and mappings are not supported, with some minor exceptions detailed later.

The use of three dashes --- to indicate the start of a new document is supported, and multiple documents per file/stream is allowed.

Both line and inline comments are supported.

Scalars are supported via the plain style, single quote and double quote, as well as literal-style and folded-style multi-line scalars.

The use of explicit tags is not supported.

The use of null type scalars is supported via the ~ character.

The use of bool type scalars is not supported.

However, serializer implementations should take care to explicitly escape strings that match a bool keyword in the following set to prevent other implementations that do support bool accidentally reading a string as a boolean

true|false|null

The use of anchors and aliases is not supported.

The use of directives is supported only for the %YAML directive.

3. Processing Tiny YAML Information

Processes

The YAML specification dictates three-phase serialization and three-phase deserialization.

The Tiny YAML specification does not mandate any particular methodology or mechanism for parsing.

Any compliant parser is only required to parse a single document at a time. The ability to support streaming documents is optional and most likely non-typical.

Because anchors and aliases are not supported, the resulting representation graph is thus directed but (unlike the main YAML specification) acyclic.

Circular references/pointers are not possible, and any Tiny YAML serializer detecting a circular reference should error with an appropriate message.

Presentation Stream

Tiny YAML reads and write UTF-8 encoded files. Operations on strings expect or produce Unicode characters not UTF-8 encoded bytes.

Loading Failure Points

Tiny YAML parsers and emitters are not expected to recover from, or adapt to, errors. The specific error modality of any implementation is not dictated (return codes, exceptions, etc.) but is expected to be consistent.

4. Syntax

Character Set

Tiny YAML streams are processed in memory as Unicode characters and read/written with UTF-8 encoding.

The escaping and unescaping of the 8-bit YAML escapes is required.

The escaping and unescaping of 16-bit and 32-bit YAML escapes is not required.

Indicator Characters

Support for the ~ null/undefined indicator is required.

Implementations may represent this as appropriate for the underlying language.

Support for the - block sequence indicator is required.

Support for the ? mapping key indicator is not required.

Support for the : mapping value indicator is required.

Support for the , flow collection indicator is not required.

Support for the [ flow sequence indicator is not required, with one exception (detailed below).

Support for the ] flow sequence indicator is not required, with one exception (detailed below).

Support for the { flow mapping indicator is not required, with one exception (detailed below).

Support for the } flow mapping indicator is not required, with one exception (detailed below).

Support for the # comment indicator is required.

Support for the & anchor indicator is not required.

Support for the * alias indicator is not required.

Support for the ! tag indicator is not required.

Support for the | literal block indicator is required.

Support for the > folded block indicator is required.

Support for the ' single quote indicator is required.

Support for the " double quote indicator is required.

Support for the % directive indicator is required, but only for the special case of a %YAML version directive before the --- document header, or on the same line as the document header.

For example:

%YAML 1.1
---
- A sequence with a single element

Special Exception:

To provide the ability to support empty sequences and mappings, support for the constructs [] (empty sequence) and {} (empty mapping) are required.

For example,

%YAML 1.1
# A document consisting of only an empty mapping
--- {}
# A document consisting of only an empty sequence
--- []
# A document consisting of an empty mapping within a sequence
- foo
- {}
- bar

Syntax Primitives

Other than the empty sequence and mapping cases described above, Tiny YAML supports only the indentation-based block-style group of contexts.

All five scalar contexts are supported.

Indentation spaces work as per the YAML specification in all cases.

Comments work as per the YAML specification in all simple cases. Support for indented multi-line comments is not required.

Separation spaces work as per the YAML specification in all cases.

Tiny YAML Character Stream

The only directive supported by the Tiny YAML specification is the %YAML language/version identifier. Although detected, this directive will have no control over the parsing itself.

The parser must recognise both the YAML 1.0 and YAML 1.1+ formatting of this directive (as well as the commented form, although no explicit code should be needed to deal with this case, being a comment anyway)

That is, all of the following should be supported.

--- #YAML:1.0
- foo

%YAML:1.0
---
- foo

% YAML 1.1
---
- foo

Support for the %TAG directive is not required.

Support for additional directives is not required.

Support for the document boundary marker --- is required.

Support for the document boundary market ... is not required.

If necessary, a document boundary should simply by indicated with a --- marker, with not preceding ... marker.

Support for empty streams (containing no documents) is required.

Support for implicit document starts is required.

That is, the following must be equivalent.

# Full form
%YAML 1.1
---
foo: bar

# Implicit form
foo: bar

Nodes

Support for nodes optional anchor and tag properties is not required.

Support for node anchors is not required.

Support for node tags is not required.

Support for alias nodes is not required.

Support for flow nodes is not required.

Support for block nodes is required.

Scalar Styles

Support for all five scalar styles is required as per the YAML specification, although support for quoted scalars spanning more than one line is not required.

Support for multi-line scalar documents starting on the header is not required.

Support for the chomping indicators on multi-line scalar styles is required.

Collection Styles

Support for block-style sequences is required.

Support for flow-style sequences is not required.

Support for block-style mappings is required.

Support for flow-style mappings is not required.

Both sequences and mappings should be able to be arbitrarily nested.

Support for plain-style mapping keys is required.

Support for quoted keys in mappings is not required.

Support for ?-indicated explicit keys is not required.

Here endeth the specification.

Additional Perl-Specific Notes

For some Perl applications, it's important to know if you really have a number and not a string.

That is, in some contexts is important that 3 the number is distinctive from 3 the string.

Because even Perl itself is not trivially able to understand the difference (certainly without XS-based modules) Perl implementations of the Tiny YAML specification are not required to retain the distinctiveness of 3 vs 3.

SUPPORT

Bugs should be reported via the CPAN bug tracker at "/github.com/ingydotnet/tiny-yaml- pm/issues" in http:

AUTHOR

Ingy döt Net <ingy@cpan.org>

SEE ALSO

YAML::Tiny

YAML

YAML::Syck

Config::Tiny

CSS::Tiny

COPYRIGHT

Copyright 2014 Ingy döt Net

This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.