Skip to content

Part 3. Adding Sensors

Jump to bottom Edit New page
Rachel edited this page Jul 21, 2015 · 1 revision

yuncircuitrealpic

It's finally time to start adding some sensors to our Yun. Lucky for us, this is as easy as connecting a jumper wire from the Yun to a sensor. The small breadboard lets us share the Yun's 3.3V power supply and ground connection. We'll wire everything up and then test our sensors to make sure they're working.

<< Part 2. Installing the Arduino IDE and Libraries - Part 3: Wiring the Circuits >>

Initial State (https://www.initialstate.com)

(c) 2018 Initial State Technologies, Inc.

Arduino Streaming Sensor Box

Clone this wiki locally