Skip to content
/ cset Public
forked from cisagov/cset

Cybersecurity Evaluation Tool

License

Notifications You must be signed in to change notification settings

itcms/cset

 
 

Repository files navigation

CSET 10.1.1

Download CSET For Windows: CSET 10.1.1 Standalone Installer

What is CSET? CSET Overview

How Do I Use CSET? CSET User Guide


File Checksum Integrity Verifier version 2.05. csetstandalone.exe

License

MIT License, Apache License 2.0

Copyright 2018 Battelle Energy Alliance, LLC

See License.txt, and NOTICE.txt

Contact information of authors: cset@hq.dhs.gov

Idaho National Laboratory, P.O. Box 1625, MS 3870, Idaho Falls, ID 83415

Includes software licensed under LGPL

LGPL dependencies are required to build CSET. You will be required to aquire them via nuGet in order to build this software. They are not distributed with this source.

This application uses Hangfire software as a nuGet dependency.

Using the CSET Stand-alone Installer

Double-click on the CSETStandAlone program.

The User Account Control dialogue will come up (Fig.1). Select "Yes".

Figure 1: User Account Control box

A CSET dialogue will open asking if you want to install the CSET Desktop (Fig.2). Select "Yes".

Figure 2: Install dialogue

The program will begin extracting.

After extracting a CSET Setup dialogue will open (Fig.3). Select "Install".

Figure 3. CSET Setup

CSET will begin to install. If the user doesn't have IIS 10.0 Express, CSET will install it. The IIS 10.0 Express Setup dialogue will open (Fig.4). Click the check box to confirm that you "…accept the terms in the License Agreement", and then select "Install".

Figure 4. IIS Setup

IIS will install. Select "Finish" when it completes.

The CSET Setup Wizard will open to walk the user through the install process (Fig.5). Select "Next".

Figure 5: Setup Wizard

A disclaimer will open (Fig.6). Read through and then click the box "I read the disclaimer", and select "next".

Figure 6: Disclaimer

CSET will choose a default folder to install CSET to, but you can change this in the Destination Folder dialogue (Fig.7). Select "Next".

Figure 7: Destination Folder

The CSET Installer will show that it is ready to install (Fig. 8), select "Install".

Figure 8: Ready to Install

CSETis installed. Make sure that the "Launch CSET when setup exists" box is checked, and select "Finish".

The user should see a setup successful dialogue (Fig.9), and then have an option of how they want to open the app. For this example, Edge was used.

![][fig9.png]

Figure 9: Setup Successful

The user has access to CSET as Local User. The Local Installation ribbon is visible at the top of the screen. They can see their landing page with no assessments at this time (Fig.10).

Figure 10: Local Install Landing Page




CSET Enterprise Installation Instructions

Introduction

This documentation is provided to assist users in navigating the basics of the CSET® Enterprise Edition. Here users will find step-by-step directions for installation, configuration, and setup, as well as links to various resources to assist in this process.

Prerequisites & Necessary Files

  1. Download the CSET Enterprise Files from the CSET® releases page. Click "CSET_10.1-Binary.zip" file to download it. Once the download is complete, you will need to unzip the folder.

  2. We will be using Microsoft SQL Server 2016 for this setup. If you need to, you can download the Express version from Microsoft directly a. CSET® requires your server to have the URL Rewrite Module installed as well. Again, this can be downloaded directly from Microsoft

  3. If you are using an SQL Server, download and install Microsoft SQL Server Management Studio (SSMS)

Installing IIS

  1. On your Windows Server, open the “Server Manager” application.


  1. Click “Add Roles and Features.” This should open the Roles and Features Wizard that will guide you through the installation process.


  • Installation Type – This should default to “Role-based or feature-based installation.” If it does not, please select this option.
  • Server Selection – Choose the server you plan on running CSET® on.
  • Server Roles – Select the “Web Server (IIS)” check box. Add any features the program prompts you for.
  • Features – The defaults will work just fine for running CSET®, however you may add any additional features you wish.
  • Web Server Role (IIS) – Click “Next.”
  • Role Services – Under Common HTTP Features, select “HTTP Redirection.” Under Application Development, select “ASP.NET 4.7” and add any features the program prompts you for. (Please note: ASP.net 4.7.2 or higher is required for CSET to run properly. If you have anything less than that, you will need to download the latest version from Microsoft directly.)
  • Confirmation – Click “Install”. Close out of the Wizard when installation is complete.
  1. It may be necessary to create a new IIS Application Pool for your CSET Installation to run properly. When setting up the application in IIS, create a new Application Pool for CSET and give it the identity of the account you want to access the SQL Server with. Provided below are links to the official Microsoft documentation for this process.
  • To read more about IIS Application Pool creation click here.
  • To read more about Pool Identification click here.


SQL Server Installation

  1. To begin the process of installing a new SQL Server on your machine (see below):
  • Open Microsoft’s “SQL Server Installation Center”
  • On the left, select “Installation”
  • Click “New SQL Server stand-alone installation”


  • Input your product key (if needed) and accept the licensing terms to continue the installation.

  • The defaults for most of the sections will be just fine. However, the two sections you will need to modify are “Feature Selection” and “Database Engine Configuration.”

  • Feature Selection (see below) – When you are prompted to select specific server features, check the “Database Engine Services” box and then continue.

  • Database Engine Configuration (see below) – At the Database Engine Configuration screen, select the “Mixed Mode (SQL Server authentication and Windows authentication)” option.

  • Under the same section, you will be asked to create and input a password for the system administrator account. Make sure to remember this information!

  • Finally, click the Add Current User button at the bottom. This will populate your current windows account as a user. Once that is complete, click “Next.”

  • The final step is to click the Install button to finish up this process. Once this is complete, you can close out of the Server Setup window.

  1. Once your server is up and running, you will need to install the URL Rewrite Module. Simply download the file from Microsoft (see Page 2 links or above hyperlink) and run the application to install the necessary patch.

Firewall Configuration

  1. Open Windows Defender Firewall

  1. On the left, select “Advanced Settings.”
  • Inside the new window, double-click “Inbound Rules” and then select “New Rule” on the right (see below).

  • Rule Type – Select “Port” as the new rule type and click “Next.”
  • Protocol and Ports (see below) – Change the rule to apply to “Specific local ports” and enter your desired port. Once that is finished, click “Next.”

  • Action – Select the “Allow the connection” radio button. This should be selected by default. Click “Next.”
  • Profile – Choose what type of networks you wish to allow connections from. If you are unsure, leave them all checked. Click “Next.”
  • Name – The final step is to create a name and description for this new rule. Once you’ve done this, click “Finish.”

Database Setup

  1. Open the CSET® Dist folder that you downloaded earlier and navigate to the “Data” subfolder. Inside this folder you will find two files called “CSETWeb” and “CSETWeb_log.” Copy these two files to your server.

  2. Open Microsoft SQL Server Management Studio (see below) and connect to the SQL Server that we setup previously.

  • Open the “Connect to Server” dialog box.

  • Change the server name to “localhost” or whatever name you have specified for your server already.
  • Your Server can be run through either the “SQL Server Authentication,” which will require the login information you created earlier, or you can use the Windows Authentication, which will not require any login information as the server will verify your identity through your Windows account.

  1. Inside the Object Explorer on the left, right-click the Database folder (see below) and then click “Attach.”

  • This will bring up the “Attach Databases” dialog box (see below). Click the Add button and navigate to the location where you previously saved/copied the CSETWeb.mdf file. Click on the file and then click “OK,” and then click “OK” again to attach the database.

  • You’ll know you’ve completed this step successfully when you can see the “CSETWeb” object appear under the Databased section in the Object explorer.

Create Database User

  1. Peviously we created our SQL Server account. We will now need to create an account that has access to the database. Continuing in the Object Explorer, right-click on the folder named Security, hover over New (see below) and then click “Login.”

  • In the next window (see below), enter a login name, select the “SQL Server authentication” radio button, and then enter a password. If you choose to go through the Windows authentication, you will not need to enter a password.
  • At the bottom of the box, change the Default database to CSETWeb.

  • At top-left from the window shown below, click “User Mapping” and then select the CSETWeb checkbox. Then click “OK.”

  1. Back in the Object Explorer of SSMS (see below), expand the CSETWeb list, followed by Security and then Users. You should see the new user you created listed here. For us, it’s simply “user”. Right-click on your user’s name and select properties.

  • In the dialog box that pops up, select “Securables” from the menu on the left if it is not already selected.
  • Click the Search button to generate another dialog box. Make sure the “Specific objects…” radio button is selected and then click “OK.”

  • Once you hit OK, you should see yet another box pop-up titled “Select Object.” Click the button that says Object Types… This will generate a list of object types. Scroll down until you see the “Schemas” object (see below). Check this box, and then click “OK.”

  • Next, click "Browse" and select the "dbo" checkbox. Then click "Ok".

  • Once we have our dbo inside our Securables, we need to grant it permissions. Scroll through the list of permissions and when you find the "Execute" permission, select the "Grant" checkbox.

  • Our final step is to go over to the Membership page (see below) and select the checkboxes for “db_datareader” and “db_datawriter.” Then select “OK.”

CSET Installation

  1. Re-open Windows Server Manager (see below). Double-click on “IIS” on the left. Then, right-click on the server name and click “Internet Information Services (IIS) Manager.”

  • As seen in the picture below, expand the server’s name drop-down list and then expand the Sites drop down list. You should see a “Default Web Site” item. Right-click this item and select “Explore”. This will open the “wwwroot” folder.
  • Delete everything inside this folder EXCEPT for the “aspnet_client subfolder”.
  • If you’ve done any kind of changes or work inside this folder previously, we recommend copying the contents to preserve those changes as deleting the files will erase any changes you have made.
  • Copy all of contents from inside the CSET® Dist folder you downloaded and place them into your "wwwroot" folder.

CSET Configuration

  1. Locate the "Web.config" file that should now be inside the “wwwroot” folder. Open this file using a text editor such as notepad.

  • Scroll to the bottom of the document and you will find the "connectionStrings" section. We will need to edit these to correctly connect to CSET®.
  • On each of the lines inside the two connection string tags, there is a part that says “data source=…” You will need to change the part after the equals sign to the IP address or domain name of the machine on which the SQL Server is running.

  • If IIS and the SQL Server instance are running on the same machine, you can use “localhost” as the domain name. Otherwise, you will need the specific domain or IP address to connect properly.

  • On each of the same lines, you will need to update the “Integrated Security=SSPI” section to reflect your SQL Server specific login info.

  • If you are using the Windows domain authentication method, then you will use “Trusted_Connection=SSPI” instead of a user ID and password

  • Save and close the Web.config file.

  • If you receive an error stating that you do not have permissions to save the Web.config file, find the file inside the wwwroot folder and right-click on it. Select properties and go into the security tab. Click on the edit button and make sure that all users have “Full Control” over the file.

  • Go back to the “Internet Information Services (IIS) Manager” and on the right, make sure the server is running. You may now browse to your Enterprise CSET® Installation!

Other Steps (Optional)

Creating CSET User

There are two ways to add a new user to your freshly created CSET® Stand-Alone. The first way is to register for a new account inside the CSET® application itself. This will require a valid mail host as user’s will be required to enter their email address and receive a confirmation email on your network.

  1. Using a browser, navigate to your CSET® webpage.
  2. At right, select “Register New User Account.”
  3. Enter your information (name, email, and security questions), and select “Register.”
  4. A confirmation email will be sent to the email you entered. This email will contain a temporary password that will allow you to login to the CSET® Application.
  5. Once a user has logged in for the first time, they will be prompted to create their own password to replace the temporary one.

The second way to add a new user to your CSET® Application is to use the “AddUser” program. This tool is intended more for testing purposes than company-wide use. It allows anybody to create a new user without the email check and should only be used by administrators. As such, do not place this program in a public or shared folder on your system. This tool can be downloaded from the CSET github page found here. Simply click on the "AddUser.zip" link to download the file.

  1. Inside the “AddUser” folder, you will find a file called “AddCSETUser.exe”. It’s a config file. Open this file with a text editor such as notepad.
  • Inside the "connectionStrings" tags, you will need to change your “data source=” to the IP Address or domain of your server.
  • You will then need to change the “user id=” and “password=” to the admin account you created previously.
  • Save and close the file.
  1. Double-click on the “AddCSETUser” application and a small dialog box should pop-up with entry fields to add a new CSET® User.

  • Enter the required information and click “Save.”
  • If you’ve connected with the server properly, you will see small green text at the bottom-left of the box that says, “Added Successfully”. You may now login to CSET® using that user account.

Mail Host Configuration

  1. Inside your “wwwroot”, open the Web.config file.
  • Inside the config file, you will need to locate the “SMTP Host”, and “Sender Email” portions.

  • Edit the text after the equal sign of value to your domain name. (e.g. value=”mailhost.YOURDOMAIN.com”).
  • Save and close the file when you are finished.

SSL Security Certificate for Extra Security

An SSL certificate is a web technology that establishes a secure link between a web server and a browser. This link encrypts all data (such as passwords) so that your server is more secure.

  1. You can follow this tutorial to add an SSL certificate to your CSET® stand-alone.

CSET Local Developement Installation Instructions

Introduction

This documentation is provided to assist users in installing and running CSET locally for development.

Prerequisites & Necessary Files

  1. Windows OS required either via Windows machine or VM
  2. Node.js which can be downloaded and installed here at the node website.
  3. Angular 2 for CSETWebApi. You can find local installation here at the angular website and along with docs.
  4. Git tools for Windows.
  5. Visual Studio 2019 (Community Edition is fine) which can be downloaded here
  6. VS Code which can be downloaded here.

Note: VSCode and Visual studio are two diffent IDE's VS Code is used for Front end UI (CSETWenNg) while Visual Studio is used for the backend (CSETWebAPI)

Installation

  1. Clone CSET github repo.
  2. Move into project cd cset

Setting up Angular Web UI

Here you can open VSCode and run these commands from the terminal within VSCode.

  1. Move to angular folder cd CSETWebNg
  2. Install packages npm install or npm i
  3. Run server ng serve

Setting up Backend Api

  1. Follow Steps above for setting up DB:
    1. CSET Enterprise Installation Instructions
    2. SQL Server Installation
    3. Firewall Configuration
    4. Database Setup
    5. Create Database User
  2. Open CSET with Visual Studio.
  3. Select CSETWeb_Api.sin for project file.
  4. Open Web.config and change the settings in connectionStrings according to CSET Configuration
  5. Build solution and run within Visual Studio by selecting the play button on the top with "IIS Express"


This will open a window in the default web browser to confirm that the db is connected.

Trouble shooting Dev installation

Issues running ng serve

  1. Delete node_modules
  2. clear cache npm cache clear --force
  3. reinstall packages npm install
  4. rerun server ng serve

Package issues when running ng serve

Example: When Atampting to run the server, there is a issue that presents such as:

SyntaxError: Unexpected token 'if'

or when inspected via a log file:

[error] /Users/bob/projects/cset/CSETWebNg/node_modules/lodash/lodash.js:3980
        if ((key === '__proto__' || key === 'constructor' || key === 'prototype')) {
        ^^
SyntaxError: Unexpected token 'if'
    at wrapSafe (internal/modules/cjs/loader.js:1053:16)
    at Module._compile (internal/modules/cjs/loader.js:1101:27)
    ...

Here the issue is with the package seen: lodash

To fix this simplie run npm install --save lodash

After installing, rerun server ng serve

To run production locally:

Copy values from:

../cset/CSETWebNg/src/environments/environment.ts

into

../cset/CSETWebNg/src/environments/environment.prod.ts

with production: true

then run ng serve --prod

Error within compailing server

Moustrap Error:

When compiling, an error shows:

ERROR in node_modules/angular2-hotkeys/lib/hotkeys.service.d.ts:10:16 - error TS2304: Cannot find name 'MousetrapInstance'.
10     mousetrap: MousetrapInstance;
                  ~~~~~~~~~~~~~~~~~
** Angular Live Development Server is listening on localhost:4200, open your browser on http://localhost:4200/ **
70% building 504/504 modules 0 active    
    ERROR in node_modules/angular2-hotkeys/lib/hotkeys.service.d.ts:10:16 - error TS2304: Cannot find name 'MousetrapInstance'.
    10     mousetrap: MousetrapInstance;

Fix: open file location at node_modules/angular2-hotkeys/lib/hotkeys.service.d.ts and fix the line where

mousetrap: MousetrapInstance;

to

mousetrap: Mousetrap.MousetrapInstance;

Issues Running CSETWebApi

CSETWebApi not building.

On right side of Visual Studio, check under resorces for missing and un updated packages.

reimport and updarte packages as needed. recompile as needed.

CSETWebApi runs but cannot connect to DB

Withing connectionStrings in Web.config check if creds are set correctly, for local db, the connetion string would look as follows.

  <connectionStrings>
    <add name="CSET_DB"
      connectionString="data source=localhost;initial catalog=CSETWeb;persist security info=True;user id=user;password=password;MultipleActiveResultSets=True"/>
    <add name="ElmahConn"
      connectionString="data source=localhost;initial catalog=CSETWeb;persist security info=True;user id=user;password=password;MultipleActiveResultSets=True;App=Elmah"
      providerName="System.Data.EntityClient"/>
    <add name="HangfireConn"
      connectionString="data source=localhost;initial catalog=CSETWeb;persist security info=True;user id=user;password=password;MultipleActiveResultSets=True;App=Hangfire"
      providerName="System.Data.EntityClient"/>
  </connectionStrings>

These settings will connect to a SQL DB running on localhost with created user: user with password: password.

Double check CSET Configuration above for configuration.

About

Cybersecurity Evaluation Tool

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • TSQL 71.6%
  • JavaScript 13.1%
  • HTML 9.5%
  • C# 3.0%
  • TypeScript 1.2%
  • SCSS 0.9%
  • Other 0.7%