Connection refused to port 8675, RPi #55
Replies: 2 comments 13 replies
-
A few things to try:
|
Beta Was this translation helpful? Give feedback.
-
hi @jasonacox, thanks for the fast reply! I did post this under discussion Q&A, but will keep it here. Interesting, 10.0.1.2 didn't work (I thought that was the same as localhost); however, if I use the IP of the machine on the local network (192.168...), I still get the same response. Likewise, http://192.168.0.80:8675/stats also shows Unable to Connect. I've closed other open tabs first. It's like there is a firewall on port 8675, but I'm not running any firewall on the RPi I see you've move this here (discussion) now, so will respond here. |
Beta Was this translation helpful? Give feedback.
-
Hi
setup.sh seemed to work fine while installing PD on a RPi4; however, when I pull up Powerwall Power Flow dashboard, the Power Flow window shows "Unable to connect" to localhost:8675. If I point a browser to that port, I get a similar message about site can't be reached.
Any suggestions? Note, my powerwall+ and solar was just installed, but the inverter has some issues and so the system is in standby as they try to troubleshoot that. However, if I log into the gateway it shows the Tesla graphic with power being supplied by the grid. So that's working.
Thanks!
Beta Was this translation helpful? Give feedback.
All reactions