Openscad files for corexz project
This is very much a work in progress. The vitamins I used are: - 80/20 series 2020 aluminum extrusions. These measure 20mm x 20mm. - The T nuts were purchased from openbuilds.com as were the - V wheels I use for pulleys. - The guitar tuners were purchased through amazon at http://www.amazon.com/gp/product/B0099DMFK2/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
The Y axis is not fully worked out. I need to decide whether I am staying with the traction drive or going back to the spool drive. Once this decision is made, I'll know the location of the strings and I'll design the Y axis around them.
I have also not yet decided on an extruder. I want to run dual extruder and am presently leaning towards these: http://www.thingiverse.com/thing:158530, although I will need to work out my own carrier for them
Pictures are located here: https://lh5.googleusercontent.com/-_zCLDA7PiDk/VC32yQiYTWI/AAAAAAAAAvc/4eMqskdXaLQ/w1556-h875-no/20141002_201550.jpg https://lh5.googleusercontent.com/-AHBEF-j5TMk/VC32yG09grI/AAAAAAAAAvY/wz9iraj6bsU/w1556-h875-no/20141002_201604.jpg https://lh3.googleusercontent.com/-LTQwNcUeDB0/VC32ydi6aJI/AAAAAAAAAvk/4jMa3FIiY7Q/w1556-h875-no/20141002_201610.jpg https://lh5.googleusercontent.com/-KbrakcSKpnw/VC32y9DItmI/AAAAAAAAAvs/fc2YTehpmQY/w1556-h875-no/20141002_201620.jpg https://lh4.googleusercontent.com/-ywNi4GV8ljM/VC32zez3sBI/AAAAAAAAAv4/eBDjquT6VZM/w1556-h875-no/20141002_201626.jpg https://lh5.googleusercontent.com/-chO5x3rTZ6s/VC32ziqTgbI/AAAAAAAAAv8/yXIZvbZ6JrU/w1556-h875-no/20141002_201657.jpg https://lh4.googleusercontent.com/-FEJFaWBmaSE/VC32zywFLxI/AAAAAAAAAwE/Ksi4-UBp6_c/w1556-h875-no/20141002_201703.jpg https://lh3.googleusercontent.com/-LyTDfvW9mPg/VC320bls-fI/AAAAAAAAAwI/vzYTX9uXMls/w1556-h875-no/20141002_201712.jpg https://lh6.googleusercontent.com/-paMYfrYL-lU/VC321I6w2oI/AAAAAAAAAwQ/i96jvuiBbLI/w1556-h875-no/20141002_201725.jpg
