After updating to v2024.7.4: No weather data to parse for mapping 0 #430
Comments
|
You have to go to SmartIrrigation settings in Integrations in HA, click Configure and check 'Use weather service'. Next you have to go to SI in sidebar and in 'Sensor groups' tab you have to select 'Weather service' where you don't use sensors. |
|
So why do i need to actiivate weatherservice if i don't use it? I'm using only weatherstatyion sensors already available. As soon as i enable continous updates the following my log is flooded with the following errors: 2024-07-11 10:11:37.147 ERROR (MainThread) [homeassistant] Error doing job: Task exception was never retrieved (None) |
|
I completely removed the integration and set it up again, but the same issues return.. |
|
I select weather service and i have the same issue. No weatherdata at all.
|
|
@collateral87 please open a separate issue. |
|
@posixx so without the experimental feature on you are not getting any updates? did the update actually run (if you go into the UI for smart irrigation you can check when it was last updated / calculated). |
|
I switched from passthrough to PyETO with solrad behaviour to not calculate and forecast 3 days. That way continous updates works. I see you have released v2024.7.5; does this fix both issues? The "No weather data to parse for mapping 0" warning every hour AND "AttributeError: 'Passthrough' object has no attribute '_forecast_days'" warning? |
|
Yes, it should fix both. |
|
Yes it seems the warnings are gone; using passthrough again as my weatherstation has a ET sensor. one question about the pressure sensor: Davis weatherstation uses configured height of station placement for sea-level pressure display so it can be compared with other stations. So the value it shows is the pressure as was the station placed on sea-level. Using your sensor configuration; would this be absolute or relative setting? |
|
that's relative: https://ambientweather.com/faqs/question/view/id/1591/... Also from the readme: If you are using your own barometric pressure sensor, enter either the absolute or relative barometric pressure. Absolute barometric pressure is the actual pressure measured at your location and relative barometric pressure is the pressure calculated at sea level. Make this clear in the selection box. |
|
Jeroen, My log was flooded with the following errors: 2024-07-13 06:59:06.754 ERROR (MainThread) [custom_components.smart_irrigation.calcmodules.passthrough] No Evapotranspiration data specified for Passthrough module This started right after the daily calculation and till the last time above, From then on it disappeared. Could this be due to the ET sensor being reset to 0 at 0:00h? Also another observation; yesterday it rained 17mm during the day, but still, the calculation added 1,6 mm to the bucket? I would expect to have 17mm substracted from the stock bucket value? |
|
Yes, definitely a bug: as soon as my ET sensor is reset to 0.0 eventlog is flooded again probably until sensor > 0.0 |
|
Also after changing pressure to relative I get every hour: 2024-07-14 01:47:24.950 ERROR (SyncWorker_46) [homeassistant] Error doing job: Task exception was never retrieved (None) |
|
Oh and I disabled continuous updates because of the flooding and now no calculation is done at the end of the day. Could be related to the problem above? |
What happened?
I updated to the latest version coming from the previous stable version a few months old. I’m using my own weatherstation sensors only. Since reboot I get every hour:
2024-07-11 01:29:36.469 WARNING (MainThread) [custom_components.smart_irrigation] [async_update_all] No weather data to parse for mapping 0
2024-07-11 02:29:36.470 WARNING (MainThread) [custom_components.smart_irrigation] [async_update_all] No weather data to parse for mapping 0
2024-07-11 03:29:36.471 WARNING (MainThread) [custom_components.smart_irrigation] [async_update_all] No weather data to parse for mapping 0
2024-07-11 04:29:36.472 WARNING (MainThread) [custom_components.smart_irrigation] [async_update_all] No weather data to parse for mapping 0
How to reproduce
Wait an hour, it will happen every hour as hourly update is configured.
Relevant log output
Which version are you running?
V2024.7.4
Diagnostics file
Additional information
{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2024.7.2",
"dev": false,
"hassio": true,
"virtualenv": false,
"python_version": "3.12.4",
"docker": true,
"arch": "x86_64",
"timezone": "Europe/Amsterdam",
"os_name": "Linux",
"os_version": "6.6.33-haos",
"supervisor": "2024.06.2",
"host_os": "Home Assistant OS 12.4",
"docker_version": "26.1.4",
"chassis": "embedded",
"run_as_root": true
},
"custom_components": {
"kia_uvo": {
"documentation": "https://github.com/Hyundai-Kia-Connect/kia_uvo",
"version": "2.26.0",
"requirements": [
"hyundai_kia_connect_api==3.22.0"
]
},
"pyscript": {
"documentation": "https://github.com/custom-components/pyscript",
"version": "1.5.0",
"requirements": [
"croniter==1.3.8",
"watchdog==2.3.1"
]
},
"zidoo": {
"documentation": "https://www.github.com/wizmo2/zidoo-player",
"version": "2.0.1",
"requirements": []
},
"afvalbeheer": {
"documentation": "https://github.com/pippyn/Home-Assistant-Sensor-Afvalbeheer",
"version": "5.3.5",
"requirements": [
"rsa",
"pycryptodome"
]
},
"buienalarm": {
"documentation": "https://github.com/gieljnssns/buienalarm-sensor-homeassistant/tree/master",
"version": "1.9",
"requirements": [
"pybuienalarm==0.1.1"
]
},
"smart_irrigation": {
"documentation": "https://github.com/jeroenterheerdt/HASmartIrrigation",
"version": "v2024.7.4",
"requirements": []
},
"easee": {
"documentation": "https://github.com/nordicopen/easee_hass",
"version": "0.9.59",
"requirements": [
"pyeasee==0.8.1"
]
},
"hacs": {
"documentation": "https://hacs.xyz/docs/configuration/start",
"version": "1.34.0",
"requirements": [
"aiogithubapi>=22.10.1"
]
}
},
"integration_manifest": {
"domain": "smart_irrigation",
"name": "Smart Irrigation",
"codeowners": [
"jeroenterheerdt"
],
"config_flow": true,
"dependencies": [
"http",
"panel_custom"
],
"documentation": "https://github.com/jeroenterheerdt/HASmartIrrigation",
"iot_class": "local_push",
"issue_tracker": "https://github.com/jeroenterheerdt/HASmartIrrigation/issues",
"requirements": [],
"version": "v2024.7.4",
"is_built_in": false
},
"setup_times": {
"null": {
"setup": 0.0001160898245871067
},
"b0a728f53e166f1e6513da60a7130f51": {
"wait_import_platforms": -5.429051163839176,
"config_entry_setup": 5.539903113152832
}
},
"data": {
"use_weather_service": false,
"weather_service": null,
"store": {
"config": {
"calctime": "23:55",
"units": "metric",
"use_weather_service": false,
"weather_service": null,
"autocalcenabled": true,
"autoupdateenabled": true,
"autoupdateschedule": "hours",
"autoupdatedelay": "0",
"autoupdateinterval": "1",
"autoclearenabled": true,
"cleardatatime": "23:59",
"starteventfiredtoday": false,
"continuousupdates": false
},
"mappings": [
{
"id": 0,
"name": "Davis Vantage Pro Weerstation",
"mappings": {
"Dewpoint": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_dauwpunt",
"unit": ""
},
"Evapotranspiration": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_verdamping",
"unit": ""
},
"Humidity": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_luchtvochtigheid",
"unit": ""
},
"Precipitation": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_regenhoveelheid_dag",
"unit": ""
},
"Pressure": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_barometer",
"unit": "millibar"
},
"Solar Radiation": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_zonnestraling",
"unit": "W/m2"
},
"Temperature": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_buitentemperatuur",
"unit": ""
},
"Windspeed": {
"source": "sensor",
"sensorentity": "sensor.davis_vantage_pro2_windsnelheid_gemiddeld",
"unit": "km/h",
"aggregate": "average"
}
},
"data": [
{
"retrieved": "2024-07-11T00:06:37.868737"
}
],
"data_last_updated": "2024-07-11T00:06:37.868792"
}
],
"modules": [
{
"id": 2,
"name": "Passthrough",
"description": "Geeft waarde van ET sensor as verandering terug.",
"config": {},
"schema": []
}
],
"zones": [
{
"id": 0,
"name": "Voortuin",
"size": 80.0,
"throughput": 9.0,
"state": "automatic",
"bucket": -1.3966115997900619,
"old_bucket": 0,
"delta": 0,
"duration": 745,
"module": 2,
"multiplier": 1.0,
"explanation": null,
"mapping": 0,
"lead_time": 0.0,
"maximum_duration": 7200.0,
"maximum_bucket": 50,
"last_calculated": "2024-07-10T23:55:00.847141",
"last_updated": "2024-07-11T00:06:37.868792",
"number_of_data_points": 0
},
{
"id": 1,
"name": "Achtertuin Links",
"size": 50.0,
"throughput": 6.0,
"state": "automatic",
"bucket": -1.3966115997900619,
"old_bucket": 0,
"delta": 0,
"duration": 698,
"module": 2,
"multiplier": 1.0,
"explanation": null,
"mapping": 0,
"lead_time": 0.0,
"maximum_duration": 7200.0,
"maximum_bucket": 50,
"last_calculated": "2024-07-10T23:55:01.279282",
"last_updated": "2024-07-11T00:06:37.868792",
"number_of_data_points": 0
},
{
"id": 2,
"name": "Achtertuin Rechts",
"size": 155.0,
"throughput": 18.0,
"state": "automatic",
"bucket": -1.3966115997900619,
"old_bucket": 0,
"delta": 0,
"duration": 722,
"module": 2,
"multiplier": 1.0,
"explanation": null,
"mapping": 0,
"lead_time": 0.0,
"maximum_duration": 7200.0,
"maximum_bucket": 50,
"last_calculated": "2024-07-10T23:55:01.707422",
"last_updated": "2024-07-11T00:06:37.868792",
"number_of_data_points": 0
}
]
}
}
}
The text was updated successfully, but these errors were encountered: