SEACAS [Documentation] [Wiki]

• Get the sources
• Build instructions
• Configure, Build, and Install SEACAS
• Parallel Build
• Testing
• Exodus
• Trilinos
• SPACK
• Docker
• License
• Contact information
• NOTE: The old imake-based build has been removed.

Get the sources

git clone https://github.com/sandialabs/seacas.git

This will create a directory that will be referred to as seacas in the instructions that follow. You can rename this directory to any other name you desire. Set an environment variable pointing to this location by doing:

cd seacas && export ACCESS=`pwd`

Build instructions

Automatically download and build dependencies (Third-Party Libraries)

There are a few externally developed third-party libraries (TPL) that are required (or optional) to build SEACAS: HDF5, NetCDF, CGNS, MatIO, Kokkos, and (if MPI set) PnetCDF libraries. You can build the libraries using the install-tpl.sh script, or you can install them manually as detailed in TPL-Manual-Install.md.

• To use the script, simply type ./install-tpl.sh
• The default behavior can be modified via a few environment variables:

Variable	Values	Default	Description
INSTALL_PATH	path to install	pwd	Root of install path; default is current location
COMPILER	clang, gnu, intel, ibm	gnu	What compiler should be used for non-parallel build. Must have C++-14 capability.
MPI	YES, NO	NO	If YES, then build parallel capability
FORCE	YES, NO	NO	Force downloading and building even if lib is already installed.
BUILD	YES, NO	YES	Should TPLs be built and installed.
DOWNLOAD	YES, NO	YES	Should TPLs be downloaded.
USE_PROXY	YES, NO	NO	Sandia specific -- use proxy when downloading tar files
DEBUG	YES, NO	NO	Build debug executable; default is optimized
SHARED	YES, NO	YES	Build shared libraries if YES, archive (.a) if NO
CRAY	YES, NO	YES	Is this a Cray system (special parallel options)
NEEDS_ZLIB	YES, NO	NO	If system does not have zlib installed, download and install it (HDF5 compression).
USE_ZLIB_NG	YES, NO	NO	Should the improved zlib-ng library be used to provide ZLIB capability
NEEDS_SZIP	YES, NO	NO	If system does not have szip installed, download and install it (HDF5 compression).
USE_64BIT_INT	YES, NO	NO	In CGNS, enable 64-bit integers
CGNS	YES, NO	YES	Should CGNS TPL be built.
MATIO	YES, NO	YES	Should matio TPL be built.
METIS	YES, NO	NO	Should metis TPL be built (parallel decomposition).
PARMETIS	YES, NO	NO	Should parmetis TPL be built (parallel decomposition).
ADIOS2	YES, NO	NO	Should adios2 TPL be built.
CATALYST2	YES, NO	NO	Should catalyst 2 TPL be built.
KOKKOS	YES, NO	NO	Should Kokkos TPL be built.
GNU_PARALLEL	YES, NO	YES	Should GNU parallel script be built.
FMT	YES, NO	YES	Should Lib::FMT TPL be built.
H5VERSION	V112, V110, V18	V110	Use HDF5-1.12.X, HDF5-1.10.X or HDF5-1.8.X
BB	YES, NO	NO	Enable Burst Buffer support in PnetCDF
JOBS	{count}	2	Number of "jobs" used for simultaneous compiles
SUDO	"" or sudo	""	If need to be superuser to install

• NOTE: The DOWNLOAD and BUILD options can be used to download all TPL source; move to a system with no outside internet access and then build/install the TPLs.
• The arguments can either be set in the environment as: export COMPILER=gnu, or passed on the script invocation line: COMPILER=gnu ./install-tpl.sh

Configure, Build, and Install SEACAS

At this time, you should have all external TPL libraries built and installed into ${ACCESS}/lib and ${ACCESS}/include. You are now ready to configure the SEACAS CMake build.

• cd $ACCESS
• mkdir build
• cd build
• edit the ${ACCESS}cmake-config file and adjust compilers and other settings as needed.
• enter the command ../cmake-config and cmake should configure everything for the build.
• make && make install
• If everything works, your applications should be in ${ACCESS}/bin
• To install in a different location, do INSTALL_PATH={path_to_install} ../cmake-config
• The default behavior can be modified via a few environment variables:

Variable	Values	Default	Description
INSTALL_PATH	path to install	pwd	Root of install path; default is current location
BUILDDIR	{dir}	pwd/build	Directory to do config and build
COMPILER	clang, gnu, intel, ibm	gnu	What compiler should be used for non-parallel build
SHARED	YES, NO	YES	Build and use shared libraries is YES
APPLICATIONS	YES, NO	YES	Should all SEACAS applications be built (see cmake-config)
LEGACY	YES, NO	YES	Should the legacy SEACAS applications be built (see cmake-config)
FORTRAN	YES, NO	YES	Should fortran libraries and applications be built (see cmake-config)
ZOLTAN	YES, NO	YES	Should zoltan library and nem_slice be built
BUILD_TYPE	debug, release	release	what type of build
DEBUG	-none-		If specified, then do a debug build. Can't be used with BUILD_TYPE
HAVE_X11	YES, NO	YES	Does the system have X11 libraries and include files; used for blot, fastq
THREADSAFE	YES, NO	NO	Compile a thread-safe IOSS and Exodus library
USE_SRUN	YES, NO	NO	If MPI enabled, then use srun instead of mpiexec to run parallel tests
DOXYGEN	YES, NO	NO	Run doxygen on several packages during build to generate documentation
OMIT_DEPRECATED	YES, NO	NO	Should the deprecated code be omitted; NO will enable deprecated code
EXTRA_WARNINGS	YES, NO	NO	Build with extra warnings enabled; see list in cmake-config
SANITIZER	many	NO	If not NO, build using specified sanitizer; see list in cmake-config
GENERATOR	many	"Unix Makefiles"	what generator should CMake use; see cmake doc

• The arguments can either be set in the environment as: export COMPILER=gnu, or passed on the script invocation line: COMPILER=gnu ./install-tpl.sh

Parallel Build

For some areas of use, a parallel version of SEACAS is required. This will build a "parallel-aware" version of the exodus library and a parallel version of the Ioss library.

The only modification to the serial build described above is to make sure that the mpicc parallel C compiler is in your path and to add the MPI=YES argument to the install-tpl.sh script invocation when building the TPLs. For example:

   MPI=YES ./install-tpl.sh

This will download all requested libraries and build them with parallel capability enabled (if applicable). You can then continue with the steps outlined in the previous section.

Testing

There are a few unit tests for zoltan, exodus, ioss, and aprepro that can be run via make test or ctest if you configured with -D Seacas_ENABLE_TESTS=YES.

There is also a system-level test that just verifies that the applications can read and write exodus files correctly. This test runs off of the installed applications. To run do:

• make install
• cd ../SEACAS-Test
• make clean; make

This will run through several of the SEACAS applications creating a mesh (exodus file) and then performing various manipulations on the mesh. If the test runs successfully, there is some hope that everything has built and is running correctly.

Exodus

If you only want the exodus library, then follow most of the above instructions with the following exceptions:

• Clone entire source tree as above. (There used to be a zip file, but difficult to keep up-to-date)
• You only need the netcdf and optionally hdf5 libraries
• Use the cmake-exodus file instead of cmake-config.
• This will build, by default, a shared exodus library and also install the exodus.py and exomerge.py Python interfaces.

Trilinos

Although SEACAS is included in Trilinos (https://github.com/trilinos/Trilinos), it is also possible to use the SEACAS code from this repository to override the possibly older SEACAS code in Trilinos. The steps are to directly pull SEACAS from github under Trilinos and then build SEACAS under Trilinos with that version using SEACAS_SOURCE_DIR_OVERRIDE. Here is how you do it:

cd Trilinos/
git clone https://github.com/sandialabs/seacas.git
cd BUILD/
cmake -DSEACAS_SOURCE_DIR_OVERRIDE:STRING=seacas/packages/seacas -DTrilinos_ENABLE_SEACAS [other options] ..

SPACK

The SPACK package manager (https://spack.io/) can be used to install SEACAS and all dependent third-party libraries. SEACAS is a supported package in SPACK as of December 2018.

git clone https://github.com/spack/spack.git
. spack/share/spack/setup-env.sh
spack install seacas~mpi   # Serial build (most common)

Docker

An Ubuntu-based Docker image, with SEACAS built and installed, is available on Docker Hub.

docker pull mrbuche/seacas

SEACAS is located in /seacas when running the container. There is also a similar image available on Docker Hub with only Exodus built and installed.

docker pull mrbuche/exodus

License

SEACAS is licensed under the Modified BSD License. See the LICENSE file for details.

The following externally-developed software routines are used in some of the SEACAS applications and are under a separate license:

Routine	Where Used	License
getline	packages/seacas/libraries/aprepro_lib/apr_getline_int.c	MIT
getline	packages/seacas/libraries/suplib_c/getline.c	BSD
GetLongOpt	packages/seacas/libraries/suplib_cpp/GetLongOpt.C	public domain
adler hash	packages/seacas/libraries/suplib_c/adler.c	zlib
MurmurHash	packages/seacas/libraries/ioss/src/Ioss_FaceGenerator.C	public domain
json include file	packages/seacas/libraries/ioss/src/visualization/	MIT
terminal_color	packages/seacas/libraries/aprepro_lib	zlib
Tessil Hash	packages/seacas/libraries/ioss/src/hash	MIT
doctest	packages/seacas/libraries/ioss/src/doctest.h	MIT
pdqsort	packages/seacas/libraries/ioss/src	Zlib License

Contact information

Greg Sjaardema (gsjaardema@gmail.com, gdsjaar@sandia.gov)