An interactive shell for SD/MMC access via Linux spidev devices.
Display commands.
sdmmc/spi> ?
? Display commands
session? Display session parameters
verbose Be verbose (default)
quiet Be quiet
bye Leave sdmmc/spi
clock FREQUENCY Set SPI clock frequency
open FILENAME Open SPI device
close Close SPI device
cmd0 Go to Idle State
cmd1 Send Operating Condition
cmd6 FUNCTION Check/Switch Function
cmd8 CONDITION Send Interface Condition
cmd9 Read CSD Register
cmd10 Read CID Register
cmd16 LENGTH Set Block Length
cmd17 ADDRESS Read Single Block
cmd58 Read Operating Condition
acmd41 CONDITION Send Operating Condition
fault tolerant Pad and skip block on error
fault intolerant Abort on block error
retry COUNT Set block retry count
push FILE BLOCK Push blocks to card
pull BLOCK COUNT FILE Pull blocks from card
Display session parameters.
$ ./sdmmcspi
sdmmc/spi> session?
Device (null)
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x00
High Capacity? No
Dump received and transmitted data, with supplementary field annotation where available, to standard output.
Display errors only.
Exit the shell.
Set the maximum SPI transmission frequency.
sdmmc/spi> clock 800000
sdmmc/spi> session?
Device /dev/spidev0.0
Clock Frequency 800000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x00
High Capacity? No
Open an SPI device.
sdmmc/spi> open /dev/spidev0.0
sdmmc/spi> session?
Device /dev/spidev0.0
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x00
High Capacity? No
Close the SPI device.
sdmmc/spi> close
sdmmc/spi> session?
Device (null)
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x00
High Capacity? No
Go to Idle State.
sdmmc/spi> cmd0
TX
00000000: ff40 0000 0000 95 .@.....
Command Type 0x00 (Go to Idle State)
Command Data 0x00000000
Command Checksum 0x4a
RX
00000000: 01 .
Card State 0x01 (Idle)
Send Operating Condition, until the card enters the Ready state.
sdmmc/spi> cmd1
TX
00000000: ff41 0000 0000 f9 .A.....
Command Type 0x01 (Send Operating Condition)
Command Data 0x00000000
Command Checksum 0x7c
RX
00000000: 01
Card State 0x01 (Idle)
TX
00000000: ff41 0000 0000 f9 .A.....
Command Type 0x01 (Send Operating Condition)
Command Data 0x00000000
Command Checksum 0x7c
RX
00000000: 00
Card State 0x00 (Ready)
Check or Switch Card Function.
Response decoding for cmd6 is not implemented yet.
sdmmc/spi> cmd6 0x00000000
TX
00000000: ff46 0000 0000 ef .F.....
Command Type 0x06 (Check / Switch Card Function)
Command Data 0x00000000
Command Checksum 0x77
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: fe00 6480 0180 0180 0180 01c0 0180 0100 ..d.............
00000010: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000020: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000030: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000040: 0002 5d ..]
Token 0xfe (Block Start)
Checksum (received) 0x025d
Checksum (calculated) 0x025d
Send Interface Condition
dmmc/spi> cmd8 0x01cd
TX
00000000: ff48 0000 01cd 55 .H....U
Command Type 0x08 (Send Interface Condition)
Command Data 0x000001cd
Command Checksum 0x2a
RX
00000000: 01 .
Card State 0x01 (Idle)
RX
00000000: 0000 01cd ....
Voltage Accepted 0x01 (2.7V - 3.6V)
Check Pattern 0xcd
Read CSD Register
sdmmc/spi> cmd9
TX
00000000: ff49 0000 0000 af .I.....
Command Type 0x09 (Read CSD Register)
Command Data 0x00000000
Command Checksum 0x57
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: fe00 2600 325f 5a83 aefe fbcf ff92 8040 ..&.2_Z........@
00000010: df9f c5 ...
Token 0xfe (Block Start)
Checksum (received) 0x9fc5
Checksum (calculated) 0x9fc5
CSD Version 1.0
TAAC 0x26
NSAC 0x00
Maximum Transfer Rate 0x32
Command Classes 0x05f5
Maximum Read Block Length 0x0a
Partial Block Reads? 0x01 (Yes)
Write Block Misalignment? 0x00 (No)
Read Block Misalignment? 0x00 (No)
DSR Implemented 0x00
Device Size 0x0ebb
Max Read Current @ min(Vdd) 0x07
Max Read Current @ max(Vdd) 0x06
Max Write Current @ min(Vdd) 0x07
Max Write Current @ max(Vdd) 0x06
Device Size Multiplier 0x07
Erase Block Enabled? 0x01 (Yes)
Erase Sector Size 0x1f
Write Protect Group Size 0x7f
Write Protect Group Enabled? 0x01 (Yes)
Write Speed Factor 0x04
Max Write Block Length 0x0a
Partial Block Writes? 0x00 (No)
File Format Group 0x00
Copy? 0x01 (Yes)
Permanent Write Protection? 0x00 (No)
Temporary Write Protection? 0x00 (No)
File Format 0x00
CSD Checksum 0x6f
sdmmc/spi> cmd9
TX
00000000: ff49 0000 0000 af .I.....
Command Type 0x09 (Read CSD Register)
Command Data 0x00000000
Command Checksum 0x57
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: fe40 0e00 325b 5900 0076 b27f 800a 4040 .@..2[Y..v....@@
00000010: 1309 93 ...
Token 0xfe (Block Start)
Checksum (received) 0x0993
Checksum (calculated) 0x0993
CSD Version 2.0
TAAC 0x0e
NSAC 0x00
Maximum Transfer Rate 0x32
Command Classes 0x05b5
Maximum Read Block Length 0x09
Partial Block Reads? 0x00 (No)
Write Block Misalignment? 0x00 (No)
Read Block Misalignment? 0x00 (No)
DSR Implemented 0x00
Device Size (Block Count) 0x000076b2
Erase Block Enabled? 0x01 (Yes)
Erase Sector Size 0x7f
Write Protect Group Size 0x00
Write Protect Group Enabled? 0x00 (No)
Write Speed Factor 0x02
Max Write Block Length 0x09
Partial Block Writes? 0x00 (No)
File Format Group 0x00
Copy? 0x01 (Yes)
Permanent Write Protection? 0x00 (No)
Temporary Write Protection? 0x00 (No)
File Format 0x00
CSD Checksum 0x00
Read CID Register
sdmmc/spi> cmd10
TX
00000000: ff4a 0000 0000 1b .J.....
Command Type 0x0a (Read CID Register)
Command Data 0x00000000
Command Checksum 0x0d
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: fe03 5344 5342 3136 4780 db0d d8a8 014b ..SDSB16G......K
00000010: b144 c7 .D.
Token 0xfe (Block Start)
Checksum (received) 0x44c7
Checksum (calculated) 0x44c7
Manufacturer 0x03
OEM/Application SD
Product SB16G
Revision 8.0
Serial Number 0xdb0dd8a8
Reserved 0x00
Manufactured 2020/11
Checksum 0x58
Set Block Length
sdmmc/spi> cmd16 512
TX
00000000: ff50 0000 0200 15 .P.....
Command Type 0x10 (Set Block Length)
Command Data 0x00000200
Command Checksum 0x0a
RX
00000000: 00 .
Card State 0x00 (Ready)
Read Single Block.
For standard capacity cards, address is a byte-offset and is typically provided as a multiple of block length. For high capacity cards, address is expected to be provided as a block-offset.
sdmmc/spi> cmd17 0
TX
00000000: ff51 0000 0000 55 .Q....U
Command Type 0x11 (Read Single Block)
Command Data 0x00000000
Command Checksum 0x2a
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: feeb 6390 0000 0000 0000 0000 0000 0000 ..c.............
00000010: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000020: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000030: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000040: 0000 0000 0000 0000 0000 0000 0000 0000 ................
00000050: 0000 0000 0000 0000 0000 0000 8001 0000 ................
00000060: 0000 0000 00ff fa90 90f6 c280 7405 f6c2 ............t...
00000070: 7074 02b2 80ea 797c 0000 31c0 8ed8 8ed0 pt....y|..1.....
00000080: bc00 20fb a064 7c3c ff74 0288 c252 be80 .. ..d|<.t...R..
00000090: 7de8 1701 be05 7cb4 41bb aa55 cd13 5a52 }.....|.A..U..ZR
000000a0: 723d 81fb 55aa 7537 83e1 0174 3231 c089 r=..U.u7...t21..
000000b0: 4404 4088 44ff 8944 02c7 0410 0066 8b1e D.@.D..D.....f..
000000c0: 5c7c 6689 5c08 668b 1e60 7c66 895c 0cc7 \|f.\.f..`|f.\..
000000d0: 4406 0070 b442 cd13 7205 bb00 70eb 76b4 D..p.B..r...p.v.
000000e0: 08cd 1373 0d5a 84d2 0f83 d800 be8b 7de9 ...s.Z........}.
000000f0: 8200 660f b6c6 8864 ff40 6689 4404 0fb6 ..f....d.@f.D...
00000100: d1c1 e202 88e8 88f4 4089 4408 0fb6 c2c0 ........@.D.....
00000110: e802 6689 0466 a160 7c66 09c0 754e 66a1 ..f..f.`|f..uNf.
00000120: 5c7c 6631 d266 f734 88d1 31d2 66f7 7404 \|f1.f.4..1.f.t.
00000130: 3b44 087d 37fe c188 c530 c0c1 e802 08c1 ;D.}7....0......
00000140: 88d0 5a88 c6bb 0070 8ec3 31db b801 02cd ..Z....p..1.....
00000150: 1372 1e8c c360 1eb9 0001 8edb 31f6 bf00 .r...`......1...
00000160: 808e c6fc f3a5 1f61 ff26 5a7c be86 7deb .......a.&Z|..}.
00000170: 03be 957d e834 00be 9a7d e82e 00cd 18eb ...}.4...}......
00000180: fe47 5255 4220 0047 656f 6d00 4861 7264 .GRUB .Geom.Hard
00000190: 2044 6973 6b00 5265 6164 0020 4572 726f Disk.Read. Erro
000001a0: 720d 0a00 bb01 00b4 0ecd 10ac 3c00 75f4 r...........<.u.
000001b0: c300 0000 0000 0000 0000 0000 0000 0080 ................
000001c0: 2021 0083 2edf 4f00 0800 0000 a8ca 0100 !....O.........
000001d0: 0081 c005 03d0 2f00 b0ca 0100 1c10 0000 ....../.........
000001e0: 0000 0000 0000 0000 0000 0000 0000 0000 ................
000001f0: 0000 0000 0000 0000 0000 0000 0000 0055 ...............U
00000200: aad6 0c ...
Token 0xfe (Block Start)
Checksum (received) 0xd60c
Checksum (calculated) 0xd60c
Read Operating Condition.
The High Capacity? session flag is set according to the CCS bit in the OCR register.
sdmmc/spi> cmd58
TX
00000000: ff7a 0000 0000 fd .z.....
Command Type 0x3a (Read Operating Condition)
Command Data 0x00000000
Command Checksum 0x7e
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: c0ff 8000 ....
OCR 0x80000000 (Busy)
0x40000000 (High Capacity)
0x00800000 (3.5V - 3.6V OK)
0x00400000 (3.4V - 3.5V OK)
0x00200000 (3.3V - 3.4V OK)
0x00100000 (3.2V - 3.3V OK)
0x00080000 (3.1V - 3.2V OK)
0x00040000 (3.0V - 3.1V OK)
0x00020000 (2.9V - 3.0V OK)
0x00010000 (2.8V - 2.9V OK)
0x00008000 (2.7V - 2.8V OK)
sdmmc/spi> session?
Device /dev/spidev0.0
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x05
High Capacity? Yes
Send Operating Condition, until card enters Ready state.
sdmmc/spi> acmd41 0x40000000
TX
00000000: ff77 0000 0000 65 .w....e
Command Type 0x37 (Begin Application Specific Command)
Command Data 0x00000000
Command Checksum 0x32
RX
00000000: c1 .
Card State 0xc1 (Unknown)
TX
00000000: ff69 4000 0000 77 .i@...w
Command Type 0x29 (Send Operating Condition)
Command Data 0x40000000
Command Checksum 0x3b
RX
00000000: 05 .
Card State 0x05 (Unknown)
TX
00000000: ff77 0000 0000 65 .w....e
Command Type 0x37 (Begin Application Specific Command)
Command Data 0x00000000
Command Checksum 0x32
RX
00000000: 01 .
Card State 0x01 (Idle)
TX
00000000: ff69 4000 0000 77 .i@...w
Command Type 0x29 (Send Operating Condition)
Command Data 0x40000000
Command Checksum 0x3b
RX
00000000: 01 .
Card State 0x01 (Idle)
TX
00000000: ff77 0000 0000 65 .w....e
Command Type 0x37 (Begin Application Specific Command)
Command Data 0x00000000
Command Checksum 0x32
RX
00000000: 01 .
Card State 0x01 (Idle)
TX
00000000: ff69 4000 0000 77 .i@...w
Command Type 0x29 (Send Operating Condition)
Command Data 0x40000000
Command Checksum 0x3b
RX
00000000: 00 .
Card State 0x00 (Ready)
Pad, with a block of NUL bytes, and skip block on push/pull error.
sdmmc/spi> fault tolerant
sdmmc/spi> session?
Device /dev/spidev0.0
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? Yes
Retry Count 0x00
High Capacity? Yes
Abort push/pull on block error.
sdmmc/spi> fault intolerant
sdmmc/spi> session?
Device /dev/spidev0.0
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x00
High Capacity? Yes
Set block retry count for push/pull errors.
sdmmc/spi> retry 5
sdmmc/spi> session?
Device /dev/spidev0.0
Clock Frequency 16000000Hz
Poll Interval 1000ms
Fault Tolerant? No
Retry Count 0x05
High Capacity? Yes
Push blocks to card.
$ for i in $(seq 1 512); do echo -n "A"; done > /tmp/blocks
$ for i in $(seq 1 512); do echo -n "B"; done >> /tmp/blocks
sdmmc/spi> quiet
sdmmc/spi> push /tmp/blocks 1024
Pushed 2 of 2 block(s) in +-1s
sdmmc/spi> verbose
sdmmc/spi> push /tmp/blocks 1024
TX
00000000: ff58 0000 0400 37 .X....7
Command Type 0x18 (Unknown)
Command Data 0x00000400
Command Checksum 0x1b
RX
00000000: 00 .
Card State 0x00 (Ready)
TX
00000000: fe41 4141 4141 4141 4141 4141 4141 4141 .AAAAAAAAAAAAAAA
00000010: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000020: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000030: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000040: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000050: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000060: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000070: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000080: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000090: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000a0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000b0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000c0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000d0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000e0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000f0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000100: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000110: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000120: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000130: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000140: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000150: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000160: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000170: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000180: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000190: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001a0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001b0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001c0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001d0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001e0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001f0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000200: 41 A
Token 0xfe (Block Start)
RX
00000000: e5 .
Write Status 0x02 (Accepted)
RX
00000000: 00 .
RX
00000000: 03 .
TX
00000000: ff58 0000 0401 25 .X....%
Command Type 0x18 (Unknown)
Command Data 0x00000401
Command Checksum 0x12
RX
00000000: 00 .
Card State 0x00 (Ready)
TX
00000000: fe42 4242 4242 4242 4242 4242 4242 4242 .BBBBBBBBBBBBBBB
00000010: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000020: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000030: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000040: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000050: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000060: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000070: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000080: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000090: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000a0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000b0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000c0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000d0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000e0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000f0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000100: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000110: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000120: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000130: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000140: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000150: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000160: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000170: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000180: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000190: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001a0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001b0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001c0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001d0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001e0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001f0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000200: 42 B
Token 0xfe (Block Start)
RX
00000000: e5 .
Write Status 0x02 (Accepted)
RX
00000000: 00 .
RX
00000000: 03 .
Pushed 2 of 2 block(s) in +-2s
Pull blocks from card.
sdmmc/spi> quiet
sdmmc/spi> pull 0 128 /tmp/blocks
Pulled 128 of 128 block(s) in +-2s
sdmmc/spi> pull 0 2 /tmp/blocks
TX
00000000: ff51 0000 0000 55 .Q....U
Command Type 0x11 (Read Single Block)
Command Data 0x00000000
Command Checksum 0x2a
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: fe41 4141 4141 4141 4141 4141 4141 4141 .AAAAAAAAAAAAAAA
00000010: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000020: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000030: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000040: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000050: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000060: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000070: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000080: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000090: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000a0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000b0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000c0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000d0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000e0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000000f0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000100: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000110: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000120: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000130: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000140: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000150: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000160: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000170: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000180: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000190: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001a0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001b0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001c0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001d0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001e0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
000001f0: 4141 4141 4141 4141 4141 4141 4141 4141 AAAAAAAAAAAAAAAA
00000200: 41bf 75 A.u
Token 0xfe (Block Start)
Checksum (received) 0xbf75
Checksum (calculated) 0xbf75
TX
00000000: ff51 0000 0001 47 .Q....G
Command Type 0x11 (Read Single Block)
Command Data 0x00000001
Command Checksum 0x23
RX
00000000: 00 .
Card State 0x00 (Ready)
RX
00000000: fe42 4242 4242 4242 4242 4242 4242 4242 .BBBBBBBBBBBBBBB
00000010: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000020: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000030: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000040: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000050: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000060: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000070: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000080: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000090: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000a0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000b0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000c0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000d0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000e0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000000f0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000100: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000110: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000120: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000130: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000140: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000150: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000160: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000170: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000180: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000190: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001a0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001b0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001c0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001d0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001e0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
000001f0: 4242 4242 4242 4242 4242 4242 4242 4242 BBBBBBBBBBBBBBBB
00000200: 428b a6 B..
Token 0xfe (Block Start)
Checksum (received) 0x8ba6
Checksum (calculated) 0x8ba6
Pulled 2 of 2 block(s) in +-1s
sdmmc/spi> fault tolerant
sdmmc/spi> retry 5
sdmmc/spi> quiet
sdmmc/spi> pull 0 6160 /tmp/blocks
Bad Block: 6144
Bad Block: 6145
Bad Block: 6146
Bad Block: 6147
Bad Block: 6148
Bad Block: 6149
Bad Block: 6150
Bad Block: 6151
Bad Block: 6152
Bad Block: 6153
Bad Block: 6154
Bad Block: 6155
Bad Block: 6156
Bad Block: 6157
Bad Block: 6158
Bad Block: 6159
Pulled 6160 of 6160 block(s) in +-33s
sdmmc/spi> fault intolerant
sdmmc/spi> retry 5
sdmmc/spi> quiet
sdmmc/spi> pull 0 6160 /tmp/blocks
Bad Block: 6144
Pulled 6143 of 6160 block(s) in +-33s
sdmmc/spi> cmd0
sdmmc/spi> cmd8 0x01cd
sdmmc/spi> cmd58
sdmmc/spi> acmd41 0x40000000
sdmmc/spi> cmd58
sdmmc/spi> cmd0
sdmmc/spi> cmd8 0x1cd
sdmmc/spi> cmd58
sdmmc/spi> cmd1
sdmmc/spi> cmd58
-
cmd0
may need to be invoked multiple times before the card enters the Ready state. -
Poll Interval, displayed in the response of the
session?
command, is an approximate delay period between each request generated by thecmd1
andacmd41
commands until the card enters the Ready state. -
The card capacity indicated in the
cmd58
response affects how blocks are addressed forpush
andpull
commands. Keep this in mind if you are working with both Standard and High Capacity cards in the same session. -
SIGINT (Ctrl+C) can be used to interrupt the
push
andpull
commands. This will terminate the command once the current block en transit has been processed.
- SD Physical Layer Specification Version 2.00