Installing SubGhz Beta
Here is the procedure for installing the SubGhz Beta
- Update the V3 or V4 AP to the latest release.
- Change the update Repo to "skiphansen/OpenEPaperLink"
- Update the ESP-S2.
- Download the beta version OpenEPaperLink_esp32_C6.bin from https://github.com/skiphansen/OpenEPaperLink/releases and save it to the root of the AP.
- Deselect the "download latest version" option on the update page.
- Update the C6.
- Navigate to the AP settings page.
- REFRESH the page.
- Navigate back to the AP settings page.
- Verify that the SubGhz channel selection is present.
- You are finished!
Now that the SubGhz beta is installed continue to configure the SubGhz channel.
Make sure to update the C6 with the "download latest version" checked even if your C6 is current.
This downloads the firmware.jason, bootloader.bin and partition-table.bin files which will be needed later.
First delete the standard release OpenEPaperLink_esp32_C6.bin downloaded automagically earlier.
Now download the beta and save it somewhere.
Now that you have it on your PC upload it to the AP.
Deselect the "download latest version" option on the update page and then click the "Update ESP32-C6" button to update the C6 to the beta version.
If everything worked correctly you find the SubGhz channel selection on the settings page.