ntb #4

atulraut · 2018-03-12T03:28:47Z

Adding support to messaging API's to ntb_transport layer

This resolves a bug which may incorrectly configure the peer host's LUT for shared memory window access. The code was using the local host's first BAR number, rather than the peer hosts's first BAR number, to determine what peer NT control register to program. The bug will cause the Switchtec NTB link to work only if both peers have the same first NTB BAR configured. In all other configurations, the link will not come up, failing silently. When both hosts have the same first BAR, the configuration works only because the first BAR numbers happent to be the same. When the hosts do not have the same first BAR, then the LUT translation will not be configured in the correct peer LUT and will not give the peer the shared memory window access required for the link to operate. Signed-off-by: Doug Meyer <dmeyer@gigaio.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Fixes: 678784a ("NTB: switchtec_ntb: Initialize hardware for memory windows") Signed-off-by: Jon Mason <jdmason@kudzu.us>

There is a common methods signature form used over all the NTB API like functions naming scheme, arguments names and order, etc. Recently added NTB messaging API IO callbacks were named a bit different so should be renamed to be in compliance with the rest of the API. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

The dma_mask and dma_coherent_mask fields of the NTB struct device weren't initialized in hardware drivers. In fact it should be done instead of PCIe interface usage, since NTB clients are supposed to use NTB API and left unaware of real hardware implementation. In addition to that ntb_device_register() method shouldn't clear the passed ntb_dev structure, since it dma_mask is initialized by hardware drivers. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Simple (1 << pidx) operation causes undefined behaviour when pidx >= 32. It must be casted to u64 to match the actual return value of ntb_link_is_up() method, so to have all the possible peer indexes covered and to get rid of undefined behaviour. Additionally there are special macros in "linux/bitops.h" to perform the bit-set-shift operations, so it's recommended to have them used for proper bit setting. Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>

Current Ping Pong driver can't truly work with multi-port devices. Additionally it requires the Scratchpad registers being available on NTB device. This patches rewrites the driver so one would perform the cyclic Ping-Pong algorithm around all the available NTB peers and makes it working with NTB hardware, which doesn't support Scratchpads, but such alternative as NTB Message register. Additional cleanups are also added here. Changelog v1: - Add Multi-port API support - Use NTB Message registers if available - Ping-pong now works like cyclic ping around all the peers Changelog v2: - Remove driver Author/Description/Version macros Changelog v3: - Remove contacts from the driver header - Discard spin_lock/unlocks around debug prints - Print error if neither Msg and Spads available Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Former NTB Debugging tool driver supported only the limited functionality of the recently updated NTB API, which is now available to work with the truly NTB multi-port devices and devices, which got NTB Message registers instead of Scratchpads. This patch fully rewrites the driver so one would fully expose all the new NTB API interfaces. Particularly it concerns the Message registers, peer ports API, NTB link settings. Additional cleanups are also added here. Changelog v1: - Alter interface in compliance with multi-port API - Move Message/MW/Port/Link settings to a specific directory Changelog v2: - Remove driver Author/Description/License macros - Return error if ntb_mw_get_align called while link is down - Add db_valid_mask DebugFS file - Add msg_inbits/msg_outbits DebugFS files Changelog v3: - Remove contacts info from the driver header - Add descriptive comments for the MW-related structures - Replace on-stack bufs sizes with macro Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Former NTB Performance driver could only work with NTB devices, which got Scratchpads available and had just two ports. Since there are devices, which don't have Scratchpads and got more than two peer ports, the performance measuring tool needs to be rewritten. This patch adds the ability to test any available NTB peer. Additionally it allows to set NTB memory windows up using any available data exchange interface: Scratchpad or Message registers. Some cleanups are also added here. Changelog v1: - Alter interface in compliance with multi-port API - Create Scratchpads and Message compliant NTB link init process - Limit DebugFS access methods to prevent the driver failure Changelog v2: - Remove driver Author/Description/License macros - Replace magic numbers with macros - Fix global index calc error for devices with highest port index - Fix invalid scratchpad selection in send_msg algorithm - Fix bytes order translation in message recv method - Use local global index to select an inbound MW - Add commands send/recv/exec debug prints - Call ntb_mw_get_align when link is supposed to be up Changelog v3: - Remove contacts info from the driver header - Add perf_cmd_recv return value comment - Replace DebugFS buf size with macro Changelog v4: - Fix "try" variable uninitialized usage in perf_copy_chunk() Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

If some of variables like LOC/REM or LOCAL_*/REMOTE_* got whitespaces, the script may fail with syntax error. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Multi-port interface is now available in ntb_tool driver. According to the new NTB API, there might be more than two devices connected over NTB. It means each device can have multiple freely enumerated ports. Each port got index assigned by NTB hardware driver. This test is performed to determine the local and peer ports as well as their indexes. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Link Up and Down methods are used to change NTB link settings on local side only for multi-port devices. Link is considered up only if both sides local and peer set it up. Intel/AMD hardware acts a bit different by assigning the Primary and Secondary roles, so Primary device only is able to change the link state. Such behaviour should be reflected in the test code. Changelog v3: - Redirect errors to /dev/null insteda of /dev/nulle Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

DB interface of ntb_tool driver hasn't been changed much, but db_valid_mask DebugFS file has still been added. In this case it's much better to test all valid DB bits instead of using the predefined mask, which may be incorrect in general. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Scratchpad NTB API has changed so has the ntb_tool driver. Outbound Scratchpad DebugFS files have been moved to peer specific directories. Each scratchpad is now available via separate file. The test code has been accordingly altered. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Messages NTB API is now available. ntb_tool driver has been altered to perform messages send and receive operation. The test of messages read/write to/from peer device has been added to the script. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

There are devices (like IDT PCIe switches), which outbound MWs xlat address is setup on peer side. In this case local side is supposed to allocate a memory buffer and somehow deliver the xlat DMA address to peer so one could set the outbound MW up. The MW test is altered so to support both previous Intel/AMD and new IDT-like devices. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

ntb_perf driver has been also updated so to have the multi-port interface support. User now must specify what peer port is going to be used to perform the test. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Since Switchtec patch there has been a new topology added to the NTB API. It's called NTB_TOPO_SWITCH and dedicated for PCIe switch chips. Even though topo field isn't used within the IDT driver much, lets set it for the sake of unification. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

Shakeel reported a crash in mem_cgroup_protected(), which can be triggered by memcg reclaim if the legacy cgroup v1 use_hierarchy=0 mode is used: BUG: unable to handle kernel NULL pointer dereference at 0000000000000120 PGD 8000001ff55da067 P4D 8000001ff55da067 PUD 1fdc7df067 PMD 0 Oops: 0000 [#4] SMP PTI CPU: 0 PID: 15581 Comm: bash Tainted: G D 4.17.0-smp-clean #5 Hardware name: ... RIP: 0010:mem_cgroup_protected+0x54/0x130 Code: 4c 8b 8e 00 01 00 00 4c 8b 86 08 01 00 00 48 8d 8a 08 ff ff ff 48 85 d2 ba 00 00 00 00 48 0f 44 ca 48 39 c8 0f 84 cf 00 00 00 <48> 8b 81 20 01 00 00 4d 89 ca 4c 39 c8 4c 0f 46 d0 4d 85 d2 74 05 RSP: 0000:ffffabe64dfafa58 EFLAGS: 00010286 RAX: ffff9fb6ff03d000 RBX: ffff9fb6f5b1b000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9fb6f5b1b000 RDI: ffff9fb6f5b1b000 RBP: ffffabe64dfafb08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000c800 R12: ffffabe64dfafb88 R13: ffff9fb6f5b1b000 R14: ffffabe64dfafb88 R15: ffff9fb77fffe000 FS: 00007fed1f8ac700(0000) GS:ffff9fb6ff400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000120 CR3: 0000001fdcf86003 CR4: 00000000001606f0 Call Trace: ? shrink_node+0x194/0x510 do_try_to_free_pages+0xfd/0x390 try_to_free_mem_cgroup_pages+0x123/0x210 try_charge+0x19e/0x700 mem_cgroup_try_charge+0x10b/0x1a0 wp_page_copy+0x134/0x5b0 do_wp_page+0x90/0x460 __handle_mm_fault+0x8e3/0xf30 handle_mm_fault+0xfe/0x220 __do_page_fault+0x262/0x500 do_page_fault+0x28/0xd0 ? page_fault+0x8/0x30 page_fault+0x1e/0x30 RIP: 0033:0x485b72 The problem happens because parent_mem_cgroup() returns a NULL pointer, which is dereferenced later without a check. As cgroup v1 has no memory guarantee support, let's make mem_cgroup_protected() immediately return MEMCG_PROT_NONE, if the given cgroup has no parent (non-hierarchical mode is used). Link: http://lkml.kernel.org/r/20180611175418.7007-2-guro@fb.com Fixes: bf8d5d5 ("memcg: introduce memory.min") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Shakeel Butt <shakeelb@google.com> Tested-by: Shakeel Butt <shakeelb@google.com> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ido Schimmel says: ==================== mlxsw: Enable minimum shaper on MC TCs Petr says: An MC-aware mode was introduced in commit 7b81953 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports"). In MC-aware mode, BUM traffic gets a special treatment by being assigned to a separate set of traffic classes 8..15. Pairs of TCs 0 and 8, 1 and 9, etc., are then configured to strictly prioritize the lower-numbered ones. The intention is to prevent BUM traffic from flooding the switch and push out all UC traffic, which would otherwise happen, and instead give UC traffic precedence. However strictly prioritizing UC traffic has the effect that UC overload pushes out all BUM traffic, such as legitimate ARP queries. These packets are kept in queues for a while, but under sustained UC overload, their lifetime eventually expires and these packets are dropped. That is detrimental to network performance as well. In this patchset, MC TCs (8..15) are configured with minimum shaper of 200Mbps (a minimum permitted value) to allow a trickle of necessary control traffic to get through. First in patch #1, the QEEC register is extended with fields necessary to configure the minimum shaper. In patch #2, minimum shaper is enabled on TCs 8..15. In patches #3 and #4, first the MC-awareness test is tweaked to support the minimum shaper, and then a new test is introduced to test that MC traffic behaves well under UC overload. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…git/vgupta/arc Pull ARC updates from Vineet Gupta: - long due rewrite of do_page_fault - refactoring of entry/exit code to utilize the double load/store instructions - hsdk platform updates * tag 'arc-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Enable AXI DW DMAC in defconfig ARC: [plat-hsdk]: enable DW SPI controller ARC: hide unused function unw_hdr_alloc ARC: [haps] Add Virtio support ARCv2: entry: simplify return to Delay Slot via interrupt ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause ARCv2: entry: rewrite to enable use of double load/stores LDD/STD ARCv2: entry: avoid a branch ARCv2: entry: push out the Z flag unclobber from common EXCEPTION_PROLOGUE ARCv2: entry: comments about hardware auto-save on taken interrupts ARC: mm: do_page_fault refactor #8: release mmap_sem sooner ARC: mm: do_page_fault refactor #7: fold the various error handling ARC: mm: do_page_fault refactor #6: error handlers to use same pattern ARC: mm: do_page_fault refactor #5: scoot no_context to end ARC: mm: do_page_fault refactor #4: consolidate retry related logic ARC: mm: do_page_fault refactor #3: tidyup vma access permission code ARC: mm: do_page_fault refactor #2: remove short lived variable ARC: mm: do_page_fault refactor #1: remove label @good_area

Intel VT-d driver was reworked to use common deferred flushing implementation. Previously there was one global per-cpu flush queue, afterwards - one per domain. Before deferring a flush, the queue should be allocated and initialized. Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush queue. It's probably worth to init it for static or unmanaged domains too, but it may be arguable - I'm leaving it to iommu folks. Prevent queuing an iova flush if the domain doesn't have a queue. The defensive check seems to be worth to keep even if queue would be initialized for all kinds of domains. And is easy backportable. On 4.19.43 stable kernel it has a user-visible effect: previously for devices in si domain there were crashes, on sata devices: BUG: spinlock bad magic on CPU#6, swapper/0/1 lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x45/0x115 intel_unmap+0x107/0x113 intel_unmap_sg+0x6b/0x76 __ata_qc_complete+0x7f/0x103 ata_qc_complete+0x9b/0x26a ata_qc_complete_multiple+0xd0/0xe3 ahci_handle_port_interrupt+0x3ee/0x48a ahci_handle_port_intr+0x73/0xa9 ahci_single_level_irq_intr+0x40/0x60 __handle_irq_event_percpu+0x7f/0x19a handle_irq_event_percpu+0x32/0x72 handle_irq_event+0x38/0x56 handle_edge_irq+0x102/0x121 handle_irq+0x147/0x15c do_IRQ+0x66/0xf2 common_interrupt+0xf/0xf RIP: 0010:__do_softirq+0x8c/0x2df The same for usb devices that use ehci-pci: BUG: spinlock bad magic on CPU#0, swapper/0/1 lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4 Call Trace: <IRQ> dump_stack+0x61/0x7e spin_bug+0x9d/0xa3 do_raw_spin_lock+0x22/0x8e _raw_spin_lock_irqsave+0x32/0x3a queue_iova+0x77/0x145 intel_unmap+0x107/0x113 intel_unmap_page+0xe/0x10 usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d usb_hcd_unmap_urb_for_dma+0x17/0x100 unmap_urb_for_dma+0x22/0x24 __usb_hcd_giveback_urb+0x51/0xc3 usb_giveback_urb_bh+0x97/0xde tasklet_action_common.isra.4+0x5f/0xa1 tasklet_action+0x2d/0x30 __do_softirq+0x138/0x2df irq_exit+0x7d/0x8b smp_apic_timer_interrupt+0x10f/0x151 apic_timer_interrupt+0xf/0x20 </IRQ> RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39 Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Lu Baolu <baolu.lu@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: <stable@vger.kernel.org> # 4.14+ Fixes: 13cf017 ("iommu/vt-d: Make use of iova deferred flushing") Signed-off-by: Dmitry Safonov <dima@arista.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>

Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu> Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu> Signed-off-by: Christoph Hellwig <hch@lst.de>

The base value in do_div() called by hpet_time_div() is truncated from unsigned long to uint32_t, resulting in a divide-by-zero exception. UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2 division by zero CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0 Call Trace: [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline] [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline] [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline] [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline] [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline] [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613 [<ffffffff82846003>] tracesys_phase2+0x90/0x95 The main C reproducer autogenerated by syzkaller, syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); memcpy((void*)0x20000100, "/dev/hpet\000", 10); syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0); syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000); Fix it by using div64_ul(). Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit abbbdf1 ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>

To properly clear the slab on free with slab_want_init_on_free, we walk the list of free objects using get_freepointer/set_freepointer. The value we get from get_freepointer may not be valid. This isn't an issue since an actual value will get written later but this means there's a chance of triggering a bug if we use this value with set_freepointer: kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] PREEMPT PTI CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a #4 RIP: 0010:kfree+0x58a/0x5c0 Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4 RSP: 0000:ffffffff82603d90 EFLAGS: 00010002 RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000 RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320 RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100 R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300 FS: 0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0 Call Trace: apply_wqattrs_prepare+0x154/0x280 apply_workqueue_attrs_locked+0x4e/0xe0 apply_workqueue_attrs+0x36/0x60 alloc_workqueue+0x25a/0x6d0 workqueue_init_early+0x246/0x348 start_kernel+0x3c7/0x7ec x86_64_start_reservations+0x40/0x49 x86_64_start_kernel+0xda/0xe4 secondary_startup_64+0xb6/0xc0 Modules linked in: ---[ end trace f67eb9af4d8d492b ]--- Fix this by ensuring the value we set with set_freepointer is either NULL or another value in the chain. Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Fixes: 6471384 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

apq8016_sbc_parse_of() sets up multiple DAI links, depending on the number of nodes in the device tree. However, at the moment CPU and platform components are only allocated for the first link. This causes an oops when more than one link is defined: Internal error: Oops: 96000044 [#1] SMP CPU: 0 PID: 1015 Comm: kworker/0:2 Not tainted 5.3.0-rc1 #4 Call trace: apq8016_sbc_platform_probe+0x1a8/0x3f0 platform_drv_probe+0x50/0xa0 ... Move the allocation inside the loop to ensure that each link is properly initialized. Fixes: 98b232c ("ASoC: qcom: apq8016_sbc: use modern dai_link style") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20190722130352.95874-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>

When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110, the following crash is seen when writing into the 'preferred_role' sysfs attribute. Unable to handle kernel NULL pointer dereference at virtual address 00000028 pgd = f69149ad [00000028] *pgd=00000000 Internal error: Oops: 5 [#1] THUMB2 Modules linked in: tcpci tcpm CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4 Hardware name: Atmel SAMA5 PC is at tcpm_try_role+0x3a/0x4c [tcpm] LR is at tcpm_try_role+0x15/0x4c [tcpm] pc : [<bf8000e2>] lr : [<bf8000bd>] psr: 60030033 sp : dc1a1e88 ip : c03fb47d fp : 00000000 r10: dc216190 r9 : dc1a1f78 r8 : 00000001 r7 : df4ae044 r6 : dd032e90 r5 : dd1ce340 r4 : df4ae054 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : df4ae044 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment none Control: 50c53c7d Table: 3efec059 DAC: 00000051 Process bash (pid: 1882, stack limit = 0x6a6d4aa5) Stack: (0xdc1a1e88 to 0xdc1a2000) 1e80: dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000 [<bf8000e2>] (tcpm_try_role [tcpm]) from [<c03fb4a7>] (preferred_role_store+0x2b/0x5c) [<c03fb4a7>] (preferred_role_store) from [<c01e1e03>] (kernfs_fop_write+0xa7/0x150) [<c01e1e03>] (kernfs_fop_write) from [<c0194e8b>] (__vfs_write+0x1f/0x104) [<c0194e8b>] (__vfs_write) from [<c01969f7>] (vfs_write+0x6b/0x104) [<c01969f7>] (vfs_write) from [<c0196b9b>] (ksys_write+0x43/0x94) [<c0196b9b>] (ksys_write) from [<c0101001>] (ret_fast_syscall+0x1/0x62) Since commit 96232cb ("usb: typec: tcpm: support get typec and pd config from device properties"), the 'config' pointer in struct tcpc_dev is optional when registering a Type-C port. Since it is optional, we have to check if it is NULL before dereferencing it. Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Fixes: 96232cb ("usb: typec: tcpm: support get typec and pd config from device properties") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/1563979112-22483-1-git-send-email-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

Revert the commit bd293d0. The proper fix has been made available with commit d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d0 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: bd293d0 ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Commit 4fc427e ("ipv6_route_seq_next should increase position index") tried to fix the issue where seq_file pos is not increased if a NULL element is returned with seq_ops->next(). See bug https://bugzilla.kernel.org/show_bug.cgi?id=206283 The commit effectively does: - increase pos for all seq_ops->start() - increase pos for all seq_ops->next() For ipv6_route, increasing pos for all seq_ops->next() is correct. But increasing pos for seq_ops->start() is not correct since pos is used to determine how many items to skip during seq_ops->start(): iter->skip = *pos; seq_ops->start() just fetches the *current* pos item. The item can be skipped only after seq_ops->show() which essentially is the beginning of seq_ops->next(). For example, I have 7 ipv6 route entries, root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=4096 00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001 eth0 fe800000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000001 00000000 00000001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo 00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000003 00000000 80200001 lo fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001 eth0 ff000000000000000000000000000000 08 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000004 00000000 00000001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo 0+1 records in 0+1 records out 1050 bytes (1.0 kB, 1.0 KiB) copied, 0.00707908 s, 148 kB/s root@arch-fb-vm1:~/net-next In the above, I specify buffer size 4096, so all records can be returned to user space with a single trip to the kernel. If I use buffer size 128, since each record size is 149, internally kernel seq_read() will read 149 into its internal buffer and return the data to user space in two read() syscalls. Then user read() syscall will trigger next seq_ops->start(). Since the current implementation increased pos even for seq_ops->start(), it will skip record #2, #4 and #6, assuming the first record is #1. root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=128 00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo 4+1 records in 4+1 records out 600 bytes copied, 0.00127758 s, 470 kB/s To fix the problem, create a fake pos pointer so seq_ops->start() won't actually increase seq_file pos. With this fix, the above `dd` command with `bs=128` will show correct result. Fixes: 4fc427e ("ipv6_route_seq_next should increase position index") Cc: Alexei Starovoitov <ast@kernel.org> Suggested-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the key is already present then free the key used for lookup. Found with: $ perf stat -M IO_Read_BW /bin/true ==1749112==ERROR: LeakSanitizer: detected memory leaks Direct leak of 32 byte(s) in 4 object(s) allocated from: #0 0x7f6f6fa7d7cf in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x55acecd9d7a6 in check_per_pkg util/stat.c:343 #2 0x55acecd9d9c5 in process_counter_values util/stat.c:365 #3 0x55acecd9e0ab in process_counter_maps util/stat.c:421 #4 0x55acecd9e292 in perf_stat_process_counter util/stat.c:443 #5 0x55aceca8553e in read_counters ./tools/perf/builtin-stat.c:470 #6 0x55aceca88fe3 in __run_perf_stat ./tools/perf/builtin-stat.c:1023 #7 0x55aceca89146 in run_perf_stat ./tools/perf/builtin-stat.c:1048 #8 0x55aceca90858 in cmd_stat ./tools/perf/builtin-stat.c:2555 #9 0x55acecc05fa5 in run_builtin ./tools/perf/perf.c:313 #10 0x55acecc064fe in handle_internal_command ./tools/perf/perf.c:365 #11 0x55acecc068bb in run_argv ./tools/perf/perf.c:409 #12 0x55acecc070aa in main ./tools/perf/perf.c:539 Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Vineet Singh <vineet.singh@intel.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Cc: zhengjun.xing@intel.com Link: https://lore.kernel.org/r/20220105061351.120843-24-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Change the cifs filesystem to take account of the changes to fscache's indexing rewrite and reenable caching in cifs. The following changes have been made: (1) The fscache_netfs struct is no more, and there's no need to register the filesystem as a whole. (2) The session cookie is now an fscache_volume cookie, allocated with fscache_acquire_volume(). That takes three parameters: a string representing the "volume" in the index, a string naming the cache to use (or NULL) and a u64 that conveys coherency metadata for the volume. For cifs, I've made it render the volume name string as: "cifs,<ipaddress>,<sharename>" where the sharename has '/' characters replaced with ';'. This probably needs rethinking a bit as the total name could exceed the maximum filename component length. Further, the coherency data is currently just set to 0. It needs something else doing with it - I wonder if it would suffice simply to sum the resource_id, vol_create_time and vol_serial_number or maybe hash them. (3) The fscache_cookie_def is no more and needed information is passed directly to fscache_acquire_cookie(). The cache no longer calls back into the filesystem, but rather metadata changes are indicated at other times. fscache_acquire_cookie() is passed the same keying and coherency information as before. (4) The functions to set/reset cookies are removed and fscache_use_cookie() and fscache_unuse_cookie() are used instead. fscache_use_cookie() is passed a flag to indicate if the cookie is opened for writing. fscache_unuse_cookie() is passed updates for the metadata if we changed it (ie. if the file was opened for writing). These are called when the file is opened or closed. (5) cifs_setattr_*() are made to call fscache_resize() to change the size of the cache object. (6) The functions to read and write data are stubbed out pending a conversion to use netfslib. Changes ======= ver #8: - Abstract cache invalidation into a helper function. - Fix some checkpatch warnings[3]. ver #7: - Removed the accidentally added-back call to get the super cookie in cifs_root_iget(). - Fixed the right call to cifs_fscache_get_super_cookie() to take account of the "-o fsc" mount flag. ver #6: - Moved the change of gfpflags_allow_blocking() to current_is_kswapd() for cifs here. - Fixed one of the error paths in cifs_atomic_open() to jump around the call to use the cookie. - Fixed an additional successful return in the middle of cifs_open() to use the cookie on the way out. - Only get a volume cookie (and thus inode cookies) when "-o fsc" is supplied to mount. ver #5: - Fixed a couple of bits of cookie handling[2]: - The cookie should be released in cifs_evict_inode(), not cifsFileInfo_put_final(). The cookie needs to persist beyond file closure so that writepages will be able to write to it. - fscache_use_cookie() needs to be called in cifs_atomic_open() as it is for cifs_open(). ver #4: - Fixed the use of sizeof with memset. - tcon->vol_create_time is __le64 so doesn't need cpu_to_le64(). ver #3: - Canonicalise the cifs coherency data to make the cache portable. - Set volume coherency data. ver #2: - Use gfpflags_allow_blocking() rather than using flag directly. - Upgraded to -rc4 to allow for upstream changes[1]. - fscache_acquire_volume() now returns errors. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: Steve French <smfrench@gmail.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: linux-cifs@vger.kernel.org cc: linux-cachefs@redhat.com Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=23b55d673d7527b093cd97b7c217c82e70cd1af0 [1] Link: https://lore.kernel.org/r/3419813.1641592362@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/CAH2r5muTanw9pJqzAHd01d9A8keeChkzGsCEH6=0rHutVLAF-A@mail.gmail.com/ [3] Link: https://lore.kernel.org/r/163819671009.215744.11230627184193298714.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906982979.143852.10672081929614953210.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967187187.1823006.247415138444991444.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021579335.640689.2681324337038770579.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/3462849.1641593783@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/1318953.1642024578@warthog.procyon.org.uk/ # v6 Signed-off-by: Steve French <stfrench@microsoft.com>

When cifs_get_root() fails during cifs_smb3_do_mount() we call deactivate_locked_super() which eventually will call delayed_free() which will free the context. In this situation we should not proceed to enter the out: section in cifs_smb3_do_mount() and free the same resources a second time. [Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0 [Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4 [Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019 [Thu Feb 10 12:59:06 2022] Call Trace: [Thu Feb 10 12:59:06 2022] <IRQ> [Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78 [Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117 [Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0 [Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60 [Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0 [Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0 [Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20 [Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140 [Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10 [Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b [Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150 [Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30 [Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0 ... [Thu Feb 10 12:59:07 2022] Freed by task 58179: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30 [Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40 [Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170 [Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20 [Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0 [Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae [Thu Feb 10 12:59:07 2022] Last potentially related work creation: [Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50 [Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0 [Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10 [Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0 [Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs] [Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0 [Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs] [Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs] [Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140 [Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0 [Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210 [Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0 [Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>

I saw the below splatting after the host suspended and resumed. WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm] CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4 RIP: 0010:kvm_resume+0x2c/0x30 [kvm] Call Trace: <TASK> syscore_resume+0x90/0x340 suspend_devices_and_enter+0xaee/0xe90 pm_suspend.cold+0x36b/0x3c2 state_store+0x82/0xf0 kernfs_fop_write_iter+0x1b6/0x260 new_sync_write+0x258/0x370 vfs_write+0x33f/0x510 ksys_write+0xc9/0x160 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae lockdep_is_held() can return -1 when lockdep is disabled which triggers this warning. Let's use lockdep_assert_not_held() which can detect incorrect calls while holding a lock and it also avoids false negatives when lockdep is disabled. Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.17, take #4 - Correctly synchronise PMR and co on PSCI CPU_SUSPEND - Skip tests that depend on GICv3 when the HW isn't available

We've got a mess on our hands. 1. xfs_trans_commit() cannot cancel transactions because the mount is shut down - that causes dirty, aborted, unlogged log items to sit unpinned in memory and potentially get written to disk before the log is shut down. Hence xfs_trans_commit() can only abort transactions when xlog_is_shutdown() is true. 2. xfs_force_shutdown() is used in places to cause the current modification to be aborted via xfs_trans_commit() because it may be impractical or impossible to cancel the transaction directly, and hence xfs_trans_commit() must cancel transactions when xfs_is_shutdown() is true in this situation. But we can't do that because of #1. 3. Log IO errors cause log shutdowns by calling xfs_force_shutdown() to shut down the mount and then the log from log IO completion. 4. xfs_force_shutdown() can result in a log force being issued, which has to wait for log IO completion before it will mark the log as shut down. If #3 races with some other shutdown trigger that runs a log force, we rely on xfs_force_shutdown() silently ignoring #3 and avoiding shutting down the log until the failed log force completes. 5. To ensure #2 always works, we have to ensure that xfs_force_shutdown() does not return until the the log is shut down. But in the case of #4, this will result in a deadlock because the log Io completion will block waiting for a log force to complete which is blocked waiting for log IO to complete.... So the very first thing we have to do here to untangle this mess is dissociate log shutdown triggers from mount shutdowns. We already have xlog_forced_shutdown, which will atomically transistion to the log a shutdown state. Due to internal asserts it cannot be called multiple times, but was done simply because the only place that could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!) and that could only call it once and once only. So the first thing we do is remove the asserts. We then convert all the internal log shutdown triggers to call xlog_force_shutdown() directly instead of xfs_force_shutdown(). This allows the log shutdown triggers to shut down the log without needing to care about mount based shutdown constraints. This means we shut down the log independently of the mount and the mount may not notice this until it's next attempt to read or modify metadata. At that point (e.g. xfs_trans_commit()) it will see that the log is shutdown, error out and shutdown the mount. To ensure that all the unmount behaviours and asserts track correctly as a result of a log shutdown, propagate the shutdown up to the mount if it is not already set. This keeps the mount and log state in sync, and saves a huge amount of hassle where code fails because of a log shutdown but only checks for mount shutdowns and hence ends up doing the wrong thing. Cleaning up that mess is an exercise for another day. This enables us to address the other problems noted above in followup patches. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>

As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The irqchip ops are called with a raw spinlock held, so the subsequent regmap usage cannot use a plain spinlock. spi-hid-apple-of spi0.0: spihid_apple_of_probe:74 ============================= [ BUG: Invalid wait context ] 5.18.0-asahi-00176-g0fa3ab03bdea #1337 Not tainted ----------------------------- kworker/u20:3/86 is trying to lock: ffff8000166b5018 (pinctrl_apple_gpio:462:(&regmap_config)->lock){....}-{3:3}, at: regmap_lock_spinlock+0x18/0x30 other info that might help us debug this: context-{5:5} 7 locks held by kworker/u20:3/86: #0: ffff800017725d48 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670 #1: ffff80001e33bdd0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1c8/0x670 #2: ffff800017d629a0 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c #3: ffff80002414e618 (&ctlr->add_lock){+.+.}-{4:4}, at: spi_add_device+0x40/0x80 #4: ffff800024116990 (&dev->mutex){....}-{4:4}, at: __device_attach+0x30/0x17c #5: ffff800022d4be58 (request_class){+.+.}-{4:4}, at: __setup_irq+0xa8/0x720 #6: ffff800022d4bcc8 (lock_class){....}-{2:2}, at: __setup_irq+0xcc/0x720 Fixes: a0f160f ("pinctrl: add pinctrl/GPIO driver for Apple SoCs") Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20220524142206.18833-1-marcan@marcan.st Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

…_tim The set_tim is supposed to be atomic, but we should download beacon context to firmware with a mutex lock. To avoid warning, do the thing in another work. BUG: scheduling while atomic: swapper/1/0/0x00000700 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W 5.18.0-rc7-00703-g33b5ee09a0c1 #4 Hardware name: Pine64 RK3566 Quartz64-A Board (DT) Call trace: dump_backtrace.part.0+0xc4/0xd0 show_stack+0x14/0x60 dump_stack_lvl+0x60/0x78 dump_stack+0x14/0x2c __schedule_bug+0x5c/0x70 __schedule+0x5c4/0x630 schedule+0x44/0xb0 schedule_preempt_disabled+0xc/0x14 __mutex_lock.constprop.0+0x538/0x56c __mutex_lock_slowpath+0x10/0x20 mutex_lock+0x54/0x60 rtw_ops_set_tim+0x20/0x40 __sta_info_recalc_tim+0x150/0x250 sta_info_recalc_tim+0x10/0x20 invoke_tx_handlers_early+0x4e4/0x5c0 ieee80211_tx+0x78/0x110 ieee80211_xmit+0x94/0xc0 __ieee80211_subif_start_xmit+0x818/0xd20 ieee80211_subif_start_xmit+0x44/0x2d0 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 br_dev_queue_push_xmit+0x94/0x174 br_forward_finish+0x90/0xa0 __br_forward+0xc0/0x13c br_forward+0x108/0x134 br_dev_xmit+0x1cc/0x3a4 dev_hard_start_xmit+0xd0/0x150 __dev_queue_xmit+0x250/0xb30 dev_queue_xmit+0x10/0x20 arp_xmit+0x6c/0x7c arp_send_dst+0x8c/0xc0 arp_solicit+0xd4/0x1e0 neigh_probe+0x58/0xa0 neigh_timer_handler+0x27c/0x380 call_timer_fn.constprop.0+0x20/0x80 __run_timers.part.0+0x230/0x280 run_timer_softirq+0x38/0x70 _stext+0x104/0x278 __irq_exit_rcu+0xa4/0xdc irq_exit_rcu+0xc/0x14 el1_interrupt+0x34/0x50 el1h_64_irq_handler+0x14/0x20 el1h_64_irq+0x64/0x68 arch_cpu_idle+0x14/0x20 do_idle+0x208/0x290 cpu_startup_entry+0x20/0x30 secondary_start_kernel+0x130/0x144 __secondary_switched+0x54/0x58 Fixes: f221796 ("rtw88: Add update beacon flow for AP mode") Reported-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Ondřej Jirman <megi@xff.cz> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220526051251.281905-1-pkshih@realtek.com

Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Fixes: 9558a00 ("NFS: Remove the label from the nfs4_lookup_res struct") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When use 'echo c > /proc/sysrq-trigger' to trigger kdump, riscv_crash_save_regs() will be called to save regs for vmcore, we found "epc" value 00ffffffa5537400 is not a valid kernel virtual address, but is a user virtual address. Other regs(eg, ra, sp, gp...) are correct kernel virtual address. Actually 0x00ffffffb0dd9400 is the user mode PC of 'PID: 113 Comm: sh', which is saved in the task's stack. [ 21.201701] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #45 [ 21.201979] Hardware name: riscv-virtio,qemu (DT) [ 21.202160] epc : 00ffffffa5537400 ra : ffffffff80088640 sp : ff20000010333b90 [ 21.202435] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be7c [ 21.202707] t1 : 0720072007200720 t2 : 30203a7375746174 s0 : ff20000010333cf0 [ 21.202973] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 21.203243] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 28c8f0aeffea4e00 [ 21.203519] a5 : 28c8f0aeffea4e00 a6 : 0000000000000009 a7 : ffffffff8035c9b8 [ 21.203794] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 21.204062] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 21.204331] s8 : 00ffffffef451410 s9 : 0000000000000007 s10: 00aaaaaac0510700 [ 21.204606] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 21.204876] t5 : ff60000001218000 t6 : ff200000103338b8 [ 21.205079] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the incorrect PC, the backtrace showed by crash tool as below, the first stack frame is abnormal, crash> bt PID: 113 TASK: ff60000002269600 CPU: 0 COMMAND: "sh" #0 [ff2000001039bb90] __efistub_.Ldebug_info0 at 00ffffffa5537400 <-- Abnormal #1 [ff2000001039bcf0] panic at ffffffff806578ba #2 [ff2000001039bd50] sysrq_reset_seq_param_set at ffffffff8038c030 #3 [ff2000001039bda0] __handle_sysrq at ffffffff8038c5f8 #4 [ff2000001039be00] write_sysrq_trigger at ffffffff8038cad8 #5 [ff2000001039be20] proc_reg_write at ffffffff801b7edc #6 [ff2000001039be40] vfs_write at ffffffff80152ba6 #7 [ff2000001039be80] ksys_write at ffffffff80152ece #8 [ff2000001039bed0] sys_write at ffffffff80152f46 With the patch, we can get current kernel mode PC, the output as below, [ 17.607658] CPU: 0 PID: 113 Comm: sh Kdump: loaded Not tainted 5.18.9 #42 [ 17.607937] Hardware name: riscv-virtio,qemu (DT) [ 17.608150] epc : ffffffff800078f8 ra : ffffffff8008862c sp : ff20000010333b90 [ 17.608441] gp : ffffffff810dde38 tp : ff6000000226c200 t0 : ffffffff8032be68 [ 17.608741] t1 : 0720072007200720 t2 : 666666666666663c s0 : ff20000010333cf0 [ 17.609025] s1 : 0000000000000000 a0 : ff20000010333b98 a1 : 0000000000000001 [ 17.609320] a2 : 0000000000000010 a3 : 0000000000000000 a4 : 0000000000000000 [ 17.609601] a5 : ff60000001c78000 a6 : 000000000000003c a7 : ffffffff8035c9a4 [ 17.609894] s2 : ffffffff810df0a8 s3 : ffffffff810df718 s4 : ff20000010333b98 [ 17.610186] s5 : 0000000000000000 s6 : 0000000000000007 s7 : ffffffff80c4a468 [ 17.610469] s8 : 00ffffffca281410 s9 : 0000000000000007 s10: 00aaaaaab5bb6700 [ 17.610755] s11: 0000000000000001 t3 : ff60000001218f00 t4 : ff60000001218f00 [ 17.611041] t5 : ff60000001218000 t6 : ff20000010333988 [ 17.611255] status: 0000000200000020 badaddr: 0000000000000000 cause: 0000000000000008 With the correct PC, the backtrace showed by crash tool as below, crash> bt PID: 113 TASK: ff6000000226c200 CPU: 0 COMMAND: "sh" #0 [ff20000010333b90] riscv_crash_save_regs at ffffffff800078f8 <--- Normal #1 [ff20000010333cf0] panic at ffffffff806578c6 #2 [ff20000010333d50] sysrq_reset_seq_param_set at ffffffff8038c03c #3 [ff20000010333da0] __handle_sysrq at ffffffff8038c604 #4 [ff20000010333e00] write_sysrq_trigger at ffffffff8038cae4 #5 [ff20000010333e20] proc_reg_write at ffffffff801b7ee8 #6 [ff20000010333e40] vfs_write at ffffffff80152bb2 #7 [ff20000010333e80] ksys_write at ffffffff80152eda #8 [ff20000010333ed0] sys_write at ffffffff80152f52 Fixes: e53d281 ("RISC-V: Add kdump support") Co-developed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220811074150.3020189-3-xianting.tian@linux.alibaba.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c [ 334.976854] invoke_syscall+0x78/0x100 [ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4 [ 334.985287] do_el0_svc+0x38/0x4c [ 334.988591] el0_svc+0x34/0x10c [ 334.991724] el0t_64_sync_handler+0x11c/0x150 [ 334.996072] el0t_64_sync+0x190/0x194 [ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040) [ 335.005810] ---[ end trace 0000000000000000 ]--- [ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 335.017279] SMP: stopping secondary CPUs [ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000 [ 335.027456] PHYS_OFFSET: 0x80000000 [ 335.030932] CPU features: 0x0000,0085c029,19805c82 [ 335.035713] Memory Limit: none [ 335.038756] Rebooting in 180 seconds.. The fix is to allocate the memory in bond_open() which is guaranteed to be called before any packets are processed. Fixes: 848ca91 ("net: bonding: Use per-cpu rr_tx_counter") CC: Jussi Maki <joamaki@gmail.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When walking through an inode extents, the ext4_ext_binsearch_idx() function assumes that the extent header has been previously validated. However, there are no checks that verify that the number of entries (eh->eh_entries) is non-zero when depth is > 0. And this will lead to problems because the EXT_FIRST_INDEX() and EXT_LAST_INDEX() will return garbage and result in this: [ 135.245946] ------------[ cut here ]------------ [ 135.247579] kernel BUG at fs/ext4/extents.c:2258! [ 135.249045] invalid opcode: 0000 [#1] PREEMPT SMP [ 135.250320] CPU: 2 PID: 238 Comm: tmp118 Not tainted 5.19.0-rc8+ #4 [ 135.252067] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 135.255065] RIP: 0010:ext4_ext_map_blocks+0xc20/0xcb0 [ 135.256475] Code: [ 135.261433] RSP: 0018:ffffc900005939f8 EFLAGS: 00010246 [ 135.262847] RAX: 0000000000000024 RBX: ffffc90000593b70 RCX: 0000000000000023 [ 135.264765] RDX: ffff8880038e5f10 RSI: 0000000000000003 RDI: ffff8880046e922c [ 135.266670] RBP: ffff8880046e9348 R08: 0000000000000001 R09: ffff888002ca580c [ 135.268576] R10: 0000000000002602 R11: 0000000000000000 R12: 0000000000000024 [ 135.270477] R13: 0000000000000000 R14: 0000000000000024 R15: 0000000000000000 [ 135.272394] FS: 00007fdabdc56740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 [ 135.274510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 135.276075] CR2: 00007ffc26bd4f00 CR3: 0000000006261004 CR4: 0000000000170ea0 [ 135.277952] Call Trace: [ 135.278635] <TASK> [ 135.279247] ? preempt_count_add+0x6d/0xa0 [ 135.280358] ? percpu_counter_add_batch+0x55/0xb0 [ 135.281612] ? _raw_read_unlock+0x18/0x30 [ 135.282704] ext4_map_blocks+0x294/0x5a0 [ 135.283745] ? xa_load+0x6f/0xa0 [ 135.284562] ext4_mpage_readpages+0x3d6/0x770 [ 135.285646] read_pages+0x67/0x1d0 [ 135.286492] ? folio_add_lru+0x51/0x80 [ 135.287441] page_cache_ra_unbounded+0x124/0x170 [ 135.288510] filemap_get_pages+0x23d/0x5a0 [ 135.289457] ? path_openat+0xa72/0xdd0 [ 135.290332] filemap_read+0xbf/0x300 [ 135.291158] ? _raw_spin_lock_irqsave+0x17/0x40 [ 135.292192] new_sync_read+0x103/0x170 [ 135.293014] vfs_read+0x15d/0x180 [ 135.293745] ksys_read+0xa1/0xe0 [ 135.294461] do_syscall_64+0x3c/0x80 [ 135.295284] entry_SYSCALL_64_after_hwframe+0x46/0xb0 This patch simply adds an extra check in __ext4_ext_check(), verifying that eh_entries is not 0 when eh_depth is > 0. Link: https://bugzilla.kernel.org/show_bug.cgi?id=215941 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216283 Cc: Baokun Li <libaokun1@huawei.com> Cc: stable@kernel.org Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20220822094235.2690-1-lhenriques@suse.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>

We need to check if we have a OS prefix, otherwise we stumble on a metric segv that I'm now seeing in Arnaldo's tree: $ gdb --args perf stat -M Backend true ... Performance counter stats for 'true': 4,712,355 TOPDOWN.SLOTS # 17.3 % tma_core_bound Program received signal SIGSEGV, Segmentation fault. __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 77 ../sysdeps/x86_64/multiarch/strlen-evex.S: No such file or directory. (gdb) bt #0 __strlen_evex () at ../sysdeps/x86_64/multiarch/strlen-evex.S:77 #1 0x00007ffff74749a5 in __GI__IO_fputs (str=0x0, fp=0x7ffff75f5680 <_IO_2_1_stderr_>) #2 0x0000555555779f28 in do_new_line_std (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10) at util/stat-display.c:356 #3 0x000055555577a081 in print_metric_std (config=0x555555e077c0 <stat_config>, ctx=0x7fffffffbf10, color=0x0, fmt=0x5555558b77b5 "%8.1f", unit=0x7fffffffbb10 "% tma_memory_bound", val=13.165355724442199) at util/stat-display.c:380 #4 0x00005555557768b6 in generic_metric (config=0x555555e077c0 <stat_config>, metric_expr=0x55555593d5b7 "((CYCLE_ACTIVITY.STALLS_MEM_ANY + EXE_ACTIVITY.BOUND_ON_STORES) / (CYCLE_ACTIVITY.STALLS_TOTAL + (EXE_ACTIVITY.1_PORTS_UTIL + tma_retiring * EXE_ACTIVITY.2_PORTS_UTIL) + EXE_ACTIVITY.BOUND_ON_STORES))"..., metric_events=0x555555f334e0, metric_refs=0x555555ec81d0, name=0x555555f32e80 "TOPDOWN.SLOTS", metric_name=0x555555f26c80 "tma_memory_bound", metric_unit=0x55555593d5b1 "100%", runtime=0, map_idx=0, out=0x7fffffffbd90, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:934 #5 0x0000555555778cac in perf_stat__print_shadow_stats (config=0x555555e077c0 <stat_config>, evsel=0x555555f289d0, avg=4712355, map_idx=0, out=0x7fffffffbd90, metric_events=0x555555e078e8 <stat_config+296>, st=0x555555e9e620 <rt_stat>) at util/stat-shadow.c:1329 #6 0x000055555577b6a0 in printout (config=0x555555e077c0 <stat_config>, os=0x7fffffffbf10, uval=4712355, run=325322, ena=325322, noise=4712355, map_idx=0) at util/stat-display.c:741 #7 0x000055555577bc74 in print_counter_aggrdata (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, s=0, os=0x7fffffffbf10) at util/stat-display.c:838 #8 0x000055555577c1d8 in print_counter (config=0x555555e077c0 <stat_config>, counter=0x555555f289d0, os=0x7fffffffbf10) at util/stat-display.c:957 #9 0x000055555577dba0 in evlist__print_counters (evlist=0x555555ec3610, config=0x555555e077c0 <stat_config>, _target=0x555555e01c80 <target>, ts=0x0, argc=1, argv=0x7fffffffe450) at util/stat-display.c:1413 #10 0x00005555555fc821 in print_counters (ts=0x0, argc=1, argv=0x7fffffffe450) at builtin-stat.c:1040 #11 0x000055555560091a in cmd_stat (argc=1, argv=0x7fffffffe450) at builtin-stat.c:2665 #12 0x00005555556b1eea in run_builtin (p=0x555555e11f70 <commands+336>, argc=4, argv=0x7fffffffe450) at perf.c:322 #13 0x00005555556b2181 in handle_internal_command (argc=4, argv=0x7fffffffe450) at perf.c:376 #14 0x00005555556b22d7 in run_argv (argcp=0x7fffffffe27c, argv=0x7fffffffe270) at perf.c:420 #15 0x00005555556b26ef in main (argc=4, argv=0x7fffffffe450) at perf.c:550 (gdb) Fixes: f123b2d ("perf stat: Remove prefix argument in print_metric_headers()") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Link: http://lore.kernel.org/lkml/CAP-5=fUOjSM5HajU9TCD6prY39LbX4OQbkEbtKPPGRBPBN=_VQ@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…linux/kernel/git/tip/tip Pull SMP updates from Thomas Gleixner: "A large update for SMP management: - Parallel CPU bringup The reason why people are interested in parallel bringup is to shorten the (kexec) reboot time of cloud servers to reduce the downtime of the VM tenants. The current fully serialized bringup does the following per AP: 1) Prepare callbacks (allocate, intialize, create threads) 2) Kick the AP alive (e.g. INIT/SIPI on x86) 3) Wait for the AP to report alive state 4) Let the AP continue through the atomic bringup 5) Let the AP run the threaded bringup to full online state There are two significant delays: #3 The time for an AP to report alive state in start_secondary() on x86 has been measured in the range between 350us and 3.5ms depending on vendor and CPU type, BIOS microcode size etc. #4 The atomic bringup does the microcode update. This has been measured to take up to ~8ms on the primary threads depending on the microcode patch size to apply. On a two socket SKL server with 56 cores (112 threads) the boot CPU spends on current mainline about 800ms busy waiting for the APs to come up and apply microcode. That's more than 80% of the actual onlining procedure. This can be reduced significantly by splitting the bringup mechanism into two parts: 1) Run the prepare callbacks and kick the AP alive for each AP which needs to be brought up. The APs wake up, do their firmware initialization and run the low level kernel startup code including microcode loading in parallel up to the first synchronization point. (#1 and #2 above) 2) Run the rest of the bringup code strictly serialized per CPU (#3 - #5 above) as it's done today. Parallelizing that stage of the CPU bringup might be possible in theory, but it's questionable whether required surgery would be justified for a pretty small gain. If the system is large enough the first AP is already waiting at the first synchronization point when the boot CPU finished the wake-up of the last AP. That reduces the AP bringup time on that SKL from ~800ms to ~80ms, i.e. by a factor ~10x. The actual gain varies wildly depending on the system, CPU, microcode patch size and other factors. There are some opportunities to reduce the overhead further, but that needs some deep surgery in the x86 CPU bringup code. For now this is only enabled on x86, but the core functionality obviously works for all SMP capable architectures. - Enhancements for SMP function call tracing so it is possible to locate the scheduling and the actual execution points. That allows to measure IPI delivery time precisely" * tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) trace,smp: Add tracepoints for scheduling remotelly called functions trace,smp: Add tracepoints around remotelly called functions MAINTAINERS: Add CPU HOTPLUG entry x86/smpboot: Fix the parallel bringup decision x86/realmode: Make stack lock work in trampoline_compat() x86/smp: Initialize cpu_primary_thread_mask late cpu/hotplug: Fix off by one in cpuhp_bringup_mask() x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it x86/smpboot: Support parallel startup of secondary CPUs x86/smpboot: Implement a bit spinlock to protect the realmode stack x86/apic: Save the APIC virtual base address cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE x86/apic: Provide cpu_primary_thread mask x86/smpboot: Enable split CPU startup cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism cpu/hotplug: Reset task stack state in _cpu_up() cpu/hotplug: Remove unused state functions riscv: Switch to hotplug core state synchronization parisc: Switch to hotplug core state synchronization ...

ni_create_attr_list uses WARN_ON to catch error cases while generating attribute list, which only prints out stack trace and may not be enough. This repalces them with more proper error handling flow. [ 59.666332] BUG: kernel NULL pointer dereference, address: 000000000000000e [ 59.673268] #PF: supervisor read access in kernel mode [ 59.678354] #PF: error_code(0x0000) - not-present page [ 59.682831] PGD 8000000005ff1067 P4D 8000000005ff1067 PUD 7dee067 PMD 0 [ 59.688556] Oops: 0000 [#1] PREEMPT SMP KASAN PTI [ 59.692642] CPU: 0 PID: 198 Comm: poc Tainted: G B W 6.2.0-rc1+ #4 [ 59.698868] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 59.708795] RIP: 0010:ni_create_attr_list+0x505/0x860 [ 59.713657] Code: 7e 10 e8 5e d0 d0 ff 45 0f b7 76 10 48 8d 7b 16 e8 00 d1 d0 ff 66 44 89 73 16 4d 8d 75 0e 4c 89 f7 e8 3f d0 d0 ff 4c 8d8 [ 59.731559] RSP: 0018:ffff88800a56f1e0 EFLAGS: 00010282 [ 59.735691] RAX: 0000000000000001 RBX: ffff88800b7b5088 RCX: ffffffffb83079fe [ 59.741792] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffbb7f9fc0 [ 59.748423] RBP: ffff88800a56f3a8 R08: ffff88800b7b50a0 R09: fffffbfff76ff3f9 [ 59.754654] R10: ffffffffbb7f9fc7 R11: fffffbfff76ff3f8 R12: ffff88800b756180 [ 59.761552] R13: 0000000000000000 R14: 000000000000000e R15: 0000000000000050 [ 59.768323] FS: 00007feaa8c96440(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000 [ 59.776027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.781395] CR2: 00007f3a2e0b1000 CR3: 000000000a5bc000 CR4: 00000000000006f0 [ 59.787607] Call Trace: [ 59.790271] <TASK> [ 59.792488] ? __pfx_ni_create_attr_list+0x10/0x10 [ 59.797235] ? kernel_text_address+0xd3/0xe0 [ 59.800856] ? unwind_get_return_address+0x3e/0x60 [ 59.805101] ? __kasan_check_write+0x18/0x20 [ 59.809296] ? preempt_count_sub+0x1c/0xd0 [ 59.813421] ni_ins_attr_ext+0x52c/0x5c0 [ 59.817034] ? __pfx_ni_ins_attr_ext+0x10/0x10 [ 59.821926] ? __vfs_setxattr+0x121/0x170 [ 59.825718] ? __vfs_setxattr_noperm+0x97/0x300 [ 59.829562] ? __vfs_setxattr_locked+0x145/0x170 [ 59.833987] ? vfs_setxattr+0x137/0x2a0 [ 59.836732] ? do_setxattr+0xce/0x150 [ 59.839807] ? setxattr+0x126/0x140 [ 59.842353] ? path_setxattr+0x164/0x180 [ 59.845275] ? __x64_sys_setxattr+0x71/0x90 [ 59.848838] ? do_syscall_64+0x3f/0x90 [ 59.851898] ? entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 59.857046] ? stack_depot_save+0x17/0x20 [ 59.860299] ni_insert_attr+0x1ba/0x420 [ 59.863104] ? __pfx_ni_insert_attr+0x10/0x10 [ 59.867069] ? preempt_count_sub+0x1c/0xd0 [ 59.869897] ? _raw_spin_unlock_irqrestore+0x2b/0x50 [ 59.874088] ? __create_object+0x3ae/0x5d0 [ 59.877865] ni_insert_resident+0xc4/0x1c0 [ 59.881430] ? __pfx_ni_insert_resident+0x10/0x10 [ 59.886355] ? kasan_save_alloc_info+0x1f/0x30 [ 59.891117] ? __kasan_kmalloc+0x8b/0xa0 [ 59.894383] ntfs_set_ea+0x90d/0xbf0 [ 59.897703] ? __pfx_ntfs_set_ea+0x10/0x10 [ 59.901011] ? kernel_text_address+0xd3/0xe0 [ 59.905308] ? __kernel_text_address+0x16/0x50 [ 59.909811] ? unwind_get_return_address+0x3e/0x60 [ 59.914898] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 59.920250] ? arch_stack_walk+0xa2/0x100 [ 59.924560] ? filter_irq_stacks+0x27/0x80 [ 59.928722] ntfs_setxattr+0x405/0x440 [ 59.932512] ? __pfx_ntfs_setxattr+0x10/0x10 [ 59.936634] ? kvmalloc_node+0x2d/0x120 [ 59.940378] ? kasan_save_stack+0x41/0x60 [ 59.943870] ? kasan_save_stack+0x2a/0x60 [ 59.947719] ? kasan_set_track+0x29/0x40 [ 59.951417] ? kasan_save_alloc_info+0x1f/0x30 [ 59.955733] ? __kasan_kmalloc+0x8b/0xa0 [ 59.959598] ? __kmalloc_node+0x68/0x150 [ 59.963163] ? kvmalloc_node+0x2d/0x120 [ 59.966490] ? vmemdup_user+0x2b/0xa0 [ 59.969060] __vfs_setxattr+0x121/0x170 [ 59.972456] ? __pfx___vfs_setxattr+0x10/0x10 [ 59.976008] __vfs_setxattr_noperm+0x97/0x300 [ 59.981562] __vfs_setxattr_locked+0x145/0x170 [ 59.986100] vfs_setxattr+0x137/0x2a0 [ 59.989964] ? __pfx_vfs_setxattr+0x10/0x10 [ 59.993616] ? __kasan_check_write+0x18/0x20 [ 59.997425] do_setxattr+0xce/0x150 [ 60.000304] setxattr+0x126/0x140 [ 60.002967] ? __pfx_setxattr+0x10/0x10 [ 60.006471] ? __virt_addr_valid+0xcb/0x140 [ 60.010461] ? __call_rcu_common.constprop.0+0x1c7/0x330 [ 60.016037] ? debug_smp_processor_id+0x1b/0x30 [ 60.021008] ? kasan_quarantine_put+0x5b/0x190 [ 60.025545] ? putname+0x84/0xa0 [ 60.027910] ? __kasan_slab_free+0x11e/0x1b0 [ 60.031483] ? putname+0x84/0xa0 [ 60.033986] ? preempt_count_sub+0x1c/0xd0 [ 60.036876] ? __mnt_want_write+0xae/0x100 [ 60.040738] ? mnt_want_write+0x8f/0x150 [ 60.044317] path_setxattr+0x164/0x180 [ 60.048096] ? __pfx_path_setxattr+0x10/0x10 [ 60.052096] ? strncpy_from_user+0x175/0x1c0 [ 60.056482] ? debug_smp_processor_id+0x1b/0x30 [ 60.059848] ? fpregs_assert_state_consistent+0x6b/0x80 [ 60.064557] __x64_sys_setxattr+0x71/0x90 [ 60.068892] do_syscall_64+0x3f/0x90 [ 60.072868] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 60.077523] RIP: 0033:0x7feaa86e4469 [ 60.080915] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 60.097353] RSP: 002b:00007ffdbd8311e8 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc [ 60.103386] RAX: ffffffffffffffda RBX: 9461c5e290baac00 RCX: 00007feaa86e4469 [ 60.110322] RDX: 00007ffdbd831fe0 RSI: 00007ffdbd831305 RDI: 00007ffdbd831263 [ 60.116808] RBP: 00007ffdbd836180 R08: 0000000000000001 R09: 00007ffdbd836268 [ 60.123879] R10: 000000000000007d R11: 0000000000000286 R12: 0000000000400500 [ 60.130540] R13: 00007ffdbd836260 R14: 0000000000000000 R15: 0000000000000000 [ 60.136553] </TASK> [ 60.138818] Modules linked in: [ 60.141839] CR2: 000000000000000e [ 60.144831] ---[ end trace 0000000000000000 ]--- [ 60.149058] RIP: 0010:ni_create_attr_list+0x505/0x860 [ 60.153975] Code: 7e 10 e8 5e d0 d0 ff 45 0f b7 76 10 48 8d 7b 16 e8 00 d1 d0 ff 66 44 89 73 16 4d 8d 75 0e 4c 89 f7 e8 3f d0 d0 ff 4c 8d8 [ 60.172443] RSP: 0018:ffff88800a56f1e0 EFLAGS: 00010282 [ 60.176246] RAX: 0000000000000001 RBX: ffff88800b7b5088 RCX: ffffffffb83079fe [ 60.182752] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffbb7f9fc0 [ 60.189949] RBP: ffff88800a56f3a8 R08: ffff88800b7b50a0 R09: fffffbfff76ff3f9 [ 60.196950] R10: ffffffffbb7f9fc7 R11: fffffbfff76ff3f8 R12: ffff88800b756180 [ 60.203671] R13: 0000000000000000 R14: 000000000000000e R15: 0000000000000050 [ 60.209595] FS: 00007feaa8c96440(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000 [ 60.216299] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 60.222276] CR2: 00007f3a2e0b1000 CR3: 000000000a5bc000 CR4: 00000000000006f0 Signed-off-by: Edward Lo <loyuantsung@gmail.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

ntfs_read_ea is called when we want to read extended attributes. There are some sanity checks for the validity of the EAs. However, it fails to return a proper error code for the inconsistent attributes, which might lead to unpredicted memory accesses after return. [ 138.916927] BUG: KASAN: use-after-free in ntfs_set_ea+0x453/0xbf0 [ 138.923876] Write of size 4 at addr ffff88800205cfac by task poc/199 [ 138.931132] [ 138.933016] CPU: 0 PID: 199 Comm: poc Not tainted 6.2.0-rc1+ #4 [ 138.938070] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 138.947327] Call Trace: [ 138.949557] <TASK> [ 138.951539] dump_stack_lvl+0x4d/0x67 [ 138.956834] print_report+0x16f/0x4a6 [ 138.960798] ? ntfs_set_ea+0x453/0xbf0 [ 138.964437] ? kasan_complete_mode_report_info+0x7d/0x200 [ 138.969793] ? ntfs_set_ea+0x453/0xbf0 [ 138.973523] kasan_report+0xb8/0x140 [ 138.976740] ? ntfs_set_ea+0x453/0xbf0 [ 138.980578] __asan_store4+0x76/0xa0 [ 138.984669] ntfs_set_ea+0x453/0xbf0 [ 138.988115] ? __pfx_ntfs_set_ea+0x10/0x10 [ 138.993390] ? kernel_text_address+0xd3/0xe0 [ 138.998270] ? __kernel_text_address+0x16/0x50 [ 139.002121] ? unwind_get_return_address+0x3e/0x60 [ 139.005659] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 139.010177] ? arch_stack_walk+0xa2/0x100 [ 139.013657] ? filter_irq_stacks+0x27/0x80 [ 139.017018] ntfs_setxattr+0x405/0x440 [ 139.022151] ? __pfx_ntfs_setxattr+0x10/0x10 [ 139.026569] ? kvmalloc_node+0x2d/0x120 [ 139.030329] ? kasan_save_stack+0x41/0x60 [ 139.033883] ? kasan_save_stack+0x2a/0x60 [ 139.037338] ? kasan_set_track+0x29/0x40 [ 139.040163] ? kasan_save_alloc_info+0x1f/0x30 [ 139.043588] ? __kasan_kmalloc+0x8b/0xa0 [ 139.047255] ? __kmalloc_node+0x68/0x150 [ 139.051264] ? kvmalloc_node+0x2d/0x120 [ 139.055301] ? vmemdup_user+0x2b/0xa0 [ 139.058584] __vfs_setxattr+0x121/0x170 [ 139.062617] ? __pfx___vfs_setxattr+0x10/0x10 [ 139.066282] __vfs_setxattr_noperm+0x97/0x300 [ 139.070061] __vfs_setxattr_locked+0x145/0x170 [ 139.073580] vfs_setxattr+0x137/0x2a0 [ 139.076641] ? __pfx_vfs_setxattr+0x10/0x10 [ 139.080223] ? __kasan_check_write+0x18/0x20 [ 139.084234] do_setxattr+0xce/0x150 [ 139.087768] setxattr+0x126/0x140 [ 139.091250] ? __pfx_setxattr+0x10/0x10 [ 139.094948] ? __virt_addr_valid+0xcb/0x140 [ 139.097838] ? __call_rcu_common.constprop.0+0x1c7/0x330 [ 139.102688] ? debug_smp_processor_id+0x1b/0x30 [ 139.105985] ? kasan_quarantine_put+0x5b/0x190 [ 139.109980] ? putname+0x84/0xa0 [ 139.113886] ? __kasan_slab_free+0x11e/0x1b0 [ 139.117961] ? putname+0x84/0xa0 [ 139.121316] ? preempt_count_sub+0x1c/0xd0 [ 139.124427] ? __mnt_want_write+0xae/0x100 [ 139.127836] ? mnt_want_write+0x8f/0x150 [ 139.130954] path_setxattr+0x164/0x180 [ 139.133998] ? __pfx_path_setxattr+0x10/0x10 [ 139.137853] ? __pfx_ksys_pwrite64+0x10/0x10 [ 139.141299] ? debug_smp_processor_id+0x1b/0x30 [ 139.145714] ? fpregs_assert_state_consistent+0x6b/0x80 [ 139.150796] __x64_sys_setxattr+0x71/0x90 [ 139.155407] do_syscall_64+0x3f/0x90 [ 139.159035] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 139.163843] RIP: 0033:0x7f108cae4469 [ 139.166481] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 139.183764] RSP: 002b:00007fff87588388 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc [ 139.190657] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f108cae4469 [ 139.196586] RDX: 00007fff875883b0 RSI: 00007fff875883d1 RDI: 00007fff875883b6 [ 139.201716] RBP: 00007fff8758c530 R08: 0000000000000001 R09: 00007fff8758c618 [ 139.207940] R10: 0000000000000006 R11: 0000000000000286 R12: 00000000004004c0 [ 139.214007] R13: 00007fff8758c610 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Edward Lo <loyuantsung@gmail.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>

vduse_vdpa_set_vq_affinity callback can be called with NULL value as cpu_mask when deleting the vduse device. This patch resets virtqueue's IRQ affinity mask value to set all CPUs instead of dereferencing NULL cpu_mask. [ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 4760.959110] #PF: supervisor read access in kernel mode [ 4760.964247] #PF: error_code(0x0000) - not-present page [ 4760.969385] PGD 0 P4D 0 [ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI [ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4 [ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020 [ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130 [ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66 [ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246 [ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400 [ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898 [ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000 [ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000 [ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10 [ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000 [ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0 [ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4761.088909] PKRU: 55555554 [ 4761.091620] Call Trace: [ 4761.094074] <TASK> [ 4761.096180] ? __die+0x1f/0x70 [ 4761.099238] ? page_fault_oops+0x171/0x4f0 [ 4761.103340] ? exc_page_fault+0x7b/0x180 [ 4761.107265] ? asm_exc_page_fault+0x22/0x30 [ 4761.111460] ? memcpy_orig+0xc5/0x130 [ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse] [ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net] [ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net] [ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net] [ 4761.136580] virtio_dev_remove+0x3a/0x90 [ 4761.140509] device_release_driver_internal+0x19b/0x200 [ 4761.145742] bus_remove_device+0xc2/0x130 [ 4761.149755] device_del+0x158/0x3e0 [ 4761.153245] ? kernfs_find_ns+0x35/0xc0 [ 4761.157086] device_unregister+0x13/0x60 [ 4761.161010] unregister_virtio_device+0x11/0x20 [ 4761.165543] device_release_driver_internal+0x19b/0x200 [ 4761.170770] bus_remove_device+0xc2/0x130 [ 4761.174782] device_del+0x158/0x3e0 [ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa] [ 4761.183336] device_unregister+0x13/0x60 [ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] Fixes: 28f6288 ("vduse: Support set_vq_affinity callback") Cc: xieyongji@bytedance.com Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Message-Id: <20230622204851.318125-1-maxime.coquelin@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xie Yongji <xieyongji@bytedance.com>

…tnguy/net-queue Tony Nguyen says: ==================== igc: Fix corner cases for TSN offload Florian Kauer says: The igc driver supports several different offloading capabilities relevant in the TSN context. Recent patches in this area introduced regressions for certain corner cases that are fixed in this series. Each of the patches (except the first one) addresses a different regression that can be separately reproduced. Still, they have overlapping code changes so they should not be separately applied. Especially #4 and #6 address the same observation, but both need to be applied to avoid TX hang occurrences in the scenario described in the patches. ==================== Signed-off-by: Florian Kauer <florian.kauer@linutronix.de> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…ed variables Hist triggers can have referenced variables without having direct variables fields. This can be the case if referenced variables are added for trigger actions. In this case the newly added references will not have field variables. Not taking such referenced variables into consideration can result in a bug where it would be possible to remove hist trigger with variables being refenced. This will result in a bug that is easily reproducable like so $ cd /sys/kernel/tracing $ echo 'synthetic_sys_enter char[] comm; long id' >> synthetic_events $ echo 'hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger $ echo 'hist:keys=common_pid.execname,id.syscall:onmatch(raw_syscalls.sys_enter).synthetic_sys_enter($comm, id)' >> events/raw_syscalls/sys_enter/trigger $ echo '!hist:keys=common_pid.execname,id.syscall:vals=hitcount:comm=common_pid.execname' >> events/raw_syscalls/sys_enter/trigger [ 100.263533] ================================================================== [ 100.264634] BUG: KASAN: slab-use-after-free in resolve_var_refs+0xc7/0x180 [ 100.265520] Read of size 8 at addr ffff88810375d0f0 by task bash/439 [ 100.266320] [ 100.266533] CPU: 2 PID: 439 Comm: bash Not tainted 6.5.0-rc1 #4 [ 100.267277] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 100.268561] Call Trace: [ 100.268902] <TASK> [ 100.269189] dump_stack_lvl+0x4c/0x70 [ 100.269680] print_report+0xc5/0x600 [ 100.270165] ? resolve_var_refs+0xc7/0x180 [ 100.270697] ? kasan_complete_mode_report_info+0x80/0x1f0 [ 100.271389] ? resolve_var_refs+0xc7/0x180 [ 100.271913] kasan_report+0xbd/0x100 [ 100.272380] ? resolve_var_refs+0xc7/0x180 [ 100.272920] __asan_load8+0x71/0xa0 [ 100.273377] resolve_var_refs+0xc7/0x180 [ 100.273888] event_hist_trigger+0x749/0x860 [ 100.274505] ? kasan_save_stack+0x2a/0x50 [ 100.275024] ? kasan_set_track+0x29/0x40 [ 100.275536] ? __pfx_event_hist_trigger+0x10/0x10 [ 100.276138] ? ksys_write+0xd1/0x170 [ 100.276607] ? do_syscall_64+0x3c/0x90 [ 100.277099] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.277771] ? destroy_hist_data+0x446/0x470 [ 100.278324] ? event_hist_trigger_parse+0xa6c/0x3860 [ 100.278962] ? __pfx_event_hist_trigger_parse+0x10/0x10 [ 100.279627] ? __kasan_check_write+0x18/0x20 [ 100.280177] ? mutex_unlock+0x85/0xd0 [ 100.280660] ? __pfx_mutex_unlock+0x10/0x10 [ 100.281200] ? kfree+0x7b/0x120 [ 100.281619] ? ____kasan_slab_free+0x15d/0x1d0 [ 100.282197] ? event_trigger_write+0xac/0x100 [ 100.282764] ? __kasan_slab_free+0x16/0x20 [ 100.283293] ? __kmem_cache_free+0x153/0x2f0 [ 100.283844] ? sched_mm_cid_remote_clear+0xb1/0x250 [ 100.284550] ? __pfx_sched_mm_cid_remote_clear+0x10/0x10 [ 100.285221] ? event_trigger_write+0xbc/0x100 [ 100.285781] ? __kasan_check_read+0x15/0x20 [ 100.286321] ? __bitmap_weight+0x66/0xa0 [ 100.286833] ? _find_next_bit+0x46/0xe0 [ 100.287334] ? task_mm_cid_work+0x37f/0x450 [ 100.287872] event_triggers_call+0x84/0x150 [ 100.288408] trace_event_buffer_commit+0x339/0x430 [ 100.289073] ? ring_buffer_event_data+0x3f/0x60 [ 100.292189] trace_event_raw_event_sys_enter+0x8b/0xe0 [ 100.295434] syscall_trace_enter.constprop.0+0x18f/0x1b0 [ 100.298653] syscall_enter_from_user_mode+0x32/0x40 [ 100.301808] do_syscall_64+0x1a/0x90 [ 100.304748] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 100.307775] RIP: 0033:0x7f686c75c1cb [ 100.310617] Code: 73 01 c3 48 8b 0d 65 3c 10 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 21 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 35 3c 10 00 f7 d8 64 89 01 48 [ 100.317847] RSP: 002b:00007ffc60137a38 EFLAGS: 00000246 ORIG_RAX: 0000000000000021 [ 100.321200] RAX: ffffffffffffffda RBX: 000055f566469ea0 RCX: 00007f686c75c1cb [ 100.324631] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 000000000000000a [ 100.328104] RBP: 00007ffc60137ac0 R08: 00007f686c818460 R09: 000000000000000a [ 100.331509] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 [ 100.334992] R13: 0000000000000007 R14: 000000000000000a R15: 0000000000000007 [ 100.338381] </TASK> We hit the bug because when second hist trigger has was created has_hist_vars() returned false because hist trigger did not have variables. As a result of that save_hist_vars() was not called to add the trigger to trace_array->hist_vars. Later on when we attempted to remove the first histogram find_any_var_ref() failed to detect it is being used because it did not find the second trigger in hist_vars list. With this change we wait until trigger actions are created so we can take into consideration if hist trigger has variable references. Also, now we check the return value of save_hist_vars() and fail trigger creation if save_hist_vars() fails. Link: https://lore.kernel.org/linux-trace-kernel/20230712223021.636335-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 067fe03 ("tracing: Add variable reference handling to hist triggers") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f519 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad25 ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: event 0x0e hci_cmd_complete_evt:4231: hci0: opcode 0x2062 hci_cc_le_set_cig_params:3846: hci0: status 0x07 hci_sent_cmd_data:3107: hci0 opcode 0x2062 iso_connect_cfm:1703: hcon 0000000093bc551f bdaddr 28:3d:c2:4a:7e:da status 7 iso_conn_del:187: hcon 0000000093bc551f conn 00000000768ae504, err 12 hci_conn_del:1151: hci0 hcon 0000000093bc551f handle 65535 hci_conn_unlink:1102: hci0: hcon 0000000093bc551f hci_chan_list_flush:2780: hcon 0000000093bc551f __iso_chan_add:214: conn 00000000768ae504 <Note: this conn was already freed in iso_conn_del above> iso_sock_clear_timer:117: sock 0000000098323f95 state 3 general protection fault, probably for non-canonical address 0x30b29c630930aec8: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1920 Comm: bluetoothd Tainted: G E 6.3.0-rc7+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:detach_if_pending+0x28/0xd0 Code: 90 90 0f 1f 44 00 00 48 8b 47 08 48 85 c0 0f 84 ad 00 00 00 55 89 d5 53 48 83 3f 00 48 89 fb 74 7d 66 90 48 8b 03 48 8b 53 08 <> RSP: 0018:ffffb90841a67d08 EFLAGS: 00010007 RAX: 0000000000000000 RBX: ffff9141bd5061b8 RCX: 0000000000000000 RDX: 30b29c630930aec8 RSI: ffff9141fdd21e80 RDI: ffff9141bd5061b8 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffb90841a67b88 R10: 0000000000000003 R11: ffffffff8613f558 R12: ffff9141fdd21e80 R13: 0000000000000000 R14: ffff9141b5976010 R15: ffff914185755338 FS: 00007f45768bd840(0000) GS:ffff9141fdd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000619000424074 CR3: 0000000009f5e005 CR4: 0000000000170ee0 Call Trace: <TASK> timer_delete+0x48/0x80 try_to_grab_pending+0xdf/0x170 __cancel_work+0x37/0xb0 iso_connect_cis+0x141/0x400 [bluetooth] =============================================================== Trace with NULL conn->hcon in state BT_CONNECT: =============================================================== __iso_sock_close:619: sk 00000000f7c71fc5 state 1 socket 00000000d90c5fe5 ... __iso_sock_close:619: sk 00000000f7c71fc5 state 8 socket 00000000d90c5fe5 iso_chan_del:153: sk 00000000f7c71fc5, conn 0000000022c03a7e, err 104 ... iso_sock_connect:862: sk 00000000129b56c3 iso_connect_cis:348: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7d:2a hci_dev_hold:1495: hci0 orig refcnt 19 __iso_chan_add:214: conn 0000000022c03a7e <Note: reusing old conn> iso_sock_clear_timer:117: sock 00000000129b56c3 state 3 ... iso_sock_ready:1485: sk 00000000129b56c3 ... iso_sock_sendmsg:1077: sock 00000000e5013966, sk 00000000129b56c3 BUG: kernel NULL pointer dereference, address: 00000000000006a8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1403 Comm: wireplumber Tainted: G E 6.3.0-rc7+ #4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:iso_sock_sendmsg+0x63/0x2a0 [bluetooth] =============================================================== Fixes: 241f519 ("Bluetooth: ISO: Avoid circular locking dependency") Fixes: 6a5ad25 ("Bluetooth: ISO: Fix possible circular locking dependency") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

KCSAN has discovered a data race in kernel/workqueue.c:2598: [ 1863.554079] ================================================================== [ 1863.554118] BUG: KCSAN: data-race in process_one_work / process_one_work [ 1863.554142] write to 0xffff963d99d79998 of 8 bytes by task 5394 on cpu 27: [ 1863.554154] process_one_work (kernel/workqueue.c:2598) [ 1863.554166] worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2752) [ 1863.554177] kthread (kernel/kthread.c:389) [ 1863.554186] ret_from_fork (arch/x86/kernel/process.c:145) [ 1863.554197] ret_from_fork_asm (arch/x86/entry/entry_64.S:312) [ 1863.554213] read to 0xffff963d99d79998 of 8 bytes by task 5450 on cpu 12: [ 1863.554224] process_one_work (kernel/workqueue.c:2598) [ 1863.554235] worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2752) [ 1863.554247] kthread (kernel/kthread.c:389) [ 1863.554255] ret_from_fork (arch/x86/kernel/process.c:145) [ 1863.554266] ret_from_fork_asm (arch/x86/entry/entry_64.S:312) [ 1863.554280] value changed: 0x0000000000001766 -> 0x000000000000176a [ 1863.554295] Reported by Kernel Concurrency Sanitizer on: [ 1863.554303] CPU: 12 PID: 5450 Comm: kworker/u64:1 Tainted: G L 6.5.0-rc6+ #44 [ 1863.554314] Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 [ 1863.554322] Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] [ 1863.554941] ================================================================== lockdep_invariant_state(true); → pwq->stats[PWQ_STAT_STARTED]++; trace_workqueue_execute_start(work); worker->current_func(work); Moving pwq->stats[PWQ_STAT_STARTED]++; before the line raw_spin_unlock_irq(&pool->lock); resolves the data race without performance penalty. KCSAN detected at least one additional data race: [ 157.834751] ================================================================== [ 157.834770] BUG: KCSAN: data-race in process_one_work / process_one_work [ 157.834793] write to 0xffff9934453f77a0 of 8 bytes by task 468 on cpu 29: [ 157.834804] process_one_work (/home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2606) [ 157.834815] worker_thread (/home/marvin/linux/kernel/linux_torvalds/./include/linux/list.h:292 /home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2752) [ 157.834826] kthread (/home/marvin/linux/kernel/linux_torvalds/kernel/kthread.c:389) [ 157.834834] ret_from_fork (/home/marvin/linux/kernel/linux_torvalds/arch/x86/kernel/process.c:145) [ 157.834845] ret_from_fork_asm (/home/marvin/linux/kernel/linux_torvalds/arch/x86/entry/entry_64.S:312) [ 157.834859] read to 0xffff9934453f77a0 of 8 bytes by task 214 on cpu 7: [ 157.834868] process_one_work (/home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2606) [ 157.834879] worker_thread (/home/marvin/linux/kernel/linux_torvalds/./include/linux/list.h:292 /home/marvin/linux/kernel/linux_torvalds/kernel/workqueue.c:2752) [ 157.834890] kthread (/home/marvin/linux/kernel/linux_torvalds/kernel/kthread.c:389) [ 157.834897] ret_from_fork (/home/marvin/linux/kernel/linux_torvalds/arch/x86/kernel/process.c:145) [ 157.834907] ret_from_fork_asm (/home/marvin/linux/kernel/linux_torvalds/arch/x86/entry/entry_64.S:312) [ 157.834920] value changed: 0x000000000000052a -> 0x0000000000000532 [ 157.834933] Reported by Kernel Concurrency Sanitizer on: [ 157.834941] CPU: 7 PID: 214 Comm: kworker/u64:2 Tainted: G L 6.5.0-rc7-kcsan-00169-g81eaf55a60fc #4 [ 157.834951] Hardware name: ASRock X670E PG Lightning/X670E PG Lightning, BIOS 1.21 04/26/2023 [ 157.834958] Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] [ 157.835567] ================================================================== in code: trace_workqueue_execute_end(work, worker->current_func); → pwq->stats[PWQ_STAT_COMPLETED]++; lock_map_release(&lockdep_map); lock_map_release(&pwq->wq->lockdep_map); which needs to be resolved separately. Fixes: 725e8ec ("workqueue: Add pwq->stats[] and a monitoring script") Cc: Tejun Heo <tj@kernel.org> Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com> Link: https://lore.kernel.org/lkml/20230818194448.29672-1-mirsad.todorovac@alu.unizg.hr/ Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Tejun Heo <tj@kernel.org>

…git/vgupta/arc Pull ARC updates from Vineet Gupta: - fixes for -Wmissing-prototype warnings - missing compiler barrier in relaxed atomics - some uaccess simplification, declutter - removal of massive glocal struct cpuinfo_arc from bootlog code - __switch_to consolidation (removal of inline asm variant) - use GP to cache task pointer (vs. r25) - misc rework of entry code * tag 'arc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (24 commits) ARC: boot log: fix warning arc: Explicitly include correct DT includes ARC: pt_regs: create seperate type for ecr ARCv2: entry: rearrange pt_regs slightly ARC: entry: replace 8 byte ADD.ne with 4 byte ADD2.ne ARC: entry: replace 8 byte OR with 4 byte BSET ARC: entry: Add more common chores to EXCEPTION_PROLOGUE ARC: entry: EV_MachineCheck dont re-read ECR ARC: entry: ARcompact EV_ProtV to use r10 directly ARC: entry: rework (non-functional) ARC: __switch_to: move ksp to thread_info from thread_struct ARC: __switch_to: asm with dwarf ops (vs. inline asm) ARC: kernel stack: INIT_THREAD need not setup @init_stack in @ksp ARC: entry: use gp to cache task pointer (vs. r25) ARC: boot log: eliminate struct cpuinfo_arc #4: boot log per ISA ARC: boot log: eliminate struct cpuinfo_arc #3: don't export ARC: boot log: eliminate struct cpuinfo_arc #2: cache ARC: boot log: eliminate struct cpuinfo_arc #1: mm ARCv2: memset: don't prefetch for len == 0 which happens a alot ARC: uaccess: elide unaliged handling if hardware supports ...

When the plug qdisc is used as a class of the qfq qdisc it could trigger a UAF. This issue can be reproduced with following commands: tc qdisc add dev lo root handle 1: qfq tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512 tc qdisc add dev lo parent 1:1 handle 2: plug tc filter add dev lo parent 1: basic classid 1:1 ping -c1 127.0.0.1 and boom: [ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0 [ 285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144 [ 285.355903] [ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4 [ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 285.358376] Call Trace: [ 285.358773] <IRQ> [ 285.359109] dump_stack_lvl+0x44/0x60 [ 285.359708] print_address_description.constprop.0+0x2c/0x3c0 [ 285.360611] kasan_report+0x10c/0x120 [ 285.361195] ? qfq_dequeue+0xa7/0x7f0 [ 285.361780] qfq_dequeue+0xa7/0x7f0 [ 285.362342] __qdisc_run+0xf1/0x970 [ 285.362903] net_tx_action+0x28e/0x460 [ 285.363502] __do_softirq+0x11b/0x3de [ 285.364097] do_softirq.part.0+0x72/0x90 [ 285.364721] </IRQ> [ 285.365072] <TASK> [ 285.365422] __local_bh_enable_ip+0x77/0x90 [ 285.366079] __dev_queue_xmit+0x95f/0x1550 [ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10 [ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10 [ 285.368259] ? __build_skb_around+0x129/0x190 [ 285.368960] ? ip_generic_getfrag+0x12c/0x170 [ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 285.370390] ? csum_partial+0x8/0x20 [ 285.370961] ? raw_getfrag+0xe5/0x140 [ 285.371559] ip_finish_output2+0x539/0xa40 [ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10 [ 285.372954] ip_output+0x113/0x1e0 [ 285.373512] ? __pfx_ip_output+0x10/0x10 [ 285.374130] ? icmp_out_count+0x49/0x60 [ 285.374739] ? __pfx_ip_finish_output+0x10/0x10 [ 285.375457] ip_push_pending_frames+0xf3/0x100 [ 285.376173] raw_sendmsg+0xef5/0x12d0 [ 285.376760] ? do_syscall_64+0x40/0x90 [ 285.377359] ? __static_call_text_end+0x136578/0x136578 [ 285.378173] ? do_syscall_64+0x40/0x90 [ 285.378772] ? kasan_enable_current+0x11/0x20 [ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10 [ 285.380137] ? __sock_create+0x13e/0x270 [ 285.380673] ? __sys_socket+0xf3/0x180 [ 285.381174] ? __x64_sys_socket+0x3d/0x50 [ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.382425] ? __rcu_read_unlock+0x48/0x70 [ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380 [ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 285.384295] ? preempt_count_sub+0x14/0xc0 [ 285.384844] ? __list_del_entry_valid+0x76/0x140 [ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0 [ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10 [ 285.386645] ? release_sock+0xa0/0xd0 [ 285.387148] ? preempt_count_sub+0x14/0xc0 [ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0 [ 285.388341] ? aa_sk_perm+0x177/0x390 [ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10 [ 285.389441] ? check_stack_object+0x22/0x70 [ 285.390032] ? inet_send_prepare+0x2f/0x120 [ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10 [ 285.391172] sock_sendmsg+0xcc/0xe0 [ 285.391667] __sys_sendto+0x190/0x230 [ 285.392168] ? __pfx___sys_sendto+0x10/0x10 [ 285.392727] ? kvm_clock_get_cycles+0x14/0x30 [ 285.393328] ? set_normalized_timespec64+0x57/0x70 [ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40 [ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160 [ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10 [ 285.395908] ? _copy_to_user+0x3e/0x60 [ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.397734] ? do_syscall_64+0x71/0x90 [ 285.398258] __x64_sys_sendto+0x74/0x90 [ 285.398786] do_syscall_64+0x64/0x90 [ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.400605] ? do_syscall_64+0x71/0x90 [ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.401807] RIP: 0033:0x495726 [ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09 [ 285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726 [ 285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000 [ 285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c [ 285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634 [ 285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000 [ 285.410403] </TASK> [ 285.410704] [ 285.410929] Allocated by task 144: [ 285.411402] kasan_save_stack+0x1e/0x40 [ 285.411926] kasan_set_track+0x21/0x30 [ 285.412442] __kasan_slab_alloc+0x55/0x70 [ 285.412973] kmem_cache_alloc_node+0x187/0x3d0 [ 285.413567] __alloc_skb+0x1b4/0x230 [ 285.414060] __ip_append_data+0x17f7/0x1b60 [ 285.414633] ip_append_data+0x97/0xf0 [ 285.415144] raw_sendmsg+0x5a8/0x12d0 [ 285.415640] sock_sendmsg+0xcc/0xe0 [ 285.416117] __sys_sendto+0x190/0x230 [ 285.416626] __x64_sys_sendto+0x74/0x90 [ 285.417145] do_syscall_64+0x64/0x90 [ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.418306] [ 285.418531] Freed by task 144: [ 285.418960] kasan_save_stack+0x1e/0x40 [ 285.419469] kasan_set_track+0x21/0x30 [ 285.419988] kasan_save_free_info+0x27/0x40 [ 285.420556] ____kasan_slab_free+0x109/0x1a0 [ 285.421146] kmem_cache_free+0x1c2/0x450 [ 285.421680] __netif_receive_skb_core+0x2ce/0x1870 [ 285.422333] __netif_receive_skb_one_core+0x97/0x140 [ 285.423003] process_backlog+0x100/0x2f0 [ 285.423537] __napi_poll+0x5c/0x2d0 [ 285.424023] net_rx_action+0x2be/0x560 [ 285.424510] __do_softirq+0x11b/0x3de [ 285.425034] [ 285.425254] The buggy address belongs to the object at ffff8880bad31280 [ 285.425254] which belongs to the cache skbuff_head_cache of size 224 [ 285.426993] The buggy address is located 40 bytes inside of [ 285.426993] freed 224-byte region [ffff8880bad31280, ffff8880bad31360) [ 285.428572] [ 285.428798] The buggy address belongs to the physical page: [ 285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31 [ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1) [ 285.431447] page_type: 0xffffffff() [ 285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000 [ 285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 285.433562] page dumped because: kasan: bad access detected [ 285.434144] [ 285.434320] Memory state around the buggy address: [ 285.434828] ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.435580] ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 285.436777] ^ [ 285.437106] ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 285.437616] ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.438126] ================================================================== [ 285.438662] Disabling lock debugging due to kernel taint Fix this by: 1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a function compatible with non-work-conserving qdiscs 2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq. Fixes: 462dbc9 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: valis <sec@valis.email> Signed-off-by: valis <sec@valis.email> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

dmeyergio and others added 16 commits November 27, 2017 14:29

NTB: ntb_test: Safely use paths with whitespace

c8a4bc0

If some of variables like LOC/REM or LOCAL_*/REMOTE_* got whitespaces, the script may fail with syntax error. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

NTB: ntb_test: Update ntb_perf tests

77a7de6

ntb_perf driver has been also updated so to have the multi-port interface support. User now must specify what peer port is going to be used to perform the test. Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

jonmason force-pushed the ntb branch 2 times, most recently from 0f2ab72 to a944ccc Compare June 13, 2019 13:15

jonmason force-pushed the ntb branch from f96cb82 to 38de3af Compare September 5, 2021 22:17

jonmason force-pushed the ntb branch 2 times, most recently from 68d2391 to a914fc5 Compare August 9, 2022 16:15

jonmason force-pushed the ntb branch from a7ef646 to 061a785 Compare September 20, 2024 15:08

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ntb #4

ntb #4

atulraut commented Mar 12, 2018

ntb #4

Are you sure you want to change the base?

ntb #4

Conversation

atulraut commented Mar 12, 2018