Unix is user-friendly; it's just choosy about who its friends are.
—
Anonymous
Contained within this repository is years' worth of configuration files for my personal setup on macOS (and Linux). While these, by nature, are ever changing to suit my command-line needs, they are nevertheless packaged in such a way that they can be enjoyed by downstream users.
Important
I make no promises or guarantees about the stability of this configuration. It is entirely possible (even likely) that the tools I use will slowly change as my needs evolve. That being said, I do try to avoid breaking changes as far as the installer is concerned. Once installed, your local clone of my dotfiles should be indefinitely upgradable as specified by the instructions below.
Caution
During installation, I recommend using my dotfiles manager script, dots, to
simplify the setup process. It should go without saying that you should make
sure you trust any code before you run it. In the spirit of openness, I
encourage you to read through the script beforehand to ensure it
doesn't do anything you're not comfortable with.
For the scripts to properly run, it's expected that you have a reasonable
POSIX-like shell linked at /bin/sh (bash and dash should both be fine).
Almost all Unix-like operating systems should already have this set up for you.
The following programs are required to perform automated installation:
curl: Request files over the Internet.git: Clone this (and other) repositories containing configuration files or setup tools.make: Smartly (re)install only updated parts of the configuration as-needed.stow: Manage symbolic links between your local clone of this repository and their expected paths under$HOME.
Tip
If you are on macOS, it is highly recommended you install Homebrew to manage dependencies for you (see here for more details). If you have done so, then the above dependencies will be automatically installed during setup.
After installing the above dependencies, you have two main options for installing: Quickstart and Manual.
So, you're looking to just get this over with already? Your troubles end here! Simply paste this command to download the installer and get on your merry way:
curl --proto '=https' --tlsv1.2 -sSf https://zakhary.dev/dotfiles/script/install | shAssuming everything worked as expected, you should receive a message that installation was completed and can move on to next steps.
You're the type that prefers to do things yourself. I totally get it. Let's walk through each part of what we're going to be doing here.
Start by cloning this repository to your home directory:
git clone https://github.com/kaplanz/dotfiles.git ~/.dotsNote
You may have noticed that we're explicitly cloning into $HOME/.dots. This is
the preferred location for the repository. Although not required, the
installer (and Makefile) both expect to find it at this path. If you
choose to run the configuration out of another location, it is required that
you set the environment variable DOTS to the path before running any of
those scripts.
From this point on, if you've taken a look at your local clone and are satisfied that my scripts don't do anything suspicious, you can always choose to run the installer manually to get the rest of setup over with.
~/.dots/bin/dots installTip
If you're getting an error about libdots.sh not being found, run export DOTS=~/.dots and try again.
The bulk of the actual installation is handled by make. This includes
symlinking the actual dotfiles to their respective locations (using a tool
called stow; basically a Perl script), as well as downloading external
configuration for tmux and zsh.
Running make from within your repository clone will perform these steps,
usually done by the installer.
Once properly set up, change your shell with chsh -s zsh and enjoy your shiny
new configuration. (You may need to restart your shell for good measure.)
Assuming everything works at this point, the real fun begins.
Note
If you performed manual installation, or do not have Homebrew installed (such as on Linux, where I do not recommended it), you may need to install some of the tools described below using your package manager.
On Debian-based Linux distributions, you can do this with apt, e.g.:
sudo apt install bat coreutils eza fdfind fzf neovim ripgrep stow tmux zshYour prompt should now look something like ~ ». By default, zsh will now use
vi mode key bindings. Furthermore, using a great tool called fzf, the
following keys have been supercharged:
<C-R>: Easily find useful previous commands from your history.<C-T>: Insert a path to any file or directory underneath your$PWD.<M-C>: Quickly search for a child directory to change to.
Note
Some of these fzf bindings use a tool called fd (or fdfind), which must be
separately installed (and in your path as fd) for these mappings to work
properly.
Tip
Full configuration is available at ~/.config/zsh.
While minimal, tmux has also been configured with a slightly cleaner look and
more intuitive bindings (to me). For a detailed look at the bindings and
configuration, see tmux.conf.
Tip
Full configuration is available at ~/.config/tmux.
My Neovim configuration should have also been installed. If you plan to use it, I highly recommend you check out its README for more info.
Tip
Full configuration is available at ~/.config/nvim.
It is often the case that you want to add lines of configuration to your shell.
When using my dotfiles, it is recommended to place any such configuration in a
file at ~/.config/zsh/.zlogin.
Warning
The usual files locations under $HOME (such as ~/.zlogin) are no longer
read, as shell configuration was moved to ~/.config/zsh.
If you encounter any problems, please feel free to reach out to me directly, or better yet, raise an issue.
All managed dotfiles can be unlinked using the Makefile:
make -C ~/.dots uninstallAfterwards, to fully remove this repository, simply delete it:
rm -rf ~/.dotsHomebrew is the unofficial "missing package manager for macOS." It is a
fantastic alternative to manually installing programs on an Apple system,
instead working much like any other traditional package manager (such as apt,
pacman, or xbps).
You can easily install it using the following command, shamelessly copied from the project's homepage.
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"