This fork contains tweaks and modifications that may or may not be compatible with official builds of the main project. The changes implemented here are quick and dirty - they work for my purposes, but are not held to the same standards of quality or stability as the main project. Use at your own risk! Consider this an unofficial playground for experiments and rapid prototyping rather than a robust or supported software package.
We have tried to simplify the onboarding process as much as possible. It is no longer required to build Willow yourself. All you have to do is run Willow Application Server and connect to it. From there, you will be guided to the Willow Web Flasher, which will download a Willow release image from Github, inject your Wi-Fi credentials and WAS URL into the NVS partition, and flash it to your device.
docker run --detach --name=willow-application-server --pull=always --network=host --restart=unless-stopped --volume=was-storage:/app/storage ghcr.io/kovrom/willow-application-server:0.2.0-rc.2
git clone https://github.com/kovrom/willow-application-server.git && cd willow-application-server
./utils.sh build
./utils.sh build-web-ui
./utils.sh run
Visit http://my_was_host:8502 in your browser.
OTA upgrades allow you to update Willow devices without having to re-connect them to your computer to flash. It's a very safe process with a great deal of verification, automatic rollbacks on upgrade failure, etc.
We list published releases with OTA assets. Select the desired release and click the "Upgrade" button. If the release is not already cached in WAS, WAS will download the binary from Github and cache it, then instruct the target Willow device to start the upgrade from your running WAS instance. Alternatively, you can just upgrade the device from the clients page and WAS will cache it automatically on first request. This makes it possible to run Willow in an isolated VLAN without Internet access.
After building with Willow you can provide your build to WAS to upgrade your local devices using OTA.
Make sure you select the appropriate target hardware from the "Audio HAL" section during build. Then run ./utils.sh build as you normally would.
To use your custom binary for OTA place build/willow.bin from your Willow build directory in the ota/local directory of the was-storage volume using the following filenames:
- ESP32-S3-BOX-3.bin
- ESP32-S3-BOX.bin
- ESP32-S3-BOX-LITE.bin
To copy the file to your WAS instance:
docker cp build/willow.bin willow-application-server:/app/storage/ota/local/ESP32-S3-BOX-3.bin
Your provided build will now be available as the "local" release under the various upgrade options available in the Willow Web UI. You can copy new builds and upgrade however you see fit as you do development and create new Willow builds. If you run into a boot loop, bad flash, etc you can always recover your device from the Willow Web Flasher or Willow build system and try again.