BadgerDB is an embeddable, persistent, simple and fast key-value (KV) database written in pure Go. It's meant to be a performant alternative to non-Go-based key-value stores like RocksDB.
Badger v1.0 was released in Nov 2017. The latest release is v1.0.0
We introduced transactions in v0.9.0 which involved a major API change. If you have a Badger datastore prior to that, please use v0.8.1, but we strongly urge you to upgrade. Upgrading from both v0.8 and v0.9 will require you to take backups and restore using the new version.
To start using Badger, install Go 1.8 or above and run go get:
$ go get github.com/dgraph-io/badger/...This will retrieve the library and install the badger_info command line
utility into your $GOBIN path.
The top-level object in Badger is a DB. It represents multiple files on disk
in specific directories, which contain the data for a single database.
To open your database, use the badger.Open() function, with the appropriate
options. The Dir and ValueDir options are mandatory and must be
specified by the client. They can be set to the same value to simplify things.
package main
import (
"log"
"github.com/dgraph-io/badger"
)
func main() {
// Open the Badger database located in the /tmp/badger directory.
// It will be created if it doesn't exist.
opts := badger.DefaultOptions
opts.Dir = "/tmp/badger"
opts.ValueDir = "/tmp/badger"
db, err := badger.Open(opts)
if err != nil {
log.Fatal(err)
}
defer db.Close()
// Your code here…
}Please note that Badger obtains a lock on the directories so multiple processes cannot open the same database at the same time.
To start a read-only transaction, you can use the DB.View() method:
err := db.View(func(tx *badger.Txn) error {
// Your code here…
return nil
})You cannot perform any writes or deletes within this transaction. Badger ensures that you get a consistent view of the database within this closure. Any writes that happen elsewhere after the transaction has started, will not be seen by calls made within the closure.
To start a read-write transaction, you can use the DB.Update() method:
err := db.Update(func(tx *badger.Txn) error {
// Your code here…
return nil
})All database operations are allowed inside a read-write transaction.
Always check the return error as it will report an ErrConflict in case of
conflict or other errors, for e.g. due to disk failures. If you return an error
within your closure it will be passed through.
The DB.View() and DB.Update() methods are wrappers around the
DB.NewTransaction() and Txn.Commit() methods (or Txn.Discard() in case of
read-only transactions). These helper methods will start the transaction,
execute a function, and then safely discard your transaction if an error is
returned. This is the recommended way to use Badger transactions.
However, sometimes you may want to manually create and commit your
transactions. You can use the DB.NewTransaction() function directly, which
takes in a boolean argument to specify whether a read-write transaction is
required. For read-write transactions, it is necessary to call Txn,Commit()
to ensure the transaction is committed. For read-only transactions, calling
Txn.Discard() is sufficient. Txn.Commit() also calls Txn.Discard()
internally to cleanup the transaction, so just calling Txn.Commit() is
sufficient for read-write transaction. However, if your code doesn’t call
Txn.Commit() for some reason (for e.g it returns prematurely with an error),
then please make sure you call Txn.Discard() in a defer block. Refer to the
code below.
// Start a writable transaction.
txn, err := db.NewTransaction(true)
if err != nil {
return err
}
defer txn.Discard()
// Use the transaction...
err := txn.Set([]byte("answer"), []byte("42"))
if err != nil {
return err
}
// Commit the transaction and check for error.
if err := txn.Commit(nil); err != nil {
return err
}The first argument to DB.NewTransaction() is a boolean stating if the transaction
should be writable.
Badger allows an optional callback to the Txn.Commit() method. Normally, the
callback can be set to nil, and the method will return after all the writes
have succeeded. However, if this callback is provided, the Txn.Commit()
method returns as soon as it has checked for any conflicts. The actual writing
to the disk happens asynchronously, and the callback is invoked once the
writing has finished, or an error has occurred. This can improve the throughput
of the application in some cases. But it also means that a transaction is not
durable until the callback has been invoked with a nil error value.
To save a key/value pair, use the Txn.Set() method:
err := db.Update(func(txn *badger.Txn) error {
err := txn.Set([]byte("answer"), []byte("42"))
return err
})This will set the value of the "answer" key to "42". To retrieve this
value, we can use the Txn.Get() method:
err := db.View(func(txn *badger.Txn) error {
item, err := txn.Get([]byte("answer"))
if err != nil {
return err
}
val, err := item.Value()
if err != nil {
return err
}
fmt.Printf("The answer is: %s\n", val)
return nil
})Txn.Get() returns ErrKeyNotFound if the value is not found.
Please note that values returned from Get() are only valid while the
transaction is open. If you need to use a value outside of the transaction
then you must use copy() to copy it to another byte slice.
Use the Txn.Delete() method to delete a key.
Badger allows setting an optional Time to Live (TTL) value on keys. Once the TTL has
elapsed, the key will no longer be retrievable and will be eligible for garbage
collection. A TTL can be set as a time.Duration value using the Txn.SetWithTTL()
API method.
An optional user metadata value can be set on each key. A user metadata value
is represented by a single byte. It can be used to set certain bits along
with the key to aid in interpreting or decoding the key-value pair. User
metadata can be set using the Txn.SetWithMeta() API method.
To iterate over keys, we can use an Iterator, which can be obtained using the
Txn.NewIterator() method.
err := db.View(func(txn *badger.Txn) error {
opts := badger.DefaultIteratorOptions
opts.PrefetchSize = 10
it := txn.NewIterator(opts)
for it.Rewind(); it.Valid(); it.Next() {
item := it.Item()
k := item.Key()
v, err := item.Value()
if err != nil {
return err
}
fmt.Printf("key=%s, value=%s\n", k, v)
}
return nil
})The iterator allows you to move to a specific point in the list of keys and move forward or backward through the keys one at a time.
By default, Badger prefetches the values of the next 100 items. You can adjust
that with the IteratorOptions.PrefetchSize field. However, setting it to
a value higher than GOMAXPROCS (which we recommend to be 128 or higher)
shouldn’t give any additional benefits. You can also turn off the fetching of
values altogether. See section below on key-only iteration.
To iterate over a key prefix, you can combine Seek() and ValidForPrefix():
db.View(func(txn *badger.Txn) error {
it := txn.NewIterator(&DefaultIteratorOptions)
prefix := []byte("1234")
for it.Seek(prefix); it.ValidForPrefix(prefix); it.Next() {
item := it.Item()
k := item.Key()
v, err := item.Value()
if err != nil {
return err
}
fmt.Printf("key=%s, value=%s\n", k, v)
}
return nil
})Badger supports a unique mode of iteration called key-only iteration. It is
several order of magnitudes faster than regular iteration, because it involves
access to the LSM-tree only, which is usually resident entirely in RAM. To
enable key-only iteration, you need to set the IteratorOptions.PrefetchValues
field to false. This can also be used to do sparse reads for selected keys
during an iteration, by calling item.Value() only when required.
err := db.View(func(txn *badger.Txn) error {
opts := badger.DefaultIteratorOptions
opts.PrefetchValues = false
it := txn.NewIterator(opts)
for it.Rewind(); it.Valid(); it.Next() {
item := it.Item()
k := item.Key()
fmt.Printf("key=%s\n", k)
}
return nil
})Badger values need to be garbage collected, because of two reasons:
-
Badger keeps values separately from the LSM tree. This means that the compaction operations that clean up the LSM tree do not touch the values at all. Values need to be cleaned up separately.
-
Concurrent read/write transactions could leave behind multiple values for a single key, because they are stored with different versions. These could accumulate, and take up unneeded space beyond the time these older versions are needed.
Badger relies on the client to perform garbage collection at a time of their choosing. It provides the following methods, which can be invoked at an appropriate time:
DB.PurgeOlderVersions(): This method iterates over the database, and cleans up all but the latest versions of the key-value pairs. It marks the older versions as deleted, which makes them eligible for garbage collection.DB.PurgeVersionsBelow(key, ts): This method is useful to do a more targeted clean up of older versions of key-value pairs. You can specify a key, and a timestamp. All versions of the key older than the timestamp are marked as deleted, making them eligible for garbage collection.DB.RunValueLogGC(): This method triggers a value log garbage collection for a single log file. There are no guarantees that a call would result in space reclamation. Every run would rewrite at most one log file. So, repeated calls may be necessary. Please ensure that you call theDB.Purge…()methods first before invoking this method.
There are two public API methods DB.Backup() and DB.Load() which can be
used to do online backups and restores. Badger v0.9 provides a CLI tool
badger, which can do offline backup/restore. Make sure you have $GOPATH/bin
in your PATH to use this tool.
The command below will create a version-agnostic backup of the database, to a
file badger.bak in the current working directory
badger backup --dir <path/to/badgerdb>
To restore badger.bak in the current working directory to a new database:
badger restore --dir <path/to/badgerdb>
See badger --help for more details.
If you have a Badger database that was created using v0.8 (or below), you can
use the badger_backup tool provided in v0.8.1, and then restore it using the
command above to upgrade your database to work with the latest version.
badger_backup --dir <path/to/badgerdb> --backup-file badger.bak
Badger records metrics using the expvar package, which is included in the Go standard library. All the metrics are documented in y/metrics.go file.
expvar package adds a handler in to the default HTTP server (which has to be
started explicitly), and serves up the metrics at the /debug/vars endpoint.
These metrics can then be collected by a system like Prometheus, to get
better visibility into what Badger is doing.
- Introducing Badger: A fast key-value store written natively in Go
- Make Badger crash resilient with ALICE
- Badger vs LMDB vs BoltDB: Benchmarking key-value databases in Go
- Concurrent ACID Transactions in Badger
Badger was written with these design goals in mind:
- Write a key-value database in pure Go.
- Use latest research to build the fastest KV database for data sets spanning terabytes.
- Optimize for SSDs.
Badger’s design is based on a paper titled WiscKey: Separating Keys from Values in SSD-conscious Storage.
| Feature | Badger | RocksDB | BoltDB |
|---|---|---|---|
| Design | LSM tree with value log | LSM tree only | B+ tree |
| High Read throughput | Yes | No | Yes |
| High Write throughput | Yes | Yes | No |
| Designed for SSDs | Yes (with latest research 1) | Not specifically 2 | No |
| Embeddable | Yes | Yes | Yes |
| Sorted KV access | Yes | Yes | Yes |
| Pure Go (no Cgo) | Yes | No | Yes |
| Transactions | Yes, ACID, concurrent with SSI3 | Yes (but non-ACID) | Yes, ACID |
| Snapshots | Yes | Yes | Yes |
| TTL support | Yes | Yes | No |
1 The WISCKEY paper (on which Badger is based) saw big wins with separating values from keys, significantly reducing the write amplification compared to a typical LSM tree.
2 RocksDB is an SSD optimized version of LevelDB, which was designed specifically for rotating disks. As such RocksDB's design isn't aimed at SSDs.
3 SSI: Serializable Snapshot Isolation. For more details, see the blog post Concurrent ACID Transactions in Badger
We have run comprehensive benchmarks against RocksDB, Bolt and LMDB. The benchmarking code, and the detailed logs for the benchmarks can be found in the badger-bench repo. More explanation, including graphs can be found the blog posts (linked above).
Below is a list of public, open source projects that use Badger:
- Dgraph - Distributed graph database.
- go-ipfs - Go client for the InterPlanetary File System (IPFS), a new hypermedia distribution protocol.
- 0-stor - Single device object store.
If you are using Badger in a project please send a pull request to add it to the list.
- My writes are really slow. Why?
Are you creating a new transaction for every single key update? This will lead
to very low throughput. To get best write performance, batch up multiple writes
inside a transaction using single DB.Update() call. You could also have
multiple such DB.Update() calls being made concurrently from multiple
goroutines.
- I don't see any disk write. Why?
If you're using Badger with SyncWrites=false, then your writes might not be written to value log
and won't get synced to disk immediately. Writes to LSM tree are done inmemory first, before they
get compacted to disk. The compaction would only happen once MaxTableSize has been reached. So, if
you're doing a few writes and then checking, you might not see anything on disk. Once you Close
the database, you'll see these writes on disk.
- Which instances should I use for Badger?
We recommend using instances which provide local SSD storage, without any limit on the maximum IOPS. In AWS, these are storage optimized instances like i3. They provide local SSDs which clock 100K IOPS over 4KB blocks easily.
- Are there any Go specific settings that I should use?
We highly recommend setting a high number for GOMAXPROCS, which allows Go to observe the full IOPS throughput provided by modern SSDs. In Dgraph, we have set it to 128. For more details, see this thread.
- Please use discuss.dgraph.io for questions, feature requests and discussions.
- Please use Github issue tracker for filing bugs or feature requests.
- Join
.
- Follow us on Twitter @dgraphlabs.
