Skip to content

ArmPkg Profiling

Jordan Justen edited this page Nov 10, 2014 · 2 revisions

We will take the ARM Versatile Express TC2 (big.LITTLE test chip) as an example in this page.

1. Build UEFI in Release build & Copy the binary to the board. See the instructions in this wiki page

2. Identify the start and end point of your trace. Example on TC2, we want to measure from the start of UEFI at 0xB0000000 - defined into ArmVExpress-CTA15-A7.fdf

[FD.ARM_VEXPRESS_CTA15A7_EFI]
BaseAddress   = 0xB0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in remapped DRAM.
Size          = 0x000B0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device

... until the start of Linux.
To identfy where we will start Linux we need to load the symbol of the BDS.
So start UEFI a first time on the target up to the Boot menu.

Load all the symbols with DS-5 (symbols for Pre-EFI and UEFI phases):

source "/home/olivier/tianocore/ArmPlatformPkg/Scripts/Ds5/cmd_load_symbols.py" -f (0xB0000000,0x000B0000) -m (0x80000000,0x40000000) -v -a
Save the output into a file and replace the entry line to make DS-5 command line. Example:

From:

Add symbols of /home/olivier/tianocore/Build/ArmVExpress-CTA15-A7/RELEASE_GCC48/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll at 0xb0000180
Add symbols of /home/olivier/tianocore/Build/ArmVExpress-CTA15-A7/RELEASE_GCC48/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll at 0xbfd62240
Add symbols of /home/olivier/tianocore/Build/ArmVExpress-CTA15-A7/RELEASE_GCC48/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll at 0xbfd14240
(...)
To:
add-symbol-file /home/olivier/tianocore/Build/ArmVExpress-CTA15-A7/RELEASE_GCC48/ARM/ArmPlatformPkg/PrePi/PeiMPCore/DEBUG/ArmPlatformPrePiMPCore.dll 0xb0000180
add-symbol-file /home/olivier/tianocore/Build/ArmVExpress-CTA15-A7/RELEASE_GCC48/ARM/MdeModulePkg/Core/Dxe/DxeMain/DEBUG/DxeCore.dll 0xbfd62240
add-symbol-file /home/olivier/tianocore/Build/ArmVExpress-CTA15-A7/RELEASE_GCC48/ARM/ArmPkg/Drivers/CpuDxe/CpuDxe/DEBUG/ArmCpuDxe.dll 0xbfd14240
(...)
Save the file into symbols.ds

Go to the assembly view of 'StartLinux'. Find where we start Linux and set a hardware breakpoint at this location. Image:uefi-profile1.png

Set a hardware breakpoint at the start of UEFI:

hbreak -p *S:0xB0000000

4. After disconnecting the debugger, restart the ARM Versatile Express.

5. Setting up DS-5 for DSTREAM trace with UEFI
This tutorial assumes you have already set up DS-5 for hardware debugging UEFI. If you haven't, help can be found here.

Ensure that your DSTREAM's debug probe is connected via a Mictor-38 to the target's trace port. This is in addition to the JTAG connection.

6. Open the Debug Configurations menu and from there open the DTSL Options window: Image:uefi-profile2.png In the Trace Capture tab, select "DSTREAM 4GB Trace Buffer". The other settings are optional. Image:uefi-profile3.png

In the Core Trace tab, select "Enable core trace", "Enable core trace", for each core you want to trace, and optionally "Cycle accurate trace". Image:uefi-profile4.png

On TC2, you should now be in the ARM Boot Monitor Menu.
Image:uefi-profile5.png

7. Connect the debugger.

8. Enable your two hardware breakpoints (the start and stop of your trace).

9. Load all the symbols (ie: 'source symbols.ds'). Symbols must be loaded before starting the acquisition.

10. Resume the execution. Start UEFI by typing:

flash run uefi
Program execution should stop at address 0xB0000000.

11. Clear the trace and resume the execution.

UEFI will now boot. As soon as you enter into the Boot Menu press the boot entry (another alternative would be to automatically start Linux by setting PcdTimeout... to 0). Program execution should stop again when reaching the breakpoint you added in stop address. Image:uefi-profile6.png

Results

After some post-processing here are the list of the 20 functions that consume the more cycles on the UEFI Firmware of the ARM Versatile Express TC2.

Module Name / Function Name Cycle Percentage Count
ArmPlatformPrePiMPCore.dll/LzmaDec_DecodeReal 1538397019 33% 9
ArmCpuDxe.dll/ArmCleanInvalidateDataCacheEntryBySetWay 1210112914 26% 18487296
ArmPlatformBds.dll/InternalMemCopyMem 557552792 12% 99
DxeCore.dll/InternalMemCopyMem 372182434 8% 26152
ArmPlatformPrePiMPCore.dll/InternalMemCopyMem 158259634 3% 65
ArmCpuDxe.dll/ArmV7AllDataCachesOperation 156004379 3% 18489420
VariableRuntimeDxe.dll/__aeabi_uread4 67701311 1% 68442
SerialDxe.dll/MmioRead32 49657481 1% 167543
DxeCore.dll/InternalMemCompareMem 48489155 1% 70456
HdLcdGraphicsDxe.dll/MmioRead32 28337835 0% 95824
DxeCore.dll/FwVolBlockReadBlock 27751950 0% 45740
HiiDatabase.dll/InternalMemCopyMem 21179285 0% 8105
ArmVeNorFlashDxe.dll/InternalMemCopyMem 14168462 0% 281
DxeCore.dll/FvCheck 12961574 0% 23193
DxeCore.dll/ReadUnaligned16 12397148 0% 27832
ArmCpuDxe.dll/UpdatePageEntries 11785691 0% 20544
DxeCore.dll/ProduceFVBProtocolOnBuffer 11522208 0% 14
HiiDatabase.dll/__aeabi_memcpy 9341275 0% 20710
DxeCore.dll/CoreSetInterruptState 8332436 0% 32373
ArmPlatformPrePiMPCore.dll/MmioRead32 8261530 0% 27246
Function Name Cycle Percentage COunt
LzmaDec_DecodeReal 1538397019 33% 9
ArmCleanInvalidateDataCacheEntryBySetWay 1215995571 26% 18504704
InternalMemCopyMem 1133754058 24% 36242
ArmV7AllDataCachesOperation 160028408 3% 18515535
MmioRead32 86717719 1% 292770
__aeabi_uread4 67707303 1% 68453
InternalMemCompareMem 52567407 1% 76317
FwVolBlockReadBlock 27751950 0% 45740
ReadUnaligned16 13271790 0% 29780
FvCheck 12961574 0% 23193
UpdatePageEntries 11785691 0% 20544
ProduceFVBProtocolOnBuffer 11522208 0% 14
__aeabi_memcpy 9399629 0% 20814
CoreSetInterruptState 8332436 0% 32373
VariableWriteServiceInitialize 7058548 0% 64019
CompareGuid 6685126 0% 141296
IsErasedFlashBuffer 6550933 0% 1
InternalMemSetMem32 6450910 0% 1800
CoreRestoreTpl 6072718 0% 15192
NarrowGlyphToBlt 5892173 0% 20809
This is based on SVN rev15539 (2014-05-19).
Clone this wiki locally