MAAPS - Machine Access And Payments System
- Raspberry PI
- Raspberry 3.5 inch Touch Display https://www.amazon.de/dp/B07YV5WYM3
- RFID card reader https://www.amazon.de/dp/B074S9FZC5
- Raspberry Pi Relay Board https://www.amazon.de/dp/B01FZ7XLJ4
- Buchsenleiste extra hoch https://www.amazon.de/dp/B07YDKX8SR/
- Jumper Wire Female-Female 10cm https://www.amazon.de/dp/B07GJLCGG8/
| Pinheader | Raspi | Function | Hardware | Hint |
|---|---|---|---|---|
| Pin 1 | 3.3V | 3.3V | RFID Pin 1 | Löten, Pin belegt von LCD |
| Pin 34 | GND | GND | RFID Pin 3 | |
| Pin 35 | GPIO 19 | MISO | RFID Pin 5 | |
| Pin 36 | GPIO 16 | CS0 | RFID Pin 8 | |
| Pin 38 | GPIO 20 | MOSI | RFID Pin 6 | |
| Pin 40 | GPIO 21 | SCLK | RFID Pin 7 | |
| Pin 31 | GPIO 6 | Relais 3 | Relais CH3 | |
| Pin 33 | GPIO 13 | Relais 2 | Relais CH2 | |
| Pin 37 | GPIO 26 | Relais 1 | Relais CH1 | Jumper auf Relais board |
Add devices to setup/devices.csv, edit setup/wpa_supplicant.conf to match your wlan.
python3 setup.py serversetup
On first install login to server now, go to /home/{PI_USERNAME}/MAAPS/server and run
python3 manage.py createsuperuser
to add your first user. Open the user admin page https://SERVERIP/webif/user/list, add firstname and lastname to admin user and save. Open the django admin page at https://SERVERIP/admin/, open the "Tokens" page and get the token identifier for admin (for example U:admin;4c31a8d19b95a7dfe85c)
Install your first point of sale
python3 setup.py install <POS_IP>
After that, we must write our first admin RFID card. Login to the first POS, go to /home/{PI_USERNAME}/MAAPS/client/. Use the token you got from the token admin page
python3 hardware.py write "YOUR_ADMIN_TOKEN_HERE"
After your first card was created, you can login on the POS with this card and create additional cards.