PlatformIO GD32F103xx series test

DO NOT USE

This repository is outdated since a new project was started that supports GigaDevice (a lot of them) in a much much better way!

Read through platformio/platformio-core#3927 (comment)

Description

Test project for integrating the Standard Peripheral Library (SPL) of GigaDevice GD32F103xx series chips with PlatformIO.

SPL framework package

This project uses a customly created framework-spl version by specifyingg

[env]
; globally override framework-spl for all environments.
platform_packages = 
    maxgerhardt/framework-spl@2.10300.0

in the platformio.ini.

This framework-spl version contains GD32F1x0_Firmware_Library_v3.1.0 (to support htis GD32F130) as well as GD32F10x_Firmware_Library_V2.1.2 (to support e.g., GD32F103).

It is not needed to manually modify ~/.platformio/packages/framework-spl anymore.

Supported boards

Only GD32F103RCT6 at the moment. Other boards need a new board definition.

Exporting for a IDE.

If using VSCoede, just "Open Project" and point to this platformio.ini. Otherwise use the console commands.

pio init --ide=<ide>

see docs.

Compilation

If using VSCode, the normal project tasks (Build, Upload, ..) should work as normal.

From the commandline, use pio run and pio run -t upload respectively.