Performance limit for Xiaomi with Qualcomm Gen 1 CPU

Limit CPU and GPU performance to desired level on Xiaomi devices with Qualcomm Gen 1 CPU

With max power limit temperature remains below 50(C) degrees and stability is more than 99% in stress tests!

Tested on Xiaomi 12 Pro Global, Android 13, Xiaomi.eu 14.0.14.0

Confirmed to be working on Xiaomi 12, Xiaomi 12 Pro.

Setup

Download and install the module. See Releases.

Configuration

Config file location: /sdcard/.perf-limit-magisk/config.prop

Note: .perf-limit-magisk is a hidden folder.

No need to reboot the devices after making changes to the config! Check magisk logs after making updating the config file. Your changes will be reflected within 20 seconds.

cpu_gpu_limit

cpu_gpu_limit

• 0 - Disable limit completely
• 1 - Low GPU limit. CPU 1075200/1881600/1728000 (device is a bit less hot)
• 2 - Low GPU limit. CPU 1075200/1324800/1171200 (same as 1 but with lower CPU freqs)
• 3 - Average GPU limit. CPU 1075200/1881600/1728000 (device is less hot)
• 4 - Average GPU limit. CPU 1075200/1324800/1171200 (same as 3 but with lower CPU freqs)
• 5 - High GPU limit. CPU 1075200/1881600/1728000 (device is not hot)
• 6 - High GPU limit. CPU 1075200/1881600/1728000 (same as 5 but with lower CPU freqs)

Default: cpu_gpu_limit=4

Recommendations based on scenario:

• Levels 1 and 2 are not recommended.
• Average day to day usage: 3 or 4
• Navigation: 4 (low cpu values!)
• Long time gaming ONLY: 6 or 5 (the higher GPU limit the better)

NOTE: set value back from 5 or 6 to something lower after gaming as far as the driver will disable GPU limit completely in apps like camera!

Override max_pwrlevel

max_pwrlevel - Allow manually override CPU frequencies and GPU power limit. 0 - disable limit. 8 - max power limit. Reasonable values are 6, 7, 8.

Example: cpu_gpu_limit=7

Override policy0_scaling_max_freq

policy0_scaling_max_freq - I don't recommend to change this one unless you wan't to go below 1075200 for some reason.

CPUs 1-4. See /sys/devices/system/cpu/cpufreq/policy0/scaling_available_frequencies for available values.

Example: policy0_scaling_max_freq=960000

Override policy4_scaling_max_freq

policy4_scaling_max_freq - Recommended values are from 1324800 to 1881600. Should be HIGHER than policy7_scaling_max_freq!

CPUs 5-7. See /sys/devices/system/cpu/cpufreq/policy4/scaling_available_frequencies for available values.

Example: policy4_scaling_max_freq=1881600

Override policy7_scaling_max_freq

policy7_scaling_max_freq - Recommended values are from 1171200 to 1728000. Should be LOWER than policy4_scaling_max_freq!

CPU 8. See /sys/devices/system/cpu/cpufreq/policy7/scaling_available_frequencies for available values.

Example: policy7_scaling_max_freq=1728000

Verbose logging

To enable verbose logging enable_log=true

Logs

Example log output:

perf-limit: start, waiting for /sdcard
perf-limit: Writing default config to ./config.prop
perf-limit: cpu_gpu_limit=1
perf-limit: current kgsl gpu value is '6'
perf-limit: current policy 0 value is '1075200'
...
perf-limit: perf-limit service is running...
perf-limit: applying new values:
perf-limit: updating kgsl gpu to '8'
perf-limit: updating policy 4 to '1881600'
...