mikenye/postfix

Postfix is Wietse Venema's excellent mail server.

This container attempts to simplify and streamline setting up inbound and outbound mail relays, to protect and enhance self hosted email servers (eg: Microsoft Exchange). However, if you find an alternate use, please let me know so I can add to "Deployment Recipes".

The container employs Postfix's Postscreen for enhanced protection.

Apart from basic email relaying, the container can optionally:

Implement up-to-date TLS/SSL security for SMTP connections
Perform email virus scanning with ClamAV for all inbound/outbound email
Implement DNSBLs for inbound email
Perform DKIM signing for all outbound email
Perform DKIM verification for all inbound email
Implement spf checking for inbound email
Implement greylisting for inbound email
Implement LDAP-based recipient verification for inbound email

The container is fully configured via environment variables - each service's configuration files built from environment variables on container start. It also supports some configuration files via volume mappings.

Currently supported docker architectures are linux/386, linux/amd64, linux/arm/v7 and linux/arm64.

Please note - docker hub cuts off this readme as it is quite long. To view the full readme click here.

Services

This container implement's the excellent s6-overlay for process supervision (and a bunch of other handy stuff).

Service Name	Description	When is it started
`postfix`	Runs postfix	Always
`clamav-milter`	Part of ClamAV. Runs the `clamav-milter` for scanning emails for virii.	If `ENABLE_CLAMAV` is set to `true`
`clamd`	Part of ClamAV. Runs `clamd`, the virus scanning engine for `clamav-milter`.	If `ENABLE_CLAMAV` is set to `true`
`freshclam`	Part of ClamAV. Runs `freshclam` on the schedule defined by `FRESHCLAM_CHECKS_PER_DAY` to keep the ClamAV database updated.	If `ENABLE_CLAMAV` is set to `true`
`opendkim`	Runs `opendkim` for DKIM signing/verification.	If `ENABLE_OPENDKIM` is set to `true`
`postgrey`	Runs `postgrey` for greylisting.	If `ENABLE_POSTGREY` is set to `true`
`postgrey_whitelist_update`	Runs daily. Fetches the latest system whitelist from https://postgrey.schweikert.ch/pub/postgrey_whitelist_clients, merges with any locally defined whitelist, and reloads `postgrey`.	If `ENABLE_POSTGREY` is set to `true`
`syslogd`	Present for `opendkim` and `postgrey` logging.	Always

Deployment Recipes

Wrap a Local Exchange Server

In this deployment recipe, two containers (mail_in and mail_out) are created.

mail_in is designed to sit between the internet and a local legacy Exchange server. It handles inbound email, and provides the following:

Uses postscreen to ensure the sending MTA is standards compliant
Uses DNSBLs as an initial anti-spam measure
Provides up-to-date TLS for incoming clients
Performs greylisting as another anti-spam measure
Performs SPF & DKIM verification
Performs various header/sender/recipient checks to make sure the message is valid
Performs recipient verification via LDAP to internal Active Directory
Scans the email for viruses with ClamAV
Forwards the email to the legacy Exchange server

mail_out is designed to sit between the local legacy Exchange server and the internet. It handles outbound email, and provides the following:

Provides up-to-date TLS for talking to external MTAs
Performs DKIM signing
Scans the email for viruses with ClamAV
Delivers the outgoing email

From a networking perspective:

The site's internet router is configured to NAT incoming connections on TCP port 25 through to the docker host running mail_in on port TCP 2525.
The site's Exchange server is configured to send email (via "smart host") to the docker host (which is hard-coded to TCP port 25)

An example docker-compose.yml file is follows:

version: '3.8'

volumes:
  queue_out:
    driver: local
  queue_in:
    driver: local
  certs:
    driver: local
  dkim:
    driver: local
  clamav_in:
    driver: local
  clamav_out:
    driver: local
  postgrey_in:
    driver: local
  tables_in:
    driver: local
  aliases_in:
    driver: local
  asupdata_in:
    driver: local
  logs_in:
    driver: local
  logs_out:
    driver: local

services:

  mail_out:
    image: mikenye/postfix
    container_name: mail_out
    restart: always
    logging:
      driver: "json-file"
      options:
        max-file: "10"
        max-size: "10m"
    ports:
      - "25:25"
    environment:
      TZ: "Australia/Perth"
      POSTMASTER_EMAIL: "postmaster@yourdomain.tld"
      POSTFIX_INET_PROTOCOLS: "ipv4"
      POSTFIX_MYORIGIN: "mail.yourdomain.tld"
      POSTFIX_PROXY_INTERFACES: "your.external.IP.address"
      POSTFIX_MYNETWORKS: "your.local.LAN.subnet/prefix"
      POSTFIX_MYDOMAIN: "yourdomain.tld"
      POSTFIX_MYHOSTNAME: "mail.yourdomain.tld"
      POSTFIX_MAIL_NAME: "outbound"
      POSTFIX_SMTPD_TLS_CHAIN_FILES: "/etc/postfix/certs/privkey.pem, /etc/postfix/certs/fullchain.pem"
      POSTFIX_SMTP_TLS_CHAIN_FILES: "/etc/postfix/certs/privkey.pem, /etc/postfix/certs/fullchain.pem"
      POSTFIX_SMTPD_TLS_SECURITY_LEVEL: "may"
      POSTFIX_SMTPD_TLS_LOGLEVEL: 1
      POSTFIX_REJECT_INVALID_HELO_HOSTNAME: "false"
      POSTFIX_REJECT_NON_FQDN_HELO_HOSTNAME: "false"
      POSTFIX_REJECT_UNKNOWN_HELO_HOSTNAME: "false"
      ENABLE_OPENDKIM: "true"
      OPENDKIM_SIGNINGTABLE: "/etc/mail/dkim/SigningTable"
      OPENDKIM_KEYTABLE: "/etc/mail/dkim/KeyTable"
      OPENDKIM_MODE: "s"
      OPENDKIM_INTERNALHOSTS: "your.local.LAN.subnet/prefix"
      OPENDKIM_LOGRESULTS: "true"
      OPENDKIM_LOGWHY: "true"
      ENABLE_CLAMAV: "true"
      CLAMAV_MILTER_REPORT_HOSTNAME: "mail.yourdomain.tld"
    volumes:
      - "certs:/etc/postfix/certs:ro"
      - "dkim:/etc/mail/dkim:rw"
      - "clamav_out:/var/lib/clamav:rw"
      - "queue_out:/var/spool/postfix:rw"
      - "logs_out:/var/log:rw"

  mail_in:
    image: mikenye/postfix
    container_name: mail_in
    restart: always
    logging:
      driver: "json-file"
      options:
        max-file: "10"
        max-size: "10m"
    dns:
      - 8.8.8.8
      - 8.8.4.4
    ports:
      - "2525:25"
    environment:
      TZ: "Australia/Perth"
      POSTMASTER_EMAIL: "postmaster@yourdomain.tld"
      POSTFIX_INET_PROTOCOLS: "ipv4"
      POSTFIX_MYORIGIN: "mail.yourdomain.tld"
      POSTFIX_PROXY_INTERFACES: "your.external.IP.address"
      POSTFIX_MYDOMAIN: "yourdomain.tld"
      POSTFIX_MYHOSTNAME: "mail.yourdomain.tld"
      POSTFIX_MAIL_NAME: "inbound"
      POSTFIX_SMTPD_TLS_CHAIN_FILES: "/etc/postfix/certs/privkey.pem, /etc/postfix/certs/fullchain.pem"
      POSTFIX_SMTP_TLS_CHAIN_FILES: "/etc/postfix/certs/privkey.pem, /etc/postfix/certs/fullchain.pem"
      POSTFIX_SMTPD_TLS_SECURITY_LEVEL: "may"
      POSTFIX_SMTPD_TLS_LOGLEVEL: 1
      POSTFIX_RELAYHOST: "exchange.server.IP.addr"
      POSTFIX_RELAY_DOMAINS: "yourdomain.tld,someotherdomain.tld"
      POSTFIX_DNSBL_SITES: "hostkarma.junkemailfilter.com=127.0.0.2, bl.spamcop.net, cbl.abuseat.org=127.0.0.2, zen.spamhaus.org"
      ENABLE_OPENDKIM: "true"
      OPENDKIM_MODE: "v"
      OPENDKIM_LOGRESULTS: "true"
      OPENDKIM_LOGWHY: "true"
      ENABLE_SPF: "true"
      ENABLE_CLAMAV: "true"
      CLAMAV_MILTER_REPORT_HOSTNAME: "mail.yourdomain.tld"
      ENABLE_POSTGREY: "true"
      ENABLE_LDAP_RECIPIENT_ACCESS: "true"
      POSTFIX_LDAP_SERVERS: "active.directory.server.IP,active.directory.server.IP"
      POSTFIX_LDAP_BIND_DN: "CN=mailrelay,OU=Service Accounts,OU=Users,DC=yourdomain,DC=tld"
      POSTFIX_LDAP_BIND_PW: "12345"
      POSTFIX_LDAP_SEARCH_BASE: "DC=yourdomain,DC=tld"
    volumes:
      - "certs:/etc/postfix/certs:ro"
      - "queue_in:/var/spool/postfix:rw"
      - "clamav_in:/var/lib/clamav:rw"
      - "postgrey_in:/etc/postgrey:ro"
      - "tables_in:/etc/postfix/tables:ro"
      - "aliases_in:/etc/postfix/local_aliases:ro"
      - "logs_in:/var/log:rw"

It is recommended to make your volume mounts somewhere you can access them, so you can edit files, load certificates, view logs easily, etc.

For example, you could map through to a known local path:

volumes:
  queue_out:
    driver: local
      type: 'none'
      o: 'bind'
      device: '/opt/mail/queue_out'
...

...or, another example useing NFS to a filer/server, eg:

volumes:
  queue_out:
    driver: local
      type: nfs
      o: addr=1.2.3.4,rw
      device: ":/vol/mail/queue_out"
...

Environment Variables

Container configuration

Environment Variable	Description
`ENABLE_CLAMAV`	Optional. Set to "true" to enable ClamAV. Default is "false".
`ENABLE_LDAP_RECIPIENT_ACCESS`	Optional. Enable LDAP-based recipient verification. See LDAP Recipient Verification section below.
`ENABLE_OPENDKIM`	Optional. Set to "true" to enable OpenDKIM. If OpenDKIM is enabled, the "OpenDKIM Configuration" variables below will need to be set. Default is "false".
`ENABLE_POSTGREY`	Optional. Set to "true" to enable postgrey. Default is "false".
`ENABLE_SPF`	Optional. Set to "true" to enable policyd-spf. Default is "false".
`POSTMASTER_EMAIL`	Required. Set to the email of your domain's postmaster. Example: `postmaster@domain.tld`.
`TZ`	Recommended. Set the timezone for the container. Default is `UTC`.

Syslog Configuration

Environment Variable	Description
`SYSLOG_PRIORITY`	Optional. Log only messages more urgent than `SYSLOG_PRIORITY`. `0` = Emergency, `1` = Alert, `2` = Critical, `3` = Error, `4` = Warning, `5` = Notice, `6` = Info (the default), `7` = Debug

Postfix Configuration

Environment Variable	Documentation Link
`POSTFIX_DNSBL_SITES`	See documentation link.
`POSTFIX_DNSBL_THRESHOLD`	See documentation link.
`POSTFIX_INET_PROTOCOLS`	See documentation link.
`POSTFIX_MAIL_NAME`	See documentation link.
`POSTFIX_MESSAGE_SIZE_LIMIT`	See documentation link.
`POSTFIX_MYDOMAIN`	See documentation link.
`POSTFIX_MYHOSTNAME`	See documentation link.
`POSTFIX_MYNETWORKS`	See documentation link.
`POSTFIX_MYORIGIN`	See documentation link.
`POSTFIX_PROXY_INTERFACES`	See documentation link.
`POSTFIX_REJECT_INVALID_HELO_HOSTNAME`	See documentation link.
`POSTFIX_REJECT_NON_FQDN_HELO_HOSTNAME`	See documentation link.
`POSTFIX_REJECT_UNKNOWN_HELO_HOSTNAME`	See documentation link.
`POSTFIX_REJECT_UNKNOWN_SENDER_DOMAIN`	See documentation link.
`POSTFIX_RELAY_DOMAINS`	See documentation link.
`POSTFIX_RELAYHOST_PORT`	Optional port argument for `POSTFIX_RELAYHOST`. Default is `25` so only need to change if you're `relayhost` is running on a different port.
`POSTFIX_RELAYHOST`	See documentation link.
`POSTFIX_SMTP_TLS_CHAIN_FILES`	See documentation link.
`POSTFIX_SMTPD_MILTERS`	Any milters given here are applied after DKIM & ClamAV. See documentation link.
`POSTFIX_SMTPD_RECIPIENT_RESTRICTIONS_PERMIT_SASL_AUTHENTICATED`	Set to `true` to include in `smtpd_recipient_restrictions`. See documentation link.
`POSTFIX_SMTPD_TLS_CERT_FILE`	See documentation link.
`POSTFIX_SMTPD_TLS_CHAIN_FILES`	See documentation link.
`POSTFIX_SMTPD_TLS_KEY_FILE`	See documentation link.
`POSTFIX_SMTPD_TLS_LOGLEVEL`	See documentation link.
`POSTFIX_SMTPD_TLS_SECURITY_LEVEL`	See documentation link.
`POSTFIX_SMTPD_USE_TLS`	See documentation link.
`POSTFIX_SMTPUTF8_ENABLE`	See documentation link.
`POSTFIX_CHECK_RECIPIENT_ACCESS_FINAL_ACTION`	If recipient checks are enabled (via `ENABLE_LDAP_RECIPIENT_ACCESS` and/or `recipient_access.hash`), this is the final action taken after all other checks. Default is `defer`. Usually should be set to either `defer` or `reject`. See documentation link.

Backwards-Compatibility Safety Net Options

Environment Variable	Documentation Link
`POSTFIX_SMTPD_RELAY_BEFORE_RECIPIENT_RESTRICTIONS`	See documentation link.

LDAP Recipient Verification

See "LDAP" section below.

If ENABLE_LDAP_RECIPIENT_ACCESS is enabled, the final smtpd_recipient_restrictions action becomes defer (from the default of permit).

Environment Variable	Documentation Link
`POSTFIX_LDAP_SERVERS`	Required. Comma separated list of LDAP servers.
`POSTFIX_LDAP_VERSION`	Optional. LDAP version. Default is `3` (which works with Active Directory).
`POSTFIX_LDAP_QUERY_FILTER`	Optional. LDAP query filter to find user/group emails. Default is `(&(
`POSTFIX_LDAP_SEARCH_BASE`	Required. The base DN in which to search for users/groups. eg: `DC=MyDomain,DC=tld`.
`POSTFIX_LDAP_BIND_DN`	Required. The account name to use to bind to the LDAP servers, specified in LDAP syntax, eg: `CN=svc-mailrelay,OU=Service Accounts,OU=Users,DC=MyDomain,DC=tld`.
`POSTFIX_LDAP_BIND_PW`	Required. The account password for the `POSTFIX_LDAP_BIND_DN` account.
`POSTFIX_LDAP_DEBUG_LEVEL`	Optional. If you're having problems, you can set this to `1` or higher.

OpenDKIM Configuration

Environment Variable	Detail
`OPENDKIM_DOMAIN`	Comma separated list of domains whose mail should be signed by this filter.
`OPENDKIM_INTERNALHOSTS`	Comma separated list of internal hosts whose mail should be signed rather than verified.
`OPENDKIM_KEYFILE`	Gives the location (within the container) of a PEM-formatted private key to be used for signing all messages.
`OPENDKIM_KEYTABLE`	Path to a key table. You do not need to include `refile:`. Can be used instead of `OPENDKIM_KEYFILE` & `OPENDKIM_SELECTOR` for multiple domains.
`OPENDKIM_LOGRESULTS`	Set to `true` for for logging of the results of evaluation of all signatures that were at least partly intact.
`OPENDKIM_LOGWHY`	Set to `true` for very detailed logging about the logic behind the filter’s decision to either sign a message or verify it.
`OPENDKIM_MODE`	Selects operating modes. The string is a concatenation of characters that indicate which mode(s) of operation are desired. Valid modes are s (signer) and v (verifier). The default is sv except in test mode (see the opendkim(8) man page) in which case the default is v. When signing mode is enabled, one of the following combinations must also be set: (a) Domain, KeyFile, Selector, no KeyTable, no SigningTable; (b) KeyTable, SigningTable, no Domain, no KeyFile, no Selector; (c) KeyTable, SetupPolicyScript, no Domain, no KeyFile, no Selector.
`OPENDKIM_SELECTOR`	Set to the selector specified when creating the Key File.
`OPENDKIM_SIGNINGTABLE`	Path to a signing table file. You do not need to include `refile:`. Can be used instead of `OPENDKIM_DOMAIN` for multiple domains.
`OPENDKIM_SUBDOMAINS`	Set to `true` to sign subdomains of those listed by the Domain parameter as well as the actual domains.

ClamAV Configuration

Environment Variable	Detail
`FRESHCLAM_CHECKS_PER_DAY`	Optional. Number of database checks per day. Default: `12` (every two hours).
`CLAMAV_MILTER_REPORT_HOSTNAME`	Optional. The hostname ClamAV Milter will report in the `X-Virus-Scanned` header. If unset, defaults to the container's hostname.
`CLAMAV_MILTER_ALLOWLIST`	Optional. Sets ClamAV Milter's `Whitelist` option.
`CLAMAV_CLAMD_PHISHING_SIGNATURES`	Optional. Overrides ClamAV Daemon's default setting for `PhishingSignatures`.
`CLAMAV_CLAMD_PHISHING_SCAN_URLS`	Optional. Overrides ClamAV Daemon's default setting for `PhishingScanURLs`.
`CLAMAV_CLAMD_PHISHING_ALWAYS_BLOCK_SSL_MISMATCH`	Optional. Overrides ClamAV Daemon's default setting for `PhishingAlwaysBlockSSLMismatch`.
`CLAMAV_CLAMD_PHISHING_ALWAYS_BLOCK_CLOAK`	Optional. Overrides ClamAV Daemon's default setting for `PhishingAlwaysBlockCloak`.
`CLAMAV_CLAMD_HEURISTIC_SCAN_PRECEDENCE`	Optional. Overrides ClamAV Daemon's default setting for `HeuristicScanPrecedence`.

Configuration Files

The following files can be optionally configured.

Postfix table files

If using postfix table files, it is recommened to place all files into a single directory, and map this directory through to the container at /etc/postfix/tables.

Table File (with respect to container)	Format	If this file is present...	After modifying...
`/etc/postfix/tables/client_access.cidr`	cidr	It is automatically added to postfix's `check_client_access`.	Run helper command `update_client_access` (see below)
`/etc/postfix/tables/dnsbl_reply.texthash`	texthash	It is automatically added to postfix's `postscreen_dnsbl_reply_map`.	Run helper command `update_dnsbl_reply` (see below)
`/etc/postfix/tables/header_checks.pcre`	pcre	It is automatically added to postfix's `header_checks`.	Run helper command `update_header_checks` (see below)
`/etc/postfix/tables/helo_access.hash`	hash	It is automatically added to postfix's `check_helo_access`.	Run helper command `update_helo_access` (see below)
`/etc/postfix/tables/milter_header_checks.pcre`	pcre	It is automatically added to postfix's `milter_header_checks`.	Run helper command `update_milter_header_checks` (see below)
`/etc/postfix/tables/postscreen_access.cidr`	cidr	It is automatically added to postfix's 'postscreen_access_list' (after `permit_mynetworks`).	Run helper command `update_postscreen_access` (see below)
`/etc/postfix/tables/sender_access.hash`	hash	It is automatically added to postfix's `check_sender_access`.	Run helper command `update_sender_access` (see below)
`/etc/postfix/tables/recipient_access.hash`	hash	It is automatically added to postfix's `check_recipient_access`, and the final `smtpd_recipient_restrictions` action becomes `defer` (from the default of `permit`).	Run helper command `check_recipient_access` (see below)

Postgrey whitelist files

For the format of this file, see the postgrey manpage.

Configuration file (with respect to container)	If this file is present...	After modifying...
`/etc/postgrey/postgrey_whitelist_clients.local`	It is merged with the regularly updated system whitelist.	Run helper command `update_postgrey_whitelist` (see below).

The system whitelist is downloaded from https://postgrey.schweikert.ch/pub/postgrey_whitelist_clients once every 24 hours if postgrey is enabled.

Local Aliases

The format of this file is as-per the /etc/aliases file.

Configuration file (with respect to container)	If this file is present...	After modifying...
`/etc/postfix/local_aliases/aliases`	It is merged with the system aliases file.	Run helper command `update_aliases` (see below).

The system aliases file maps postmaster, root, postfix and clamav through to the address specified by POSTMASTER_EMAIL.

Paths

Required to be mapped

Path	Access	Detail
`/var/spool/postfix`	`rw`	Required. Mail queue & postgrey database.

Optional

Path	Access	Detail
`/var/lib/clamav`	`rw`	ClamAV anti-virus database. Map if using ClamAV.
`/etc/postfix/local_aliases`	`rw`	A file named `aliases` can be placed in this folder. The contents of this file will be added to the container's `/etc/aliases` at startup. Map if you need to add entries to `/etc/aliases`.
`/etc/postfix/certs`	`ro`	Postfix TLS chain files should be placed in here. Map if using TLS/SSL.
`/etc/postgrey`	`ro`	Postgrey local whitelists should be placed in here. Map if using postgrey.
`/etc/postfix/tables`	`ro`	Postfix's tables should be placed in here. Map if you need to use any of the Postfix Table Files listed above.
`/etc/mail/dkim`	`rw`	DKIM private keys (and `KeyTable`/`SigningTable` files if used) to be placed here.

DKIM

Generating a DKIM key

When setting up DKIM, you can use this container to create your keys.

Change to a directory on the host that will hold the public & private keys.

cd /path/to/dkim/keys

Generate a key with the following command (replacing your.domain.name with your domain name):

docker run \
    --rm \
    -it \
    -v $(pwd):/workdir \
    --entrypoint opendkim-genkey \
    mikenye/postfix \
    --directory=/workdir \
    --bits=1024 \
    --selector=<selector> \
    --restrict \
    --domain=<yourdomain.tld>

There should now be two files in your current directory, <selector>.private and <selector>.txt. This directory should be mapped through to the container (I suggest at /etc/mail/dkim), and the full path of the <selector>.private file (with respect to the container's filesystem) should be passed to OPENDKIM_KEYFILE. The <selector> should be passed to OPENDKIM_SELECTOR.

If you have more than one domain to sign mail for, you can use KeyTable and SigningTable files.

The <selector>.txt files contain DNS records which should be added to yourdomain.tld's DNS.

As for a selector name, an example may be: “sales-201309-1024”. This example indicates that it belongs to the “sales” email stream, is intended to be rotated into active duty in September 2013 and references a 1024-bit key (reference).

For more information, see the OpenDKIM readme: http://opendkim.org/opendkim-README

LDAP

With LDAP-based recipient verification:

Before accepting email, when postfix receives an RCPT TO, it will query LDAP for the address given.
If LDAP finds an email address in your directory, the message will be accepted.
If LDAP does not find an email address in your directory, the message will be deferred (status code 450).

This is usually a good idea, because it saves resources on your internal mail server. For example, a client runs MS Exchange & Kaspersky Security for Mail Server. Kaspersky scans all mail that hits the Exchange server, regardless of whether or not there is a valid recipient for the email. This means that if mail is sent to a non-existent address, you have the overhead of:

The postfix container processing & scanning the email
Kaspersky scanning the email
Exchange processing the email, generating a bounce message
Exchange & postfix trying to deliver the bounce message

With recipient verification, the sender is given a deferral, and after some time they will get a bounce message.

If setting this up for the first time:

It is suggested to check the container log (grep for " 450 ") occasionaly to make sure there are no accidental deferrals.
If there are accidental referrals, or you have addresses that email should be accepted for that are not in your directory, you can add these to the recipient_access.hash file (see above). The next time the message delivery is attempted (because we are deferring, not rejecting), it should deliver properly.

See the Postfix LDAP Howto for more information.

Helper Commands

These commands can be executed in the context of the container, for example:

docker exec <container> <command>

Command	Purpose
`postfix reload`	Performs a `postfix reload` (should be done if SSL certs are updated, etc).

Reloading Postfix's table files

If you edit one of postfix's table files, you must run the appropriate helper command below before the new version of the table file will be active.

Command	Purpose
`update_aliases`	Rebuilds `/etc/aliases` within the container, and runs `newaliases`.
`update_client_access`	Rebuilds files used by `check_client_access`.
`update_dnsbl_reply`	Rebuilds files used by `postscreen_dnsbl_reply_map`.
`update_header_checks`	Rebuilds files used by `header_checks`.
`update_helo_access`	Rebuilds files used by `check_helo_access`.
`update_milter_header_checks`	Rebuilds files used by `milter_header_checks`.
`update_postgrey_whitelist`	Rebuilds files used by postgrey's `--whitelist-clients`.
`update_postscreen_access`	Rebuilds files used by `postscreen_access_list`.
`update_recipient_access`	Rebuilds files used by `check_recipient_access`.
`update_sender_access`	Rebuilds files used by `check_sender_access`.

Postfix's Order of Checks/Restrictions

postscreen_access_list:
1. permit_mynetworks - includes any networks set by the POSTFIX_MYNETWORKS environment variable
2. cidr:/etc/postfix/postscreen_access.cidr - includes any local entries added to /etc/postfix/tables/postscreen_access.cidr. If you are using fail2ban or similar, this is the file you can add your banned IPs to.
3. If POSTFIX_DNSBL_SITES is configured, postscreen performs DNSBL checks.
smtpd_helo_restrictions:
1. permit_mynetworks - includes any networks set by the POSTFIX_MYNETWORKS environment variable
2. check_helo_access hash:/etc/postfix/helo_access.hash - includes any local entries added to /etc/postfix/tables/helo_access.hash
3. reject_invalid_helo_hostname - unless the environment variable POSTFIX_REJECT_INVALID_HELO_HOSTNAME is set to false
4. reject_non_fqdn_helo_hostname - unless the environment variable POSTFIX_REJECT_NON_FQDN_HELO_HOSTNAME is set to false
5. reject_unknown_helo_hostname - unless the environment variable POSTFIX_REJECT_UNKNOWN_HELO_HOSTNAME is set to false
smtpd_recipient_restrictions:
1. permit_mynetworks - includes any networks set by the POSTFIX_MYNETWORKS environment variable
2. check_client_access cidr:/etc/postfix/client_access.cidr - includes any local entries added to /etc/postfix/tables/client_access.cidr
3. permit_sasl_authenticated - see: http://www.postfix.org/postconf.5.html#permit_sasl_authenticated. This is placed below check_client_access so that malicious actors can be blocked via client_access.cidr
4. check_sender_access hash:/etc/postfix/sender_access.hash - includes any local entries added to /etc/postfix/tables/header_checks.pcre
5. reject_unauth_destination - see: http://www.postfix.org/postconf.5.html#reject_unauth_destination. This is placed above more "expensive" checks to prevent wasting resources for mail that's going to be rejected.
6. If ENABLE_SPF is enabled, check_policy_service unix:private/policy - performs SPF checks.
7. reject_non_fqdn_recipient - see: http://www.postfix.org/postconf.5.html#reject_non_fqdn_recipient.
8. reject_non_fqdn_sender - see: http://www.postfix.org/postconf.5.html#reject_non_fqdn_sender.
9. reject_unknown_sender_domain - see: http://www.postfix.org/postconf.5.html#reject_unknown_sender_domain.
10. reject_unknown_recipient_domain - see: http://www.postfix.org/postconf.5.html#reject_unknown_recipient_domain.
11. If ENABLE_POSTGREY is enabled, check_policy_service inet:127.0.0.1:10023 - performs greylisting.
12. If ENABLE_LDAP_RECIPIENT_ACCESS is enabled, and/or if /etc/postfix/tables/recipient_access.hash exists, check_recipient_access ... - performs recipient address verification using LDAP and/or the recipient_access.hash file. The recipient_access.hash file is analysed first, allowing this file to override LDAP verification.
13. Finally:
- If check_recipient_access is used (see above), then: POSTFIX_CHECK_RECIPIENT_ACCESS_FINAL_ACTION (default: defer)
- Else: permit
smtpd_data_restrictions:
1. reject_unauth_pipelining - see: http://www.postfix.org/postconf.5.html#reject_unauth_pipelining
2. permit

After a message is queued, it is passed through milters:

If ENABLE_DKIM, the email is sent through opendkim. The email is signed/verified by DKIM.
If ENABLE_CLAMAV, the email is sent through clamav-milter. The email is dropped if a virus is detected.
If any additional milters are defined with POSTFIX_SMTPD_MILTERS, they are then applied.

Testing

To test your configuration, an expect script is included in the GitHub Repo.

The script requires expect and telnet.

The syntax of the file is as follows:

test_server.expect <mail_server> <port> <helo> <from> <to>

Where:

<mail_server> is the IP/hostname of the mail server
<port> is the port of the mail server
<helo> is the FQDN to identify as
<from> is the sender email
<to> is the recipient email

An email will be sent from <from>, to <to> with the subject Test email sent at <date/time>.

expect is used to wait for the server to respond properly between commands, to prevent the session from being terminated due to Postfix's reject_unauth_pipelining.

When setting this container up, it is recommended to:

For inbound mail relays, from an external server:
- Test normal operation - Test from an external email address, to an internal mail address.
- Test to ensure no open relay - Test from an internal email address, to an external mail address.
For outbound mail relays, from an internal server (as your outbound mail relay should not be accessable outside your LAN):
- Test normal operation - Test from an internal email address, to an external mail address.
For testing SPF/DKIM - there are online tools available, such as https://email-test.had.dnsops.gov (remember that this service is rate limited, so don't accidentally get banned by testing too much). Furthermore, you can send an email to a gmail address and then take a look at the headers when (if) the message arrives. Google performs SPF/DKIM/DMARC on all email.

Getting help

Please feel free to open an issue on the project's GitHub.

I also have a Discord channel, feel free to join and converse.

References

http://www.postfix.org/documentation.html: Postfix Documentation.
http://opendkim.org/opendkim-README: OpenDKIM Readme.
https://www.skelleton.net/2015/03/21/how-to-eliminate-spam-and-protect-your-name-with-dmarc/: A fantastic HOWTO (dated, but still very much relevant).
https://petervibert.com/wp/expect-smtp-script/: plagiarized their expect script and made some modifications for the testing script.

Name		Name	Last commit message	Last commit date
Latest commit History 395 Commits
.github		.github
rootfs		rootfs
testing		testing
.dockerignore		.dockerignore
.gitignore		.gitignore
Dockerfile		Dockerfile
README.md		README.md
deployment_recipe_wrap_exchange.drawio		deployment_recipe_wrap_exchange.drawio
deployment_recipe_wrap_exchange.png		deployment_recipe_wrap_exchange.png

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

mikenye/postfix

Services

Deployment Recipes

Wrap a Local Exchange Server

Environment Variables

Container configuration

Syslog Configuration

Postfix Configuration

Backwards-Compatibility Safety Net Options

LDAP Recipient Verification

OpenDKIM Configuration

ClamAV Configuration

Configuration Files

Postfix table files

Postgrey whitelist files

Local Aliases

Paths

Required to be mapped

Optional

DKIM

Generating a DKIM key

LDAP

Helper Commands

Reloading Postfix's table files

Postfix's Order of Checks/Restrictions

Testing

Getting help

References

About

Releases

Packages

Languages

mikekay1/docker-postfix

Folders and files

Latest commit

History

Repository files navigation

mikenye/postfix

Services

Deployment Recipes

Wrap a Local Exchange Server

Environment Variables

Container configuration

Syslog Configuration

Postfix Configuration

Backwards-Compatibility Safety Net Options

LDAP Recipient Verification

OpenDKIM Configuration

ClamAV Configuration

Configuration Files

Postfix table files

Postgrey whitelist files

Local Aliases

Paths

Required to be mapped

Optional

DKIM

Generating a DKIM key

LDAP

Helper Commands

Reloading Postfix's table files

Postfix's Order of Checks/Restrictions

Testing

Getting help

References

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages