Skip to content

Eclipse

Jump to bottom
ronso0 edited this page Oct 7, 2024 · 132 revisions

How to set up Eclipse for developing on Mixxx

Just some notes on how to setup Eclipse IDE for developing on Mixxx.

Set up mixxx source

The default location on Linux would be

~/eclipse-workspace/mixxx

This guide assumes you have already setup you personal GitHub repository as described in Using-Git.
From you terminal or git shell (Windows):

mkdir eclipse-workspace # if not already exists
cd eclipse-workspace
git clone https://github.com/YOUR-GITHUB-USER-NAME/mixxx.git
git remote add upstream https://github.com/mixxxdj/mixxx.git

Now have to setup the Mixxx source and manage to compile it via the command line, as outlined here:
Compiling-On-Linux or
Compiling-On-Windows or
Compiling-on-macOS
Depending on your computer this may take up to 60 min on the fist time.

Using CMake (Mixxx > 2.3)

To speed up compiling after switching branches make sure ccache is installed.

mkdir build/Debug #
cd build/Debug # 'Debug' is one of the default Eclipse build configurations
# DCMAKE_EXPORT_COMPILE_COMMANDS allows Eclipse to read includes from
# /build/Debug/compile_commands.json later on
cmake -DCMAKE_BUILD_TYPE=Debug -DCMAKE_EXPORT_COMPILE_COMMANDS:BOOL=ON ../..
cmake --build . -j4 # replace 4 with the number of CPU cores that can be utilized

Using Scons (Mixxx 2.2)

scons -j4 # replace 4 with the number of CPU cores that can be utilized

Test your build

./mixxx # run Mixxx
./mixxx_test # run the Mixxx tests

Install Eclipse (packages or source)

Of course, install Eclipse and CDT (C/C++ developer toolkit). Either simply from their homepage or use the packages for your operating system.

It is best to install the ready to use setup "Eclipse IDE for C/C++ Developers":

Or use the installer as described here

Or you might install the CDT into your existing eclipse

Ubuntu Packages to install (possibly outdated) would be:

  • eclipse
  • eclipse-cdt

The latest Eclipse 2018-9 requires Oracle JDK 8 This can be installed on Ubuntu like that:

sudo apt-get install default-jre
sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt-get install oracle-java8-installer
# Oracle JDK 8 is activated by default you can switch between your Java installations using
sudo update-alternatives --config java

Step-by-Step Setup

For Eclipse 2024-09

General:

  • Start Eclipse.
  • Window -> Preferences
  • Expand General -> Workspace -> Build
    • Check "Save automatically before manual build"
    • Uncheck "Build automatically"
  • Expand C/C++ -> Indexer
    • Skip files larger than 80 MB
    • Skip include files larger than 160 MB
    • Uncheck all indexer options
  • Expand C/C++ -> Build -> console
    • Limit console output = 10000
  • Verify Project Explorer is visible.
    • If not go to Window -> Show View -> Project Explorer
    • Close Welcome Window

For CMake builds (2.3 and newer):

  • Install cmake4eclipse via the Eclipse Marketplace
    • Help -> Eclipse Marketplace...
    • search for cmake4eclipse and press Install.
  • Follow the install wizard and restart Eclipse
  • File -> New -> Project... -> C/C++ -> C++ Project
    (!Not File -> New -> C/C++ Project)
    • select Cmake4eclipse Managed Build, click Next
    • Set Project Name to mixxx
    • Uncheck "Use default location"
    • Browse to your Mixxx source folder e.g. ~/eclipse-workspace/mixxx, click Okay, click Next
    • Check all build configurations you think you need. You can also configure that later on, so if you don't know yet, leave the defaults options checked (Debug, Default, Release)
    • click Finish
  • select mixxx in the Project Explorer
  • Project -> Properties -> Cmake4eclipse Build
    • Switch to Build Behavior tab
    • Check "Enable parallel builds" and select "Use optimal jobs"
    • Click "Apply"
  • Project -> Properties -> Cmake4eclipse Build

    • Switch to Cmake options tab

    • Set the Build Output Location to build/${ConfigName}
      Note: if you want to build out-of-tree, i.e. build is not in your source/workspace directory, you need to use "Create.." and 'Advanced' -> 'Link to folder in file system' and pick the build directory.

    • Click "Apply"

  • Project -> Properties -> C/C++ General -> Preprocessor...
    • Switch to Providers tab.
    • Uncheck all potentially checked providers and use only CMake Compilation DB.
    • Click "Apply"
    • Note: It is not strictly necesary, though: when configuring cmake manually (ie. outside Eclispe), the important flag is
      -DCMAKE_EXPORT_COMPILE_COMMANDS:BOOL=ON
    • click Apply and Close
  • Now Mixxx should build within Eclipse with "Build Project" (Hammer icon).
    • Alternative:
    • Project -> Clean Project
    • Project -> Build Project
  • Wait until the indexer has also finished
    • Now all Indexer based features should be available
  • Known issues:

Hint: (noticed with Eclipse 2023-06-R and cmake4eclipse 4.0.1) If you build from the command line and use compile_commands.json for include resolution make sure to use the same build system. The Eclipse 'Default build system' default is Ninja while cmake may use Unix Makefiles. Using the 'CMake Compilation DB' provider in Eclipse differing systems will results in the warning "mixxx/build/dir/compile_commands.json' does not exist!", and include resolution and indexer won't work.
Eclipse: -> Window -> C/C++ -> Cmake4eclipse -> General -> Default build system
Cmake: -G [build system]

For Scons builds (2.2):

  • File -> New -> Makefile Project with Existing Code

    • Set Project Name to mixxx.
    • Browse to your Mixxx folder e.g. ~/eclipse-workspace/mixxx.
    • Check only C++ language (uncheck C).
    • Select Toolchain for indexer setting = Linux GCC (this would be for a Linux host, substitute your OS as applicable).
    • Finish.

  • Project -> Properties -> C/C++ Build

    • Uncheck "Use default build command".
    • Build command
      • Linux scons faad=1 test=1
      • Mac scons stdlib=libc++ hss1394=0 mad=0 coreaudio=1 test=1

  • Switch to Behavior tab

    • Build: remove ''all''.
    • Clean: remove ''clean'' and set instead ''-c''.
    • Check "Enable parallel builds".

  • On Mac only: Expand C/C++ Build -> Environment

    • Add the following Variable-Value pairs: CFLAGS | -I/usr/local/include -I/usr/local/include/opus CXXFLAGS | -I/usr/local/include -I/usr/local/include/opus LDFLAGS | -L/usr/local/lib QTDIR | /<path to Qt install directory>/%VERSION%#eg /usr/local/Cellar/qt5/5.10.1 </code>

  • Replace %VERSION% with the folder name for your version of Qt.

  • You may also have to manually add to the system PATH setting to include, for example, /usr/local/bin and /usr/local/include. Do this the same way as the above. Separate individual paths with colons.

  • To build with clang (recommended) rather than gcc add the below: CC | clang CXX | clang++

  • Expand "C/C++ General" -> "Preprocessor Include Paths, Macros etc."

    • Select Providers Tab -> CDT GCC Build Output Parser
    • Set Compiler command pattern to (g?cc)|([gc]\+\+)|(clang)|([clang]\+\+)
    • Under 'Container to keep discovered entries' (you may need to expand the window for this to be visible) select 'Project (use when settings are the same for all files in the project)':

  • Select "Providers Tab" -> "CDT GCC Built-In Compiler settings"
    • Uncheck "Use global providers ..."
    • Edit the command to ${COMMAND} ${FLAGS} -std=c++11 -E -P -v -dD "${INPUTS}"
  • Note: The indexer should work after a full rebuild that allows Eclipse to parse all compiler arguments.
  • In the Project tree, right-click on the build folder and choose Properties
    • Check 'Exclude resource from build', Apply and Close
    • Repeat for the cache folder

Set up Run

  • Run -> Run configurations.
  • Select C/C++ Application.
  • Press "New launch configuration" button.
    • Main tab:
      • C/C++ Application = mixxx.
      • Disable auto build.
    • Arguments tab
      • Program arguments = --resourcePath res --developer
  • "Run" button for run Mixxx

Set up Debug

  • Run -> Debug configurations

  • Next step similar to "Setup run"

    • Arguments tab
      • Program arguments = --resourcePath res --developer --debugAssertBreak
    • For stepping through the Qt source, you need to place it in your workspace folder
    cd eclipse-workspace
apt-get source qtbase5-dev
ln -s qtbase-opensource-src-5.2.1+dfsg qt5 # adjust version
sudo apt-get install qtbase5-dbg

  • Non-Mac users should use GDB for debugging in Eclipse (GDB).

  • Your .gdbinit should be setup before

    dir ~/eclipse-workspace/qt5/src/corelib
dir ~/eclipse-workspace/qt5/src/corelib/io
dir ~/eclipse-workspace/qt5/src/corelib/tools
dir ~/eclipse-workspace/qt5/src/gui
dir ~/eclipse-workspace/qt5/src/gui/image
dir ~/eclipse-workspace/qt5/src/gui/kernel
dir ~/eclipse-workspace/qt5/src/network
dir ~/eclipse-workspace/qt5/src/sql
dir ~/eclipse-workspace/qt5/src/opengl

python
import sys 
sys.path.insert(0, '/home/<user_name>/eclipse-workspace')
from qt import register_qt_printers
register_qt_printers (None)
end

set print pretty 1
set charset UTF-8

  • copy Qt pretty printer files to /home/<user_name>/eclipse-workspace qt.py. helper.py.

  • "Debug" button for run Mixxx.

  • Mac users running OS X 10.9 Mavericks or later are recommended to use LLDB for debugging. In recent versions of OS X, it is difficult if not impossible to get GDB working properly in Eclipse. LLDB seems somewhat problematic from within Eclipse, so debugging may be better done via Terminal.

For git integration (in case of using a git clone of mixxx):

  • Project -> Team -> Share Project.
  • Select git.
  • Next -> Finish.

Additional hints

Setting $DISPLAY

Some can get error "Warning [Main]: mixxx: cannot connect to X server".

The general causes for this is that DISPLAY is not set in the environment. So, go to Project properties -> C/C++ Build -> Environment. Here you must add variable DISPLAY and set its value to ${DISPLAY}.

Enable full power of Eclipse

This was tested without the SCons plugin installed.

Eclipse indexer (Scons only)

To enable the full power of Eclipse indexer Eclipse needs to know all include files and symbols. Eclipse is able to discover path and symbols from the scons output. After a build, you can check it at

Project -> Properties -> C/C++ General -> Path and Symbols

by checking "Show built-in values"

This process does not always work perfectly. If the discovering fails, you can help things along by adding the required info manually:

Linux

  • Right click on the project -> Properties -> C/C++ General -> Path and Symbols -> Fill in tabs "Includes" and "Symbols".
  • Add the src/ folder in your workspace, and select "add to all languages" and "add to all configurations."
  • Add the lib/ folder. Again, add to all languages and configurations.
  • Also add /usr/include as a filesystem path.
  • Also add:
    • /usr/include/qt5/Qt
    • /usr/include/qt5/QtCore
    • /usr/include/qt5/QtWidgets
    • /usr/include/qt5/QtGui
    • /usr/include/qt5/QtTest
    • /usr/include/qt5/QtXml
    • /usr/include/qt5/QtSvg

After changing these settings, the index needs to be rebuilt. Eclipse will usually detect that changes have been made to Symbols settings and will rebuild the index on clicking Apply and Close. To do it manually:

Project -> Index -> Rebuild

Troubleshooting:

The indexer preferences can be set here:

Window -> Preferences -> C/C++ -> Indexer

You may set "Heap Size" to 20 % and "Absolute Limit" to 100 MB

macOS

  • Right click on the project -> Properties -> C/C++ General -> Paths and Symbols
  • Under the 'Includes' tabs, choose GNU C++ and add:
  • /usr/local/include
  • ${QTDIR}/include
  • ${QTDIR}/include/QtCharts
  • ${QTDIR}/include/QtConcurrent
  • ${QTDIR}/include/QtCore
  • ${QTDIR}/include/QtGui
  • ${QTDIR}/include/QtNetwork
  • ${QTDIR}/include/QtOpenGL
  • ${QTDIR}/include/QtScript
  • ${QTDIR}/include/QtScriptTools
  • ${QTDIR}/include/QtSql
  • ${QTDIR}/include/QtSvg
  • ${QTDIR}/include/QtTest
  • ${QTDIR}/include/QtWidgets
  • ${QTDIR}/include/QtXml

Note that the use of ${QTDIR} depends on you having set this variable under Project Properties > C/C++ Build > Environment

After changing these settings, the index needs to be rebuilt. Eclipse will usually detect that changes have been made and will rebuild the index on clicking Apply and Close. To do it manually:

Project -> Index -> Rebuild

Troubleshooting:

The indexer preferences can be set here:

Window -> Preferences -> C/C++ -> Indexer

Eclipse code formatter

You should also configure the code formatter to Mixxx code style

Right Click on the project -> Properties -> C/C++ General -> Formatter -> Configure workspace settings

  • New -> Profile name = Mixxx from Template K&R
  • Indentation = Spaces only
  • New Lines = check before ....

Other tweaks

You can improve the compile speed if you only enable required error parsers

  • Preferences -> C/C++ Build -> Settings -> Error Parsers

To see the whole build in the Console tab

  • Preferences -> C/C++ -> Build -> console
  • Limit console output = 10000

Mixxx This is the Mixxx Wiki - Wiki Home | Website | Manual | News

Mixxx Wiki

Mixxx is a free and open-source DJ software.

Wiki Home
Website

Users

Manual
Hardware Compatibility
Reporting Bugs
Getting Involved

Developers

Contribution Guidelines
Coding Guidelines
Using Git
Developer Guide
Creating Skins

Mapping Creators

Contributing Mappings
Mixxx Controls
MIDI Scripting
Components JS
HID Scripting

Clone this wiki locally