This role is still under active development.
Configure a RHEL 7 system to be DISA STIG compliant. All findings will be audited by default. Non-disruptive CAT I, CAT II, and CAT III findings will be corrected by default. Disruptive finding remediation can be enabled by setting rhel7stig_disruption_high
to yes
.
This role is based on RHEL 7 DISA STIG: Version 2, Rel 4 released on July 26, 2019.
RHEL 7 or CentOS 7 - Other versions are not supported.
passlib
>= 1.5 on the control node (1.6.5 is available in RHEL and CentOS as python-passlib
)
jmespath
on the control node (available in RHEL and CentOS as python2-jmespath
)
Name | Default Value | Description |
---|---|---|
rhel7stig_cat1_patch |
yes |
Correct CAT I findings |
rhel7stig_cat2_patch |
yes |
Correct CAT II findings |
rhel7stig_cat3_patch |
yes |
Correct CAT III findings |
rhel_07_###### |
see defaults/main.yml | Individual variables to enable/disable each STIG ID. |
rhel7stig_gui |
no |
Whether or not to run tasks related to auditing/patching the desktop environment |
rhel7stig_system_is_router |
no |
Run tasks that disable router functions. |
rhel7stig_antivirus_required |
no |
Run tasks related to Anit-Virus package installation. |
rhel7stig_av_package |
see defaults/main.yml | Anti-virus package(s) to install and service to start and enable. |
rhel7stig_time_service |
chronyd |
Set to ntpd or chronyd . |
rhel7stig_time_service_configs |
see defaults/main.yml | Time service packages and service configs. |
rhel7stig_firewall_service |
firewalld |
Set to firewalld or iptables . |
rhel7stig_vsftpd_required |
no |
If set to no , remove vsftpd . |
rhel7stig_tftp_required |
no |
If set to no , remove tftp client and server packages. |
rhel7stig_autofs_required |
no |
If set to no , disable autofs service. |
rhel7stig_kdump_required |
no |
If set to no , disable kdump service. |
rhel7stig_snmp_community |
Endgam3Ladyb0g |
SNMP community string that will replace public and private in snmpd.conf . |
rhel7stig_bootloader_password |
Boot1tUp! |
GRUB2 bootloader password. This should be stored in an Ansible Vault. |
rhel7stig_boot_superuser |
root |
Used to set the boot superuser in the GRUB2 config. |
rhel7stig_boot_password_config |
see defaults/main.yml | GRUB2 bootloader password configuration. |
rhel7stig_aide_cron |
see defaults/main.yml | AIDE Cron settings |
rhel7stig_maxlogins |
10 |
Set maximum number of simultaneous system logins (RHEL-07-040000) |
rhel7stig_logon_banner |
see defaults/main.yml | Logon banner displayed when logging in to the system. Defaults to nicely formatted standard logon banner. |
rhel7stig_password_complexity |
see below for specific settings | Dictionary of password complexity settings |
rhel7stig_password_complexity.ucredit |
-1 |
Minimum number of upper-case characters to be set in a new password - expressed as a negative number. |
rhel7stig_password_complexity.lcredit |
-1 |
Minimum number of lower-case characters to be set in a new password - expressed as a negative number. |
rhel7stig_password_complexity.dcredit |
-1 |
Minimum number of numeric characters to be set in a new password - expressed as a negative number. |
rhel7stig_password_complexity.ocredit |
-1 |
Minimum number of special characters to be set in a new password - expressed as a negative number. |
rhel7stig_password_complexity.difok |
8 |
Minimum number of characters in new password that must not be present in the old password. |
rhel7stig_password_complexity.minclass |
4 |
Minimum number of required classes of characters for the new password. (digits, upper, lower, other) |
rhel7stig_password_complexity.maxrepeat |
3 |
Maximum number of allowed same consecutive characters in a new password. |
rhel7stig_password_complexity.maxclassrepeat |
4 |
Maximum number of allowed same consecutive characters in the same class in the new password. |
rhel7stig_password_complexity.minlen |
15 |
Minimum number of characters in a new password. |
rhel7stig_shell_session_timeout |
file: /etc/profile timeout: 600 |
Dictionary of session timeout setting and file (TMOUT setting can be set in multiple files) |
None
- hosts: servers
roles:
- role: rhel7-stig
when:
- ansible_os_family == 'RedHat'
- ansible_distribution_major_version | version_compare('7', '=')
MIT