Skip to content

A configurable server for mocking/stubbing external systems during development.

Notifications You must be signed in to change notification settings

mrak/stubby4node

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Build Status NPM version

stubby4node

A configurable server for mocking/stubbing external systems during development.

stubby takes endpoint descriptors in the form of a YAML or JSON file that tell it how to respond to incoming requests. For each incoming request, configured endpoints are checked in-order until a match is found.

Table of Contents

Installation

via npm

npm install -g stubby

This will install stubby as a command in your PATH. Leave off the -g flag if you'd like to use stubby as an embedded module in your project.

via source

git clone https://github.com/mrak/stubby4node.git
cd stubby4node
npm start -- <stubby args>

Supported Runtimes

  • node.js - latest and currently supported LTS versions

Development is on x86-64 Linux.

Starting the Server(s)

Some systems require you to sudo before running services on certain ports (like 80)

[sudo] stubby

Command-line Switches

stubby [-a <port>] [-c <file>] [-d <file>] [-h] [-k <file>] [-l <hostname>] [-p <file>] [-q]
       [-s <port>] [-t <port>] [-v] [-w] [-H]

-a, --admin <port>             Port for admin portal. Defaults to 8889.
-c, --cert <file>              Certificate file. Use with --key.
-d, --data <file>              Data file to pre-load endoints. YAML or JSON format.
-h, --help                     This help text.
-k, --key <file>               Private key file. Use with --cert.
-l, --location <hostname>      Hostname at which to bind stubby.
-q, --quiet                    Prevent stubby from printing to the console.
-p, --pfx <file>               PFX file. Ignored if used with --key/--cert
-s, --stubs <port>             Port for stubs portal. Defaults to 8882.
-t, --tls <port>               Port for https stubs portal. Defaults to 7443.
-v, --version                  Prints stubby's version number.
-w, --watch                    Auto-reload data file when edits are made.
-H, --case-sensitive-headers   Do not normalize response headers to lower-case.

When used from the command-line, stubby responds to the SIGHUP signal to reload its configuration.

Endpoint Configuration

This section explains the usage, intent and behavior of each property on the request and response objects.

Here is a fully-populated, unrealistic endpoint:

-  request:
      url: ^/your/awesome/endpoint$
      method: POST
      query:
         exclamation: post requests can have query strings!
      headers:
         content-type: application/xml
      post: >
         <!xml blah="blah blah blah">
         <envelope>
            <unaryTag/>
         </envelope>
      file: tryMyFirst.xml
   response:
    - status: 200
      latency: 5000
      headers:
         content-type: application/xml
         server: stubbedServer/4.2
      body: >
         <!xml blah="blah blah blah">
         <responseXML>
            <content></content>
         </responseXML>
      file: responseData.xml
    - status: 200
      body: "Haha!"

request

This object is used to match an incoming request to stubby against the available endpoints that have been configured.

url (required)

  • is a full-fledged regular expression
  • This is the only required property of an endpoint.
  • signify the url after the base host and port (i.e. after localhost:8882).
  • any query parameters are stripped (so don't include them, that's what query is for).
    • /url?some=value&another=value becomes /url
  • no checking is done for URI-encoding compliance.
    • If it's invalid, it won't ever trigger a match.

This is the simplest you can get:

-  request:
      url: /

A demonstration using regular expressions:

-  request:
      url: ^/has/to/begin/with/this/

-  request:
      url: /has/to/end/with/this/$

-  request:
      url: ^/must/be/this/exactly/with/optional/trailing/slash/?$

method

  • defaults to GET.
  • case-insensitive.
  • can be any of the following:
    • HEAD
    • GET
    • POST
    • PUT
    • DELETE
    • etc.
-  request:
      url: /anything
      method: GET
  • it can also be an array of values.
-  request:
      url: /anything
      method: [GET, HEAD]

-  request:
     url: ^/yonder
     method:
       -  GET
       -  HEAD
       -  POST

query

  • values are full-fledged regular expressions

  • if omitted, stubby ignores query parameters for the given url.

  • a yaml hashmap of variable/value pairs.

  • allows the query parameters to appear in any order in a uri

  • The following will match either of these:

    • /with/parameters?search=search+terms&filter=month
    • /with/parameters?filter=month&search=search+terms
-  request:
     url: ^/with/parameters$
     query:
       search: search terms
       filter: month

NOTE: repeated querystring keys (often array representations) will have their values converted to a comma-separated list.

/url?array=one&array=two

will be matched by:

- request:
    url: ^/url$
    query:
      array: one,two

post

  • is a full-fledged regular expression
  • if omitted, any post data is ignored.
  • the body contents of the server request, such as form data.
-  request:
      url: ^/post/form/data$
      post: name=John&email=john@example.com

file

  • if supplied, replaces post with the contents of the locally given file.
    • paths are relative from where the --data file is located
  • if the file is not found when the request is made, falls back to post for matching.
  • allows you to split up stubby data across multiple files
-  request:
      url: ^/match/against/file$
      file: postedData.json
      post: '{"fallback":"data"}'

postedData.json

{"fileContents":"match against this if the file is here"}
  • if postedData.json doesn't exist on the filesystem when /match/against/file is requested, stubby will match post contents against {"fallback":"data"} (from post) instead.

json

  • not used if post or file are present.
  • will be parsed into a JavaScript object.
  • allows you to specify a JSON string that will be deeply compared with a JSON request

Although not required, it is recommended to also specify a application/json header requirement.

-  request:
      url: ^/match/against/jsonString$
      headers:
         content-type: application/json
      json: '{"key1":"value1","key2":"value2"}'

JSON strings may contain "key": "value" pairs in any order: {"key1":"value1", "key2":"value2"} is equivalent to {"key2":"value2", "key1":"value1"}

headers

  • values are full-fledged regular expressions
  • if omitted, stubby ignores headers for the given url.
  • case-insensitive matching of header names.
  • a hashmap of header/value pairs similar to query.

The following endpoint only accepts requests with application/json post values:

-  request:
      url: /post/json
      method: post
      headers:
         content-type: application/json

response

Assuming a match has been made against the given request object, data from response is used to build the stubbed response back to the client.

ALSO: The response property can also be a yaml sequence of responses that cycle as each request is made.

ALSO: The response property can also be a url (string) or sequence of object/urls. The url will be used to record a response object to be used in calls to stubby. When used this way, data from the request portion of the endpoint will be used to assemble a request to the url given as the response.

- request:
    url: /single/object
  response:
    status: 204

- request:
    url: /single/url/to/record
  response: http://example.com

- request:
    url: /object/and/url/in/sequence
  response:
  - http://google.com
  - status: 200
    body: 'second hit'

status

  • the HTTP status code of the response.
  • integer or integer-like string.
  • defaults to 200.
-  request:
      url: ^/im/a/teapot$
      method: POST
   response:
      status: 420

body

  • contents of the response body
  • defaults to an empty content body
-  request:
      url: ^/give/me/a/smile$
   response:
      body: ':)'

file

  • similar to request.file, but the contents of the file are used as the body.
-  request:
      url: /
   response:
      file: extremelyLongJsonFile.json

headers

  • similar to request.headers except that these are sent back to the client.
-  request:
      url: ^/give/me/some/json$
   response:
      headers:
         content-type: application/json
      body: >
         [{
            "name":"John",
            "email":"john@example.com"
         },{
            "name":"Jane",
            "email":"jane@example.com"
         }]

latency

  • time to wait, in milliseconds, before sending back the response
  • good for testing timeouts, or slow connections
-  request:
      url: ^/hello/to/jupiter$
   response:
      latency: 800000
      body: Hello, World!

Dynamic Token Interpolation

While stubby is matching request data against configured endpoints, it is keeping a hash of all regular expression capture groups along the way. These capture groups can be referenced in response data. Here's an example

-  request:
      method: [GET]
      url: ^/account/(\d{5})/category/([a-zA-Z]+)
      query:
         date: "([a-zA-Z]+)"
      headers:
         custom-header: "[0-9]+"

   response:
      status: 200
      body: Returned invoice number# <% url[1] %> in category '<% url[2] %>' on the date '<% query.date[1] %>', using header custom-header <% headers.custom-header[0] %>

The url regex ^/account/(\d{5})/category/([a-zA-Z]+) has two defined capturing groups: (\d{5}) and ([a-zA-Z]+). The query regex has one defined capturing group: ([a-zA-Z]+).

Although the headers do not have capturing groups defined explicitly (no regex sections within parenthesis), the individual headers' fully-matched value is still accessible in a template (see Capture group IDs).

Templating body and file

The response.body can have token interpolations following the format of < %PROPERTY_NAME[CAPTURING_GROUP_ID] %>. If it is a token that corresponds to headers or query member matches, then the token structure would be `<% HEADERS_OR_QUERY.[KEY_NAME][CAPTURING_GROUP_ID] %>.

  response:
    body: The "content-type" header value was <% headers.content-type[0] %>.

NOTE: If you are using the file property for your responses, keep in mind that the both the file name and contents are interpolated. In other words, the <% ... %> will appear in the files' contents as well as on the line in your configuration that has response.file

Capture group IDs

The CAPTURING_GROUP_ID is determined by the regular expression used. The index of 0 will be the full-text that matches the regular expression.

Capture groups start at index 1 and correspond to the usage of parentheses.

Let's demonstrate with the example from above:

- request:
    url: ^/account/(\d{5})/category/([a-zA-Z]+)

If the incoming url is /account/54/category/users, the following would be the capture groups:

<% url[0] %> -> /account/54/categroy/users
<% url[1] %> -> 54
<% url[2] %> -> users

Let's take a more complicated example with sub-groups as captures:

- request:
    url: ^/resource/(([a-z]{3})-([0-9]{3}))$

If the incoming url is /resource/abc-123, the capture groups would be:

<% url[0] %> -> /resource/abc-123
<% url[1] %> -> abc-123
<% url[2] %> -> abc
<% url[3] %> -> 123

Troubleshooting

  • Make sure that the regex you used in your stubby configuration actually does what it supposed to do. Validate that it works via the node REPL (or similar) before using it in stubby
  • Make sure that the regex has capturing groups for the parts of regex you want to capture as token values. In other words, make sure that you did not forget the parentheses within your regex if your token IDs start from 1
  • Make sure that you are using token ID zero when wanting to use full regex match as the token value
  • Make sure that the token names you used in your template are correct: check that property name is correct, capturing group IDs, token ID of the full match, the <% and %>

The Admin Portal

The admin portal is a RESTful(ish) endpoint running on localhost:8889. Or wherever you described through stubby's options.

Supplying Endpoints to Stubby

Submit POST requests to localhost:8889, PUT requests to localhost:8889/:id*, or load a data-file (-d) with the following structure for each endpoint:

  • request: describes the client's call to the server
    • method: GET/POST/PUT/DELETE/etc.
    • url: the URI regex string.
    • query: a key/value map of query string parameters included with the request
    • headers: a key/value map of headers the server should respond to
    • post: a string matching the textual body of the response.
    • file: if specified, returns the contents of the given file as the request post. If the file cannot be found at request time, post is used instead
  • response: describes the server's response to the client
    • headers: a key/value map of headers the server should use in it's response
    • latency: the time in milliseconds the server should wait before responding. Useful for testing timeouts and latency
    • file: if specified, returns the contents of the given file as the response body. If the file cannot be found at request time, body is used instead
    • body: the textual body of the server's response to the client
    • status: the numerical HTTP status code (200 for OK, 404 for NOT FOUND, etc.)

YAML

-  request:
      url: ^/path/to/something$
      method: POST
      headers:
         authorization: "Basic usernamez:passwordinBase64"
      post: this is some post data in textual format
   response:
      headers:
         Content-Type: application/json
      latency: 1000
      status: 200
      body: Your request was successfully processed!

-  request:
      url: ^/path/to/anotherThing
      query:
         a: anything
         b: more
      method: GET
      headers:
         Content-Type: application/json
      post:
   response:
      headers:
         Content-Type: application/json
         Access-Control-Allow-Origin: "*"
      status: 204
      file: path/to/page.html

-  request:
      url: ^/path/to/thing$
      method: POST
      headers:
         Content-Type: application/json
      post: this is some post data in textual format
   response:
      headers:
         Content-Type: application/json
      status: 304

JSON

[
  {
    "request": {
      "url": "^/path/to/something$",
      "post": "this is some post data in textual format",
      "headers": {
         "authorization": "Basic usernamez:passwordinBase64"
      },
      "method": "POST"
    },
    "response": {
      "status": 200,
      "headers": {
        "Content-Type": "application/json"
      },
      "latency": 1000,
      "body": "Your request was successfully processed!"
    }
  },
  {
    "request": {
      "url": "^/path/to/anotherThing",
      "query": {
         "a": "anything",
         "b": "more"
      },
      "headers": {
        "Content-Type": "application/json"
      },
      "post": null,
      "method": "GET"
    },
    "response": {
      "status": 204,
      "headers": {
        "Content-Type": "application/json",
        "Access-Control-Allow-Origin": "*"
      },
      "file": "path/to/page.html"
    }
  },
  {
    "request": {
      "url": "^/path/to/thing$",
      "headers": {
        "Content-Type": "application/json"
      },
      "post": "this is some post data in textual format",
      "method": "POST"
    },
    "response": {
      "status": 304,
      "headers": {
        "Content-Type": "application/json"
      }
    }
  }
]

If you want to load more than one endpoint via file, use either a JSON array or YAML list (-) syntax. On success, the response will contain Location in the header with the newly created resources' location

Getting the ID of a Loaded Endpoint

Stubby adds the response-header X-Stubby-Resource-ID to outgoing responses. This ID can be referenced for use with the Admin portal.

Getting the Current List of Stubbed Endpoints

Performing a GET request on localhost:8889 will return a JSON array of all currently saved responses. It will reply with 204 : No Content if there are none saved.

Performing a GET request on localhost:8889/<id> will return the JSON object representing the response with the supplied id.

The Status Page

You can also view the currently configured endpoints by going to localhost:8889/status

Changing Existing Endpoints

Perform PUT requests in the same format as using POST, only this time supply the id in the path. For instance, to update the response with id 4 you would PUT to localhost:8889/4.

Deleting Endpoints

Send a DELETE request to localhost:8889/<id>

The Stubs Portal

Requests sent to any url at localhost:8882 (or wherever you told stubby to run) will search through the available endpoints and, if a match is found, respond with that endpoint's response data

How Endpoints Are Matched

For a given endpoint, stubby only cares about matching the properties of the request that have been defined in the YAML. The exception to this rule is method; if it is omitted it is defaulted to GET.

For instance, the following will match any POST request to the root url:

-  request:
      url: /
      method: POST
   response: {}

The request could have any headers and any post body it wants. It will match the above.

Pseudocode:

for each <endpoint> of stored endpoints {

   for each <property> of <endpoint> {
      if <endpoint>.<property> != <incoming request>.<property>
         next endpoint
   }

   return <endpoint>
}

Programmatic API

The Stubby module

Add stubby as a module within your project's directory:

    npm install stubby

Then within your project files you can do something like:

    var Stubby = require('stubby').Stubby;
    var mockService = new Stubby();

    mockService.start();

What can I do with it, you ask? Read on!

start(options, [callback])

  • options: an object containing parameters with which to start this stubby. Parameters go along with the full-name flags used from the command line.
    • stubs: port number to run the stubs portal
    • admin: port number to run the admin portal
    • tls: port number to run the stubs portal over https
    • data: JavaScript Object/Array containing endpoint data
    • location: address/hostname at which to run stubby.
    • key: keyfile contents (in PEM format)
    • cert: certificate file contents (in PEM format)
    • pfx: pfx file contents (mutually exclusive with key/cert options)
    • watch: filename to monitor and load as stubby's data when changes occur
    • quiet: defaults to true. Pass in false to have console output (if available)
    • _httpsOptions: additional options to pass to the underlying tls server.
    • caseSensitiveHeaders: if false (the default), all response headers are lower-cased.
  • callback: takes one parameter: the error message (if there is one), undefined otherwise

start([callback])

Identical to previous signature, only all options are assumed to be defaults.

stop([callback])

closes the connections and ports being used by stubby's stubs and admin portals. Executes callback afterward.

get(id, callback)

Simulates a GET request to the admin portal, with the callback receiving the resultant data.

  • id: the id of the endpoint to retrieve. If omitted, an array of all registered endpoints is passed the callback.
  • callback(err, endpoint): err is defined if no endpoint exists with the given id. Else, endpoint is populated.

get(callback)

Simulates a GET request to the admin portal, with the callback receiving the resultant data.

  • id: the id of the endpoint to retrieve. If omitted, an array of all registered endpoints is passed the callback.
  • callback(endpoints): takes a single parameter containing an array of returned results. Empty if no endpoints are registered

post(data, [callback])

  • data: an endpoint object to store in stubby
  • callback(err, endpoint): if all goes well, gets executed with the created endpoint. If there is an error, gets called with the error message.

put(id, data, [callback])

  • id: id of the endpoint to update.
  • data: data with which to replace the endpoint.
  • callback(err): executed with no passed parameters if successful. Else, passed the error message.

delete([id], callback)

  • id: id of the endpoint to destroy. If omitted, all endoints are cleared from stubby.
  • callback(): called after the endpoint has been removed

Example

var Stubby = require('stubby').Stubby;

var stubby1 = new Stubby();
var stubby2 = new Stubby();

stubby1.start({
  stubs: 80,
  admin: 81,
  location: 'localhost',
  data: [{
    request: { url: "/anywhere" }
  },{
    request: { url: "/but/here" }
  }]
});

stubby2.start({
  stubs: 82,
  admin: 83,
  location: '127.0.0.2'
});

See Also

TODO

Non-breaking changes

  • Allow multi-value fields (arrays and maps) as query/post params

Breaking changes

  • Intepret configuration values beginning and ending with / as regular expressions, otherwise consider as exact string matches
    • if / surrounded values do not compile as regex, log error to console/response when adding

NOTES

  • Copyright 2015 Eric Mrak, Alexander Zagniotov
  • License Apache v2.0