Docs: style numbers (en).

docs/api/en/animation/AnimationAction.html

@@ -59,7 +59,7 @@ <h3>[property:Boolean clampWhenFinished]</h3>
 			automatically be switched to false when the last loop of the action has
 			finished, so that this action has no further impact.<br /><br />
 
-			Default is false.<br /><br />
+			Default is `false`.<br /><br />
 
 			Note: `clampWhenFinished` has no impact if the action is interrupted (it
 			has only an effect if its last loop has really finished).
@@ -140,7 +140,7 @@ <h3>[property:Number timeScale]</h3>
 		<h3>[property:Number weight]</h3>
 		<p>
 			The degree of influence of this action (in the interval `[0, 1]`). Values
-			between `0` (no impact) and 1 (full impact) can be used to blend between
+			between `0` (no impact) and `1` (full impact) can be used to blend between
 			several actions. Default is `1`. <br /><br />
 			Properties/methods concerning `weight` are: 
 			[page:.crossFadeFrom crossFadeFrom], 
@@ -179,7 +179,7 @@ <h3>
 			of the time scales) will be applied.<br /><br />
 
 			Note: Like with `fadeIn`/`fadeOut`, the fading starts/ends with a weight
-			of 1.
+			of `1`.
 		</p>
 
 		<h3>
@@ -193,7 +193,7 @@ <h3>
 			of the time scales) will be applied.<br /><br />
 
 			Note: Like with `fadeIn`/`fadeOut`, the fading starts/ends with a weight
-			of 1.
+			of `1`.
 		</p>
 
 		<h3>[method:this fadeIn]( [param:Number durationInSeconds] )</h3>

docs/api/en/animation/tracks/ColorKeyframeTrack.html

@@ -26,7 +26,7 @@ <h3>
 			[page:String name] - (required) identifier for the KeyframeTrack.<br />
 			[page:Array times] - (required) array of keyframe times.<br />
 			[page:Array values] - values for the keyframes at the times specified, a
-			flat array of color components between 0 and 1.<br />
+			flat array of color components between `0` and `1`.<br />
 			[page:Constant interpolation] - the type of interpolation to use. See
 			[page:Animation Animation Constants] for possible values. Default is
 			[page:Animation InterpolateLinear].

docs/api/en/cameras/PerspectiveCamera.html

@@ -66,7 +66,7 @@ <h3>[property:Float far]</h3>
 
 		<h3>[property:Float filmGauge]</h3>
 		<p>
-			Film size used for the larger axis. Default is 35 (millimeters). This
+			Film size used for the larger axis. Default is `35` (millimeters). This
 			parameter does not influence the projection matrix unless .filmOffset is
 			set to a nonzero value.
 		</p>

docs/api/en/constants/Materials.html

@@ -144,7 +144,7 @@ <h2>Stencil Operations</h2>
 		<p>
 			Which stencil operation the material will perform on the stencil buffer
 			pixel if the provided stencil function passes.<br />
-			[page:Materials ZeroStencilOp] will set the stencil value to 0.<br />
+			[page:Materials ZeroStencilOp] will set the stencil value to `0`.<br />
 			[page:Materials KeepStencilOp] will not change the current stencil
 			value.<br />
 			[page:Materials ReplaceStencilOp] will replace the stencil value with the

docs/api/en/core/BufferGeometry.html

@@ -289,7 +289,7 @@ <h3>[method:this lookAt] ( [param:Vector3 vector] )</h3>
 
 		<h3>[method:undefined normalizeNormals]()</h3>
 		<p>
-			Every normal vector in a geometry will have a magnitude of 1. This will
+			Every normal vector in a geometry will have a magnitude of `1`. This will
 			correct lighting on the geometry surfaces.
 		</p>
 

docs/api/en/core/Raycaster.html

@@ -77,7 +77,7 @@ <h3>[name]( [param:Vector3 origin], [param:Vector3 direction], [param:Float near
 			[page:Vector3 direction] — The direction vector that gives direction to
 			the ray. Should be normalized.<br />
 			[page:Float near] — All results returned are further away than near. Near
-			can't be negative. Default value is 0.<br />
+			can't be negative. Default value is `0`.<br />
 			[page:Float far] — All results returned are closer than far. Far can't be
 			lower than near. Default value is Infinity.
 		</p>
@@ -155,7 +155,7 @@ <h3>[method:undefined set]( [param:Vector3 origin], [param:Vector3 direction])</
 		<h3>[method:undefined setFromCamera]( [param:Vector2 coords], [param:Camera camera] )</h3>
 		<p>
 			[page:Vector2 coords] — 2D coordinates of the mouse, in normalized device
-			coordinates (NDC)---X and Y components should be between -1 and 1.<br />
+			coordinates (NDC)---X and Y components should be between `-1` and `1`.<br />
 			[page:Camera camera] — camera from which the ray should originate
 		</p>
 		<p>Updates the ray with a new origin and direction.</p>

docs/api/en/extras/core/Curve.html

@@ -27,7 +27,7 @@ <h3>[property:Integer arcLengthDivisions]</h3>
 			cumulative segment lengths of a curve via [page:.getLengths]. To ensure
 			precision when using methods like [page:.getSpacedPoints], it is
 			recommended to increase [page:.arcLengthDivisions] if the curve is very
-			large. Default is 200.
+			large. Default is `200`.
 		</p>
 
 		<h2>Methods</h2>

docs/api/en/extras/core/Path.html

@@ -81,7 +81,7 @@ <h3>[method:this absellipse]( [param:Float x], [param:Float y], [param:Float xRa
 			endAngle -- The end angle in radians.<br />
 			clockwise -- Sweep the ellipse clockwise. Defaults to false.<br />
 			rotation -- The rotation angle of the ellipse in radians, counterclockwise
-			from the positive X axis. Optional, defaults to 0.<br /><br />
+			from the positive X axis. Optional, defaults to `0`.<br /><br />
 
 			Adds an absolutely positioned [page:EllipseCurve EllipseCurve] to the
 			path.

docs/api/en/geometries/BoxGeometry.html

@@ -58,22 +58,22 @@ <h3>
     </h3>
     <p>
       width — Width; that is, the length of the edges parallel to the X axis.
-      Optional; defaults to 1.
+      Optional; defaults to `1`.
       <br />
       height — Height; that is, the length of the edges parallel to the Y axis.
-      Optional; defaults to 1.
+      Optional; defaults to `1`.
       <br />
       depth — Depth; that is, the length of the edges parallel to the Z axis.
-      Optional; defaults to 1.
+      Optional; defaults to `1`.
       <br />
       widthSegments — Number of segmented rectangular faces along the width of
-      the sides. Optional; defaults to 1.
+      the sides. Optional; defaults to `1`.
       <br />
       heightSegments — Number of segmented rectangular faces along the height of
-      the sides. Optional; defaults to 1.
+      the sides. Optional; defaults to `1`.
       <br />
       depthSegments — Number of segmented rectangular faces along the depth of
-      the sides. Optional; defaults to 1.
+      the sides. Optional; defaults to `1`.
       <br />
     </p>
 

docs/api/en/geometries/CapsuleGeometry.html

@@ -51,12 +51,12 @@ <h3>
 			[name]([param:Float radius], [param:Float length], [param:Integer capSubdivisions], [param:Integer radialSegments])
 		</h3>
 		<p>
-			radius — Radius of the capsule. Optional; defaults to 1.<br />
-			length — Length of the middle section. Optional; defaults to 1.<br />
+			radius — Radius of the capsule. Optional; defaults to `1`.<br />
+			length — Length of the middle section. Optional; defaults to `1`.<br />
 			capSegments — Number of curve segments used to build the caps. Optional;
-			defaults to 4.<br />
+			defaults to `4`.<br />
 			radialSegments — Number of segmented faces around the circumference of the
-			capsule. Optional; defaults to 8.<br />
+			capsule. Optional; defaults to `8`.<br />
 		</p>
 
 		<h2>Properties</h2>

docs/api/en/geometries/CircleGeometry.html

@@ -56,11 +56,11 @@ <h3>
 		</h3>
 		<p>
 			radius — Radius of the circle, default = 1.<br />
-			segments — Number of segments (triangles), minimum = 3, default = 32.<br />
-			thetaStart — Start angle for first segment, default = 0 (three o'clock
+			segments — Number of segments (triangles), minimum = `3`, default = `32`.<br />
+			thetaStart — Start angle for first segment, default = `0` (three o'clock
 			position).<br />
 			thetaLength — The central angle, often called theta, of the circular
-			sector. The default is 2*Pi, which makes for a complete circle.
+			sector. The default is `2`*Pi, which makes for a complete circle.
 		</p>
 
 		<h2>Properties</h2>

docs/api/en/geometries/ConeGeometry.html

@@ -45,18 +45,18 @@ <h3>
 			[name]([param:Float radius], [param:Float height], [param:Integer radialSegments], [param:Integer heightSegments], [param:Boolean openEnded], [param:Float thetaStart], [param:Float thetaLength])
 		</h3>
 		<p>
-			radius — Radius of the cone base. Default is 1.<br />
-			height — Height of the cone. Default is 1.<br />
+			radius — Radius of the cone base. Default is `1`.<br />
+			height — Height of the cone. Default is `1`.<br />
 			radialSegments — Number of segmented faces around the circumference of the
-			cone. Default is 32<br />
+			cone. Default is `32`<br />
 			heightSegments — Number of rows of faces along the height of the cone.
-			Default is 1.<br />
+			Default is `1`.<br />
 			openEnded — A Boolean indicating whether the base of the cone is open or
 			capped. Default is false, meaning capped.<br />
 			thetaStart — Start angle for first segment, default = 0 (three o'clock
 			position).<br />
 			thetaLength — The central angle, often called theta, of the circular
-			sector. The default is 2*Pi, which makes for a complete cone.
+			sector. The default is `2`*Pi, which makes for a complete cone.
 		</p>
 
 		<h2>Properties</h2>

docs/api/en/geometries/CylinderGeometry.html

@@ -49,19 +49,19 @@ <h3>
 			[param:Boolean openEnded], [param:Float thetaStart], [param:Float thetaLength])
 		</h3>
 		<p>
-			radiusTop — Radius of the cylinder at the top. Default is 1.<br />
-			radiusBottom — Radius of the cylinder at the bottom. Default is 1.<br />
-			height — Height of the cylinder. Default is 1.<br />
+			radiusTop — Radius of the cylinder at the top. Default is `1`.<br />
+			radiusBottom — Radius of the cylinder at the bottom. Default is `1`.<br />
+			height — Height of the cylinder. Default is `1`.<br />
 			radialSegments — Number of segmented faces around the circumference of the
-			cylinder. Default is 32<br />
+			cylinder. Default is `32`<br />
 			heightSegments — Number of rows of faces along the height of the cylinder.
-			Default is 1.<br />
+			Default is `1`.<br />
 			openEnded — A Boolean indicating whether the ends of the cylinder are open
 			or capped. Default is false, meaning capped.<br />
 			thetaStart — Start angle for first segment, default = 0 (three o'clock
 			position).<br />
 			thetaLength — The central angle, often called theta, of the circular
-			sector. The default is 2*Pi, which makes for a complete cylinder.
+			sector. The default is `2`*Pi, which makes for a complete cylinder.
 		</p>
 
 		<h2>Properties</h2>

docs/api/en/geometries/DodecahedronGeometry.html

@@ -38,8 +38,8 @@ <h2>Constructor</h2>
 
 		<h3>[name]([param:Float radius], [param:Integer detail])</h3>
 		<p>
-			radius — Radius of the dodecahedron. Default is 1.<br />
-			detail — Default is 0. Setting this to a value greater than 0 adds
+			radius — Radius of the dodecahedron. Default is `1`.<br />
+			detail — Default is `0`. Setting this to a value greater than `0` adds
 			vertices making it no longer a dodecahedron.
 		</p>
 

docs/api/en/geometries/ExtrudeGeometry.html

@@ -72,29 +72,29 @@ <h3>[name]([param:Array shapes], [param:Object options])</h3>
 
 		<ul>
 			<li>
-				curveSegments — int. Number of points on the curves. Default is 12.
+				curveSegments — int. Number of points on the curves. Default is `12`.
 			</li>
 			<li>
 				steps — int. Number of points used for subdividing segments along the
-				depth of the extruded spline. Default is 1.
+				depth of the extruded spline. Default is `1`.
 			</li>
-			<li>depth — float. Depth to extrude the shape. Default is 1.</li>
+			<li>depth — float. Depth to extrude the shape. Default is `1`.</li>
 			<li>
 				bevelEnabled — bool. Apply beveling to the shape. Default is true.
 			</li>
 			<li>
 				bevelThickness — float. How deep into the original shape the bevel goes.
-				Default is 0.2.
+				Default is `0.2`.
 			</li>
 			<li>
 				bevelSize — float. Distance from the shape outline that the bevel
 				extends. Default is bevelThickness - 0.1.
 			</li>
 			<li>
 				bevelOffset — float. Distance from the shape outline that the bevel
-				starts. Default is 0.
+				starts. Default is `0`.
 			</li>
-			<li>bevelSegments — int. Number of bevel layers. Default is 3.</li>
+			<li>bevelSegments — int. Number of bevel layers. Default is `3`.</li>
 			<li>
 				extrudePath — THREE.Curve. A 3D spline path along which the shape should
 				be extruded. Bevels not supported for path extrusion.

docs/api/en/geometries/IcosahedronGeometry.html

@@ -37,8 +37,8 @@ <h2>Constructor</h2>
 
 		<h3>[name]([param:Float radius], [param:Integer detail])</h3>
 		<p>
-			radius — Default is 1. <br />
-			detail — Default is 0. Setting this to a value greater than 0 adds more
+			radius — Default is `1`. <br />
+			detail — Default is `0`. Setting this to a value greater than `0` adds more
 			vertices making it no longer an icosahedron. When detail is greater than
 			1, it's effectively a sphere.
 		</p>

docs/api/en/geometries/LatheGeometry.html

@@ -61,7 +61,7 @@ <h3>
 			creates a simple diamond shape.<br />
 			segments — the number of circumference segments to generate. Default is
 			12.<br />
-			phiStart — the starting angle in radians. Default is 0.<br />
+			phiStart — the starting angle in radians. Default is `0`.<br />
 			phiLength — the radian (0 to 2PI) range of the lathed section 2PI is a
 			closed lathe, less than 2PI is a portion. Default is 2PI.
 		</p>

docs/api/en/geometries/OctahedronGeometry.html

@@ -36,8 +36,8 @@ <h2>Constructor</h2>
 
 		<h3>[name]([param:Float radius], [param:Integer detail])</h3>
 		<p>
-			radius — Radius of the octahedron. Default is 1.<br />
-			detail — Default is 0. Setting this to a value greater than zero add
+			radius — Radius of the octahedron. Default is `1`.<br />
+			detail — Default is `0`. Setting this to a value greater than zero add
 			vertices making it no longer an octahedron.
 		</p>
 

docs/api/en/geometries/PlaneGeometry.html

@@ -49,10 +49,10 @@ <h3>
 			widthSegments], [param:Integer heightSegments])
 		</h3>
 		<p>
-			width — Width along the X axis. Default is 1.<br />
-			height — Height along the Y axis. Default is 1.<br />
-			widthSegments — Optional. Default is 1. <br />
-			heightSegments — Optional. Default is 1.
+			width — Width along the X axis. Default is `1`.<br />
+			height — Height along the Y axis. Default is `1`.<br />
+			widthSegments — Optional. Default is `1`. <br />
+			heightSegments — Optional. Default is `1`.
 		</p>
 
 		<h2>Properties</h2>

docs/api/en/geometries/RingGeometry.html

@@ -45,12 +45,12 @@ <h3>
 			[param:Integer thetaSegments], [param:Integer phiSegments], [param:Float thetaStart], [param:Float thetaLength])
 		</h3>
 		<p>
-			innerRadius — Default is 0.5. <br />
-			outerRadius — Default is 1. <br />
+			innerRadius — Default is `0.5`. <br />
+			outerRadius — Default is `1`. <br />
 			thetaSegments — Number of segments. A higher number means the ring will be
-			more round. Minimum is 3. Default is 32. <br />
-			phiSegments — Minimum is 1. Default is 1.<br />
-			thetaStart — Starting angle. Default is 0. <br />
+			more round. Minimum is `3`. Default is `32`. <br />
+			phiSegments — Minimum is `1`. Default is `1`.<br />
+			thetaStart — Starting angle. Default is `0`. <br />
 			thetaLength — Central angle. Default is Math.PI * 2.
 		</p>
 

docs/api/en/geometries/SphereGeometry.html

@@ -49,15 +49,15 @@ <h3>
 		</h3>
 
 		<p>
-			radius — sphere radius. Default is 1.<br />
-			widthSegments — number of horizontal segments. Minimum value is 3, and the
-			default is 32.<br />
-			heightSegments — number of vertical segments. Minimum value is 2, and the
-			default is 16.<br />
-			phiStart — specify horizontal starting angle. Default is 0.<br />
+			radius — sphere radius. Default is `1`.<br />
+			widthSegments — number of horizontal segments. Minimum value is `3`, and the
+			default is `32`.<br />
+			heightSegments — number of vertical segments. Minimum value is `2`, and the
+			default is `16`.<br />
+			phiStart — specify horizontal starting angle. Default is `0`.<br />
 			phiLength — specify horizontal sweep angle size. Default is Math.PI *
 			2.<br />
-			thetaStart — specify vertical starting angle. Default is 0.<br />
+			thetaStart — specify vertical starting angle. Default is `0`.<br />
 			thetaLength — specify vertical sweep angle size. Default is Math.PI.<br />
 		</p>
 

docs/api/en/geometries/TetrahedronGeometry.html

@@ -37,8 +37,8 @@ <h2>Constructor</h2>
 
 		<h3>[name]([param:Float radius], [param:Integer detail])</h3>
 		<p>
-			radius — Radius of the tetrahedron. Default is 1.<br />
-			detail — Default is 0. Setting this to a value greater than 0 adds
+			radius — Radius of the tetrahedron. Default is `1`.<br />
+			detail — Default is `0`. Setting this to a value greater than `0` adds
 			vertices making it no longer a tetrahedron.
 		</p>
 

docs/api/en/geometries/TorusGeometry.html

@@ -48,10 +48,10 @@ <h3>
 		</h3>
 		<p>
 			radius - Radius of the torus, from the center of the torus to the center
-			of the tube. Default is 1. <br />
-			tube — Radius of the tube. Default is 0.4. <br />
-			radialSegments — Default is 12 <br />
-			tubularSegments — Default is 48. <br />
+			of the tube. Default is `1`. <br />
+			tube — Radius of the tube. Default is `0.4`. <br />
+			radialSegments — Default is `12` <br />
+			tubularSegments — Default is `48`. <br />
 			arc — Central angle. Default is Math.PI * 2.
 		</p>