Home Buttons v2.5.1

• Support for Home Buttons Industrial
• Static IP configuration resets when changing Wi-Fi network #75

---

⚠️ Important if updating from versions lower than v2.4.0:

(Applicable only for the 6 button original Home Buttons)

Your device will get bricked if you don't follow this instructions.

• OTA can NOT be used to update to this version due to bootloader incompatibility.
• Make sure you firmware is v2.1.0 or later before proceeding. If it's not, use OTA to update to v2.3.0 first.
• Use the new Online Flasher or Esptool to flash the v2.5.1 full image. The user configuration will be reset.
• Flashing only the update image will no work. You must use the full image.

Home Buttons Mini can be updated via OTA as usual. No special steps required.

Home Buttons v2.4.3

• Support for 6 button hardware v2.5

---

⚠️ Important if updating from versions lower than v2.4.0:

(Applicable only for the 6 button original Home Buttons)

Your device will get bricked if you don't follow this instructions.

• OTA can NOT be used to update to this version due to bootloader incompatibility.
• Make sure you firmware is v2.1.0 or later before proceeding. If it's not, use OTA to update to v2.3.0 first.
• Use the new Online Flasher or Esptool to flash the v2.4.3 full image. The user configuration will be reset.
• Flashing only the update image will no work. You must use the full image.

Home Buttons Mini can be updated via OTA as usual. No special steps required.

Home Buttons v2.4.2

• Fixed an issue where material icons could not be downloaded

---

⚠️ Important if updating from versions lower than v2.4.0:

(Applicable only for the 6 button original Home Buttons)

Your device will get bricked if you don't follow this instructions.

• OTA can NOT be used to update to this version due to bootloader incompatibility.
• Make sure you firmware is v2.1.0 or later before proceeding. If it's not, use OTA to update to v2.3.0 first.
• Use the new Online Flasher or Esptool to flash the v2.4.2 full image. The user configuration will be reset.
• Flashing only the update image will no work. You must use the full image.

Home Buttons Mini can be updated via OTA as usual. No special steps required.

Home Buttons v2.4.1

• Fixed a bug where % would not display correctly in labels and could brick the device in rare cases
• Changed Home Assistant entity naming convention according to updated guidelines. This fixes double device name before the entity name appearing on Home Assistant 2023.08 and later

---

⚠️ Important if updating from versions lower than v2.4.0:

(Applicable only for the 6 button original Home Buttons)

Your device will get bricked if you don't follow this instructions.

• OTA can NOT be used to update to this version due to bootloader incompatibility.
• Make sure you firmware is v2.1.0 or later before proceeding. If it's not, use OTA to update to v2.3.0 first.
• Use the new Online Flasher or Esptool to flash the v2.4.1 full image. The user configuration will be reset.
• Flashing only the update image will no work. You must use the full image.

Home Buttons Mini can be updated via OTA as usual. No special steps required.

Home Buttons v2.4.0

• Support for Home Buttons HW revision 2.4
• Added OTA update check, making it impossible to flash Mini software to Original hardware and vice versa
• Home Buttons Original: Reduced Wi-Fi connect time on WPA3 secured networks by 0.8 s by changing flash mode to qio

---

⚠️ Important information for the 6 button original Home Buttons:

Your device will get bricked if you don't follow this instructions.

• OTA can NOT be used to update to this version due to bootloader incompatibility.
• Make sure you firmware is v2.1.0 or later before proceeding. If it's not, use OTA to update to v2.3.0 first.
• Use the new Online Flasher or Esptool to flash the v2.4.0 full image. The user configuration will be reset.
• Flashing only the update image will no work. You must use the full image.

Home Buttons Mini can be updated via OTA as usual. No special steps required.

Home Buttons v2.3.0

• Fixed a bug when a label would not change immediately after a button press triggered label change automation #34, #53
• Implemented Schedule Wakeup that can be used when changing labels dynamically using automations #34
• Added Custom Message functionality as entity in Home Assistant
• Settings Menu is now opened by holding two buttons simultaneously for 5 s #55

Important: Please make sure to flash the correct .bin for your device!

Home Buttons v2.2.1

• Added option to force small text font by prepending an underscore: _ #51
• If network connection is taking long after button press, you can now abort it by pressing any button
• Increased length of MQTT username and password from 50 to 64 characters #58

Important: Please make sure to flash the correct .bin for your device!

Home Buttons v2.2.0

• Added support for Home Buttons Mini hardware
• Added feature to display user defined messages #36
• After saving setup, MQTT discovery message is sent immediately and icons are downloaded
• Fixed a few icons related bugs

Important: Please make sure to flash the correct .bin for your device!

Home Buttons v2.1.0

• Material Design Icons

  Any of the 7000+ icons can be set as button label. Also supports icon and text in the same
  label. See documentation for more info.

• New settings menu

  A nice graphical menu to see device info, enter setup or restart the device.

• Fahrenheit support

• Major code quality improvements thanks to @mcarbonne

Home Buttons v2.0.6

• Reduced average reaction time by 40% compared to v2.0.4
• Added option to set static IP (reduces average reaction time by additional 30-50%)