Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

InputText with big frame padding weird behavior #3781

Closed
mooko-dev opened this issue Feb 2, 2021 · 5 comments
Closed

InputText with big frame padding weird behavior #3781

mooko-dev opened this issue Feb 2, 2021 · 5 comments

Comments

@mooko-dev
Copy link

Hello!
I want to draw the InputText frame with big horizontal inner frame padding.
Code:

        ImGui::Begin("Window");

        ImGui::PushStyleVar(ImGuiStyleVar_FramePadding, ImVec2(50, ImGui::GetStyle().FramePadding.y));
        static char str[256];
        ImGui::InputText("Text", str, sizeof(str));
        ImGui::PopStyleVar();

        ImGui::End();

Weird behavior is:

  1. Padding's ignored if the text width greater than the frame width.
    example
  2. If the text doesn't fit in the frame and I continue typing, it doesn't immediately move the cursor to the end of the text, unlike when there is no padding
    Without padding:
    without_padding
    With padding:
    with_padding
  3. Frame padding applies only to the left side. Is it possible to apply frame padding for the right side too?
@ocornut
Copy link
Owner

ocornut commented Feb 2, 2021

Padding is not designed to be large.

(1) Padding's ignored if the text width greater than the frame width.

We need to overlap that padding section to signify that there is content on the left right of the box, otherwise there would be no way to visualize that information at a glance.

(2) If the text doesn't fit in the frame and I continue typing, it doesn't immediately move the cursor to the end of the text, unlike when there is no padding

That looks like a bug and I'll look into fixing it now.

(3) Frame padding applies only to the left side. Is it possible to apply frame padding for the right side too?

Same reason as (1).

@ocornut
Copy link
Owner

ocornut commented Feb 2, 2021

To workaround (1) and (3) you might be able display a larger frame yourself, then while calling InputText() set the FrameBg color to zero with PushStyleColor(). It might or not work for you depending on why you need such unusual amount of padding.

@mooko-dev
Copy link
Author

To workaround (1) and (3) you might be able display a larger frame yourself, then while calling InputText() set the FrameBg color to zero with PushStyleColor(). It might or not work for you depending on why you need such unusual amount of padding.

It's good idea, thanks!

ocornut added a commit that referenced this issue Feb 2, 2021
… values of FramePadding.x. Multiline: Fixed padding/cliprect not matching single-line version. (#3781)

Fixed FramePadding.y worth of vertical offset when aiming with mouse.
@ocornut
Copy link
Owner

ocornut commented Feb 2, 2021

Pushed d1a9efd with 3 fixes:

  • Input cursor tracking was slightly off (point 2)
  • Padding/clipping was slightly different for multiline inputs, it now does the same as single-line, as explained above.
  • Mouse cursor tracking was slightly off by FramePadding.y vertically on multiline inputs (not mentioned here)

@ocornut
Copy link
Owner

ocornut commented Dec 9, 2021

This added a small regression #4794 which was fixed by 072caa4

Noisyfox pushed a commit to Noisyfox/OrcaSlicer that referenced this issue Nov 26, 2023
…ui#4794, ocornut/imgui#3781)

InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794)

(cherry picked from commit ocornut/imgui@072caa4)
(cherry picked from commit ocornut/imgui@bdd2a94)
SoftFever added a commit to SoftFever/OrcaSlicer that referenced this issue Dec 9, 2023
* Rework UI jobs to make them more understandable and flexible.

* Update Orca specific jobs

* Fix progress issue

* Fix dark mode and window radius

* Update cereal version from 1.2.2 to 1.3.0

(cherry picked from commit prusa3d/PrusaSlicer@057232a)

* Initial port of Emboss gizmo

* Bump up CGAL version to 5.4

(cherry picked from commit prusa3d/PrusaSlicer@1bf9dee)

* Fix text rotation

* Fix test dragging

* Add text gizmo to right click menu

* Initial port of SVG gizmo

* Fix text rotation

* Fix Linux build

* Fix "from surface"

* Fix -90 rotation

* Fix icon path

* Fix loading font with non-ascii name

* Fix storing non-utf8 font descriptor in 3mf file

* Fix filtering with non-utf8 characters

* Emboss: Use Orca style input dialog

* Fix build on macOS

* Fix tooltip color in light mode

* InputText: fixed incorrect padding when FrameBorder > 0. (ocornut/imgui#4794, ocornut/imgui#3781)
InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794)

(cherry picked from commit ocornut/imgui@072caa4)
(cherry picked from commit ocornut/imgui@bdd2a94)

* SVG: Use Orca style input dialog

* Fix job progress update

* Fix crash when select editing text in preview screen

* Use Orca checkbox style

* Fix issue that toolbar icons are kept regenerated

* Emboss: Fix text & icon alignment

* SVG: Fix text & icon alignment

* Emboss: fix toolbar icon mouse hover state

* Add a simple subtle outline effect by drawing back faces using wireframe mode

* Disable selection outlines

* Show outline in white if the model color is too dark

* Make the outline algorithm more reliable

* Enable cull face, which fix render on Linux

* Fix `disable_cullface`

* Post merge fix

* Optimize selection rendering

* Fix scale gizmo

* Emboss: Fix text rotation if base object is scaled

* Fix volume synchronize

* Fix emboss rotation

* Emboss: Fix advance toggle

* Fix text position after reopened the project

* Make font style preview darker

* Make font style preview selector height shorter

---------

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: ocornut <omarcornut@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
hliebscher added a commit to hliebscher/GalaxySlicer that referenced this issue Dec 11, 2023
* Rework UI jobs to make them more understandable and flexible.

* Update Orca specific jobs

* Fix progress issue

* Fix dark mode and window radius

* Update cereal version from 1.2.2 to 1.3.0

(cherry picked from commit prusa3d/PrusaSlicer@057232a)

* Initial port of Emboss gizmo

* Bump up CGAL version to 5.4

(cherry picked from commit prusa3d/PrusaSlicer@1bf9dee)

* Fix text rotation

* Fix test dragging

* Add text gizmo to right click menu

* Initial port of SVG gizmo

* Fix text rotation

* Fix Linux build

* Fix "from surface"

* Fix -90 rotation

* Fix icon path

* Fix loading font with non-ascii name

* Fix storing non-utf8 font descriptor in 3mf file

* Fix filtering with non-utf8 characters

* Emboss: Use Orca style input dialog

* Fix build on macOS

* Fix tooltip color in light mode

* InputText: fixed incorrect padding when FrameBorder > 0. (ocornut/imgui#4794, ocornut/imgui#3781)
InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794)

(cherry picked from commit ocornut/imgui@072caa4)
(cherry picked from commit ocornut/imgui@bdd2a94)

* SVG: Use Orca style input dialog

* Fix job progress update

* Fix crash when select editing text in preview screen

* Use Orca checkbox style

* Fix issue that toolbar icons are kept regenerated

* Emboss: Fix text & icon alignment

* SVG: Fix text & icon alignment

* Emboss: fix toolbar icon mouse hover state

* Add a simple subtle outline effect by drawing back faces using wireframe mode

* Disable selection outlines

* Show outline in white if the model color is too dark

* Make the outline algorithm more reliable

* Enable cull face, which fix render on Linux

* Fix `disable_cullface`

* Post merge fix

* Optimize selection rendering

* Fix scale gizmo

* Emboss: Fix text rotation if base object is scaled

* Fix volume synchronize

* Fix emboss rotation

* Emboss: Fix advance toggle

* Fix text position after reopened the project

* Make font style preview darker

* Make font style preview selector height shorter

---------

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: ocornut <omarcornut@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
J-DRD added a commit to J-DRD/GalaxySlicer that referenced this issue Dec 25, 2023
* Add option to "Reverse only internal perimeters" under the reverse on odd feature to reduce part warping

* rem unused files

* wire frame

* wireframe mmu

* rework UI Jobs

* update ui jobs

* fix progess

* fix dark mode radius

* Update cereal version

* fix

* fix cereal

* Initial port of Emboss gizmo

* text rotation

* cgal fix

* fix text dragging

* Add text gizmo to right click menu

* svg gizmo

* fix text

* Fix linux build

* Update README

oppened -> opened

* fix

* fix .gitignore

* fix from surface

* fix 90 rotation

* fix path

* style

* Fix cmake error (#2871)

Use the correct target name when setting properties on cereal.

* Internal Bridge Flow rate parameter introduction (#2859)

* Internal Bridge Flow rate parameter introduction

* updated incorrect capitalisation

* Updated parameter ordering

* fix_running

* minor revisions to GUI

* Housework for Printer Profiles

#1 - Revert decision to create './extra_printer_profiles/' at this time
#2 - Import modified profiles for Bambulab X1-Carbon from %APPDATA%

* update deps

* Update build_win_x64.yml

* Support initial_tool variable for filename format

* fix printer

* Update translation Korean (#2731)

update translation korean

* limit max wipe tower speed to 90 mm/s

* fix wipe tower bug: filament end inserted twice

* Fix for QOI thumbnails not working (#2755)

Fix for QOI not working

Should remidy the issues in https://github.com/SoftFever/OrcaSlicer/issues/2741

* orca bot: processing issues in ascending order

* fix thumbnails regression

* [Multi Material] Fix first layers of prime tower when using "no sparse layers" (#2764)

* MM - Add check for first layer

* Change: If no sparse layer is on -> Respect the toolchange in the first-layer checkup, to use a brim and slow down printspeed if using a primetower

* Fix comment

* Rework Github Build Actions (#2566)

update workflows from dev branch

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Zip Windows portable build and PDB before upload artifacts

* Fix purging not working for BBL printers (#2912)

* Update BuildLinux.sh (#2919)

getting the value for FOUND_GTK* variables seems to cause an error which prevents using the -u option to install the needed packages. This is fixed by moving the "exit on first error" flag to after setting these vars.

* Some changes to gcode window toggles (#2704)

* Show gcode window automatically (#2572)

* Move the show gcode toggle to view menu, and remember if gcode window is shown last time

* fix an issue when merging main branch

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Use windows API to copy files (#2923)

* Build release branches (#2941)

update cicd to build release branches

* Feature/bs1.8beta (#2844)

* ENH: Show Recent File Image Keep Scale

Change-Id: Ib8a6cf916eaee8e353bf858bc4f2ea503705809e

* FIX: wipetower position problem

jira: STUDIO-4914

Change-Id: I7b05d3c53931ed8ce3d4603ff21ee6ef675611e5

* FIX: dailytips adapts screen scale

jira: STUDIO-5019 STUDIO-5026 STUDIO-5027 STUDIO-5028 STUDIO-5025

Change-Id: I63d3af1870218ba8e0f048a6ef03fb29fabe27cb

* FIX: generate process preset based on template

Jira: XXXX

Change-Id: I50adf0790dc239307d236a4cebece860ef6beb16
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: object list plate name edit

Change-Id: I61d3dcd7d9598d759a3a0b44cc77d2af2adca25a
Jira: STUDIO-4937

* ENH:no longer checking nozzle type

jira:[for nozzle type check]

Change-Id: I0e88445a264f21b0c11519e9a22a165d05611d14

* ENH: improve first layer tree support

First layer support can't be top interface, and
min brim width of auto mode should be larger
than 0.

Jira: STUDIO-5010
Change-Id: I02f8b017b535f8a47965387e8679f692b1966e04
(cherry picked from commit 3e7d54abe352e8ab5f9d6492b5a86a96f9067f94)

* ENH: version: bumped to 1.8

JIRA: no jira
Change-Id: I50903098b59f1dd9a6b6cf7656cec7d388f3ff17

* ENH:try again after subscription failure

jira:[Try again after subscription failure]

Change-Id: Ibfb1e8e26eb166d786a372632a86ef98030db034

* ENH:display msg dialog once

jira:[for http error msg]

Change-Id: I12e9c155fdb567cac99c35b6feeef650269ba75d

* ENH:remove config.json file

Change-Id: Idfcf3a63fefe968e88153c26fb691fd05cd83dc4

* ENH:add protection in threads

jira:[for random crash]

Change-Id: I6286012dd77abccba461f7cd72a6fc531a84c95f

* FIX: add protection for get_model_task_thread thread

Jira: XXXX

Change-Id: I3cbc17d181a0e13c658f31eaeb6a4df878e6df41
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: delete all compatible presets when delete third printer

Jira: XXXX

Change-Id: I1a294402627e7ab7a8c6701f20679b3d04aff059
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.51

Change-Id: I20a01adacbdb5fe69c106b9efd029f7308136e10

* ENH: default open support_interface_not_for_body

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I48e084deb18633f9ec47a8ec4ec643163bf66318

* ENH:modified text with too low version

jira:[for low version]

Change-Id: I862a0defda976a35f326a8805e002330f2ed7fdf

* NEW:update printer config file version

Change-Id: I9a46b29b03beb67a3da0b8f76d8b5c4b3c482928

* FIX:The plane should rotate around the world coordinate system

Jira: STUDIO-5054
Change-Id: I16e484b38d79cabd9473acf1abf3c5c6b0adc4c6

* ENH:translate for limit file size and so on

Jira: STUDIO-5007
Change-Id: I2c279eb690841aa51cd8128f8028266cbc17e977

* ENH:use on_render_rotate_gizmos() replace GLGizmoRotate3D::on_render()

Jira: STUDIO-4227
Change-Id: If9b9ea5596e59472d5fa87ac56aeb7f6ecc65643

* FIX: some mistakes in filament profiles

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibe7f3650f2d9cf47561dd5f2ec591a5f6c553503

* FIX: fix shard_ptr is null

Change-Id: I0187cf64ffbb08a2265a11900b5c865e9ac9678f

* FIX:N1 printer image in dark mode

JIRA:STUDIO-4057
Change-Id: I22c001d96839daf213d5096f6ff6e3d6398fa8c4

* FIX: create printer issue

Jira: 5034 5059 5053
5034 create printer but filament is repeat
5039 create successful dialog remove to center
5053 create existing printer copywriting adjustments and preset updates
Delete printer secondary confirmation dialog

Change-Id: Ifb3822d1e168459d2af11e02b31ecaf3719d338a
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH:just don't check the nozzle diameter

jira:[for nozzle check]

Change-Id: I678e7d62832eaa14b9be47d6dce70f29ebd601f6

* NEW:p1 and x1 series added motor noise calibration

JIRA: 5085
Change-Id: Id73cc2d34b6130f215d81ffcdc39ba6b241445bf

* ci: update build version to 01.08.00.52

Change-Id: I93d800b413f2751d132fac53fbd9b191603d0352

* FIX: ObjectSetting changed when search plate

JIRA: STUDIO-5095

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I39b1ad997d51ac4224ff5ad2b3555f56da4bd911

* FIX: invalid support params in 3rd party profiles

Many params are not right.Just use default

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5c4a1e8b046940e174f5681a79031b5f20fcafc5

* ENH: update A1 mini start gcode

Change x-axis freq sweep amp 5->10

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I2e731cc6392c0204d5e4467bf4b933ab233bc157

* FIX: [STUDIO-4946] use utf8 path to create sub process

Change-Id: I5873c114e8cd36978a7d50bf13c3aa7bf8b740ca
Jira: STUDIO-4946

* FIX: fix a plate state not correct issue

JIRA: no-jira
the object and instance states lost after undo

Change-Id: I527df9a7d426d994501a4ed5bbb198c7bbac810b

* FIX: some translation

Jira: 5096 5089 5036 5004

Change-Id: I4f1bd6e352b11451f5caf02cbc4eeb31dfa03eee
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: [STUDIO-4935] plate name edit in object list

Change-Id: I271fa217281d0c7ceca61166497136628a66681e
Jira: STUDIO-4935

* FIX: take custom root as AMS sync candicate

Change-Id: I9c71babcd74238d1533b15d77a978b19997c70c0
Jira: none

* FIX: modify some default support params in code

1. Modify default values of some supports params, so 3rd party profiles are easier to setup.
3. Fix a bug that organic support may cause crash.

Jira: none

Change-Id: Icae348d8fe5985f4287404e96089198a499283f2
(cherry picked from commit 8889cfc703b72e142f288e525b89c87619f2213c)

* FIX: do not generate sheath for normal support

Jira: none
Change-Id: I8f3f3e39171055f8d18c06ceee8e245594273238
(cherry picked from commit 93bc7ecf4346f179f502bebc3cf47b0030b56e2c)

* FIX: push_notification on GUI thread

Change-Id: Iaec347f5684fe0f65d6418759518189b67033c42
Jira: STUDIO-5106

* ENH: CLI: add some params to support more functions

1. uptodate_filaments to support update the original filaments to newest config
2. allow_rotations/avoid_extrusion_cali_region for auto-arrange
3. skip_modified_gcodes to support skip modified gcodes

JIRA: STUDIO-5112
Change-Id: I95c09af1b5462cce3bf27aea32228d6d1d1d201d

* FIX: missed manually entered values for secondary processing

Jira: STUDIO-4964
Change-Id: I5cf0da1ae77cccd34de05b4a0318a751ac9f6753

* FIX: Z hop is still enabled when upper boundary is zero.

Jira: STUDIO-4893

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I5f46a02e1fbb15ff43e253e3a184aa6cc38e7598

* ENH: update default filaments for Bambu printers

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ic6380f39e546854ad0b7dc36929a8605c9ab3acc

* ENH: dailytips modification

1. modify closing behavior
2. dailytips can adjust self size according to the canvas size. And also adjust
   GodeViewer legend window size
3. fix a button text encoding bug
4. support vertical/horizontal layout(horizontal layout currently not used)

jira: new

Change-Id: I8e0b6e85c455d0608d7388fb441829c1991ad01f

* FIX: [4857 5097] export list and del preset two confirm issue

Jira: 4857 5097

Change-Id: If7cc4967a663f575527a227e9c4ac31e0491930c

* FIX: UUID conflict issue when referencing volume

Jira: XXXX
3mf file standard

Change-Id: I953a87294684ea85d03a95e7d2843c096904aeae
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: [4483 5003 5109] create printer and edit filament issue

Jira: 4483 5003 5109
4483 dialog blink
5003 preset list too long
5109 encode

Change-Id: I190e12272ca09f36b841f2f85a6cf60f2c2614bd
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: cloud use presets limit notify

Change-Id: I6cc7b4e560cb83db0fc30921633b10531957128e
Jira: STUDIO-5091, STUDIO-5104

* FIX: do user preset sync later on startup

Change-Id: I0653a0438477b1c803ce1cddc66ef47f95616dae
Jira: STUDIO-5106

* FIX: linux: pressing enter in height range will crash

jira: STUDIO-4391
Change-Id: I6bf990951d1456f5b2605b8d62a05bceb3cc4c10

* FIX: failed to limit the max width of DropDown

Jira: STUDIO-4503

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Id9352d16f4bc016daade72a9c8d3d90164a1cb3d

* FIX: not jump to preview after first wizard

Change-Id: I8c94d66a91aa15a7874441a300b40438638bd33b
Jira: STUDIO-5018

* ENH: CLI: clear custom gcodes when skip_modified_gcodes

JIRA: STUDIO-5112
Change-Id: I2e7346d2ac57519029a4e80e5492c34d3d91ed77

* FIX: [4492 4851 4883 5121] create printer issue

Jira: 4492 4851 4883 5121

Change-Id: If252b5f30be0403f79410aa8c00fc14b066d5bbd
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: add 'edit preset' and 'delete preset' btn for each preset

Jira: 5200 5113

Change-Id: I208ad63eb4b895306fa76db424da2e1df10a582e
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: add skip label before tool change

Jira: 5074
github: 2776

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Icaafd3b45da1e78c1a82e7d17d7505d9439b9100

* FIX:Network test dark mode adaptation

JIRA:STUDIO-2468
Change-Id: I20cb7f1fd8eca3ce852acb563c1cc87978e216dc

* FIX:n1 external feed prompt pop-up without retry button

JIRA: STUDIO-4696
Change-Id: I31069c72e29d3398469d71cdbc2a344a5430fc2c

* FIX: not show device page when switch printer preset

Change-Id: I00d8524625a4682b6a39876ddb66bf8bd928dbef
Jira: none

* ENH: Check the nozzle diameter when sending calibration

Jira: 4977
Change-Id: Iabbba44583bbd9fbaaa889ca546ee0ccbb2aa77f

* FIX: Generate UUID from objectID and volumeIndex

Jira: XXXX

Change-Id: I65147ef9b695f8af8de260d722e604b0e0bab563
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: disable filament_typep

Jira: XXXX

Change-Id: Ib605b33e4474525fbe49e70596fc09aa356f478a
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.53

Change-Id: I1d574fa2cf2a4d0eb63a38eb8ced7587d06a4272

* ENH: refine display logic of param

1. Refine the display logic of "support_interface_not_for_body".Only
toggle if support_filament is default and support_interface_filament
is specified

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia2af030c4531ad6b04a198bfe8a1677b3d20a800

* FIX: user preset sync token

Change-Id: Id2aa865b778ee9ac4cfddb68ceef0374507b519b
Jira: none

* FIX: Bitmap cache not take effect

Change-Id: I972098fdbda0b4542c6c759a8f5e1f0f2a30852b
Jira: STUDIO-4991

* NEW: Open HotModel Link With GetParam-From bambustudio

JIRA: NO JIRA

Change-Id: I4ac49bac5ee0c50988c76a38b00b7ba7dc3201f5

* NEW:AmsMaterialsSetting Support for user-preset

JIRA: STUDIO-5135
Change-Id: If848047cd5dbd059d440de30989c505c361305a7

* FIX: upload custom root preset fail

Change-Id: I621c8d542dd604b07cc5df63d97d7a31558d3aba
Jira: none

* FIX: show custom filament in AMS filament list

Change-Id: I79b9f8f2f08db8c52bbed76f1ea133baff383c00
Jira: none

* FIX: dailytips window and gcodeviwer legend window size issue

reset to original logic of dailytips and legend window size

jira: new

Change-Id: Iacb016bb222ba3f87317cfbe1f2b003802d773a5

* ENH: add text translation

jira: new

Change-Id: I780cfb8a0a64d806b5e0a414b6598e3b7bdf52dc

* FIX: Delete and search object outside the plate

JIRA:
1. STUDIO-5132 Deleting object outside the plate will crash
2. STUDIO-5146 The search function cannot search for object outside the plate

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I84cb3fe990a9c2a182e7434c262466a70545280e

* FIX: [5149 5142 5141 5140 5136] create printer and filament issue

Jira: 5149 5142 5141 5140 5136
5149 process preset name can not show all
5142 improt configs combobox not update
5141 disable modify filament_vendor
5140 disable input Bambu and Generic vendor
5136 preset list window adjust

Change-Id: I111a23996146cc16cc7f533c8616d50223d34c40
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.54

Change-Id: Ifd69c01a82f627a9c6cf4fe0d48a759563ee90e7

* FIX: print model from sdcard with p1p

Change-Id: If85383ba762022ead3dd754ae02a08817b891114
Jira: none

* FIX: dailytips text translation

jira: STUDIO-2556

Change-Id: If44e503615b09ee1692f42ba1f998918ec5bd691

* FIX: clone shortcut key conflict with quit in macos

jira: STUDIO-5166

Change-Id: I548f275bb68d3b0e6bb3cfad6fe93df09d507da3

* FIX:User preset material settings dependent on firmware

JIRA: 5167
Change-Id: I82cf26848594b01155883ad0aa2e9ee77d371fb2

* ENH:update the description of nozzle detection

Change-Id: Id27b25c69dc11fcf66fc82053af705906ae8c370

* FIX: [5159 5165 5171 5172] create printer and filament issue

Jira: 5159 5165 5171 5172
5159 create printer dialog no refresh
5165 create printer 2 step dialog no refersh
5171 change font
5172 edit filament dialog darkUI issue
input special character is prohibited
'/' in preset name translate to '-'
update printer combobox

Change-Id: I5fa27836dab7f604f1a065c65efa099c7a2f0f96
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.55

Change-Id: If1865d561cf274719204662314de163497759e89

* FIX:fix GLmodel deconstruction causing section not to be rendered

Jira: STUDIO-5156
Change-Id: Ibb2f459920989ee54f7b827352dc8893424b4de6

* FIX: missing unlock cause device or resource busy

Change-Id: I87563312ea9c6ce4e4e471da7ce7a02b53b64762

* FIX: some translation

Change-Id: I9758cbc758030b5a3945697a50ca4898af9fcb1b

* ci: update build version to 01.08.00.56

Change-Id: Id5ee53dd2ebb0b37b6927dc58b3cca94a1f66a83

* ENH: remove PLA GLOW in A1 mini

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id99c1bbd4248e28df9150a85eecec831f6f32856

* ci: update build version to 01.08.00.57

Change-Id: Ib4dfa60f097128b76b95bb14ca04978619021b56

* Allow line width of nozzle diameter * 2.5

As it were, 1 mm would be disallowed but 0.99 would be allowed for 0.4
nozzle.  1 mm is the sane maximum and 0.99 is unnecessary tedious to write.

* Russian translation update

Russian translation Bambu Studio_v1.8.0 Beta

* FIX: scale problem in needs_retraction

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idfbe954b22fa6aa5769c55e46874fa6a80ecbf45
(cherry picked from commit 4e853f50b748e3af11e2d64862b6ee557fda361b)

* ENH: CLI: support load_assemble_list

JIRA: STUDIO-4848
Change-Id: Ife11533740988331ea71eac86c370e625970cb8b

* FIX: align to Y not working

This is a bug introduced in 7fbb650 when solving jira STUDIO-4695.
Now we use a more decent way to solve it.

Change-Id: I92deffcb9fe53e8a24c93fe973446ae37df07375
(cherry picked from commit bd98430dbd15eb6c9bb4b447990e0dcf8a50eef0)

* ENH: Add buried points for cut and meshboolean

JIRA: NONE

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I67ce498d0c335dd7a8582f56b880c2c8314f8541

* FIX: 5092 edit filament add scrolled window

Jira: 5092

Change-Id: I53ae996b04e4e2f1b1ddce6a858d505001b11615
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: can not select user preset when create filament

Jira: XXXX
github: 1936
and fix add preset for printer dialog can not show selected printer

Change-Id: Id4308c6bdca17d52d4aa321db359941aa87e0e45
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: template filament don't be show in filament list and sort

Jira: 5160 5179

Change-Id: I56a7e1897e1ef3c061dc66d318896413ca25b76b
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: [5174] export configs dialog issue

filament name too long to can not show all

Jira: 5174

Change-Id: I92018c9d7f86009b78b533592d899b4b5d78c3c8
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: add filament Bambu TPU 95A HF

1.As title

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I752ec43da6297a6c172679997ce68f2318a7b8fb

* ENH: modify some params with filaments

1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in
 A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF
 to 65 and 70 for the other layers

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8

* ENH: add more status during printing

JIRA: STUDIO-5195

Change-Id: I85b3107839c6e2fdecbc10d90a876463e284468c
Signed-off-by: Stone Li <stone.li@bambulab.com>

* FIX:cut imgui has overlapping rendering on Apple

Jira: STUDIO-5150
Change-Id: I7969e19dc189cd617026a183067dad628208955c

* FIX:not TakeSnapshot for m_start_dragging_m

Jira: STUDIO-5176

Change-Id: Ia03e3e2c2664dbdcffa19ec8d0fa97dfd95e6d35

* FIX: rendered color changes

Jira: STUDIO-4956
during the drag processin connectors editing state

Change-Id: I3027176ea9f93a9ba9d6a2052f41aaa4adef79f1

* FIX: merge the patch from Prusa

Thanks for PrusaSlicer and YuSanka
Jira:STUDIO-5175
commit 510d59687b3b19c4a0f4e6540620d0694dd1b7ac
Author: YuSanka <yusanka@gmail.com>
Date:   Thu Oct 5 14:13:14 2023 +0200
    Follow-up 1b451cdf: Fixed #11415 - Connectors disappear when slicing => only when using multiple cut planes AND excluding parts

Change-Id: I9ccd5b85f482d723d21fccf5e104c9e0a9cc4849

* FIX:Press ESC directly to exit after entering the profile rendering

rendering is not normal,Code from PrusaSlicer,thanks for PrusaSlicer and enricoturri1966
commit a078627552f54497ed0518dc7bc349d243576d19
Author: enricoturri1966 <enricoturri@seznam.cz>
Date:   Mon Jan 30 14:00:02 2023 +0100

    Follow-up of 1218103fd620b319c56fd08116f81b581c537188 - Fixed gizmo missbehavior when closing a gizmo by resetting the selection clicking on the scene

Jira: STUDIO-5164
Change-Id: I261da9dba2a5ac37f3e263c175fbccd80d8045bd

* FIX: correct the strings and move create printer dialog center

Jira: 5221 5183

Change-Id: Ida4eba63f0e962ffcc8000fcc04cf20849577217
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: CLI: skip layer height limit validate when slicing for existing models

JIRA: no jira
Change-Id: I1444a28b500ca7d08ed2606eecfa5cfaf261105e

* ENH:update the translation of auto refill

jira:[for translation]

Change-Id: Iaa7b4f3d7cd88c8b4f69a3db721ebd8ca8986eea

* FIX: icon issue for copying

Jira: STUDIO-4168

Icon issue when filling bed with copies

Change-Id: I61a03ecae02b75602c236ed2810e9c9cfe5a19f9
(cherry picked from commit b5079f8a2e79f19f65803f23ef4fd83aff17c84a)

* ENH: update some filament params

1. Modify texture bed temp to 65
2. Modify max-v-speed for ABS
3. Modify some params in Generic PA
4. Modify PLA,PVA params

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce

* FIX: 3770 printable checkbox incorrect display in darkUI

Jira: 3770

Change-Id: I97f67d7a0ffc41f6ee625abeecc52ee4e73cf318

* FIX:Display garbled code in AmsMaterialsSetting pop-up

Change-Id: I50531e939afa7715ae376bac47172ccf7b248114

* ENH:Modifying the Line Color of Transparent Materials

JIRA: STUDIO-4311,5088,4983
Change-Id: I9e63413dc9cd7d523f0f7f1a2e32c4537a84467a

* FIX: crash when async delete printer file

Change-Id: I92c5e812d04da263338fb0eea2fd7583cf9ecde0
Jira: STUDIO-5222

* FIX: 3733 backup time not effective

Jira: 3733

Change-Id: I50c2ce156fcbd0a17aa8a6777bce04aa6093c830
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: enable edit and delete preset btn and fix issue

Jira: XXXX

Change-Id: I724d7236b28fcc4746698f094531948a8fbb5d93
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX:send print job,file name displays error

JIRA:3137
Change-Id: I1c113025d274a13fba1b845a58aada14058fadd4

* FIX: skip hold user preset from sync

Change-Id: I2252246e19bd80903ad82170782ea49535d30d05
Jira: STUDIO-5185

* FIX: 5115 translations

Jira: 5115

Change-Id: I21b03bdd4d28c0bb097226143177e763cf8c777f
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: add link for ironing parameter

Change-Id: I451f5549db3ac2205aa5703a2e5edc831e946af8

* FIX: scale problem in lift type decide

1. Scale the travel threshhold

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib594d640fe63b0919bc9318af88577513f7dbf30

* ENH: add small perimeter speed and threshold

The original param is added by Prusa. Thanks orca for adding threshold.

1. Re add small perimeter speed and threhold.

github: #2221

Change-Id: I35b269b26f085d80f0edca28650bb21fc04898d7

* FIX: modify the picture of pa manual cali

Jira: STUDIO-5102
Change-Id: Id87898959ad4461b7bd2505b159271f2aa589c36

* FIX: Filament preset is the same with the first one

Jira: STUDIO-4519

Filament preset is the same wit the first one, it should align with the
last one.

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I304d0ff0fbc1c8948d410ea552e4d42b6a4e8fd9

* FIX: scoreDailog dark mode issue

Jira: 4570

Change-Id: I8be97b306a1494f73e3bba678ecc864e7ff88ca3

* FIX: CLI: fix the slicing issue while only one object with multicolor using seq-print

JIRA: no-jira
Change-Id: Iea2d23ff8e484bf2fd58aa2f596a8e4e4292fe39

* ENH: open support wall count for normal support

1. open support wall count for normal support
  Enabling this option makes normal support stronger and gives
  better overhang quality, but also more difficult to removal.
  Jira: STUDIO-5192
2. fix a bug where tree support (hybrid style) may get overlapped
  extrusions near the walls.
3. fix a bug where raft layers can't be 1 in tree support
  Jira: STUDIO-5261

Change-Id: Iadc0c67a9b50b5b221c8e83d5aa22ed282018cf8
(cherry picked from commit c0bb0084e386cb70ed6e16edf93190e4b38f5b90)

* FIX: compiling error on linux

jira: none
Change-Id: I1a4563503b5ddf74a1979cc0cee7a15b8aced904
(cherry picked from commit de52c6ca62c9f3a6314ddf5a856c1d8534329886)

* ENH: add translation for small perimeter

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I95013649e4e0c07c0f04b89a91488814c8d228cc

* FIX: clone shortcut key issue on macos

jira: STUDIO-5166

Change-Id: I1967da1d443ed43bd750dad8e11560688d7bd533

* FIX: custom gcode window cannot paste/ navigate

jira: STUDIO-5208、STUDIO-5070

Change-Id: I4ecb9d06cf5db0ae53a4678181aae9298bac106b

* ENH: modify dailytips collapse & expand interaction

jira: STUDIO-5209、STUDIO-5210

Change-Id: Ifb0b998e5004d4b49390ba5a250eaf4743bf3471

* ENH:Add shortcut keys and lists for objects search

JIRA: STUDIO-5157 STUDIO-5158 STUDIO-5240

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Ic7cfaaa9b4bb8a85208bafab7fe3bafdb78f0045

* FIX:Re-calculate button with White Box displayed in dark mode

JIRA: STUDIO-5098

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I07cc6c72d5dbd03b72573cd27dd5938bb0e6a29a

* NEW: display plate index when printing a task

JIRA: STUDIO-2689

display on the thumbnail of the current task

Change-Id: I5f1f46c56e9d1e9120a66d491551908dfad099d6
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH:fixed incorrect path prefix

jira:[for file path prefix]

Change-Id: Ie9e3999f02b78272e528ceceb479e746d46a7e6c

* FIX: thumbnail is not clear in dark mode

JIRA: STUDIO-5087

Change-Id: Ie86493ed71b5554095927f061509a1f551758b61
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>

* FIX: translation

Jira: XXXX

Change-Id: Id03f0d704aa852632a907ea628d1277400112062
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: first nozzle change to 0.4 and nozzle change to mm

Jira: XXXX

Change-Id: I14defd36442dbd7008e46782b08415b6244224f1
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH:editing_window_width's value is small on the laptop

Jira: STUDIO-5238 STUDIO-5265
apply_selected_connectors should check_and_update_connectors_state

Change-Id: I8c2c1c920cc4d197d1908815a3e62f4962335451

* FIX: fix new_bed_shape's calculation process

Jira: STUDIO-5122
Change-Id: I5f3e6a301a297123af28692c90bef6759f425b06

* ENH:update some translations

jira:[STUDIO-5262]

Change-Id: Idb1d3586888043ac325f272bc7a2b788adb3e9e5

* FIX: edit text command resets object settings

Jira: STUDIO-4655

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iac25c4e40f1d0d32e6d1f40e62226cc22bc96042

* ci: update build version to 01.08.00.58

Change-Id: Iacfec02aa50c617e4c9fe566319b07b30d47dce1

* FIX: remove GetUserAgent

Change-Id: I92886e1f0dcb091109231a10da8c19d51178e13b
Jira: STUDIO-5205

* FIX: nozzle_diameter_map data structure adjustment

Change-Id: Ifb724afc0fcf974e6d331e73ecac723107a102cf

* ENH:add _A and _B for perform_with_groove

Jira: STUDIO-5267
Change-Id: Iee3310dfa1cd8e6680310f0af0eff5c817490813

* ENH:is_equal for min_z and max_z

Jira: STUDIO-5267
Change-Id: I9493883d8be9d44e26ddc9afe62b7e9eb09c5052

* ci: update build version to 01.08.00.59

Change-Id: Ie8ed29ccf5d6c94594eb2ab8b717416fbeace3bd

* FIX:Image display unclear in light mode

JIRA:5161
Change-Id: I134cc64a2af0dfff60c47d0ff09d78d9c0f86b3f

* FIX:fix bugs of non manifold edge

Jira: STUDIO-5267

Change-Id: I8ac9a2cf96da0bc07ee00b309e65611b92fd174d

* ENH:nozzle type detection

jira:[STUDIO-5246]

Change-Id: Ic41a2161a0e41d23f56af93ad8ec34cc83ada0e3

* ENH: upadte P1S start gcode

1.turn on MC board fan by default on P1S

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5b2f7868e350942fb8b7baf7d429e22a0987184a
(cherry picked from commit e866a575b6b7d9552f7412f84272f4b48dfc3961)

* ENH: improve support style's tooltip

jira: none
Change-Id: I8ee858d7052f04ce7ea6b226a500c7d1bf8a482f
(cherry picked from commit 665f31c4fcde22bd894cbb4a5fb160635947f2a4)

* ENH: set layer range error to warning

1. If layer range exceeds maximum/minimum layer range in printer
settings,pop up a window to warn

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0304ee790e557ecf967f355c171993d1f51b5057

* ENH: CLI: remove the warning of layer height

JIRA: no jira
Change-Id: Idaceee4f52611479fc3f4238d016d891b4dc8cd1

* FIX: the word search is not translated

Jira: STUDIO-5224

The world search in the device panel is not translated.

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ia3d651c2159a3aad94e10cd0a6da98848f53ee2a
(cherry picked from commit 4a46a0a4750d82d49c9523f4b668a1a00c41ed83)

* FIX: Bitmap will flash when sending printing task

Jira: STUDIO-5278

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ib0c8710b8d5d6b98fad043c950f054aa35bea965

* ENH:display the euler angle of rotation plane

Jira: STUDIO-5268
Change-Id: I6b7b431931d60f1a9a832908400417781798c472

* ci: update build version to 01.08.00.60

Change-Id: I1c15b5c6437554c43327cd6b537f7a5860dba5a0

* ENH:cancel EnterReturnsTrue for imgui in cut

Jira: STUDIO-5269
Change-Id: I2832e1dccaf9755448debe7b2bd56426f90dfe0d

* ci: update build version to 01.08.00.61

Change-Id: Ib03e664a20990322c788686550c491d0139d8237

* FIX: some translation problems

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If9f2af53b4f0bfa9469e84bcba68cc182df4a473

* add: Ukrainian lang support for 1.8

* fix linux

* fix some string and colors

* fix linux build error 2

* fix .gitignore

* FIX: calibration selected preset is null in some case

jira: STUDIO-5258

Change-Id: Iee63593c5f833c5a43e3b1d1c9ddb82f8c69569a

* FIX: create filament issue

Jira: 5296 5297 5295 5302 5311 5276

5296 create filament: list has same printer
5297 create filament: filament combobox has blank options
5298 edit filament: delete last preset prompt users
5302 create filament: filament combox has cili preset
5311 create filament: printer name too long to can not show all
5276 edit filament: PLA Aero filament type filter issue
add prusa vendor
Revised copy

Change-Id: I5dcc615ce0951b1a9953fa12283f6090f5069045

* FIX: some translation

Change-Id: Icb8614a0af18f96d15f3b97c17e0f6f708296847

* FIX:cancel is_equal for slicing function

Jira: STUDIO-5267
Change-Id: I66d759aa2c968f8a28a6a5d8378929754f2db689

* FIX:UI stuck due to pop-up window with wrong chamber temperature

JIRA: 5304
Change-Id: I1a49a7219b7a6f5700243704c348724e7930ce1a

* FIX: allow input '+' and hide edit preset btn

Change-Id: I97aec7c3ac4cc8b9d6c535f0126aaa1926553d86

* ENH: handle printer direct close and not retry

Change-Id: I5dd55f8085cf6383a8420ab41e614ea6ae210c78
Jira: STUDIO-5305

* ci: update build version to 01.08.00.62

Change-Id: I09716bf79354b503197c751272fd3171e0abc8fd

* add: new translation to ukr for AirFlow and Prusa

* add: Texture Plate name fix

* add new feature to localization .de, fix .it (#2876)

* FIX:add slice_facet_for_cut_mesh api for cut tool

and modify section_vertices_map 's traverse
Jira: STUDIO-5267
Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056

Change-Id: I52bfaef8926ef967b78a6cb712a1731a1b528a24

* FIX: Make the front smaller for Czech in device panel

Jira: STUDIO-5151

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I315174b55f923da069854fb4fed8cf3937b82074

* FIX: there is no object can be jumped to in notification

jira: new

Change-Id: Ib81bf49236952ede24a2de126051572d63916e01

* FIX: add height range, modifier in Preview pane will crash

jira: STUDIO-5340

1. fix crash at add height range, modifiers in Preview from objectList
2. fix an assert hit when slicing
3. fix an assert hit when enter AssembleView
4. forbidden popup menu by right-click objectList in Preview

Change-Id: I444bc76b1a4307999b387e4f60386b2d272bd308

* FIX: Black spot in the sending printing task page

Jira: STUDIO-5307

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I3bd97c063ec5f0faf7d12047da39f60ce55cae4b

* FIX: reset_cut_by_contours should update_buffer_data

Jira: STUDIO-5376
Change-Id: I5aacb1f7b65822031d7138abd61a45b09c743531

* ENH:editing_window_width's value is small on the laptop

Jira: STUDIO-5238 STUDIO-5265
Change-Id: Ia958772bcb081817da621115f99328bb62770cd5

* ENH: bumped version to 1.8.1

Change-Id: I9d25403daa5b7b8ca415c0b364670da9e0f932b0

* FIX: create filament dialog: create btn can not show all

Jira: 5310 5331

Change-Id: I185272c90d9ff1c3d6b47abbefbf488d0d965cca

* FIX:update custom_texture when new_shape=false

Jira: STUDIO-5287
Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9

* ENH:editing_window_width's value is small on the laptop

Jira: STUDIO-5238
Change-Id: I9044129f4e0c8ca7469db05b3e547fca4754342a

* FIX:add slash_to_back_slash for saving file path

Jira: STUDIO-5287
Change-Id: I9f3c176cd0831c793958f08601c63efac98176a4

* FIX: a button color didn't response to dark mode change

jira: STUDIO-5315

Change-Id: I95489f01ccd1f77b9e95b0d0f69e5398d2e88487

* FIX: height range layers displayed in wrong position

jira: STUDIO-5341

Change-Id: I83918b4624f367efa54321f1898e1176cdb04ea9

* FIX: auto arranging issues with locked plates

1. global auto arranging may put items overlap with wipe tower if some plates are locked
jira: STUDIO-5329
2. items outside bed may overlap with plate boundary if it's rotated
jira: STUDIO-5329
3. plate-wise auto arranging uses wrong min_obj_distance if the
plate is by-layer printing but global setting is by-object printing
jira: STUDIO-5330

Change-Id: I5dba2f1317e183c9aeec1cb2bd227fbddf4316e6
(cherry picked from commit db1eac41efff5f1e8d5ac0af74c6fc7ab59fc253)

* FIX:  a mistake in upward machine

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibdb26c3d904634f322aef0dc0c7b8867d9fb5854

* FIX:a blank pop-up appears

JIRA:XXXX
Change-Id: Ice92b55204e4897fec024a6d99412eb810bddd4a

* FIX:fixed failure in updating nozzle type

jira:[STUDIO-5248]

Change-Id: Iad37b5d5b76d37cb1723ef21d7c39b1e3fcaf8d7

* FIX:fixed issue with AI monitoring settings

jira:[STUDIO-5082]

Change-Id: I967fe3c1e9da61a55bcbfaa2a8e067dd5af18f72

* FIX:fixed issue with lan mode

jira:[STUDIO-5189]

Change-Id: I1d0a05f19dcea154cf3ef2b61ed0546d3581905e

* FIX:update text for loading or unloading filaments

jira:[STUDIO-5231]

Change-Id: Ic7729c3ec012485b3d87e3d01f11e87502c67895

* FIX: Revert "ENH: do not leave a gap for top...

Revert "ENH: do not leave a gap for top interface if the top z distance is 0"

This reverts commit 79ea32c7cbbdb7e689637980af7c36caf42284c9.

Revert reason: the supports are impossible to remove in some cases.
jira: STUDIO-5385

Change-Id: I376a6f4dfd78da6dfea68b9ac3d552cddd0b4272
(cherry picked from commit 34e38b705fde7f5d7f9a3a89c96a3627ce0c998e)

* ENH: improve normal support's quality

1. Add a base_interface_layer when using Supp.W
2. Fix a bug where base_angle and interface_angle are wong

jira: STUDIO-5386
Change-Id: I52ab32c63b3cd1e6e2ba6463b01ae26699cf13d3
(cherry picked from commit 92ddd4a10b793572a1fa009da5b9e44fcdf81de2)

* NEW:tracking stl model files

jira:[STUDIO-5372]

Change-Id: Idb1275b07441f0cd06c24588d5f7c20f81f1556c

* FIX: edit filament dialog: preset name too long to del btn nan't show

Jira: 5336 5174
and verify string normalization

Change-Id: I380c3bed2bf43d01094b68979a8b67f4187c0b93

* FIX: some translation

Jira: 5232 5300 5334

Change-Id: Ie474ca823011e81aab82a9809af3d6e42980496b

* FIX: some translation

Change-Id: Iaabe6087bed3b7d47d911cf4fb51c770804e72fb

* ENH: change default tree_support_wall_count to 0

Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.

jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)

* FIX:The name of the material in the error prompt is empty

JIRA:STUDIO-4907
Change-Id: I3cf44f099256a51f21a44a89c89c000f734d1f36

* ci: update build version to 01.08.01.51

Change-Id: Ib20f5a12b65472102befec0a2adf82744fc29c46

* FIX: imgui textinput cannot paste on macos

jira: STUDIO-5070、STUDIO-5365

Change-Id: Iea8f41e12744ecda0fbb95c1a8f2e014a7cdc384

* FIX: not cache printer file list on error

Change-Id: I99843aedbf14d3d1d553ccac9b0bd26403274a82
Jira: none

* FIX: thread of close BBLUserPresetExceedLimit notify

Change-Id: I9698134ba1cc91fc83eac441f900d68c4c4b556a

* ENH: Resolve non manifold edges by fixing model interfaces

Jira: STUDIO-5124
Change-Id: I7ea86be44acb80b6c4762a76208b4a031acd0b27

* FIX:nozzle type sync

jira:[STUDIO-5248]

Change-Id: I63d48628832473d8d371ed643dc8528b00382531

* FIX: array bound happen in TriangleSelector::deserialize

Jira: STUDIO-5170
Change-Id: I92b72a887845b462fad208f13607293b44d3d333

* FIX:cropping rendering without considering assembly views

Jira: STUDIO-5260
Change-Id: Ia56cf80b305ae05f25f06ec277f85b3c5430a6df

* FIX: PA for custom filament not available in BL Studio

github: 2971
Change-Id: I6ccd36a183e7367d69557300f7242f5403f4bb33

* FIX: Bitmap is way too small on Mac

Jira: STUDIO-5393

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I6b550669fa8cd5fc9bfa6ed96d64d19a949f01b2

* FIX: move shutdown wait to OnExit

Change-Id: I70d9a2bb686525ae5273aa9d63e25691da4ab65c
Jira: STUDIO-2884

* FIX: calibration manage result dialog issue on macos

jira: STUDIO-4949 STUDIO-5378

Change-Id: I00abefd45a0d274a4b68bb1ab18debe8f91d169e

* FIX: adjust bed shape dialog button UI style

fix that button text is hard to see in dark mode
jira: STUDIO-5247

Change-Id: I2cf5b3cdd2eff9b821bdf5525bec4f329fc58dd1

* FIX: 5331 rescale btn

Jira: STUDIO-5331

Change-Id: If153424b8480e64b166018e3cd98c17db557d0a8
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: support do not generate

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ide9709d95203185538e280517f7aa6136beeda44

* FIX: remove not match printer config ota cache

Change-Id: Ib73fc2ea31fa2186061cfcb5a170bc59b9db84ca
Jira: none

* FIX:cancel the variable of "checkbox_size"  as a fixed value

Jira: STUDIO-5150
Change-Id: I30d876d141b8b35ab4a3fee4889993d87b7c1741

* ENH:add reset_cut_by_contours in on_load function

Jira:STUDIO-5269
m_connector_size_tolerance default value is 0.1f

Change-Id: I6c67fff3cb0c1190e9141ed6f68fbfa848679f35

* ENH:cancel EnterReturnsTrue for imgui in cut

Jira: STUDIO-5269
Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056
Signed-off-by: zhou.xu <zhou.xu@bambulab.com>

* FIX: dailytips should not change content frequently when slicing all

jira: STUDIO-5234

Change-Id: Icb7e9c28404d9db8ebed58d937e13f89c5403b5c

* FIX: objectList clone shortcut key issue

jira: new

Change-Id: Ia75bf58a7d53f962e1af6c2fd97497270b7eea84

* ENH:handling cases without msgs

jira:[STUDIO-5401 STUDIO-5399]

Change-Id: Iae651d5a19a45b0138a6aa621326a8b4a9649824

* ENH: optimize param description

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id0ca9224227a716b21fc0b8430722264dc319344

* ENH: add translation

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3b1f04fee3cd6322793794ad8b8707859f6c7d26

* FIX: close edit preset paramsDialog, mac unresponsive

Jira: 5298

Change-Id: I021e00567354cfb1f2f5f1f2bf6ba1fc35b164c5

* ENH:disable AI monitoring on the p1p series

Change-Id: I514bb1fb1ced6c03dd619230a9adac3be63f2de2

* ci: update build version to 01.08.01.52

Change-Id: I9f5e30d3fc4b7ef9321c522d3c18fce98f03742f

* FIX: close edit preset paramsDialog, mac unresponsive

Change-Id: Ic816754a20b7f6a5cdb46475750eb301fec3ad3a

* FIX: organic support not work with raft only

There is no raft generated when only raft enabled but no support needed.
jira: none

Change-Id: Ic0c9269e2f98038d85c9bc54e4a85f892dc5d764

* FIX: CLI: add object config when assemble

JIRA: no jira
Change-Id: I945f820fb58f2f643170b4b0b66742f6bbbdfd29

* FIX: delete preset prompt

Jira: XXXX

Change-Id: I6511c806c56393d4f6bd72d1c506da59675d49ff

* FIX:Reorganize the assignment of variables of "m_editing_window_width"

Jira: STUDIO-5238
Change-Id: If369916f3f5c21510f5f297bfd05c1230bdda7a4

* ENH: CLI: re-compute flush_volumes_matrix when it is missed

Change-Id: Ie8f53c6bef003b1434de02ea14de5787b376484f

* FIX: some translation for delete filament

Change-Id: Ib46a8eba33f2e21016476aaab4a57a740e86b1b8

* FIX: scrolled window / del preset / edit filament issue

Jira: 5092
GitHub: 1936
edit filament: just one preset, the scroll bar obscures the preset name
edit filament: delete selected preset, click no, but preset be deleted
from UI
edit filament: serial sometimes displays incorrectly

Change-Id: Ibc91609e252179de0c05ca065099756da6631165

* ci: update build version to 01.08.01.53

Change-Id: I5563a2c0812ab9a0d7727df27e17e681066ffa08

---------

Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Signed-off-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: zorro.zhang <zorro.zhang@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: wenjie.guo <wenjie.guo@bambulab.com>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: the Raz <rasmus@abc.se>
Co-authored-by: Andy <andylg@yandex.ru>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz>
Co-authored-by: Dmytro Chystiakov <dlchistyakov@gmail.com>
Co-authored-by: Heiko Liebscher <hliebscher@idn.de>

* Improve arc fitting when new overhang slowdown is used (#2942)

* Set PointerAlignment to Left (#2948)

A lot of the codebase that I have seen typically uses a left justified pointer character. This would update the formatter to also follow that.

* Updated internal bridging flow change and reverted bridge PR (#2943)

Updated internal bridging flow change & reverted bridge PR

* Feature Merge: Fix for inner-outer-inner mode post BBS feature merge (#2949)

Fix for inner-outer-inner mode post BBS feature merge

* disable misleading 3mf version warning

(cherry picked from commit b4b98053834be05a79363a4c6f80d927192c982e)

* thick internal bridges (#2954)

(cherry picked from commit f2f2ede5d5affe24576f9966e6db6ea31ae28101)

* Improve PA calibration Line method so it works for bed origin not in (0,0)

(cherry picked from commit f0522065d8162714c735205af71a35528cb621c8)

* fix lang

* Add a simple subtle outline effect by drawing back faces using wireframe mode (#2934)

* Add a simple subtle outline effect by drawing back faces using wireframe mode

* Show outline in white if the model color is too dark

* Make the outline algorithm more reliable

* Enable cull face, which fix render on Linux

* Fix `disable_cullface`

* Add option to disable emitting M73 gcode (#2114) (#2940)

* Add zhop to PA pattern (#2952)

The current PA pattern implementation does not lift the nozzle
when moving.  The way the pattern is drawn means that the nozzle
is often dragged over already printed lines, which can pull the
pattern off the bed, or damage the lines already drawn. As a
result I often see failed prints with the PA pattern, or moderate
damage to already drawn lines.
This change adds a 1 layer hop between each move to eliminate
nozzle drag.

* Dev 1.9 - Fix Spelling Mistake on Create Printer dialog box (#2961)

* Fix Spelling Mistake on Create Printer dialog box

* Dev 1.9 - Regroup Advanced Quality Options

* Revert "Dev 1.9 - Regroup Advanced Quality Options"

This reverts commit 6ffae875f0b6fef156b61ffb237c0211396f58d9.

* Fix precise wall for Arachne wall generator (#2966)

Update WIKI for it

* Update wxWidgets to v3.2.1 (#2905)

* Upgrade wxWidgets to 3.2.1
Based on prusa3d/PrusaSlicer@9a7e024

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>

* Implement BitmapCache

* update wxExtensions while keeping legacy items

* update dc.DrawBitmap calls to use get_bitmap

* Fix GetSize/Width/Height calls

* update BitmapComboBox

* fix ifndef in wxExtensions.hpp

* update my todos to OcraftyoneTODO

* Get to a compilable state
Everything seems to be working (including the plater). I am not seeing any graphical issues

* fix extruder color icons

* fix crash on opening support tab

* remove GetBmpSize method from DropDown.cpp

* Update TextInput to use bitmap bundles

* update a TODO after testing

* fix the rendering of the icons on combobox

* fix a few todos

* fix WipeTowerDialog.cpp

* Overhaul WipeTowerDialog

Removed simple version of the dialog since BBS removed the functionality but left the code.
Center the table (only seen when the table is smaller than the minimum size of the dialog)
Fix issue where editing a value causes the m_min_flush_label to change colors slightly
Fix an issue where changing a value or running an auto calc changes the disabled value from "-" to "0"

* update a few todos

* Update some todos

* Show dropdown when editing is started

* Update NanoSVG.cmake

Update NanoSVG to work with PR #2780

* Dim the icon on ComboBox when disabled

* solve ObjectDataViewModel todos

leaving colPrint and colEditing cases alone as it does not seem to impact anything

* Update names in wxExtensions

-Rename msw_rescale to sys_color_changed
-Replace GetBmpSize, GetBmpWidth, GetBmpHeight with renamed version (same name without "Bmp")

Both of these changes were also made by PrusaSlicer.

Original Commit: Prusa3D/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>

* update BitmapCache::from_svg

disable finding bundle in the cache to match load_svg
update to match values used in load_svg

* Update ScalableButton

change the signature and remove functions/vars pertaining to a default bmp
fix TODOs in ScalableButton

Original Commit: Prusa3D/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>

* fix up some more todos in wxExtensions

* update ScalableBitmap to use bmp bundles

use wxBitmapBundle by default
add flag to use old scaled bitmap function (specifically to solve issue with advanced toggle)

* attempt to fix macos deps build

* fix ubuntu build

* Revert "attempt to fix macos deps build"

Mistakenly made change to wrong file

This reverts commit d9c20b51216db1d409aeb0420d9d901000ad1b00.

* update wxWidgets patch

an attempt to fix macOS build

* Remove duplicate variable from OrcaSlicer.cpp

* Fix macOS build issue

* Fix blank DataViewItem being added to objects list

* Filament ComboBox editor updates

-Add show drop down feature to ObjectTable
-Call finish editing when ComboBox is closed in ObjectList

* remove Apple specific declarations missed during refactor

* delete old wxWidgets patch

* fix ubuntu seg fault

* include patch from #2926

* update patch to include wxWidgets/wxWidgets@991a74c

* fix deps not compiling on Windows

* update WipeTowerDialog

relocates the recalculate button back to its previous position
changes the wording of the tip message label
add spacing below the matrix

* finish patching wxWidgets

from prusa3d/PrusaSlicer@f8477d1 and prusa3d/PrusaSlicer@066b567

Co-authored-by: YuSanka <yusanka@gmail.com>

* fix combobox crash

* revert outside plate changes

---------

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: YuSanka <yusanka@gmail.com>

* fix an issue that image is not showen in precise wall wiki

* create debug folder automatically

* QOL: Dev 1.9 - Regroup Advanced Quality Options (#2962)

* Dev 1.9 - Regroup Advanced Quality Options

* Regroup Advanced Quality Options

* Regroup advanced quality options and flow rate labels

* Updates labels for consistency. Renamed Order of walls to Walls printing order. Updated walls printing order and print infill first tooltip

* Another option spelling mistake

* Another spelling mistake part 2

* Updated localisation files

* Updated de localisation file post upstream merge to resolve conflicts

* Fix merge error when transferring change to branch.

* update locale file for one more message

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Revert "Add a simple subtle outline effect by drawing back faces using wireframe mode (#2934)"

This reverts commit 0cee51341688996c278b1fa1fbe2af99b66e4fe9.

* QoL: Make sidebar collapsible, resizable, movable, floatable and dockable (#2972)

* Add sidebar docking

* Fix sidebar initial size

* Fix sidebar collapse

* Hide floating sidebar when switch away from model view

* Add option to reset window layout

* Save & load window layout

* Fix a small issue with gcode toggle

* Properly save & restore sidebar state

* Show collapse icon based on sidebar docking state

* Adjust toolbar position based on docking position

* Fix return toolbar position

* Fix plate list position

* Merge upstream BBL changes up to 5th Dec (01.08.01.57) & fix issues with 1.8 BBL merge (#2994)

* FIX: mistake in filament vendor

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3af712e417379d8b98ae18feebffe465bfa1e72d

* NEW:set customized materials for the A1 P1 series

Change-Id: I9c34f62867c074bf9ebb315013e5e40526e0eac7

* FIX: the flow rate ratio crashes after load model

for third party printer
Jira: 5244

Change-Id: Idd829c9d99eeba9d180653ac8de4e51b9a0d6370

* FIX: The maximum value is not printed in PA line mode

Jira: 5046  4951
Change-Id: Ic81f9a75ce7f088fe950fdde283ff5c942cd6e83

* ENH:add preset check for sending files

Change-Id: Ia3313d281b5ce91e277b380498014ffdac5debd3

* FIX: locale loading user preset

Change-Id: I88521e4b10cb802d9253eb79a6b78b3286f15a33
Jira: STUDIO-5436

* FIX: sync user preset notify crash on exit

Change-Id: I88f5dbcbd487293ea847ea6092efb61744399541
Jira: STUDIO-5413

* ci: update build version to 01.08.01.56

Change-Id: Id7a9718d5f920da50d52fd2ef220acf5d3270d3c

* GUI/Field: Fix crash in color picker init (#2220)

wxButton->GetBitmap() may return an invalid wxBitmap.
Guard against this.

* FIX: custom filament preset display in cali history issue

jira: new

Change-Id: I4145450a231adff542ab1a7428b3479f4074e06a

* FIX: meshboolean transform result issue

jira: STUDIO-5425

Change-Id: If66fe909ce4458c1b3192e4fd8a3d758fe7c7eaa

* FIX: fix combobox and delete btn in filament setting enabled

Jira: XXXX

Change-Id: I8b659bd77ceb97c8cea9d3e5e931f4ea50822721

* ci: update build version to 01.08.01.57

Change-Id: I7a6f5439863ca81275ae8b80f1b5cf0bb36c4c0f

* Fix crashing of flow rate calibration post BS 1.8 merge

* Revert Staggered Inner Seam logic from Prusa slicer that was overwritten by the BS1.8 update

---------

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: mia <652892+mia-0@users.noreply.github.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>

* set osx deployment target for openssl

* Only regenerate bed triangles if actually changed (#3039)

* Remove unused bed texture

* Only regenerate bed triangles if actually changed

* Various fix & improvements to collapse sidebar (#3044)

* Fix sidebar collapse button color in dark mode

* Make collapse button half the size

* Add tooltip to sidebar collapse button

* Don't trigger sidebar collapse hotkey twice

* Fix sidebar disable on gcode-only mode

* Fix build error with CGAL 5.6 with -std=gnu++17 on Fedora (#3045)

Fix build with CGAL 5.6

Surface_mesh iterators no longer return references, so it's necessary to
use const references or copies when iterating.

* Fixed a bug that caused curled edge detection not to work as expected for left facing edges when using Arachne. Enabled fan speed control for curled overhangs (#3034)

* Update malformation distance factors (curled edge detection)

* Updated curled detection logic from latest prusa 2.7 release, including updated estimate_points_properties algorithm

Updated curled detection logic from latest prusa 2.7 release, including updated estimate_points_properties algorithm

* Curled distance expansion const introduction

* Enable overhang fan speed logic for curled edges slow downs

* Reverted erroneous change

* Port Emboss & SVG gizmo from PrusaSlicer (#2819)

* Rework UI jobs to make them more understandable and flexible.

* Update Orca specific jobs

* Fix progress issue

* Fix dark mode and window radius

* Update cereal version from 1.2.2 to 1.3.0

(cherry picked from commit prusa3d/PrusaSlicer@057232a2756dad131aba2b989e558bb1560eed93)

* Initial port of Emboss gizmo

* Bump up CGAL version to 5.4

(cherry picked from commit prusa3d/PrusaSlicer@1bf9dee3e7d36a66588bfccb7beda10add154b8a)

* Fix text rotation

* Fix test dragging

* Add text gizmo to right click menu

* Initial port of SVG gizmo

* Fix text rotation

* Fix Linux build

* Fix "from surface"

* Fix -90 rotation

* Fix icon path

* Fix loading font with non-ascii name

* Fix storing non-utf8 font descriptor in 3mf file

* Fix filtering with non-utf8 characters

* Emboss: Use Orca style input dialog

* Fix build on macOS

* Fix tooltip color in light mode

* InputText: fixed incorrect padding when FrameBorder > 0. (ocornut/imgui#4794, ocornut/imgui#3781)
InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794)

(cherry picked from commit ocornut/imgui@072caa4a9068b93070567879afc5fbcbb772c5ae)
(cherry picked from commit ocornut/imgui@bdd2a943150628fdc827c285eafaced6005a2f64)

* SVG: Use Orca style input dialog

* Fix job progress update

* Fix crash when select editing text in preview screen

* Use Orca checkbox style

* Fix issue that toolbar icons are kept regenerated

* Emboss: Fix text & icon alignment

* SVG: Fix text & icon alignment

* Emboss: fix toolbar icon mouse hover state

* Add a simple subtle outline effect by drawing back faces using wireframe mode

* Disable selection outlines

* Show outline in white if the model color is too dark

* Make the outline algorithm more reliable

* Enable cull face, which fix render on Linux

* Fix `disable_cullface`

* Post merge fix

* Optimize selection rendering

* Fix scale gizmo

* Emboss: Fix text rotation if base object is scaled

* Fix volume synchronize

* Fix emboss rotation

* Emboss: Fix advance toggle

* Fix text position after reopened the project

* Make font style preview darker

* Make font style preview selector height shorter

---------

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: ocornut <omarcornut@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>

* Fix btt tft thumbnail regression (#3056)

fix btt tft thumbnail regression

* Updated PA test to address crash when default line width was zero (#3055)

Updated PA test address "bug" #3043

* Fixed a regression issue that wrong accel was used for PA Line

* fix

* fix add_to_galaxyslicer_cmake_project

* update user agent

* fix galaxy

* fix

* fix deps

* fix build

* fix

* Add ColPic encoding for thumbnails(;gimage/;simage) as metadata.
This will enable showing preview images on QIDI/Elegoo machines

* Fix a regression that thumbnails were not zoomed properly

* fix exhaust fan

* fix preset

* fix printer

* Fix #2662 - "Extra length on restart" setting is ignored when wipe is enabled (#3065)

Fix #2662

* some fixes

* icns

* Fix

* Adds rotate on stl import (#3116)

* Adds rotate on stl import

* Fixed comma placement

* update location of rotate variables

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne (#3014)

Improve toolpath simplification to avoid blemishes when using Arachne on thin walls.

Co-authored-by: SoftFever <softfeverever@gmail.com>

* fix

* Fix value passed to SPEED in air-filteration.md macro. (#3133)

Fix value passed to SPEED

The SPEED parameter of SET_FAN_SPEED needs to be between 0.0  and 1.0. Since the S param, which is between 0 and 255, was being passed as is to SPEED, it effectively resulted in the target fan running at 100% if any value > 0 was passed to M106.

* Update M106 macro for auxiliary fan. fix is by @IntenseWiggling from PR #3133

* Fix checking is volume svg (#3129)

(cherry picked from commit prusa3d/PrusaSlicer@f31d7f1d8c9b6d65295521bbbcbcd48c64879727)

Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@Prusa3D.cz>

* Updated wipe logic to respect retraction speed during wiping (#3094)

* Wipe retraction adjusted based on available wipe distance and retraction speed

* Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option.

* Wipe improvements: Spelling & grammar

* Revert "Wipe improvements: Spelling & grammar"

This reverts commit c8f8612b3f3755945584f69fad43b94d767e07ae.

* Revert "Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option."

This reverts commit ba515ffb628d193484c860d8f142fce66be1b985.

* Wipe improvements: Using retraction before wipe parameter to judge when to do excess retraction

* Wipe Improvements: Floating point comparison check

* Wipe Improvements: Refactoring the code

* Wipe Improvements: Updated Wipe Distance tool tip

* Wipe Improvements: Removed redundant code

* Wipe Improvements: Use unscale_

* Do not limit the max window size (#2889) (#3142)

* fix galaxy

* Tweak dailytip: remove images/added a few new tips

* color

* Fix window maximize when task bar is on the left. (#3148)

Partially revert fe80dc6

* Revert "Fix window maximize when task bar is on the left. (#3148)"

This reverts commit 0f87fdb98b7d09bae4d7bec390b74162c8ecbc39.

* Revert "Do not limit the max window size (#2889) (#3142)"

This reverts commit fe80dc6ca6fb873fb847c165adc5578ee65a58b4.

* Full re-write of spiral vase (#3091)

* Practically full re-write of spiral vase
- Adds transition out to prevent sharp edge at the top of spiral vase.
- Adds XY interpolation
- Adds option to turn XY interpolation on/off

* - Increasing E to 5 decimal digits (I observed uneven flow with less than that)
- Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves)

* - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter
- fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled!

* - Avoiding namespace pollution
- Fixing dist_XY == 0 bug

---------

Co-authored-by: Andrew Boktor <aboktor@microsoft.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>

* Fixed a regression that non spiral vase mode was broken. #3091

* object cancel support for Prusa/Marlin/RRF

* fix pot

* fix lang

* fix de

* fix

* fix de

* Move downloaded deps into DL_CACHE subfolder

* Fix regression that shell is not rendered unless slice is completed (#3181)

* Fix issue that `is_update_alpha` doesn't work

* Fix regression that shell is not rendered unless slice is completed

* Format

* Turkish words were edited. (#3184)

* Update OrcaSlicer_tr.po

New English terms were translated into Turkish.

* Update OrcaSlicer_tr.po

* Turkish language sentences were added.

* Turkish words were edited.

* Turkish words were edited.

* Turkish words were edited.

* Turkish words were edited.

* Turkish words were edited.

* kor translation update (#3163)

* Fix sidebar not shown when open 3mf file from command line arg (#3172)

* Show sidebar when open file from cmd

* Fix issue that sidebar collapse button is not enabled when load 3mf file with gcode

* Fix unicode path for nanosvg (#3179)

* fix lang

* fix pwsh variable in CICD (#3188)

* cp script

* Feature/merge 1.8.2 (#3193)

* FIX: user preset sync token

Change-Id: Id2aa865b778ee9ac4cfddb68ceef0374507b519b
Jira: none

* FIX: Bitmap cache not take effect

Change-Id: I972098fdbda0b4542c6c759a8f5e1f0f2a30852b
Jira: STUDIO-4991

* NEW: Open HotModel Link With GetParam-From bambustudio

JIRA: NO JIRA

Change-Id: I4ac49bac5ee0c50988c76a38b00b7ba7dc3201f5

* NEW:AmsMaterialsSetting Support for user-preset

JIRA: STUDIO-5135
Change-Id: If848047cd5dbd059d440de30989c505c361305a7

* FIX: upload custom root preset fail

Change-Id: I621c8d542dd604b07cc5df63d97d7a31558d3aba
Jira: none

* FIX: show custom filament in AMS filament list

Change-Id: I79b9f8f2f08db8c52bbed76f1ea133baff383c00
Jira: none

* FIX: dailytips window and gcodeviwer legend window size issue

reset to original logic of dailytips and legend window size

jira: new

Change-Id: Iacb016bb222ba3f87317cfbe1f2b003802d773a5

* ENH: add text translation

jira: new

Change-Id: I780cfb8a0a64d806b5e0a414b6598e3b7bdf52dc

* FIX: Delete and search object outside the plate

JIRA:
1. STUDIO-5132 Deleting object outside the plate will crash
2. STUDIO-5146 The search function cannot search for object outside the plate

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I84cb3fe990a9c2a182e7434c262466a70545280e

* FIX: [5149 5142 5141 5140 5136] create printer and filament issue

Jira: 5149 5142 5141 5140 5136
5149 process preset name can not show all
5142 improt configs combobox not update
5141 disable modify filament_vendor
5140 disable input Bambu and Generic vendor
5136 preset list window adjust

Change-Id: I111a23996146cc16cc7f533c8616d50223d34c40
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.54

Change-Id: Ifd69c01a82f627a9c6cf4fe0d48a759563ee90e7

* FIX: print model from sdcard with p1p

Change-Id: If85383ba762022ead3dd754ae02a08817b891114
Jira: none

* FIX: dailytips text translation

jira: STUDIO-2556

Change-Id: If44e503615b09ee1692f42ba1f998918ec5bd691

* FIX: clone shortcut key conflict with quit in macos

jira: STUDIO-5166

Change-Id: I548f275bb68d3b0e6bb3cfad6fe93df09d507da3

* FIX:User preset material settings dependent on firmware

JIRA: 5167
Change-Id: I82cf26848594b01155883ad0aa2e9ee77d371fb2

* ENH:update the description of nozzle detection

Change-Id:…
J-DRD added a commit to J-DRD/GalaxySlicer that referenced this issue Feb 11, 2024
* Add zhop to PA pattern (#2952)

The current PA pattern implementation does not lift the nozzle
when moving.  The way the pattern is drawn means that the nozzle
is often dragged over already printed lines, which can pull the
pattern off the bed, or damage the lines already drawn. As a
result I often see failed prints with the PA pattern, or moderate
damage to already drawn lines.
This change adds a 1 layer hop between each move to eliminate
nozzle drag.

* Dev 1.9 - Fix Spelling Mistake on Create Printer dialog box (#2961)

* Fix Spelling Mistake on Create Printer dialog box

* Dev 1.9 - Regroup Advanced Quality Options

* Revert "Dev 1.9 - Regroup Advanced Quality Options"

This reverts commit 6ffae875f0b6fef156b61ffb237c0211396f58d9.

* Fix precise wall for Arachne wall generator (#2966)

Update WIKI for it

* Update wxWidgets to v3.2.1 (#2905)

* Upgrade wxWidgets to 3.2.1
Based on prusa3d/PrusaSlicer@9a7e024

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>

* Implement BitmapCache

* update wxExtensions while keeping legacy items

* update dc.DrawBitmap calls to use get_bitmap

* Fix GetSize/Width/Height calls

* update BitmapComboBox

* fix ifndef in wxExtensions.hpp

* update my todos to OcraftyoneTODO

* Get to a compilable state
Everything seems to be working (including the plater). I am not seeing any graphical issues

* fix extruder color icons

* fix crash on opening support tab

* remove GetBmpSize method from DropDown.cpp

* Update TextInput to use bitmap bundles

* update a TODO after testing

* fix the rendering of the icons on combobox

* fix a few todos

* fix WipeTowerDialog.cpp

* Overhaul WipeTowerDialog

Removed simple version of the dialog since BBS removed the functionality but left the code.
Center the table (only seen when the table is smaller than the minimum size of the dialog)
Fix issue where editing a value causes the m_min_flush_label to change colors slightly
Fix an issue where changing a value or running an auto calc changes the disabled value from "-" to "0"

* update a few todos

* Update some todos

* Show dropdown when editing is started

* Update NanoSVG.cmake

Update NanoSVG to work with PR #2780

* Dim the icon on ComboBox when disabled

* solve ObjectDataViewModel todos

leaving colPrint and colEditing cases alone as it does not seem to impact anything

* Update names in wxExtensions

-Rename msw_rescale to sys_color_changed
-Replace GetBmpSize, GetBmpWidth, GetBmpHeight with renamed version (same name without "Bmp")

Both of these changes were also made by PrusaSlicer.

Original Commit: Prusa3D/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>

* update BitmapCache::from_svg

disable finding bundle in the cache to match load_svg
update to match values used in load_svg

* Update ScalableButton

change the signature and remove functions/vars pertaining to a default bmp
fix TODOs in ScalableButton

Original Commit: Prusa3D/PrusaSlicer@066b567
Co-authored-by: YuSanka <yusanka@gmail.com>

* fix up some more todos in wxExtensions

* update ScalableBitmap to use bmp bundles

use wxBitmapBundle by default
add flag to use old scaled bitmap function (specifically to solve issue with advanced toggle)

* attempt to fix macos deps build

* fix ubuntu build

* Revert "attempt to fix macos deps build"

Mistakenly made change to wrong file

This reverts commit d9c20b51216db1d409aeb0420d9d901000ad1b00.

* update wxWidgets patch

an attempt to fix macOS build

* Remove duplicate variable from OrcaSlicer.cpp

* Fix macOS build issue

* Fix blank DataViewItem being added to objects list

* Filament ComboBox editor updates

-Add show drop down feature to ObjectTable
-Call finish editing when ComboBox is closed in ObjectList

* remove Apple specific declarations missed during refactor

* delete old wxWidgets patch

* fix ubuntu seg fault

* include patch from #2926

* update patch to include wxWidgets/wxWidgets@991a74c

* fix deps not compiling on Windows

* update WipeTowerDialog

relocates the recalculate button back to its previous position
changes the wording of the tip message label
add spacing below the matrix

* finish patching wxWidgets

from prusa3d/PrusaSlicer@f8477d1 and prusa3d/PrusaSlicer@066b567

Co-authored-by: YuSanka <yusanka@gmail.com>

* fix combobox crash

* revert outside plate changes

---------

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: YuSanka <yusanka@gmail.com>

* fix an issue that image is not showen in precise wall wiki

* create debug folder automatically

* QOL: Dev 1.9 - Regroup Advanced Quality Options (#2962)

* Dev 1.9 - Regroup Advanced Quality Options

* Regroup Advanced Quality Options

* Regroup advanced quality options and flow rate labels

* Updates labels for consistency. Renamed Order of walls to Walls printing order. Updated walls printing order and print infill first tooltip

* Another option spelling mistake

* Another spelling mistake part 2

* Updated localisation files

* Updated de localisation file post upstream merge to resolve conflicts

* Fix merge error when transferring change to branch.

* update locale file for one more message

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Revert "Add a simple subtle outline effect by drawing back faces using wireframe mode (#2934)"

This reverts commit 0cee51341688996c278b1fa1fbe2af99b66e4fe9.

* QoL: Make sidebar collapsible, resizable, movable, floatable and dockable (#2972)

* Add sidebar docking

* Fix sidebar initial size

* Fix sidebar collapse

* Hide floating sidebar when switch away from model view

* Add option to reset window layout

* Save & load window layout

* Fix a small issue with gcode toggle

* Properly save & restore sidebar state

* Show collapse icon based on sidebar docking state

* Adjust toolbar position based on docking position

* Fix return toolbar position

* Fix plate list position

* Merge upstream BBL changes up to 5th Dec (01.08.01.57) & fix issues with 1.8 BBL merge (#2994)

* FIX: mistake in filament vendor

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3af712e417379d8b98ae18feebffe465bfa1e72d

* NEW:set customized materials for the A1 P1 series

Change-Id: I9c34f62867c074bf9ebb315013e5e40526e0eac7

* FIX: the flow rate ratio crashes after load model

for third party printer
Jira: 5244

Change-Id: Idd829c9d99eeba9d180653ac8de4e51b9a0d6370

* FIX: The maximum value is not printed in PA line mode

Jira: 5046  4951
Change-Id: Ic81f9a75ce7f088fe950fdde283ff5c942cd6e83

* ENH:add preset check for sending files

Change-Id: Ia3313d281b5ce91e277b380498014ffdac5debd3

* FIX: locale loading user preset

Change-Id: I88521e4b10cb802d9253eb79a6b78b3286f15a33
Jira: STUDIO-5436

* FIX: sync user preset notify crash on exit

Change-Id: I88f5dbcbd487293ea847ea6092efb61744399541
Jira: STUDIO-5413

* ci: update build version to 01.08.01.56

Change-Id: Id7a9718d5f920da50d52fd2ef220acf5d3270d3c

* GUI/Field: Fix crash in color picker init (#2220)

wxButton->GetBitmap() may return an invalid wxBitmap.
Guard against this.

* FIX: custom filament preset display in cali history issue

jira: new

Change-Id: I4145450a231adff542ab1a7428b3479f4074e06a

* FIX: meshboolean transform result issue

jira: STUDIO-5425

Change-Id: If66fe909ce4458c1b3192e4fd8a3d758fe7c7eaa

* FIX: fix combobox and delete btn in filament setting enabled

Jira: XXXX

Change-Id: I8b659bd77ceb97c8cea9d3e5e931f4ea50822721

* ci: update build version to 01.08.01.57

Change-Id: I7a6f5439863ca81275ae8b80f1b5cf0bb36c4c0f

* Fix crashing of flow rate calibration post BS 1.8 merge

* Revert Staggered Inner Seam logic from Prusa slicer that was overwritten by the BS1.8 update

---------

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: mia <652892+mia-0@users.noreply.github.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>

* set osx deployment target for openssl

* Only regenerate bed triangles if actually changed (#3039)

* Remove unused bed texture

* Only regenerate bed triangles if actually changed

* Various fix & improvements to collapse sidebar (#3044)

* Fix sidebar collapse button color in dark mode

* Make collapse button half the size

* Add tooltip to sidebar collapse button

* Don't trigger sidebar collapse hotkey twice

* Fix sidebar disable on gcode-only mode

* Fix build error with CGAL 5.6 with -std=gnu++17 on Fedora (#3045)

Fix build with CGAL 5.6

Surface_mesh iterators no longer return references, so it's necessary to
use const references or copies when iterating.

* Fixed a bug that caused curled edge detection not to work as expected for left facing edges when using Arachne. Enabled fan speed control for curled overhangs (#3034)

* Update malformation distance factors (curled edge detection)

* Updated curled detection logic from latest prusa 2.7 release, including updated estimate_points_properties algorithm

Updated curled detection logic from latest prusa 2.7 release, including updated estimate_points_properties algorithm

* Curled distance expansion const introduction

* Enable overhang fan speed logic for curled edges slow downs

* Reverted erroneous change

* Port Emboss & SVG gizmo from PrusaSlicer (#2819)

* Rework UI jobs to make them more understandable and flexible.

* Update Orca specific jobs

* Fix progress issue

* Fix dark mode and window radius

* Update cereal version from 1.2.2 to 1.3.0

(cherry picked from commit prusa3d/PrusaSlicer@057232a2756dad131aba2b989e558bb1560eed93)

* Initial port of Emboss gizmo

* Bump up CGAL version to 5.4

(cherry picked from commit prusa3d/PrusaSlicer@1bf9dee3e7d36a66588bfccb7beda10add154b8a)

* Fix text rotation

* Fix test dragging

* Add text gizmo to right click menu

* Initial port of SVG gizmo

* Fix text rotation

* Fix Linux build

* Fix "from surface"

* Fix -90 rotation

* Fix icon path

* Fix loading font with non-ascii name

* Fix storing non-utf8 font descriptor in 3mf file

* Fix filtering with non-utf8 characters

* Emboss: Use Orca style input dialog

* Fix build on macOS

* Fix tooltip color in light mode

* InputText: fixed incorrect padding when FrameBorder > 0. (ocornut/imgui#4794, ocornut/imgui#3781)
InputTextMultiline: fixed vertical tracking with large values of FramePadding.y. (ocornut/imgui#3781, ocornut/imgui#4794)

(cherry picked from commit ocornut/imgui@072caa4a9068b93070567879afc5fbcbb772c5ae)
(cherry picked from commit ocornut/imgui@bdd2a943150628fdc827c285eafaced6005a2f64)

* SVG: Use Orca style input dialog

* Fix job progress update

* Fix crash when select editing text in preview screen

* Use Orca checkbox style

* Fix issue that toolbar icons are kept regenerated

* Emboss: Fix text & icon alignment

* SVG: Fix text & icon alignment

* Emboss: fix toolbar icon mouse hover state

* Add a simple subtle outline effect by drawing back faces using wireframe mode

* Disable selection outlines

* Show outline in white if the model color is too dark

* Make the outline algorithm more reliable

* Enable cull face, which fix render on Linux

* Fix `disable_cullface`

* Post merge fix

* Optimize selection rendering

* Fix scale gizmo

* Emboss: Fix text rotation if base object is scaled

* Fix volume synchronize

* Fix emboss rotation

* Emboss: Fix advance toggle

* Fix text position after reopened the project

* Make font style preview darker

* Make font style preview selector height shorter

---------

Co-authored-by: tamasmeszaros <meszaros.q@gmail.com>
Co-authored-by: ocornut <omarcornut@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>

* Fix btt tft thumbnail regression (#3056)

fix btt tft thumbnail regression

* Updated PA test to address crash when default line width was zero (#3055)

Updated PA test address "bug" #3043

* Fixed a regression issue that wrong accel was used for PA Line

* fix

* fix add_to_galaxyslicer_cmake_project

* update user agent

* fix galaxy

* fix

* fix deps

* fix build

* fix

* Add ColPic encoding for thumbnails(;gimage/;simage) as metadata.
This will enable showing preview images on QIDI/Elegoo machines

* Fix a regression that thumbnails were not zoomed properly

* fix exhaust fan

* fix preset

* fix printer

* Fix #2662 - "Extra length on restart" setting is ignored when wipe is enabled (#3065)

Fix #2662

* some fixes

* icns

* Fix

* Adds rotate on stl import (#3116)

* Adds rotate on stl import

* Fixed comma placement

* update location of rotate variables

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne (#3014)

Improve toolpath simplification to avoid blemishes when using Arachne on thin walls.

Co-authored-by: SoftFever <softfeverever@gmail.com>

* fix

* Fix value passed to SPEED in air-filteration.md macro. (#3133)

Fix value passed to SPEED

The SPEED parameter of SET_FAN_SPEED needs to be between 0.0  and 1.0. Since the S param, which is between 0 and 255, was being passed as is to SPEED, it effectively resulted in the target fan running at 100% if any value > 0 was passed to M106.

* Update M106 macro for auxiliary fan. fix is by @IntenseWiggling from PR #3133

* Fix checking is volume svg (#3129)

(cherry picked from commit prusa3d/PrusaSlicer@f31d7f1d8c9b6d65295521bbbcbcd48c64879727)

Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@Prusa3D.cz>

* Updated wipe logic to respect retraction speed during wiping (#3094)

* Wipe retraction adjusted based on available wipe distance and retraction speed

* Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option.

* Wipe improvements: Spelling & grammar

* Revert "Wipe improvements: Spelling & grammar"

This reverts commit c8f8612b3f3755945584f69fad43b94d767e07ae.

* Revert "Wipe Improvements: Removed debug code, removed retract before wipe and made the respect retract speed an option."

This reverts commit ba515ffb628d193484c860d8f142fce66be1b985.

* Wipe improvements: Using retraction before wipe parameter to judge when to do excess retraction

* Wipe Improvements: Floating point comparison check

* Wipe Improvements: Refactoring the code

* Wipe Improvements: Updated Wipe Distance tool tip

* Wipe Improvements: Removed redundant code

* Wipe Improvements: Use unscale_

* Do not limit the max window size (#2889) (#3142)

* fix galaxy

* Tweak dailytip: remove images/added a few new tips

* color

* Fix window maximize when task bar is on the left. (#3148)

Partially revert fe80dc6

* Revert "Fix window maximize when task bar is on the left. (#3148)"

This reverts commit 0f87fdb98b7d09bae4d7bec390b74162c8ecbc39.

* Revert "Do not limit the max window size (#2889) (#3142)"

This reverts commit fe80dc6ca6fb873fb847c165adc5578ee65a58b4.

* Full re-write of spiral vase (#3091)

* Practically full re-write of spiral vase
- Adds transition out to prevent sharp edge at the top of spiral vase.
- Adds XY interpolation
- Adds option to turn XY interpolation on/off

* - Increasing E to 5 decimal digits (I observed uneven flow with less than that)
- Excluding all travel moves (I saw a bug where somehow we ended up with travel moves within the print so excluding all travel moves)

* - max_xy_smoothing is now configurable, default is 200% of nozzle_diameter
- fixed no-op travel moves in the middle of spiral that now show up as defects when Smooth Spiral is enabled!

* - Avoiding namespace pollution
- Fixing dist_XY == 0 bug

---------

Co-authored-by: Andrew Boktor <aboktor@microsoft.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>

* Fixed a regression that non spiral vase mode was broken. #3091

* object cancel support for Prusa/Marlin/RRF

* fix pot

* fix lang

* fix de

* fix

* fix de

* Move downloaded deps into DL_CACHE subfolder

* Fix regression that shell is not rendered unless slice is completed (#3181)

* Fix issue that `is_update_alpha` doesn't work

* Fix regression that shell is not rendered unless slice is completed

* Format

* Turkish words were edited. (#3184)

* Update OrcaSlicer_tr.po

New English terms were translated into Turkish.

* Update OrcaSlicer_tr.po

* Turkish language sentences were added.

* Turkish words were edited.

* Turkish words were edited.

* Turkish words were edited.

* Turkish words were edited.

* Turkish words were edited.

* kor translation update (#3163)

* Fix sidebar not shown when open 3mf file from command line arg (#3172)

* Show sidebar when open file from cmd

* Fix issue that sidebar collapse button is not enabled when load 3mf file with gcode

* Fix unicode path for nanosvg (#3179)

* fix lang

* fix pwsh variable in CICD (#3188)

* cp script

* Feature/merge 1.8.2 (#3193)

* FIX: user preset sync token

Change-Id: Id2aa865b778ee9ac4cfddb68ceef0374507b519b
Jira: none

* FIX: Bitmap cache not take effect

Change-Id: I972098fdbda0b4542c6c759a8f5e1f0f2a30852b
Jira: STUDIO-4991

* NEW: Open HotModel Link With GetParam-From bambustudio

JIRA: NO JIRA

Change-Id: I4ac49bac5ee0c50988c76a38b00b7ba7dc3201f5

* NEW:AmsMaterialsSetting Support for user-preset

JIRA: STUDIO-5135
Change-Id: If848047cd5dbd059d440de30989c505c361305a7

* FIX: upload custom root preset fail

Change-Id: I621c8d542dd604b07cc5df63d97d7a31558d3aba
Jira: none

* FIX: show custom filament in AMS filament list

Change-Id: I79b9f8f2f08db8c52bbed76f1ea133baff383c00
Jira: none

* FIX: dailytips window and gcodeviwer legend window size issue

reset to original logic of dailytips and legend window size

jira: new

Change-Id: Iacb016bb222ba3f87317cfbe1f2b003802d773a5

* ENH: add text translation

jira: new

Change-Id: I780cfb8a0a64d806b5e0a414b6598e3b7bdf52dc

* FIX: Delete and search object outside the plate

JIRA:
1. STUDIO-5132 Deleting object outside the plate will crash
2. STUDIO-5146 The search function cannot search for object outside the plate

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I84cb3fe990a9c2a182e7434c262466a70545280e

* FIX: [5149 5142 5141 5140 5136] create printer and filament issue

Jira: 5149 5142 5141 5140 5136
5149 process preset name can not show all
5142 improt configs combobox not update
5141 disable modify filament_vendor
5140 disable input Bambu and Generic vendor
5136 preset list window adjust

Change-Id: I111a23996146cc16cc7f533c8616d50223d34c40
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.54

Change-Id: Ifd69c01a82f627a9c6cf4fe0d48a759563ee90e7

* FIX: print model from sdcard with p1p

Change-Id: If85383ba762022ead3dd754ae02a08817b891114
Jira: none

* FIX: dailytips text translation

jira: STUDIO-2556

Change-Id: If44e503615b09ee1692f42ba1f998918ec5bd691

* FIX: clone shortcut key conflict with quit in macos

jira: STUDIO-5166

Change-Id: I548f275bb68d3b0e6bb3cfad6fe93df09d507da3

* FIX:User preset material settings dependent on firmware

JIRA: 5167
Change-Id: I82cf26848594b01155883ad0aa2e9ee77d371fb2

* ENH:update the description of nozzle detection

Change-Id: Id27b25c69dc11fcf66fc82053af705906ae8c370

* FIX: [5159 5165 5171 5172] create printer and filament issue

Jira: 5159 5165 5171 5172
5159 create printer dialog no refresh
5165 create printer 2 step dialog no refersh
5171 change font
5172 edit filament dialog darkUI issue
input special character is prohibited
'/' in preset name translate to '-'
update printer combobox

Change-Id: I5fa27836dab7f604f1a065c65efa099c7a2f0f96
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ci: update build version to 01.08.00.55

Change-Id: If1865d561cf274719204662314de163497759e89

* FIX:fix GLmodel deconstruction causing section not to be rendered

Jira: STUDIO-5156
Change-Id: Ibb2f459920989ee54f7b827352dc8893424b4de6

* FIX: missing unlock cause device or resource busy

Change-Id: I87563312ea9c6ce4e4e471da7ce7a02b53b64762

* FIX: some translation

Change-Id: I9758cbc758030b5a3945697a50ca4898af9fcb1b

* ci: update build version to 01.08.00.56

Change-Id: Id5ee53dd2ebb0b37b6927dc58b3cca94a1f66a83

* ENH: remove PLA GLOW in A1 mini

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id99c1bbd4248e28df9150a85eecec831f6f32856

* ci: update build version to 01.08.00.57

Change-Id: Ib4dfa60f097128b76b95bb14ca04978619021b56

* Allow line width of nozzle diameter * 2.5

As it were, 1 mm would be disallowed but 0.99 would be allowed for 0.4
nozzle.  1 mm is the sane maximum and 0.99 is unnecessary tedious to write.

* Russian translation update

Russian translation Bambu Studio_v1.8.0 Beta

* FIX: scale problem in needs_retraction

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Idfbe954b22fa6aa5769c55e46874fa6a80ecbf45
(cherry picked from commit 4e853f50b748e3af11e2d64862b6ee557fda361b)

* ENH: CLI: support load_assemble_list

JIRA: STUDIO-4848
Change-Id: Ife11533740988331ea71eac86c370e625970cb8b

* FIX: align to Y not working

This is a bug introduced in 7fbb650 when solving jira STUDIO-4695.
Now we use a more decent way to solve it.

Change-Id: I92deffcb9fe53e8a24c93fe973446ae37df07375
(cherry picked from commit bd98430dbd15eb6c9bb4b447990e0dcf8a50eef0)

* ENH: Add buried points for cut and meshboolean

JIRA: NONE

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I67ce498d0c335dd7a8582f56b880c2c8314f8541

* FIX: 5092 edit filament add scrolled window

Jira: 5092

Change-Id: I53ae996b04e4e2f1b1ddce6a858d505001b11615
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: can not select user preset when create filament

Jira: XXXX
github: 1936
and fix add preset for printer dialog can not show selected printer

Change-Id: Id4308c6bdca17d52d4aa321db359941aa87e0e45
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: template filament don't be show in filament list and sort

Jira: 5160 5179

Change-Id: I56a7e1897e1ef3c061dc66d318896413ca25b76b
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: [5174] export configs dialog issue

filament name too long to can not show all

Jira: 5174

Change-Id: I92018c9d7f86009b78b533592d899b4b5d78c3c8
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: add filament Bambu TPU 95A HF

1.As title

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I752ec43da6297a6c172679997ce68f2318a7b8fb

* ENH: modify some params with filaments

1.Modify the PEI bed temperature of PLA Basic, Matte, and Tough to 65 in
 A1 mini. Set the bed temperature for the first layer of Bambu PETG-CF
 to 65 and 70 for the other layers

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia902bbb7f824082d5346709d781cac64296f47a8

* ENH: add more status during printing

JIRA: STUDIO-5195

Change-Id: I85b3107839c6e2fdecbc10d90a876463e284468c
Signed-off-by: Stone Li <stone.li@bambulab.com>

* FIX:cut imgui has overlapping rendering on Apple

Jira: STUDIO-5150
Change-Id: I7969e19dc189cd617026a183067dad628208955c

* FIX:not TakeSnapshot for m_start_dragging_m

Jira: STUDIO-5176

Change-Id: Ia03e3e2c2664dbdcffa19ec8d0fa97dfd95e6d35

* FIX: rendered color changes

Jira: STUDIO-4956
during the drag processin connectors editing state

Change-Id: I3027176ea9f93a9ba9d6a2052f41aaa4adef79f1

* FIX: merge the patch from Prusa

Thanks for PrusaSlicer and YuSanka
Jira:STUDIO-5175
commit 510d59687b3b19c4a0f4e6540620d0694dd1b7ac
Author: YuSanka <yusanka@gmail.com>
Date:   Thu Oct 5 14:13:14 2023 +0200
    Follow-up 1b451cdf: Fixed #11415 - Connectors disappear when slicing => only when using multiple cut planes AND excluding parts

Change-Id: I9ccd5b85f482d723d21fccf5e104c9e0a9cc4849

* FIX:Press ESC directly to exit after entering the profile rendering

rendering is not normal,Code from PrusaSlicer,thanks for PrusaSlicer and enricoturri1966
commit a078627552f54497ed0518dc7bc349d243576d19
Author: enricoturri1966 <enricoturri@seznam.cz>
Date:   Mon Jan 30 14:00:02 2023 +0100

    Follow-up of 1218103fd620b319c56fd08116f81b581c537188 - Fixed gizmo missbehavior when closing a gizmo by resetting the selection clicking on the scene

Jira: STUDIO-5164
Change-Id: I261da9dba2a5ac37f3e263c175fbccd80d8045bd

* FIX: correct the strings and move create printer dialog center

Jira: 5221 5183

Change-Id: Ida4eba63f0e962ffcc8000fcc04cf20849577217
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: CLI: skip layer height limit validate when slicing for existing models

JIRA: no jira
Change-Id: I1444a28b500ca7d08ed2606eecfa5cfaf261105e

* ENH:update the translation of auto refill

jira:[for translation]

Change-Id: Iaa7b4f3d7cd88c8b4f69a3db721ebd8ca8986eea

* FIX: icon issue for copying

Jira: STUDIO-4168

Icon issue when filling bed with copies

Change-Id: I61a03ecae02b75602c236ed2810e9c9cfe5a19f9
(cherry picked from commit b5079f8a2e79f19f65803f23ef4fd83aff17c84a)

* ENH: update some filament params

1. Modify texture bed temp to 65
2. Modify max-v-speed for ABS
3. Modify some params in Generic PA
4. Modify PLA,PVA params

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I42584a6015b8526f6bbb93024316968198bd76ce

* FIX: 3770 printable checkbox incorrect display in darkUI

Jira: 3770

Change-Id: I97f67d7a0ffc41f6ee625abeecc52ee4e73cf318

* FIX:Display garbled code in AmsMaterialsSetting pop-up

Change-Id: I50531e939afa7715ae376bac47172ccf7b248114

* ENH:Modifying the Line Color of Transparent Materials

JIRA: STUDIO-4311,5088,4983
Change-Id: I9e63413dc9cd7d523f0f7f1a2e32c4537a84467a

* FIX: crash when async delete printer file

Change-Id: I92c5e812d04da263338fb0eea2fd7583cf9ecde0
Jira: STUDIO-5222

* FIX: 3733 backup time not effective

Jira: 3733

Change-Id: I50c2ce156fcbd0a17aa8a6777bce04aa6093c830
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: enable edit and delete preset btn and fix issue

Jira: XXXX

Change-Id: I724d7236b28fcc4746698f094531948a8fbb5d93
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX:send print job,file name displays error

JIRA:3137
Change-Id: I1c113025d274a13fba1b845a58aada14058fadd4

* FIX: skip hold user preset from sync

Change-Id: I2252246e19bd80903ad82170782ea49535d30d05
Jira: STUDIO-5185

* FIX: 5115 translations

Jira: 5115

Change-Id: I21b03bdd4d28c0bb097226143177e763cf8c777f
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: add link for ironing parameter

Change-Id: I451f5549db3ac2205aa5703a2e5edc831e946af8

* FIX: scale problem in lift type decide

1. Scale the travel threshhold

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib594d640fe63b0919bc9318af88577513f7dbf30

* ENH: add small perimeter speed and threshold

The original param is added by Prusa. Thanks orca for adding threshold.

1. Re add small perimeter speed and threhold.

github: #2221

Change-Id: I35b269b26f085d80f0edca28650bb21fc04898d7

* FIX: modify the picture of pa manual cali

Jira: STUDIO-5102
Change-Id: Id87898959ad4461b7bd2505b159271f2aa589c36

* FIX: Filament preset is the same with the first one

Jira: STUDIO-4519

Filament preset is the same wit the first one, it should align with the
last one.

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I304d0ff0fbc1c8948d410ea552e4d42b6a4e8fd9

* FIX: scoreDailog dark mode issue

Jira: 4570

Change-Id: I8be97b306a1494f73e3bba678ecc864e7ff88ca3

* FIX: CLI: fix the slicing issue while only one object with multicolor using seq-print

JIRA: no-jira
Change-Id: Iea2d23ff8e484bf2fd58aa2f596a8e4e4292fe39

* ENH: open support wall count for normal support

1. open support wall count for normal support
  Enabling this option makes normal support stronger and gives
  better overhang quality, but also more difficult to removal.
  Jira: STUDIO-5192
2. fix a bug where tree support (hybrid style) may get overlapped
  extrusions near the walls.
3. fix a bug where raft layers can't be 1 in tree support
  Jira: STUDIO-5261

Change-Id: Iadc0c67a9b50b5b221c8e83d5aa22ed282018cf8
(cherry picked from commit c0bb0084e386cb70ed6e16edf93190e4b38f5b90)

* FIX: compiling error on linux

jira: none
Change-Id: I1a4563503b5ddf74a1979cc0cee7a15b8aced904
(cherry picked from commit de52c6ca62c9f3a6314ddf5a856c1d8534329886)

* ENH: add translation for small perimeter

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I95013649e4e0c07c0f04b89a91488814c8d228cc

* FIX: clone shortcut key issue on macos

jira: STUDIO-5166

Change-Id: I1967da1d443ed43bd750dad8e11560688d7bd533

* FIX: custom gcode window cannot paste/ navigate

jira: STUDIO-5208、STUDIO-5070

Change-Id: I4ecb9d06cf5db0ae53a4678181aae9298bac106b

* ENH: modify dailytips collapse & expand interaction

jira: STUDIO-5209、STUDIO-5210

Change-Id: Ifb0b998e5004d4b49390ba5a250eaf4743bf3471

* ENH:Add shortcut keys and lists for objects search

JIRA: STUDIO-5157 STUDIO-5158 STUDIO-5240

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Ic7cfaaa9b4bb8a85208bafab7fe3bafdb78f0045

* FIX:Re-calculate button with White Box displayed in dark mode

JIRA: STUDIO-5098

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: I07cc6c72d5dbd03b72573cd27dd5938bb0e6a29a

* NEW: display plate index when printing a task

JIRA: STUDIO-2689

display on the thumbnail of the current task

Change-Id: I5f1f46c56e9d1e9120a66d491551908dfad099d6
Signed-off-by: Stone Li <stone.li@bambulab.com>

* ENH:fixed incorrect path prefix

jira:[for file path prefix]

Change-Id: Ie9e3999f02b78272e528ceceb479e746d46a7e6c

* FIX: thumbnail is not clear in dark mode

JIRA: STUDIO-5087

Change-Id: Ie86493ed71b5554095927f061509a1f551758b61
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>

* FIX: translation

Jira: XXXX

Change-Id: Id03f0d704aa852632a907ea628d1277400112062
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH: first nozzle change to 0.4 and nozzle change to mm

Jira: XXXX

Change-Id: I14defd36442dbd7008e46782b08415b6244224f1
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* ENH:editing_window_width's value is small on the laptop

Jira: STUDIO-5238 STUDIO-5265
apply_selected_connectors should check_and_update_connectors_state

Change-Id: I8c2c1c920cc4d197d1908815a3e62f4962335451

* FIX: fix new_bed_shape's calculation process

Jira: STUDIO-5122
Change-Id: I5f3e6a301a297123af28692c90bef6759f425b06

* ENH:update some translations

jira:[STUDIO-5262]

Change-Id: Idb1d3586888043ac325f272bc7a2b788adb3e9e5

* FIX: edit text command resets object settings

Jira: STUDIO-4655

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Iac25c4e40f1d0d32e6d1f40e62226cc22bc96042

* ci: update build version to 01.08.00.58

Change-Id: Iacfec02aa50c617e4c9fe566319b07b30d47dce1

* FIX: remove GetUserAgent

Change-Id: I92886e1f0dcb091109231a10da8c19d51178e13b
Jira: STUDIO-5205

* FIX: nozzle_diameter_map data structure adjustment

Change-Id: Ifb724afc0fcf974e6d331e73ecac723107a102cf

* ENH:add _A and _B for perform_with_groove

Jira: STUDIO-5267
Change-Id: Iee3310dfa1cd8e6680310f0af0eff5c817490813

* ENH:is_equal for min_z and max_z

Jira: STUDIO-5267
Change-Id: I9493883d8be9d44e26ddc9afe62b7e9eb09c5052

* ci: update build version to 01.08.00.59

Change-Id: Ie8ed29ccf5d6c94594eb2ab8b717416fbeace3bd

* FIX:Image display unclear in light mode

JIRA:5161
Change-Id: I134cc64a2af0dfff60c47d0ff09d78d9c0f86b3f

* FIX:fix bugs of non manifold edge

Jira: STUDIO-5267

Change-Id: I8ac9a2cf96da0bc07ee00b309e65611b92fd174d

* ENH:nozzle type detection

jira:[STUDIO-5246]

Change-Id: Ic41a2161a0e41d23f56af93ad8ec34cc83ada0e3

* ENH: upadte P1S start gcode

1.turn on MC board fan by default on P1S

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5b2f7868e350942fb8b7baf7d429e22a0987184a
(cherry picked from commit e866a575b6b7d9552f7412f84272f4b48dfc3961)

* ENH: improve support style's tooltip

jira: none
Change-Id: I8ee858d7052f04ce7ea6b226a500c7d1bf8a482f
(cherry picked from commit 665f31c4fcde22bd894cbb4a5fb160635947f2a4)

* ENH: set layer range error to warning

1. If layer range exceeds maximum/minimum layer range in printer
settings,pop up a window to warn

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0304ee790e557ecf967f355c171993d1f51b5057

* ENH: CLI: remove the warning of layer height

JIRA: no jira
Change-Id: Idaceee4f52611479fc3f4238d016d891b4dc8cd1

* FIX: the word search is not translated

Jira: STUDIO-5224

The world search in the device panel is not translated.

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ia3d651c2159a3aad94e10cd0a6da98848f53ee2a
(cherry picked from commit 4a46a0a4750d82d49c9523f4b668a1a00c41ed83)

* FIX: Bitmap will flash when sending printing task

Jira: STUDIO-5278

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ib0c8710b8d5d6b98fad043c950f054aa35bea965

* ENH:display the euler angle of rotation plane

Jira: STUDIO-5268
Change-Id: I6b7b431931d60f1a9a832908400417781798c472

* ci: update build version to 01.08.00.60

Change-Id: I1c15b5c6437554c43327cd6b537f7a5860dba5a0

* ENH:cancel EnterReturnsTrue for imgui in cut

Jira: STUDIO-5269
Change-Id: I2832e1dccaf9755448debe7b2bd56426f90dfe0d

* ci: update build version to 01.08.00.61

Change-Id: Ib03e664a20990322c788686550c491d0139d8237

* FIX: some translation problems

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If9f2af53b4f0bfa9469e84bcba68cc182df4a473

* add: Ukrainian lang support for 1.8

* FIX: calibration selected preset is null in some case

jira: STUDIO-5258

Change-Id: Iee63593c5f833c5a43e3b1d1c9ddb82f8c69569a

* FIX: create filament issue

Jira: 5296 5297 5295 5302 5311 5276

5296 create filament: list has same printer
5297 create filament: filament combobox has blank options
5298 edit filament: delete last preset prompt users
5302 create filament: filament combox has cili preset
5311 create filament: printer name too long to can not show all
5276 edit filament: PLA Aero filament type filter issue
add prusa vendor
Revised copy

Change-Id: I5dcc615ce0951b1a9953fa12283f6090f5069045

* FIX: some translation

Change-Id: Icb8614a0af18f96d15f3b97c17e0f6f708296847

* FIX:cancel is_equal for slicing function

Jira: STUDIO-5267
Change-Id: I66d759aa2c968f8a28a6a5d8378929754f2db689

* FIX:UI stuck due to pop-up window with wrong chamber temperature

JIRA: 5304
Change-Id: I1a49a7219b7a6f5700243704c348724e7930ce1a

* FIX: allow input '+' and hide edit preset btn

Change-Id: I97aec7c3ac4cc8b9d6c535f0126aaa1926553d86

* ENH: handle printer direct close and not retry

Change-Id: I5dd55f8085cf6383a8420ab41e614ea6ae210c78
Jira: STUDIO-5305

* ci: update build version to 01.08.00.62

Change-Id: I09716bf79354b503197c751272fd3171e0abc8fd

* add: new translation to ukr for AirFlow and Prusa

* add: Texture Plate name fix

* FIX:add slice_facet_for_cut_mesh api for cut tool

and modify section_vertices_map 's traverse
Jira: STUDIO-5267
Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056

Change-Id: I52bfaef8926ef967b78a6cb712a1731a1b528a24

* FIX: Make the front smaller for Czech in device panel

Jira: STUDIO-5151

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I315174b55f923da069854fb4fed8cf3937b82074

* FIX: there is no object can be jumped to in notification

jira: new

Change-Id: Ib81bf49236952ede24a2de126051572d63916e01

* FIX: add height range, modifier in Preview pane will crash

jira: STUDIO-5340

1. fix crash at add height range, modifiers in Preview from objectList
2. fix an assert hit when slicing
3. fix an assert hit when enter AssembleView
4. forbidden popup menu by right-click objectList in Preview

Change-Id: I444bc76b1a4307999b387e4f60386b2d272bd308

* FIX: Black spot in the sending printing task page

Jira: STUDIO-5307

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I3bd97c063ec5f0faf7d12047da39f60ce55cae4b

* FIX: reset_cut_by_contours should update_buffer_data

Jira: STUDIO-5376
Change-Id: I5aacb1f7b65822031d7138abd61a45b09c743531

* ENH:editing_window_width's value is small on the laptop

Jira: STUDIO-5238 STUDIO-5265
Change-Id: Ia958772bcb081817da621115f99328bb62770cd5

* ENH: bumped version to 1.8.1

Change-Id: I9d25403daa5b7b8ca415c0b364670da9e0f932b0

* FIX: create filament dialog: create btn can not show all

Jira: 5310 5331

Change-Id: I185272c90d9ff1c3d6b47abbefbf488d0d965cca

* FIX:update custom_texture when new_shape=false

Jira: STUDIO-5287
Change-Id: I3add95f9f9345c14a48cc7467513d1b3ce95f4c9

* ENH:editing_window_width's value is small on the laptop

Jira: STUDIO-5238
Change-Id: I9044129f4e0c8ca7469db05b3e547fca4754342a

* FIX:add slash_to_back_slash for saving file path

Jira: STUDIO-5287
Change-Id: I9f3c176cd0831c793958f08601c63efac98176a4

* FIX: a button color didn't response to dark mode change

jira: STUDIO-5315

Change-Id: I95489f01ccd1f77b9e95b0d0f69e5398d2e88487

* FIX: height range layers displayed in wrong position

jira: STUDIO-5341

Change-Id: I83918b4624f367efa54321f1898e1176cdb04ea9

* FIX: auto arranging issues with locked plates

1. global auto arranging may put items overlap with wipe tower if some plates are locked
jira: STUDIO-5329
2. items outside bed may overlap with plate boundary if it's rotated
jira: STUDIO-5329
3. plate-wise auto arranging uses wrong min_obj_distance if the
plate is by-layer printing but global setting is by-object printing
jira: STUDIO-5330

Change-Id: I5dba2f1317e183c9aeec1cb2bd227fbddf4316e6
(cherry picked from commit db1eac41efff5f1e8d5ac0af74c6fc7ab59fc253)

* FIX:  a mistake in upward machine

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibdb26c3d904634f322aef0dc0c7b8867d9fb5854

* FIX:a blank pop-up appears

JIRA:XXXX
Change-Id: Ice92b55204e4897fec024a6d99412eb810bddd4a

* FIX:fixed failure in updating nozzle type

jira:[STUDIO-5248]

Change-Id: Iad37b5d5b76d37cb1723ef21d7c39b1e3fcaf8d7

* FIX:fixed issue with AI monitoring settings

jira:[STUDIO-5082]

Change-Id: I967fe3c1e9da61a55bcbfaa2a8e067dd5af18f72

* FIX:fixed issue with lan mode

jira:[STUDIO-5189]

Change-Id: I1d0a05f19dcea154cf3ef2b61ed0546d3581905e

* FIX:update text for loading or unloading filaments

jira:[STUDIO-5231]

Change-Id: Ic7729c3ec012485b3d87e3d01f11e87502c67895

* FIX: Revert "ENH: do not leave a gap for top...

Revert "ENH: do not leave a gap for top interface if the top z distance is 0"

This reverts commit 79ea32c7cbbdb7e689637980af7c36caf42284c9.

Revert reason: the supports are impossible to remove in some cases.
jira: STUDIO-5385

Change-Id: I376a6f4dfd78da6dfea68b9ac3d552cddd0b4272
(cherry picked from commit 34e38b705fde7f5d7f9a3a89c96a3627ce0c998e)

* ENH: improve normal support's quality

1. Add a base_interface_layer when using Supp.W
2. Fix a bug where base_angle and interface_angle are wong

jira: STUDIO-5386
Change-Id: I52ab32c63b3cd1e6e2ba6463b01ae26699cf13d3
(cherry picked from commit 92ddd4a10b793572a1fa009da5b9e44fcdf81de2)

* NEW:tracking stl model files

jira:[STUDIO-5372]

Change-Id: Idb1275b07441f0cd06c24588d5f7c20f81f1556c

* FIX: edit filament dialog: preset name too long to del btn nan't show

Jira: 5336 5174
and verify string normalization

Change-Id: I380c3bed2bf43d01094b68979a8b67f4187c0b93

* FIX: some translation

Jira: 5232 5300 5334

Change-Id: Ie474ca823011e81aab82a9809af3d6e42980496b

* FIX: some translation

Change-Id: Iaabe6087bed3b7d47d911cf4fb51c770804e72fb

* ENH: change default tree_support_wall_count to 0

Now normal support also uses this option, so we can't default it to 1, otherwise normal supports will be too hard to remove.

jira: none
Change-Id: Ic5700af5c17e3a7b265c8915f28b0db35c6e06e6
(cherry picked from commit 6b84a9826da108b76569e686bd9def0b23ae29fd)

* FIX:The name of the material in the error prompt is empty

JIRA:STUDIO-4907
Change-Id: I3cf44f099256a51f21a44a89c89c000f734d1f36

* ci: update build version to 01.08.01.51

Change-Id: Ib20f5a12b65472102befec0a2adf82744fc29c46

* FIX: imgui textinput cannot paste on macos

jira: STUDIO-5070、STUDIO-5365

Change-Id: Iea8f41e12744ecda0fbb95c1a8f2e014a7cdc384

* FIX: not cache printer file list on error

Change-Id: I99843aedbf14d3d1d553ccac9b0bd26403274a82
Jira: none

* FIX: thread of close BBLUserPresetExceedLimit notify

Change-Id: I9698134ba1cc91fc83eac441f900d68c4c4b556a

* ENH: Resolve non manifold edges by fixing model interfaces

Jira: STUDIO-5124
Change-Id: I7ea86be44acb80b6c4762a76208b4a031acd0b27

* FIX:nozzle type sync

jira:[STUDIO-5248]

Change-Id: I63d48628832473d8d371ed643dc8528b00382531

* FIX: array bound happen in TriangleSelector::deserialize

Jira: STUDIO-5170
Change-Id: I92b72a887845b462fad208f13607293b44d3d333

* FIX:cropping rendering without considering assembly views

Jira: STUDIO-5260
Change-Id: Ia56cf80b305ae05f25f06ec277f85b3c5430a6df

* FIX: PA for custom filament not available in BL Studio

github: 2971
Change-Id: I6ccd36a183e7367d69557300f7242f5403f4bb33

* FIX: Bitmap is way too small on Mac

Jira: STUDIO-5393

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I6b550669fa8cd5fc9bfa6ed96d64d19a949f01b2

* FIX: move shutdown wait to OnExit

Change-Id: I70d9a2bb686525ae5273aa9d63e25691da4ab65c
Jira: STUDIO-2884

* FIX: calibration manage result dialog issue on macos

jira: STUDIO-4949 STUDIO-5378

Change-Id: I00abefd45a0d274a4b68bb1ab18debe8f91d169e

* FIX: adjust bed shape dialog button UI style

fix that button text is hard to see in dark mode
jira: STUDIO-5247

Change-Id: I2cf5b3cdd2eff9b821bdf5525bec4f329fc58dd1

* FIX: 5331 rescale btn

Jira: STUDIO-5331

Change-Id: If153424b8480e64b166018e3cd98c17db557d0a8
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>

* FIX: support do not generate

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ide9709d95203185538e280517f7aa6136beeda44

* FIX: remove not match printer config ota cache

Change-Id: Ib73fc2ea31fa2186061cfcb5a170bc59b9db84ca
Jira: none

* FIX:cancel the variable of "checkbox_size"  as a fixed value

Jira: STUDIO-5150
Change-Id: I30d876d141b8b35ab4a3fee4889993d87b7c1741

* ENH:add reset_cut_by_contours in on_load function

Jira:STUDIO-5269
m_connector_size_tolerance default value is 0.1f

Change-Id: I6c67fff3cb0c1190e9141ed6f68fbfa848679f35

* ENH:cancel EnterReturnsTrue for imgui in cut

Jira: STUDIO-5269
Change-Id: Ifc4b183a4e4c4fdb4f47742f14f70a1ed93fa056
Signed-off-by: zhou.xu <zhou.xu@bambulab.com>

* FIX: dailytips should not change content frequently when slicing all

jira: STUDIO-5234

Change-Id: Icb7e9c28404d9db8ebed58d937e13f89c5403b5c

* FIX: objectList clone shortcut key issue

jira: new

Change-Id: Ia75bf58a7d53f962e1af6c2fd97497270b7eea84

* ENH:handling cases without msgs

jira:[STUDIO-5401 STUDIO-5399]

Change-Id: Iae651d5a19a45b0138a6aa621326a8b4a9649824

* ENH: optimize param description

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id0ca9224227a716b21fc0b8430722264dc319344

* ENH: add translation

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3b1f04fee3cd6322793794ad8b8707859f6c7d26

* FIX: close edit preset paramsDialog, mac unresponsive

Jira: 5298

Change-Id: I021e00567354cfb1f2f5f1f2bf6ba1fc35b164c5

* ENH:disable AI monitoring on the p1p series

Change-Id: I514bb1fb1ced6c03dd619230a9adac3be63f2de2

* ci: update build version to 01.08.01.52

Change-Id: I9f5e30d3fc4b7ef9321c522d3c18fce98f03742f

* FIX: close edit preset paramsDialog, mac unresponsive

Change-Id: Ic816754a20b7f6a5cdb46475750eb301fec3ad3a

* FIX: organic support not work with raft only

There is no raft generated when only raft enabled but no support needed.
jira: none

Change-Id: Ic0c9269e2f98038d85c9bc54e4a85f892dc5d764

* FIX: CLI: add object config when assemble

JIRA: no jira
Change-Id: I945f820fb58f2f643170b4b0b66742f6bbbdfd29

* FIX: delete preset prompt

Jira: XXXX

Change-Id: I6511c806c56393d4f6bd72d1c506da59675d49ff

* FIX:Reorganize the assignment of variables of "m_editing_window_width"

Jira: STUDIO-5238
Change-Id: If369916f3f5c21510f5f297bfd05c1230bdda7a4

* ENH: CLI: re-compute flush_volumes_matrix when it is missed

Change-Id: Ie8f53c6bef003b1434de02ea14de5787b376484f

* FIX: some translation for delete filament

Change-Id: Ib46a8eba33f2e21016476aaab4a57a740e86b1b8

* FIX: scrolled window / del preset / edit filament issue

Jira: 5092
GitHub: 1936
edit filament: just one preset, the scroll bar obscures the preset name
edit filament: delete selected preset, click no, but preset be deleted
from UI
edit filament: serial sometimes displays incorrectly

Change-Id: Ibc91609e252179de0c05ca065099756da6631165

* ci: update build version to 01.08.01.53

Change-Id: I5563a2c0812ab9a0d7727df27e17e681066ffa08

* FIX: mistake in filament vendor

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I3af712e417379d8b98ae18feebffe465bfa1e72d

* NEW:set customized materials for the A1 P1 series

Change-Id: I9c34f62867c074bf9ebb315013e5e40526e0eac7

* ci: update build version to 01.08.01.54

Change-Id: I579dcee428417ae7e7f7a96bd315a7066d72d974

* FIX: the flow rate ratio crashes after load model

for third party printer
Jira: 5244

Change-Id: Idd829c9d99eeba9d180653ac8de4e51b9a0d6370

* FIX: The maximum value is not printed in PA line mode

Jira: 5046  4951
Change-Id: Ic81f9a75ce7f088fe950fdde283ff5c942cd6e83

* ENH:add preset check for sending files

Change-Id: Ia3313d281b5ce91e277b380498014ffdac5debd3

* ci: update build version to 01.08.01.55

Change-Id: Ia839344d01a43f7159f376d4147337575c4edbe1

* FIX: locale loading user preset

Change-Id: I88521e4b10cb802d9253eb79a6b78b3286f15a33
Jira: STUDIO-5436

* FIX: sync user preset notify crash on exit

Change-Id: I88f5dbcbd487293ea847ea6092efb61744399541
Jira: STUDIO-5413

* ci: update build version to 01.08.01.56

Change-Id: Id7a9718d5f920da50d52fd2ef220acf5d3270d3c

* GUI/Field: Fix crash in color picker init (#2220)

wxButton->GetBitmap() may return an invalid wxBitmap.
Guard against this.

* FIX: custom filament preset display in cali history issue

jira: new

Change-Id: I4145450a231adff542ab1a7428b3479f4074e06a

* FIX: meshboolean transform result issue

jira: STUDIO-5425

Change-Id: If66fe909ce4458c1b3192e4fd8a3d758fe7c7eaa

* FIX: fix combobox and delete btn in filament setting enabled

Jira: XXXX

Change-Id: I8b659bd77ceb97c8cea9d3e5e931f4ea50822721

* ci: update build version to 01.08.01.57

Change-Id: I7a6f5439863ca81275ae8b80f1b5cf0bb36c4c0f

* unix: Use canonical mime-type for 3MF files

model/3mf is the canonical mime-type, but keep the
application/vnd.ms-3mfdocument alias.

See for details:
https://gitlab.freedesktop.org/xdg/shared-mime-info/-/merge_requests/179

* FIX: fix the compiling issue under windows

github: https://github.com/bambulab/BambuStudio/issues/3028
Change-Id: Iafde9d2086c0cd31aa12e39cef7ded1e19e9d3e7

* add: K1 and K1Max Support

* fix: Optimized STL and PNG for plates K1 & K1Max

* fix: simple version of models

* FIX: Close scan_first_layer when PA line cali

Jira: XXXX
Change-Id: Ide5c0038f4028b8f1d445a6b2d09b705d7872fb8

* FIX: CLI: fix the wipe tower disappear issue

JIRA: no jira
Change-Id: I547a8468b0bea06912d5d9ceee1c8deead85e28f

* FIX: the preset is the same with the first one when switching printers

Jira: STUDIO-5433

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Icf1979f2bcffbc9c59a072924df5073fc3eac363

* FIX: [5504] Optimization description

Jira: 5540

Change-Id: I9379f2c69b6724ec1ef5294dd3c404b0e3189486

* FIX: [5451]Directly crash when memory is low

Jira: 5451

Change-Id: I5c75994e2bd556bec7ce8de6be44888e6924ff56

* ci: update build version to 01.08.01.58

Change-Id: I12b1e3ca6b07ed13f3ad42ab2f40b825cb84a8dc

* ENH: CLI: refine some logic

1. set wipe tower position to default when duplicate object
2. add cli_safe check logic when switch printers

JIRA: no jira
Change-Id: Iebe62f8be6acd6f44743abf3b0fe92ec04c94197

* ENH: CLI: allow height shrink when printer switch

to let the error generated at validate
JIRA: no jira

Change-Id: I94db90db858659a9254dfdc0a6eed04fd40d3768

* ENH: add support for A1

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I5dfd8f3b6b872c01d8093527df1a3c37b8a0d56d

* ENH: refine description of interface not for base

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ibe11e845b90ef2caf96d5780eaaf8764755cce1d

* ENH: version: bumped to 1.8.2

Change-Id: Ic9acb5607ec94188112999afa41f2052281a08f1

* ENH: update some machine settings

1. Update A1 mini start  gcode
2. Update A1 load/unload filament time

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I84825a47f2741e95ca122382e4119d35a61bdbf6

* ENH: support for head wrap detect

1.Add "in_head_wrap_detect_zone".Detect if the model projection enters
a specified area.

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I6aed5a782d2f33f023bdc19cf06dff0957828eeb

* ENH: modify default head detect zone

1. Set default head detect to empty

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I686c4c3115041471bc016cf3b0972ed730af64d3

* ENH: change head wrap detect zone

Change to (156,156)-(180,180)

jira:[new]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I7b9dec3fbf44d31311fd7eb331e52f307f45ede1

* FIX:backup iterator location

Jira: STUDIO-5267
Change-Id: Id035c9225a858bb551aa4f09870fc4c6bb30b255

* NEW:compatible with p1p (plus)

jira:[p1p]

Change-Id: I7b30903dc0a728604c4f33c325aa79fd3bd08f68

* NEW:installed & supported p1p(plus)

jira:[pip plus]

Change-Id: I0a69f8629749e3076465b85f28aa39d5e7ae6277

* ENH: modify default head wrap detect zone

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I39ccc810a19192919a21b5608d3fa2a806c787ee

* FIX: excpetion when plate center is negative

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia1066bd7457181711d0a59b9544d65ed502410e0

* FIX: big window's scaling causes incomplete display

Jira: STUDIO-5530
Change-Id: I1d69e60658e49e43d4b3de718f2fd6739bab73ce

* ENH: update: remove the comment which is not used when updating preset

JIRA: no jira
Change-Id: Ic930eea50a7beb78aa6dc7c53fbb5c366857e825
(cherry picked from commit e0225fc147702cf73e6eda4830a2592c7598901c)

* FIX: wrong initial layer height in profile

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I91f1779761a13f70d68ad51041b7f75ef872c138

* NEW:add N2S picture and printers

JIRA: XXXX
Change-Id: Id8eddd9fafd07c967abfb1543c1b01ad8c0e1b0c

* ENH: rearrange machine pos on printer selection page

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Iccc52043c232d19384487884e4071343744976a9

* ci: update build version to 01.08.02.51

Change-Id: I1985730c4ea29528a6f9b03f56c73131a07779b0

* ENH: some translations

Jira: STUDIO-5434

Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: Ie6868728edfc40bd1d20dec6a78d8e5ea7f8edf8

* ENH: do not cancel printing job when timeout

JIRA: STUDIO-5009

Change-Id: I067470173acc26d7ecd8ceb6f0e04ac7f03e3a4d
Signed-off-by: Stone Li <stone.li@bambulab.com>
(cherry picked from commit 7ab5817c7229c5179adca026ffacb97c2affd292)

* ENH: udpate A1 series gcode

1. Update A1 mini change layer gcode
2. Update A1 start gcode

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I131676a991f4727bca1ea2fa727f40f293d06139

* ENH:After cutting,fix non manifold edges needed confirmed by user

Jira: STUDIO-5217
Change-Id: I52ba0db27ebe0b7b763c49311c7aa305bc4dcd5a

* ENH: linux: refine the d-bus name

github: #3075
Change-Id: Icf997f4f9203f4d429e3b6058d6d6e5f23bf29ac
(cherry picked from commit 5c766bff445cefee488ba9d057121b04c8e1445d)

* NEW:add "bed type to follow machine preset" function

Jira: STUDIO-5535
Change-Id: I2ef99a0a783a074d9379685adde11fddfd6f8cec

* NEW:add "default_bed_type"

Jira: STUDIO-5535
Change-Id: Ice1262937923b62854b0196229d5fb99392470af

* ENH:comment out two line code

Jira: STUDIO-5535
Change-Id: I5475e4f9ec6fb7e4abdb3d950da34fadead3b606

* ENH:translate three texts

Jira: STUDIO-5535
Change-Id: I00938567f0ae30bb354042769021451364bef308

* FIX: incorrect flag in A1 mini gcode

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If587678bf0aa06c079a9d3cbff9f2c7628c5e380

* ci: update build version to 01.08.02.52

Change-Id: I2d8310b7321fefcb742d4cdbe5e4bc9a035ec45a

* FIX: Allow vendors that are not entirely numerical

github: #3082

Change-Id: I318f4df7f65c934ab6703e0970d775b754b24276

* ENH: update A1 series first layer speed

jira:[NEW]

Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I597bcf86f202f681eccfda4306be5619d669ea5a

* FIX: CLI: fix the wipe tower issue while mapping to one filament

JIRA: STUDIO-5550
Change-Id: I0b8d3af09d16bdfc45cdc5951d182f7e33dc9b93

* FIX: crash when support type and style are inconsistent

jira: STUDIO-5428
Change-Id: Ib1e79c71736810099e15282c30524e55e8f60f34
(cherry picked from commit aefb7fbaf25146c03bd2eb336f58ed2eb0e83ea6)

* NEW:display beta version

JIRA: XXXX
Change-Id: I78d748e53b266c3397b1c038c3425a52c573cc88

* FIX: slice error: WipeTowerIntegration::append_tcr

when print by object with multi-color
Jira: XXXX

Change-Id: Ic9ee2f6de45abb4a118fdb4cf89dea9ca7335094

* ci: update build version to 01.08.02.53

Change-Id: I980bff783b59fc6e9d6fd12a016c2daa2840991f

* FIX: remove duplicated profiles

jira:[NEW]

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: Iaa87233ae6c327faf43a152bdb0cd6fa8c5131d7

* FIX: translation: vendor can not be number

Jira: XXXX

Change-Id: I7bd45de944e8b25b30c88ab742b35d996c933966

* ci: update build version to 01.08.02.54

Change-Id: Ib83b131c533a03d6e48e9ded5e6f9ba574819756

* ENH: update A1 extruder clearance radius

jira:[NEW]

Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Change-Id: I13cfb882c672083dcd1af2c1be448c5422fdbc0a

* ci: update build version to 01.08.02.55

Change-Id: I8d7016d27166b457e4cdc198b61e6aa36a72b8c1

* FIX: bed_type not follow machine preset

Jira: STUDIO-5578
when direct open project from https://makerworld.com/

Change-Id: I3281cf45e3057d766008487975b4585d2e277110

* ci: update build version to 01.08.02.56

Change-Id: I43cadeeb1a2fa150fa9396a63b9bc471da1500d5

* update strings

* autofix mesh after cut

---------

Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Signed-off-by: maosheng.wei <maosheng.wei@bambulab.com>
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Signed-off-by: Stone Li <stone.li@bambulab.com>
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Signed-off-by: zhou.xu <zhou.xu@bambulab.com>
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Signed-off-by: XunZhangBambu <xun.zhang@bambulab.com>
Co-authored-by: chunmao.guo <chunmao.guo@bambulab.com>
Co-authored-by: zorro.zhang <zorro.zhang@bambulab.com>
Co-authored-by: hu.wang <hu.wang@bambulab.com>
Co-authored-by: liz.li <liz.li@bambulab.com>
Co-authored-by: Kunlong Ma <kunlong.ma@bambulab.com>
Co-authored-by: maosheng.wei <maosheng.wei@bambulab.com>
Co-authored-by: gerrit <gerrit@bambulab.com>
Co-authored-by: tao wang <tao.wang@bambulab.com>
Co-authored-by: zhou.xu <zhou.xu@bambulab.com>
Co-authored-by: xun.zhang <xun.zhang@bambulab.com>
Co-authored-by: the Raz <rasmus@abc.se>
Co-authored-by: Andy <andylg@yandex.ru>
Co-authored-by: lane.wei <lane.wei@bambulab.com>
Co-authored-by: Arthur <arthur.tang@bambulab.com>
Co-authored-by: Stone Li <stone.li@bambulab.com>
Co-authored-by: enricoturri1966 <enricoturri@seznam.cz>
Co-authored-by: wenjie.guo <wenjie.guo@bambulab.com>
Co-authored-by: zhimin.zeng <zhimin.zeng@bambulab.com>
Co-authored-by: Dmytro Chystiakov <dlchistyakov@gmail.com>
Co-authored-by: mia <652892+mia-0@users.noreply.github.com>
Co-authored-by: Bastien Nocera <hadess@hadess.net>
Co-authored-by: qing.zhang <qing.zhang@bambulab.com>

* Revert "update user agent" for now as it cause trouble to login

This reverts commit ae8995fec224e026b3f9ec43269bddcad19e32d0.

(cherry picked from commit cd35171fd18d47839faa3ea119f3cbfc356c0a65)

* Write correct slicer version

* mega fix 1.82

* kor translation update (#3199)

* ital lang fix

* Another sidebar improvement PR (#3194)

* Show sidebar when opening normal 3mf file

* Retain sidebar size when switching between tabs

* Fix custom filament tab missing bug
Fixed #3135

* Write correct slicer version

* fix

* fix

* fix wx

* fix about

* fix wx

* Add more built-in models: Disc/Torus/Bunny

* fix models

* Rename bunny to `Stanford Bunny`

* Do not limit the max window size (#3149)

Do not limit the max window size (#2889)

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Fix crash on MacOS when clicking filament dropdown in object list (#3205)

* Disable optimization for `RelWithDebInfo` for Clang as well

* Fix crash on MacOS (#3134, #3202)

* Fix wx issues from upgrade (#3032)

* fix top bar resizing

* Attempt to fix bitmap bundle scaling issues

* Revert "Attempt to fix bitmap bundle scaling issues"

This reverts commit e94ba58d907b1b2da5a9e27ad552e1d7f1288c18.

* Fix AboutDialog and partially fix SwitchButton

* Fix switch button scaling on windows

* Fix dropdown icon size

* fixed sdcard/recording/timelapse icon size in device page

* Set use_legacy_bmp to true by default to it's back compatible

---------

Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>

* Update Spanish translation (#3212)

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Revert "Merge remote-tracking branch 'upstream/main' into spanish_translation"

This reverts commit 694a900845c56ea364cf21aa2a0f65a98bb68539, reversing
changes made to 4f53ce4f88a435d2d0305743f42329730406a48d.

* Revert "Update OrcaSlicer_es.po"

This reverts commit 4f53ce4f88a435d2d0305743f42329730406a48d.

* Revert "Revert "Update OrcaSlicer_es.po""

This reverts commit 53bd15617c81dabd6180875ced03826e9c08a972.

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Revert "Update OrcaSlicer_es.po"

This reverts commit b21aad079fd6fde7fbfa3dcfbe214d1054c569f1.

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_en.po

* Update OrcaSlicer_es.po

* Traduccion de OrcaSlicer al español

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* fix galaxy

* fix

* write Orca version into 3mf project file

* fix GalaxySlicer_VERSION

* ENH: PR: Alternate extra wall (#3196)

* ENH: PR: Alternate extra wall

* Updated tooltip

* Tooltip spelling correction

* Introduce dialog box to disable ensure vertical shell thickness

* Alternate Extra Wall - automatically disable for Vase mode and revert vase mode toggles

* Corrected invalid push

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* Bug Fix: Fix crash when printing by object after 1.8.2 code merge. Fixed tool ordering not done based on flush volume on BBL printers (#3223)

* PR: Fix crash when printing by object after 1.8.2 code merge

* PR: Revert change in tool ordering - reorder_extruders_for_minimum_flush_volume to enable tool sequencing based on projected flush volumes

* Bumping up reordering to up to 12 different colors on same layer.

* Updated tool ordering to distinguish between bbl printers when reordering tools

* Update to code comment

* Updated population handling of is_bbl_printer variable

* Bug fix: VFA Test fix (#3230)

VFA Test fix

* Update Spanish translation (#3231)

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Revert "Merge remote-tracking branch 'upstream/main' into spanish_translation"

This reverts commit 694a900845c56ea364cf21aa2a0f65a98bb68539, reversing
changes made to 4f53ce4f88a435d2d0305743f42329730406a48d.

* Revert "Update OrcaSlicer_es.po"

This reverts commit 4f53ce4f88a435d2d0305743f42329730406a48d.

* Revert "Revert "Update OrcaSlicer_es.po""

This reverts commit 53bd15617c81dabd6180875ced03826e9c08a972.

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Revert "Update OrcaSlicer_es.po"

This reverts commit b21aad079fd6fde7fbfa3dcfbe214d1054c569f1.

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_en.po

* Update OrcaSlicer_es.po

* Traduccion de OrcaSlicer al español

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

* Update OrcaSlicer_es.po

---------

Co-authored-by: SoftFever <softfeverever@gmail.com>

* fix

* fix models

* fix path

* Add a new option

* Revert to WxWidgets 3.1.5

* Revert to WxWidgets 3.1.5 (#3249)

* revert to WxWidgets 3.1.5

* update nanosvg unicode path

* fix

* Fixed asserts and calculations in calculateExtrusionAreaDeviationError.

The previous method worked just for near collinear edges. But it was also used for sharp corners, and for those sharp corners, there was an overflow in the computation of weighted width.
Also, the computation of deviation error was wrong for those sharp corners.

(cherry picked from commit 89b9f702d6cd59bc64c93687bc086f17a206cd0b)

* Fixed asserts and calculations

* patch image.cpp and window.mm

* update

* bump version to 1.9.0-alpha

* update locale

* fix

* wip

* Show used filament length and weight

* Don't hide exclude_object option for Marlin/RRF

* fix tr

* fix ko

* fix

* fix brew

* libjpeg-turbo to 3.0.1

* fix build

* Use local curl

* fix

* fix

* add back

* fix loc

* fix ko

* fix layer hight 0

* fiy lang turk

* fix spiral mode in vase mode

* upgrade osx 13

* down to 12

* workaround to solve unwanted zstd dependency on runner

* fix

* wipe inside

* fix datadir

* fix hints

* fix/update locale

* fix

* fix locale

* fix

* fix build

* make `exclude_object` off by default

* update locale

* fix Slic3r

* Update German translation for 1.9 (#3343)

* Updated Italian translation (#3347)

* update locale

* create datadir folder if not exist

* fix bbscfg

* Update OrcaSlicer_tr.po - TURKISH translation update (#3354)

Co-authored-by: SoftFever <softfeverever@gmail.com>

* fix

* fix build

* preset export small tweak

* remove P1P-P1S warning

* fix

* fix connection

* Fr translations (#3361)

* Updated French translations.

* Reword "strength"

* Updated translations

* Added missing translations.

* Fixed place on face translation

* Fixed strings.

* Updated locales

* Better translation for "Brim ears"…
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

No branches or pull requests

2 participants