RAdiomaster Nomad Wireless bridge

[staffan-w]

Just love the work and how good it is.
Tried to use a Radiomaster Nomad flashed with mlrs ofcourse and use the ESP32_C3 chip for wifi connectivity to the computer, just to be able to elevate the Nomad in a small mast.
I have some great difficulties to get the ESP32-C3 chip to do whats its supposed to to, transmit wifi.
Tries flash via espwebtool and via mlrs lua but cant get it to wrok.
What do I miss
Thanks!!

[olliw42]

@jlpoltrack
Nomand question, maybe you can help out?

my first impulse is "Tries flash via espwebtool and via mlrs lua but cant get it to wrok.", Neither there is a espwebtool nor a mlrs lua which would allow to flash the wireless bridge. Please use the mLRS Web Flasher app

[jlpoltrack]

@staffan-w

Can you confirm that you were able to flash the Wireless Bridge using the Web Flasher? https://olliw.eu/mlrs/flash/

If no, you will need to flash it first. If you were able to flash it, then you need to change Tx Ser Dest to 'wbridge' in order to activate the Wireless Bridge.

[staffan-w]

Sorry, no, I could Flash tx module no problem on the nomad but flashing the esp32-c3 chip the Flasher just ended up waiting. I guess the problem is I can't get to it and alter the settings according to the instructions in the webflashern. If I understand it right it should be a pass through but it seems not to work.

[staffan-w]

So can i change the settings rx ser dest in lua script on the radio after the tx module is flashed to mlrs, the go back to the webflsher and flash the esc32-c3 chip with wireless bridge?

[staffan-w]

Managed to flash the esp32-c3 chip by altering the params in the mlrs lua script in the radio before flashing with mlrs webflasher. Thanks for your help, just slow thinking from my part!