Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[22.03.0] 22.03.0 bricks Netgear EX6150v1 ramips MT7621 #10645

Closed
masterblaster79 opened this issue Sep 8, 2022 · 13 comments
Closed

[22.03.0] 22.03.0 bricks Netgear EX6150v1 ramips MT7621 #10645

masterblaster79 opened this issue Sep 8, 2022 · 13 comments
Labels
bug issue report with a confirmed bug release/22.03 pull request/issue targeted (also) for OpenWrt 22.03 release target/ramips pull request/issue for ramips target

Comments

@masterblaster79
Copy link

Hi folks.

I tried to install 22.03.0 on the Netgear EX6150v1 device and it fails to boot.
sysupgrade was used with the "-n" option to purge settings.

Upon reboot the device just sits there with orange LED being solid (every 30 seconds or so the LED flickers a few ms - I guess it's in a reboot loop).
Also it's not possible to enter failsafe.
The only way to recover is using nmrpflash with the 21.02.3 .chk file.

Unfortunately I do not have UART connected. I opened the device once, but I was unable to identify the correct solder pads and the wiki has no photos..

21.02.3 works flawlessly though.
@WatermelonRei
Copy link

WatermelonRei commented Sep 9, 2022 •
edited
Loading

Same problem on HiWiFi HC5962. Neither sysupgrade nor factory image can boot successfully.

@zorun zorun added target/ramips pull request/issue for ramips target bug issue report with a confirmed bug release/22.03 pull request/issue targeted (also) for OpenWrt 22.03 release labels Sep 9, 2022
@seriv
Copy link

seriv commented Sep 13, 2022

I have the same problem with Netgear WDNR4700, had to debrick by getting back to 21.02.3-apm821xx-nand-netgear_wrdr4700.

@kroeckx
Copy link
Contributor

kroeckx commented Oct 14, 2022

Any news about this? Does 22.03.1 fix this?

@DragonBluep
Copy link
Contributor

I believe it's LZMA ERROR: 064e7e5
Please try to add $(Device/uimage-lzma-loader) between line 1393 and 1394:

openwrt/target/linux/ramips/image/mt7621.mk

Lines 1393 to 1394 in cb24be4

$(Device/dsa-migration)
DEVICE_VENDOR := NETGEAR

@WatermelonRei
Copy link

Any news about this? Does 22.03.1 fix this?

nope

@masterblaster79
Copy link
Author

Will applying the changes to mt7621.mk be effective for images created with ImageBuilder or is compilation required?
I tried with ImageBuilder only and it didn't work.

@kroeckx
Copy link
Contributor

kroeckx commented Oct 17, 2022 via email

@masterblaster79
Copy link
Author

Adding $(Device/uimage-lzma-loader) fixes the issue.

@ynezz
Copy link
Member

ynezz commented Oct 18, 2022

Same problem on HiWiFi HC5962. Neither sysupgrade nor factory image can boot successfully.

@WatermelonRei are you able to test the above mentioned fix?

openwrt-bot pushed a commit that referenced this issue Oct 18, 2022
@ynezz
mt7621: netgear_ex6150: fix reboot loop by using LZMA loader
36a808b 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

Fixes: #10645
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 7dd1cab)
@WatermelonRei
Copy link

WatermelonRei commented Oct 18, 2022 •
edited
Loading

Same problem on HiWiFi HC5962. Neither sysupgrade nor factory image can boot successfully.

@WatermelonRei are you able to test the above mentioned fix?

HC5962 profile is loacted in line 881, so I should add another $(Device/uimage-lzma-loader) to it from what I understand. But I have to set up Openwrt Build System for image compilation, let's give it a try.

@WatermelonRei
Copy link

Yes, adding $(Device/uimage-lzma-loader) fixes HC5962 boot issue.

@WatermelonRei
Copy link

WatermelonRei commented Oct 18, 2022 •
edited
Loading

Same problem on HiWiFi HC5962. Neither sysupgrade nor factory image can boot successfully.

@WatermelonRei are you able to test the above mentioned fix?

Would you like to commit this fix for HC5962 again? I'm a novice at doing these procedure, thanks for your help!

openwrt-bot pushed a commit to lede-project/source that referenced this issue Oct 18, 2022
@ynezz
mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader
b63d6d4 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

References: openwrt/openwrt#10645 (comment)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
@ynezz
Copy link
Member

ynezz commented Oct 18, 2022 •
edited
Loading

Same problem on HiWiFi HC5962. Neither sysupgrade nor factory image can boot successfully.

@WatermelonRei are you able to test the above mentioned fix?

Would you like to commit this fix for HC5962 again? I'm a novice at doing these procedure, thanks for your help!

It's in b63d6d4 and cherry-picked in 1dd04e8426ce.

openwrt-bot pushed a commit that referenced this issue Oct 18, 2022
@ynezz
mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader
8fefd5c 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

References: #10645 (comment)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit b63d6d4)
Vladdrako pushed a commit to Vladdrako/openwrt that referenced this issue Oct 21, 2022
@ynezz @Vladdrako
mt7621: netgear_ex6150: fix reboot loop by using LZMA loader
b6d15a2 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

Fixes: openwrt#10645
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Vladdrako pushed a commit to Vladdrako/openwrt that referenced this issue Oct 21, 2022
@ynezz @Vladdrako
mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader
17c058b 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

References: openwrt#10645 (comment)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
@l-lossen l-lossen mentioned this issue Oct 21, 2022
Closed
Dedicatus5457 pushed a commit to shinka-router/openwrt that referenced this issue Oct 23, 2022
@ynezz @Dedicatus5457
mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader
e51a776 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

References: openwrt/openwrt#10645 (comment)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Dedicatus5457 <ryanhou24@gmail.com>
dumtux pushed a commit to dumtux/towerwrt that referenced this issue Nov 4, 2022
@ynezz @dumtux
mt7621: netgear_ex6150: fix reboot loop by using LZMA loader
e81cc03 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

Fixes: openwrt#10645
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 7dd1cab)
dumtux pushed a commit to dumtux/towerwrt that referenced this issue Nov 4, 2022
@ynezz @dumtux
mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader
fdcf7d4 
This fixes a well known "LZMA ERROR 1" error, reported previously on
numerous of similar devices.

References: openwrt#10645 (comment)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit b63d6d4)
@herbetom herbetom mentioned this issue Nov 4, 2022
Closed
@Djfe Djfe mentioned this issue Dec 16, 2022
Open
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
bug issue report with a confirmed bug release/22.03 pull request/issue targeted (also) for OpenWrt 22.03 release target/ramips pull request/issue for ramips target
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
7 participants
@ynezz @seriv @zorun @kroeckx @masterblaster79 @WatermelonRei @DragonBluep