s905l3a CM311-1a-YST: Cannot attach to PHY (error: -19) #812

kaliefgrieve00-gmail · 2022-12-14T04:38:44Z

盒子:
s905l3a CM311-1a-YST

使用镜像
Armbian_23.02.0_amlogic_s905l3a_bullseye_6.0.12_server_2022.12.12.img

rufus-3.21 写入u盘

使用开心电视助手从U盘启动

无法获得IP

提示
[925.088374]meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1
[925.094357]meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)

没有网络,不能ssh 进去发送文字版本的log 图片如下

解决过程:
#798 这个帖子的问题和我一样 , 他的机器型号和我的不一样.

我执行

cd /boot
cp -f u-boot-e900v22c.bin u-boot.ext
chmod +x u-boot.ext
sync && reboot

还是报错

2 针对我这个盒子,需要复制的是哪个.bin文件呢

The text was updated successfully, but these errors were encountered:

ruanimal · 2022-12-14T06:14:26Z

一样的问题，而且开始配置用户名密码的时候机器很卡

ophub · 2022-12-14T06:35:40Z

#517

刷这个安卓系统试试

ruanimal · 2022-12-14T06:40:30Z

#517

刷这个安卓系统试试

android_tv_cm311-1a-yst_s905l3a.tar.xz 这个吗？这个刷完没有adb，也没法从u盘启动

ophub · 2022-12-14T06:44:36Z

#517 (comment)

这个

ruanimal · 2022-12-14T07:04:44Z

晚上试试

kaliefgrieve00-gmail · 2022-12-14T07:58:15Z

我这个之前来的时候是乌班图系统，因为我习惯用迪拜，然后用，恢复包，恢复成安卓系统，然后开新助手，设置从SD卡启动。也能够进去，就是网络识别不了，不知道是不是要改什么uboot. 我感觉我的刷机流程没有问是旧，我试试旧的版本的镜像有没有这个网卡的问题。发自我的iPhone 在 2022年12月14日，15:05，Ponder ***@***.***> 写道：晚上试试 — Reply to this email directly, view it on GitHub<#812 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/A4TVAMURIVNVFQYX67N6UBTWNFWRNANCNFSM6AAAAAAS57SZ6Q>. You are receiving this because you authored the thread.Message ID: ***@***.***>

kaliefgrieve00-gmail · 2022-12-14T08:41:49Z

#517 (comment)

这个

我刷回去的安卓,就是用的你这个版本.

重新刷了 debian的报上面的错误

kaliefgrieve00-gmail · 2022-12-14T08:42:42Z

kaliefgrieve00-gmail · 2022-12-14T09:00:11Z

Armbian_23.02.0_amlogic_s905l3a_bullseye_5.15.82_server_2022.12.12.img 我试试 5.15内核这个版本能不能装上网卡驱动

kaliefgrieve00-gmail · 2022-12-14T09:18:52Z

启动5.15的内核不停报错

ruanimal · 2022-12-14T09:22:22Z

你的型号和我这个一样吗

kaliefgrieve00-gmail · 2022-12-14T09:31:44Z

你的型号和我这个一样吗

一模一样的型号

kaliefgrieve00-gmail · 2022-12-14T09:34:59Z

你的型号和我这个一样吗

你用的amrdebian的img 是哪一天的方便上传一个码? 最新的两个内核版本我都试了不行
6.0的网卡无法获取ip
5.15的一直包错误 ext4-fs error

ruanimal · 2022-12-14T09:50:17Z

一样的问题，最新的版本都不能工作

janko888 · 2022-12-14T10:00:51Z

6.0的网卡无法获取ip

顺手改了一个dtb给你试试，我没这款盒子试不了。6.0内核
cm311-6.0.zip

kaliefgrieve00-gmail · 2022-12-14T10:03:09Z

6.0的网卡无法获取ip

顺手改了一个dtb给你试试，我没这款盒子试不了。6.0内核 cm311-6.0.zip

你给的这个怎么用呢

janko888 · 2022-12-14T10:06:05Z

你给的这个怎么用呢

啊，这。。。
解压出里面的dtb,放到你刷了6.0内核的U盘里面的/dtb/amlogic/目录下，其它的保持不变，如果你是按cm311-1a教程配置好的话。。

kaliefgrieve00-gmail · 2022-12-14T10:08:03Z

1 安装armbin的时候,和安卓的rom有关系吗? 重新刷回安卓我是这样设置的

kaliefgrieve00-gmail · 2022-12-14T10:10:26Z

你给的这个怎么用呢

啊，这。。。解压出里面的dtb,放到你刷了6.0内核的U盘里面的/dtb/amlogic/目录下，其它的保持不变，如果你是按cm311-1a教程配置好的话。。

号的我替换试试

ruanimal · 2022-12-14T10:12:44Z

6.0的网卡无法获取ip

顺手改了一个dtb给你试试，我没这款盒子试不了。6.0内核 cm311-6.0.zip

测试可以使用，但是感觉还是比较卡，开机大概得5分钟

janko888 · 2022-12-14T10:13:30Z

测试可以使用，但是感觉还是比较卡，开机大概得5分钟

网卡识别获取IP了吧？

ruanimal · 2022-12-14T10:14:40Z

网卡识别获取IP了吧？

是的，功能初步看也正常。
为啥原来的dtb不行，和前面说的底包有关吗？我对了分区表和 #517 里面是一样的。

janko888 · 2022-12-14T10:17:06Z

问题还多着呢，待会不知道你的盒子会不会写不进入emmc，或者写入emmc不能再从USB启动了，等等，哈哈，慢慢挖掘吧。这个能用5.15的尽量用5.15.稳定

ruanimal · 2022-12-14T10:22:01Z

问题还多着呢，待会不知道你的盒子会不会写不进入emmc，或者写入emmc不能再从USB启动了，等等，哈哈，慢慢挖掘吧。这个能用5.15的尽量用5.15.稳定

关键是5.15也不能用啊

kaliefgrieve00-gmail · 2022-12-14T10:22:52Z

问题还多着呢，待会不知道你的盒子会不会写不进入emmc，或者写入emmc不能再从USB启动了，等等，哈哈，慢慢挖掘吧。这个能用5.15的尽量用5.15.稳定

关键是5.15也不能用啊

链接: https://pan.baidu.com/s/117mddzK5Nypobq5KNtlj7g?pwd=epbq 提取码: epbq 复制这段内容后打开百度网盘手机App，操作更方便哦
--来自百度网盘超级会员v6的分享你试试这个版本的安卓和他里面的arnbian. 我刷了他的安卓刷了他的armbin 是可以获取ip的

janko888 · 2022-12-14T10:23:00Z

为啥原来的dtb不行，和前面说的底包有关吗？

版本差异比较大底包有可能影响一些device吧，例如安卓4和安卓9的差别，根据我的经验来了解的话。但这里这个不是这个原因

ruanimal · 2022-12-14T10:25:26Z

链接: https://pan.baidu.com/s/117mddzK5Nypobq5KNtlj7g?pwd=epbq 提取码: epbq 复制这段内容后打开百度网盘手机App，操作更方便哦 --来自百度网盘超级会员v6的分享你试试这个版本的安卓和他里面的arnbian. 我刷了他的安卓刷了他的armbin 是可以获取ip的

我试试看，还有微信号编辑掉吧

kaliefgrieve00-gmail · 2022-12-14T10:26:29Z

链接: https://pan.baidu.com/s/117mddzK5Nypobq5KNtlj7g?pwd=epbq 提取码: epbq 复制这段内容后打开百度网盘手机App，操作更方便哦 --来自百度网盘超级会员v6的分享你试试这个版本的安卓和他里面的arnbian. 我刷了他的安卓刷了他的armbin 是可以获取ip的

我试试看，还有微信号编辑掉吧

去掉了

ruanimal · 2022-12-14T10:30:10Z

版本差异比较大底包有可能影响一些device吧，例如安卓4和安卓9的差别，根据我的经验来了解的话。但这里这个不是这个原因

M401A 用最新6.0内核又稳得很，这魔百盒真是奇葩

kaliefgrieve00-gmail · 2022-12-14T10:31:46Z

kaliefgrieve00-gmail · 2022-12-14T10:32:53Z

版本差异比较大底包有可能影响一些device吧，例如安卓4和安卓9的差别，根据我的经验来了解的话。但这里这个不是这个原因

M401A 用最新6.0内核又稳得很，这魔百盒真是奇葩

是不是刷了armbian之后,就和之前的安卓没有关系了. u-boot之类的也是和安卓没有关系

janko888 · 2022-12-14T10:42:39Z

是不是刷了armbian之后,就和之前的安卓没有关系了. u-boot之类的也是和安卓没有关系

看写入EMMC时是把主线U-boot同时写入咯，不写入的话还是用安卓的bootloader,看设备和内核不同，方式也不同

janko888 · 2022-12-14T10:44:19Z

M401A 用最新6.0内核又稳得很，这魔百盒真是奇葩

目前s905l3a三个型号在6.0下都应该有这个问题吧，但我没有其余两款盒子，试不了。

ruanimal · 2022-12-14T11:19:39Z

目前s905l3a三个型号在6.0下都应该有这个问题吧，但我没有其余两款盒子，试不了。

刷的应该是这个版本 Armbian_23.02.0_amlogic_s905l3a_jammy_6.0.12_server_2022.12.12.img
对4k显示器的支持好像不太行，有时能输出有时黑屏，别的很稳定，跑了压力测试也没啥问题

ruanimal · 2022-12-14T11:22:21Z

另外问个问题，在系统里apt update 应该不会影响内核吧。如果觉得某个版本稳定，是不是可以不跟进armbian
的build版本，只用apt更新系统就行了。

janko888 · 2022-12-14T11:25:28Z

另外问个问题，在系统里apt update 应该不会影响内核吧。如果觉得某个版本稳定，是不是可以不跟进armbian 的build版本，只用apt更新系统就行了。

以前曾经有过apt upgrade 更新替换了F大了内核文件导致开不了机的报告，后来O大应该修复了吧，最近的版本都没有听过有这些事儿。

ophub · 2022-12-14T12:40:21Z

amlogic-s9xxx-armbian/build-armbian/armbian-files/common-files/usr/sbin/armbian-fix

Lines 43 to 46 in 41be46f

    
           # Remove packages 
        
           [[ -n "$(dpkg -l | awk '{print $2}' | grep linux-image-*)" ]] && sudo apt-get remove -qq --purge -y linux-image-* && echo "15. Remove linux-image-*" 
        
           [[ -n "$(dpkg -l | awk '{print $2}' | grep linux-dtb-*)" ]] && sudo apt-get remove -qq --purge -y linux-dtb-* && echo "16. Remove linux-dtb-*" 
        
           [[ -n "$(dpkg -l | awk '{print $2}' | grep linux-u-boot-*)" ]] && sudo apt-get remove -qq --purge -y linux-u-boot-* && echo "17. Remove linux-u-boot-*"

原来的已经移除了，所以更新不会有影响。

ophub · 2022-12-14T12:42:58Z

6.0的内核听说这个可能是LTS，这个内核有什么通病的问题？

janko888 · 2022-12-14T12:53:24Z

6.0的内核听说这个可能是LTS，这个内核有什么通病的问题？

还是之前说6.0的meson-g12-common.dtsi这个问题，上一次修改里ethmac主动添加了
resets = <&reset RESET_ETHERNET>;
reset-names = "stmmaceth";

这个修改我不太明白其用意，但的确影响了继承自这个dtsi的3个(或许有更多有继承这个基类dtb的盒子？)s905l3a的网卡获取IP了

janko888 · 2022-12-14T12:54:22Z

5.15等几个内核倒没有修改这个。

ophub · 2022-12-14T13:09:57Z

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi?h=v6.0.13#n168

原来的没有，可能是哪个补丁带来的。
你把其他的几个6.0的dts都修一下吧，几个都在6.0都报网卡无法识别的问题。

等几天f大发了6.1再看一下是不是也有这个问题

janko888 · 2022-12-14T13:11:05Z

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi?h=v6.0.13#n168

原来的没有，可能是哪个补丁带来的。你把其他的几个6.0的dts都修一下吧，几个都在6.0都报网卡无法识别的问题。

等几天f大发了6.1再看一下是不是也有这个问题

好的。

janko888 · 2022-12-14T13:51:44Z

等几天f大发了6.1再看一下是不是也有这个问题

初步看了一下，用到meson-g12-common.dtsi这个基类dtb的有非常多型号，我不知道是否某些盒子必须要有那个两个属性的。这个得灯O大得跟F大沟通确认一下，我先把有把握得调用u200.dts那两个修改先提交了哈：）

ruanimal · 2022-12-14T13:58:39Z

#517 (comment)

这个

下载下来看了一下，和 https://github.com/ophub/kernel/releases/download/tools/android_tv_cm311-1a-yst_s905l3a.tar.xz 镜像是一样的

@kaliefgrieve00-gmail 我记得这个刷完是不能从U盘启动的啊，你是怎么操作的。

还有这个 “把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

ophub · 2022-12-14T14:10:33Z

s905l3a的这几个都有反馈网卡不正常工作，都可以用你的方法修复。

janko888 · 2022-12-14T14:13:56Z

嗯，也可能这个修改只在l3a这个soc有问题，持续观察咯

kaliefgrieve00-gmail · 2022-12-14T14:49:15Z

#517 (comment)
这个

下载下来看了一下，和 https://github.com/ophub/kernel/releases/download/tools/android_tv_cm311-1a-yst_s905l3a.tar.xz 镜像是一样的

@kaliefgrieve00-gmail 我记得这个刷完是不能从U盘启动的啊，你是怎么操作的。

还有这个 “把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

刷完安卓之后,用电视开心助手,设置从u盘启动

kaliefgrieve00-gmail · 2022-12-14T14:51:27Z

把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

把【擦除flash】和【擦除bootloader】两项去勾” 有什么作用

这个不勾选,从u盘启动,还是会提示安卓镜像的恢复模式选项

kaliefgrieve00-gmail · 2022-12-14T15:29:21Z

我现在有点迷茫了.不知道怎么了最新的5.15的debian 又都正常了

整理下 ,希望能帮助到有需要的人

armbian-install -m yes log

➜  ~ ssh root@192.168.2.234
The authenticity of host '192.168.2.234 (192.168.2.234)' can't be established.
ED25519 key fingerprint is SHA256:dyOLyJbZGItOPJmOIFRNKyr2sccA9rGMsIFi4EweEwM.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.234' (ED25519) to the list of known hosts.

root@192.168.2.234's password:
    _              _   ____  ___   ___  ____  _ _____
   / \   _ __ ___ | | / ___|/ _ \ / _ \| ___|| |___ /  __ _
  / _ \ | '_ ` _ \| | \___ \ (_) | | | |___ \| | |_ \ / _` |
 / ___ \| | | | | | |  ___) \__, | |_| |___) | |___) | (_| |
/_/   \_\_| |_| |_|_| |____/  /_/ \___/|____/|_|____/ \__,_|

Welcome to Armbian 23.02.0-trunk Bullseye with Linux 5.15.82-flippy-79+o

System load:   81%              Up time:       5 min
Memory usage:  8% of 1.91G      IP:            192.168.2.234
CPU temp:      39°C             Usage of /:    59% of 2.4G
storage/:      40% of 252M
RX today:      31.5 KiB

Last login: Wed Dec 14 23:01:50 2022
root@armbian:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
    link/sit 0.0.0.0 brd 0.0.0.0
3: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1000
    link/tunnel6 :: brd :: permaddr 8266:e3f2:e246::
4: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 9e:61:a7:8a:88:aa brd ff:ff:ff:ff:ff:ff permaddr 02:00:00:0e:35:01
    inet 192.168.2.234/24 brd 192.168.2.255 scope global dynamic noprefixroute eth0
       valid_lft 86385sec preferred_lft 86385sec
    inet6 fe80::7f23:d658:eb34:c198/64 scope link noprefixroute
       valid_lft forever preferred_lft forever











root@armbian:~# armbian-install -m yes
[ STEPS ] Start install armbian to emmc...
[ INFO ] Custom setting parameters: [ -m yes ]
[ STEPS ] Start initializing the environment...
[ INFO ] Use mainline u-boot: [ yes ]
[ INFO ] Using the Ampart tool: [ yes ]
[ INFO ] Show all lists: [ no ]
[ INFO ] DEV_EMMC: [ /dev/mmcblk2 ]
[ STEPS ] Start selecting device...
--------------------------------------------------------------------------------------
ID    SOC        MODEL                          DTB                             
--------------------------------------------------------------------------------------
301   s905x2     X96-Max-4GB/Tx5-Max            meson-g12a-x96-max.dtb          
302   s905x2     X96-Max-2GB                    meson-g12a-x96-max-rmii.dtb     
303   s905x2     MECOOL-KM3-4G                  meson-g12a-sei510.dtb           
304   s905l3a    E900V22C-D                     meson-g12a-s905l3a-e900v22c.dtb 
305   s905l3a    CM311-1a-YST                   meson-g12a-s905l3a-cm311.dtb    
306   s905l3a    M401A/ZTE-B863AV3.2-M          meson-g12a-s905l3a-m401a.dtb    
0     Other      Customize                      Enter-custom-dtb-name           
--------------------------------------------------------------------------------------
[ OPTIONS ] Please Input ID: 305
[ INFO ] Input Box ID: [ 305 ]
[ INFO ] FDTFILE: [ meson-g12a-s905l3a-cm311.dtb ]
[ INFO ] MAINLINE_UBOOT: [  ]
[ INFO ] BOOTLOADER_IMG:  [  ]
[ INFO ] UBOOT_OVERLOAD: [ u-boot-e900v22c.bin ]
[ INFO ] K510: [ 0 ]
[ STEPS ] Start selecting file system type...
-----------------------------------------------
ID  TYPE
-----------------------------------------------
1   ext4
2   btrfs
-----------------------------------------------
[ OPTIONS ] Please Input ID: 1
[ INFO ] Input Type ID: [ 1 ]
[ INFO ] The type of file system: [ ext4 ]
[ STEPS ] Start creating eMMC partition...
[ INFO ] Start backup default bootloader.
4+0 records in
4+0 records out
4194304 bytes (4.2 MB, 4.0 MiB) copied, 2.81068 s, 1.5 MB/s
1+0 records in
1+0 records out
512 bytes copied, 0.00867236 s, 59.0 kB/s
[ STEPS ] Use ampart partition successfully.
[ INFO ] Start create MBR and partittion.
[ INFO ] Restore the mybox bootloader: [ /usr/lib/u-boot/mybox-bootloader.img ]
444+0 records in
444+0 records out
444 bytes copied, 0.0029564 s, 150 kB/s
8191+0 records in
8191+0 records out
4193792 bytes (4.2 MB, 4.0 MiB) copied, 0.295068 s, 14.2 MB/s
[ STEPS ] Start processing the bootfs partition...
[ INFO ] Formatting BOOTFS partition.
mkfs.fat 4.2 (2021-01-31)
[ INFO ] Start copy BOOTFS partition data.
[ INFO ] Generate the new [ uEnv.txt ] file.
[ INFO ] Copy [ u-boot-e900v22c.bin ] to u-boot.emmc
[ STEPS ] Start processing the rootfs partition...
[ INFO ] Formatting ROOTFS partition.
[ INFO ] Start copy ROOTFS partition data.
[ INFO ] Copy the [ etc ] directory.
[ INFO ] Copy the [ home ] directory.
[ INFO ] Copy the [ lib64 ] directory.
[ INFO ] Copy the [ opt ] directory.
[ INFO ] Copy the [ root ] directory.
[ INFO ] Copy the [ selinux ] directory.
[ INFO ] Copy the [ srv ] directory.
[ INFO ] Copy the [ usr ] directory.
[ INFO ] Copy the [ var ] directory.
[ INFO ] Generate the new fstab file.
[ INFO ] Update the relevant parameters.
[ SUCCESS ] Successful installed, please unplug the USB, re-insert the power supply to start the armbian.

armbian-update 升级系统 log

➜  ~ ssh root@192.168.2.154
The authenticity of host '192.168.2.154 (192.168.2.154)' can't be established.
ED25519 key fingerprint is SHA256:Cvo+cThSgjLX3WV1Z1xYXUVhX80/3LYWmKNxuyoKy34.
This key is not known by any other names.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '192.168.2.154' (ED25519) to the list of known hosts.
root@192.168.2.154's password:
    _              _   ____  ___   ___  ____  _ _____
   / \   _ __ ___ | | / ___|/ _ \ / _ \| ___|| |___ /  __ _
  / _ \ | '_ ` _ \| | \___ \ (_) | | | |___ \| | |_ \ / _` |
 / ___ \| | | | | | |  ___) \__, | |_| |___) | |___) | (_| |
/_/   \_\_| |_| |_|_| |____/  /_/ \___/|____/|_|____/ \__,_|

Welcome to Armbian 23.02.0-trunk Bullseye with Linux 5.15.82-flippy-79+o

System load:   12%              Up time:       1 min
Memory usage:  6% of 1.91G      IP:            192.168.2.154
CPU temp:      37°C             Usage of /:    11% of 14G
RX today:      44.8 KiB

Last login: Wed Dec 14 23:13:42 2022






root@armbian:~# passwd
New password:
Retype new password:
passwd: password updated successfully




root@armbian:~# nano /etc/apt/sources.list



root@armbian:~# sudo apt install apt-transport-https ca-certificates
Reading package lists... Done
Building dependency tree... Done
Note, selecting 'apt' instead of 'apt-transport-https'
apt is already the newest version (2.2.4).
ca-certificates is already the newest version (20210119).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.




root@armbian:~# armbian-update
[ STEPS ] Ready to update, please wait...
[ STEPS ] Start installing the necessary dependencies...
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye InRelease [116 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates InRelease [44.1 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports InRelease [49.0 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security InRelease [48.4 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main armhf Packages [10.8 MB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 Packages [10.9 MB]
Get:7 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main armhf Contents (deb) [9,306 kB]
Get:8 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main all Contents (deb) [31.0 MB]
Get:9 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 Contents (deb) [9,831 kB]
Get:10 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib armhf Packages [47.8 kB]
Get:11 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib arm64 Packages [49.0 kB]
Get:12 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib arm64 Contents (deb) [29.6 kB]
Get:13 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib armhf Contents (deb) [29.2 kB]
Get:14 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/contrib all Contents (deb) [57.3 kB]
Get:15 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free armhf Packages [67.2 kB]
Get:16 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free arm64 Packages [88.5 kB]
Get:17 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free arm64 Contents (deb) [37.2 kB]
Get:18 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free all Contents (deb) [888 kB]
Get:19 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/non-free armhf Contents (deb) [13.4 kB]
Get:20 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main armhf Packages [12.0 kB]
Get:21 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main arm64 Packages [12.0 kB]
Get:22 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main all Contents (deb) [25.0 kB]
Get:23 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main arm64 Contents (deb) [42.8 kB]
Get:24 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-updates/main armhf Contents (deb) [45.0 kB]
Get:25 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main arm64 Packages [365 kB]
Get:26 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main armhf Packages [362 kB]
Get:27 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main armhf Contents (deb) [1,529 kB]
Get:28 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main arm64 Contents (deb) [1,374 kB]
Get:29 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/main all Contents (deb) [4,703 kB]
Get:30 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib armhf Packages [3,316 B]
Get:31 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib arm64 Packages [3,844 B]
Get:32 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib armhf Contents (deb) [16.1 kB]
Get:33 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib all Contents (deb) [7,636 B]
Get:34 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/contrib arm64 Contents (deb) [16.3 kB]
Get:35 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free arm64 Packages [9,864 B]
Get:36 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free armhf Packages [9,060 B]
Get:37 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free all Contents (deb) [57.6 kB]
Get:38 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free armhf Contents (deb) [3,663 B]
Get:39 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye-backports/non-free arm64 Contents (deb) [5,710 B]
Get:40 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security/main arm64 Packages [260 kB]
Get:41 https://mirrors.tuna.tsinghua.edu.cn/debian-security bullseye-security/main armhf Packages [260 kB]
Fetched 82.6 MB in 54s (1,526 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
coreutils is already the newest version (8.32-4).
tar is already the newest version (1.34+dfsg-1).
The following additional packages will be installed:
  libapr1 libaprutil1 libserf-1-1 libsvn1 libutf8proc2
Suggested packages:
  db5.3-util libapache2-mod-svn subversion-tools
The following NEW packages will be installed:
  libapr1 libaprutil1 libserf-1-1 libsvn1 libutf8proc2 subversion
0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
Need to get 2,593 kB of archives.
After this operation, 10.3 MB of additional disk space will be used.
Get:1 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libapr1 arm64 1.7.0-6+deb11u1 [98.8 kB]
Get:2 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libaprutil1 arm64 1.6.1-5 [89.6 kB]
Get:3 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libserf-1-1 arm64 1.3.9-10 [52.6 kB]
Get:4 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libutf8proc2 arm64 2.5.0-1 [54.2 kB]
Get:5 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 libsvn1 arm64 1.14.1-3+deb11u1 [1,320 kB]
Get:6 https://mirrors.tuna.tsinghua.edu.cn/debian bullseye/main arm64 subversion arm64 1.14.1-3+deb11u1 [978 kB]
Fetched 2,593 kB in 1s (2,411 kB/s)
Selecting previously unselected package libapr1:arm64.
(Reading database ... 37385 files and directories currently installed.)
Preparing to unpack .../0-libapr1_1.7.0-6+deb11u1_arm64.deb ...
Unpacking libapr1:arm64 (1.7.0-6+deb11u1) ...
Selecting previously unselected package libaprutil1:arm64.
Preparing to unpack .../1-libaprutil1_1.6.1-5_arm64.deb ...
Unpacking libaprutil1:arm64 (1.6.1-5) ...
Selecting previously unselected package libserf-1-1:arm64.
Preparing to unpack .../2-libserf-1-1_1.3.9-10_arm64.deb ...
Unpacking libserf-1-1:arm64 (1.3.9-10) ...
Selecting previously unselected package libutf8proc2:arm64.
Preparing to unpack .../3-libutf8proc2_2.5.0-1_arm64.deb ...
Unpacking libutf8proc2:arm64 (2.5.0-1) ...
Selecting previously unselected package libsvn1:arm64.
Preparing to unpack .../4-libsvn1_1.14.1-3+deb11u1_arm64.deb ...
Unpacking libsvn1:arm64 (1.14.1-3+deb11u1) ...
Selecting previously unselected package subversion.
Preparing to unpack .../5-subversion_1.14.1-3+deb11u1_arm64.deb ...
Unpacking subversion (1.14.1-3+deb11u1) ...
Setting up libutf8proc2:arm64 (2.5.0-1) ...
Setting up libapr1:arm64 (1.7.0-6+deb11u1) ...
Setting up libaprutil1:arm64 (1.6.1-5) ...
Setting up libserf-1-1:arm64 (1.3.9-10) ...
Setting up libsvn1:arm64 (1.14.1-3+deb11u1) ...
Setting up subversion (1.14.1-3+deb11u1) ...
Processing triggers for libc-bin (2.31-13+deb11u5) ...
Processing triggers for man-db (2.9.4-2) ...
[ STEPS ] Start initializing the environment...
[ INFO ] Armbian PLATFORM: [ amlogic ]
[ INFO ] Set the kernel name: [  ]
[ INFO ] Set the kernel directory: [ stable ]
[ INFO ] Current version: 5.15.82, Latest version: 5.15.83
[ STEPS ] Start downloading the kernel from [ https://github.com/ophub/kernel/tree/main/pub/stable/5.15.83 ]...
A    .
A    boot-5.15.83-flippy-80+o.tar.gz
A    dtb-allwinner-5.15.83-flippy-80+o.tar.gz
A    dtb-amlogic-5.15.83-flippy-80+o.tar.gz
A    dtb-rockchip-5.15.83-flippy-80+o.tar.gz
A    header-5.15.83-flippy-80+o.tar.gz
A    modules-5.15.83-flippy-80+o.tar.gz
A    sha256sums
Exported revision 644.

[ STEPS ] Start checking the kernel...
[ INFO ] Kernel name: [ 5.15.83-flippy-80+o ]
[ INFO ] K510: [ 0 ]
[ INFO ] Enable sha256sum checking...
[ INFO ] (1/4) [ boot-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.
[ INFO ] (2/4) [ dtb-amlogic-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.
[ INFO ] (3/4) [ header-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.
[ INFO ] (4/4) [ modules-5.15.83-flippy-80+o.tar.gz ] file sha256sum check same.

[ STEPS ] Start unpacking the kernel...
[ INFO ] (1/4) Unpacking [ boot-5.15.83-flippy-80+o.tar.gz ] done.
[ INFO ] (2/4) Unpacking [ dtb-amlogic-5.15.83-flippy-80+o.tar.gz ] done.
[ INFO ] (3/4) Unpacking [ header-5.15.83-flippy-80+o.tar.gz ] done.
[ INFO ] (4/4) Unpacking [ modules-5.15.83-flippy-80+o.tar.gz ] done.

[ STEPS ] Start updating the uboot...

[ SUCCESS ] Successfully updated, automatic restarting...
Connection to 192.168.2.154 closed by remote host.
Connection to 192.168.2.154 closed.

ophub changed the title ~~s905l3a CM311-1a-YST meson8b-dwmac ff3f0000.ethernet eth0: no phy at addr -1 meson8b-dwmac ff3f0000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)~~ s905l3a CM311-1a-YST: Cannot attach to PHY (error: -19) Dec 14, 2022

ophub added documentation Improvements or additions to documentation support This need is supported labels Dec 14, 2022

kaliefgrieve00-gmail closed this as completed Dec 14, 2022

shawwwn mentioned this issue Dec 24, 2022

X96MaxPlus5 no ethernet using mainline bootloader #857

Closed

s905l3a CM311-1a-YST: Cannot attach to PHY (error: -19) #812

s905l3a CM311-1a-YST: Cannot attach to PHY (error: -19) #812

Comments

kaliefgrieve00-gmail commented Dec 14, 2022

ruanimal commented Dec 14, 2022

ophub commented Dec 14, 2022

ruanimal commented Dec 14, 2022

ophub commented Dec 14, 2022

ruanimal commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022 via email

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

ruanimal commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022 • edited Loading

kaliefgrieve00-gmail commented Dec 14, 2022

ruanimal commented Dec 14, 2022

janko888 commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

janko888 commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

ruanimal commented Dec 14, 2022

janko888 commented Dec 14, 2022

ruanimal commented Dec 14, 2022 • edited Loading

janko888 commented Dec 14, 2022

ruanimal commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

janko888 commented Dec 14, 2022 • edited Loading

ruanimal commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

ruanimal commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

janko888 commented Dec 14, 2022

janko888 commented Dec 14, 2022

ruanimal commented Dec 14, 2022

ruanimal commented Dec 14, 2022

janko888 commented Dec 14, 2022

ophub commented Dec 14, 2022

ophub commented Dec 14, 2022

janko888 commented Dec 14, 2022

janko888 commented Dec 14, 2022

ophub commented Dec 14, 2022

janko888 commented Dec 14, 2022

janko888 commented Dec 14, 2022

ruanimal commented Dec 14, 2022 • edited Loading

ophub commented Dec 14, 2022

janko888 commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022

kaliefgrieve00-gmail commented Dec 14, 2022 •

edited

Loading

ruanimal commented Dec 14, 2022 •

edited

Loading

janko888 commented Dec 14, 2022 •

edited

Loading

ruanimal commented Dec 14, 2022 •

edited

Loading