Copyright (c) 2017 Paul van Haastrecht paulvha@hotmail.com
This PPD42 utility willread, display and log the data from a PPD42NJ (GROOVE) sensor AND (optional) a DYLOS device on Linux.
It has been tested on a Raspberry Pi-3 (Jessie) and with a DC1700.
PPD42 monitor is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
For detailed documentation about the project see the ppd42monitor.odt
Software installation
BCM2835 library installation Install latest from BCM2835 from : http://www.airspayce.com/mikem/bcm2835/
- wget http://www.airspayce.com/mikem/bcm2835/bcm2835-1.50.tar.gz
- tar -zxf bcm2835-1.50.tar.gz // 1.50 = version at current time
- cd bcm2835-1.50
- ./configure
- sudo make check
- sudo make install
PPD42 software installation
- tar -zxf ppd42-1.1.tar.gz
- cd ppd42
- compile to handle PPD42 only : “./setup.sh ppd42”
- compile including Dylos support : “./setup.sh +DYLOS”
- start ./ppd42 -h for help options