Skip to content

Releases: pfeerick-rock64/linux-build

1.0: jenkins-rock64-linux-20

15 May 06:51
@pfeerick pfeerick
1.0
cec295f
Compare
Choose a tag to compare
1.0: jenkins-rock64-linux-20 Pre-release
Pre-release

Notes:

  • Derivative version of ayufan's builds for my own use - please buy ayufan a beer if it is of any use to you as he did the bulk of the work.

  • The RELEASES is the latest stable version. The pre-release is the latest development version.

  • Use u-boot recovery mode selection: ayufan-rock64/linux-u-boot@ea6efec

  • To enable upgrading to pre-releases edit nano /etc/apt/sources.list.d/ayufan-rock64.list,

OpenMediaVault:

  • Use armhf variant as one that offers the best compatibility,

Xenial / Container Linux:

  • It has Docker Community Edition / Docker Compose / Kubernetes-admin installed for easy Containers use,

Credentials:

  • All variants except OMV: rock64/rock64
  • OMV: admin/openmediavault (for Web), root/openmediavault (for Console). To enable SSH for OMV go to Web > SSH > Permit Root Login > Save > Apply

Upgrade:

sudo apt-get update -y
sudo apt-get install linux-rock64 -y

0.6.x

  • 0.6.35: Rebase 4.4 kernel on rockchip-linux/kernel@b075e3b,
  • 0.6.35: Rebase mainline kernel on rockchip-linux/kernel@fff75eb,
  • 0.6.34: Release all variants, including desktop,
  • 0.6.33: Bionic stable release,
  • 0.6.32: Bump bionic and jessie/stretch openmediavault releases to latest version,
  • 0.6.31: Include additional kernel modules: ayufan-rock64/linux-kernel#25,
  • 0.6.30: Include additional kernel modules: ayufan-rock64/linux-kernel#24,
  • 0.6.30: Improve compatibility of u-boot-rock64 package,
  • 0.6.29: Enable additional Realtek WiFi modules (ex. AC adapter),
  • 0.6.29: Introduce u-boot-rock64 which can be used for upgrading bootloader,
  • 0.6.29: Add rock64_reset_emmc.sh script which can be used with eMMC jumper to easily flash eMMC from SD,
  • 0.6.29: Improve thermal limits to make cpuburn to run stable,
  • 0.6.28: Fix soft boot issue: boot with DDR333, and then use DFI to configure RAM speed: it has negative effect on mainline, running only in DDR333,
  • 0.6.27: Fix not booting issue introduced in 0.6.26,
  • 0.6.27: Disable eth1 by default, ask for enabling it,
  • 0.6.26: Add USB quirks to kernel, instead of modules,
  • 0.6.26: Do not enable quirks on boot, thus do not upgrade initrd, and prevent the flash-kernel from executing,
  • 0.6.26: Enable bunch of kernel modules for 4.4,
  • 0.6.26: Rebase 4.4 kernel on rockchip-linux/kernel@7482a49a2de6,
  • 0.6.26: Rebase mainline kernel on torvalds/linux@1b5f3ba415fe,
  • 0.6.25: Make HDMI a first audio device,
  • 0.6.25: Add lxde desktop environment,
  • 0.6.25: Add rkmpv to simplify video playback,
  • 0.6.25: Update libmali, ffmpeg, mpv, and xf86-video-armsoc,
  • 0.6.25: Rebase 4.4 kernel on rockchip-linux/kernel@eae92ae,
  • 0.6.25: Reabse mainline kernel on torvalds/linux@5d60e05,
  • 0.6.24: Use armsoc for X11,
  • 0.6.24: Improve libmali and extend install_desktop to support LXDE/XFCE4/Gnome,
  • 0.6.24: Fix flash-kernel causing bionic to fail,
  • 0.6.24: Include additional wireless drivers from Xalius,
  • 0.6.24: Make extlinux to use dual-boot to allow to choose current, or previous kernel,
  • 0.6.23: Disable CONFIG_SCHED_WALT to increase system stability,
  • 0.6.22: Rebase 4.4 kernel on rockchip-linux/kernel@7b43537,
  • 0.6.21: Include BL31 in bootloader, this fixes kernel booting,
  • 0.6.20: Fix HDMI and USB2.0 on 4.4 kernel,
  • 0.6.19: Fix 4.4 kernel emmc and gmac2io ordering, to be always first,
  • 0.6.18: Fix 4.4 kernel not booting,
  • 0.6.17: Rebase and flatten all kernel patches on top of rockchip-4.4,
  • 0.6.17: Enable dvfs for DRAM,
  • 0.6.16: Limit USB3 to HS mode in u-boot,
  • 0.6.15: Introduce Containers Linux: it has bundled latest Docker Community Edition, Docker Compose and Kubernetes tools,
  • 0.6.15: Introduce OpenMediaVault 4.0 Stretch edition (alpha/alpha)
  • 0.6.14: Fix USB3 booting from SPI,
  • 0.6.14: Fix leds handling in Linux,
  • 0.6.13: Tune tx/rx delay for gmac2io to make it stable without additional userspace quirks on: 4.4 kernel, 4.15 kernel and in u-boot (PXE booting is possible now! yay!).
  • 0.6.13: The 4.4 and 4.15 kernels do support configfs dt overlays,
  • 0.6.13: Enable ZRAM support for mainline,
  • 0.6.12: Use older ATF (for rk322xh) which solves serial/ethernet address and booting of mainline kernel: ayufan-rock64/arm-trusted-firmware@f947c7e
  • 0.6.11: Use different delays for u-boot PXE to make it work,
  • 0.6.10: Add images to flash u-boot to SPI,
  • 0.6.10: Fix rock64_write|erase_spi_flash.sh,
  • 0.6.9: Fix USB booting from OTG,
  • 0.6.9: Enable SPI support for Winbond in u-boot,
  • 0.6.9: Introduce recovery button mode selection: ayufan-rock64/linux-u-boot@ea6efec,
  • 0.6.9: Enable control of rk805 leds from u-boot,
  • 0.6.9: The rock64_write|erase_spi_flash.sh check MTD name,
  • 0.6.8: Fix rock64_write|erase_spi_flash.sh scripts,
  • 0.6.7: Fix u-boot booting (regression since 0.6.6),
  • 0.6.6: Fix eMMC not working since 0.6.1,
  • 0.6.6: U-boot supports USB2/3 booting,
  • 0.6.6: Use Rockchip's u-boot tree,
  • 0.6.5: Tag all dependent repositories,
  • 0.6.4: Include mainline kernel in release,
  • 0.6.3: Rebase mainline kernel and u-boot patches,
  • 0.6.3: Fix libmali (make it work),
  • 0.6.3: Fix small bug in rock64_write_spi_flash.sh,
  • 0.6.2: Use RK DDR and SPL (allows SPI booting),
  • 0.6.2: Release bionic instead of artful,
  • 0.6.2: Include a bunch of updated drivers: xserver, libdrm, xf86-video-armsoc, etc.,
  • 0.6.2: Include updated 4.4 kernel,
  • 0.6.1: Make SPL/TPL actually to work,
  • 0.6.1: Introduce rock64_write_spi_flash.sh and rock64_erase_spi_flash.sh,
  • 0.6.0: Highly experimental,
  • 0.6.0: Use SPL/TPL instead of Rockchip's loaders (supports flashing and booting from SPI),

http://jenkins.peterfeerick.com.au/job/rock64-linux/20/

Assets 11
Loading