5.15.5 (21.10) #83
Closed
5.15.5 (21.10) #83
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit 9ee5d6e ] Correct kdump hangs when controller is locked up. There are occasions when a controller reboot (controller soft reset) is issued when a controller firmware crash dump is in progress. This leads to incomplete controller firmware crash dump: - When the controller crash dump is in progress, and a kdump is initiated, the driver issues inbound doorbell reset to bring back the controller in SIS mode. - If the controller is in locked up state, the inbound doorbell reset does not work causing controller initialization failures. This results in the driver hanging waiting for SIS mode. To avoid an incomplete controller crash dump, add in a controller crash dump handshake: - Controller will indicate start and end of the controller crash dump by setting some register bits. - Driver will look these bits when a kdump is initiated. If a controller crash dump is in progress, the driver will wait for the controller crash dump to complete before issuing the controller soft reset then complete driver initialization. Link: https://lore.kernel.org/r/20210928235442.201875-3-don.brace@microchip.com Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 315e7b8 ] According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns and a delay of 15 ms after the reset has been deasserted. Set the matching values in the devicetree. Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…8336 codec [ Upstream commit 9d36cea ] These devices are based on an I2C/I2S device, we need to force the use of the SOF driver otherwise the legacy HDaudio driver will be loaded - only HDMI will be supported. Co-developed-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Huajun Li <huajun.li@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f247067 ] We don't have a configuration for a single amp on link1. BugLink: thesofproject#3161 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Link: https://lore.kernel.org/r/20211004213512.220836-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64ba6d2 ] This device is based on SDCA codecs but with a single amplifier instead of two. BugLink: thesofproject#3161 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Link: https://lore.kernel.org/r/20211004213512.220836-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7a07f7 ] The firmware_loader can be used with a pre-allocated buffer through the use of the API calls: o request_firmware_into_buf() o request_partial_firmware_into_buf() If the firmware was built-in and present, our current check for if the built-in firmware fits into the pre-allocated buffer does not return any errors, and we proceed to tell the caller that everything worked fine. It's a lie and no firmware would end up being copied into the pre-allocated buffer. So if the caller trust the result it may end up writing a bunch of 0's to a device! Fix this by making the function that checks for the pre-allocated buffer return non-void. Since the typical use case is when no pre-allocated buffer is provided make this return successfully for that case. If the built-in firmware does *not* fit into the pre-allocated buffer size return a failure as we should have been doing before. I'm not aware of users of the built-in firmware using the API calls with a pre-allocated buffer, as such I doubt this fixes any real life issue. But you never know... perhaps some oddball private tree might use it. In so far as upstream is concerned this just fixes our code for correctness. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b9a61 ] When a finger is on the screen, the UPERFECT Y portable touchscreen monitor reports a contact in the first place. However, after this initial report, contacts are not reported at the refresh rate of the screen as required by the Windows 8 specs. This behaviour triggers the release_timer, removing the fingers even though they are still present. To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the MT_QUIRK_STICKY_FINGERS quirk for this device. Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d27788 ] The kernel already has support for very similar Pioneer djm products and this work is based on that. Added device to quirks-table.h and added control info to mixer_quirks.c. Tested on my hardware and all working. Signed-off-by: William Overton <willovertonuk@gmail.com> Link: https://lore.kernel.org/r/20211010145841.11907-1-willovertonuk@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51b9e22 ] gpmc,mux-add-data is not boolean. Fixes the below errors flagged by dtbs_check. "ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'" Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…esource() [ Upstream commit 9eff2b2 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b19e4a ] A little pop can be heard obviously from HP while playing a silent. This patch fixes it by using two functions: 1. Enable HP 1bit output mode. 2. Change the charge pump switch size during playback on and off. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/20211014094054.811-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ee1500 ] This fixes dtbs-check error from simple-bus schema: soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... } From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05e63b4 ] We cannot list all the possible chips used in different board revisions, just use the generic "jedec,spi-nor" compatible instead. This also fixes dtbs_check error: ['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long Signed-off-by: Li Yang <leoyang.li@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c05f14 ] On m68k, compiling drivers under SND_ISA causes build errors: ../sound/core/isadma.c: In function 'snd_dma_program': ../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration] 33 | flags = claim_dma_lock(); | ^~~~~~~~~~~~~~ ../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration] 41 | release_dma_lock(flags); | ^~~~~~~~~~~~~~~~ ../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare': ../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function) 253 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT); | ^~~~~~~~~~~~ ../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in ../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare': ../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function) 322 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT); | ^~~~~~~~~~~~ and more... Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-m68k@lists.linux-m68k.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5240aed ] Handling of intel_iommu kernel command line option should return "true" to indicate option is valid and so avoid logging it as unknown by the core parsing code. Also log unknown sub-options at the notice level to let user know of potential typos or similar. Reported-by: Eero Tamminen <eero.t.tamminen@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://lore.kernel.org/r/20210831112947.310080-1-tvrtko.ursulin@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20211014053839.727419-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3968ddc ] When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup, which look like this one: Workqueue: events_unbound flush_to_ldisc Call trace: dump_backtrace+0x0/0x1ec show_stack+0x24/0x30 dump_stack+0xd0/0x128 panic+0x15c/0x374 watchdog_timer_fn+0x2b8/0x304 __run_hrtimer+0x88/0x2c0 __hrtimer_run_queues+0xa4/0x120 hrtimer_interrupt+0xfc/0x270 arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x94/0x220 __handle_domain_irq+0x88/0xf0 gic_handle_irq+0x84/0xfc el1_irq+0xc8/0x180 slip_unesc+0x80/0x214 [slip] tty_ldisc_receive_buf+0x64/0x80 tty_port_default_receive_buf+0x50/0x90 flush_to_ldisc+0xbc/0x110 process_one_work+0x1d4/0x4b0 worker_thread+0x180/0x430 kthread+0x11c/0x120 In the testcase pty04, The first process call the write syscall to send data to the pty master. At the same time, the workqueue will do the flush_to_ldisc to pop data in a loop until there is no more data left. When the sender and workqueue running in different core, the sender sends data fastly in full time which will result in workqueue doing work in loop for a long time and occuring softlockup in flush_to_ldisc with kernel configured without preempt. So I add need_resched check and cond_resched in the flush_to_ldisc loop to avoid it. Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com> Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c91cf42 ] This patch fixes the following gcc 10 build error: arch/mips/sni/time.c: In function ‘a20r_set_periodic’: arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow] 15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ) | ^ arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’ 21 | *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV; | ^~~~~~~~~~~~~~~~ Cc: linux-mips@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e3ace0 ] The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32. Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f347c26 ] The following issue was observed running syzkaller: BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline] BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815 CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe4/0x14a lib/dump_stack.c:118 print_address_description+0x73/0x280 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:352 [inline] kasan_report+0x272/0x370 mm/kasan/report.c:410 memcpy+0x1f/0x50 mm/kasan/kasan.c:302 memcpy include/linux/string.h:377 [inline] sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034 __blk_run_queue_uncond block/blk-core.c:464 [inline] __blk_run_queue+0x1a4/0x380 block/blk-core.c:484 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716 sg_write+0x64/0xa0 drivers/scsi/sg.c:622 __vfs_write+0xed/0x690 fs/read_write.c:485 kill_bdev:block_device:00000000e138492c vfs_write+0x184/0x4c0 fs/read_write.c:549 ksys_write+0x107/0x240 fs/read_write.c:599 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe We get 'alen' from command its type is int. If userspace passes a large length we will get a negative 'alen'. Switch n, alen, and rlen to u32. Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed1227e ] This patch fixes the following bugs: 1. If there are multiple ordered cmds queued and multiple simple cmds completing, target_restart_delayed_cmds() could be called on different CPUs and each instance could start a ordered cmd. They could then run in different orders than they were queued. 2. target_restart_delayed_cmds() and target_handle_task_attr() can race where: 1. target_handle_task_attr() has passed the simple_cmds == 0 check. 2. transport_complete_task_attr() then decrements simple_cmds to 0. 3. transport_complete_task_attr() runs target_restart_delayed_cmds() and it does not see any cmds on the delayed_cmd_list. 4. target_handle_task_attr() adds the cmd to the delayed_cmd_list. The cmd will then end up timing out. 3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute them out of order, because target_handle_task_attr() will hit that simple_cmds check first and return false for all ordered cmds sent. 4. We run target_restart_delayed_cmds() after every cmd completion, so if there is more than 1 simple cmd running, we start executing ordered cmds after that first cmd instead of waiting for all of them to complete. 5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older cmds have completed, and not just simple. 6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock for every cmd completion when ordered cmds are almost never used. Just replacing that lock with an atomic increases IOPs by up to 10% when completions are spread over multiple CPUs and there are multiple sessions/ mqs/thread accessing the same device. This patch moves the queued delayed handling to a per device work to serialze the cmd executions for each device and adds a new counter to track HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to determine when to run the work on the completion path. Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1283c0d ] We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…t_odr() [ Upstream commit 94be878 ] The length of hw->settings->odr_table is 2 and ref_sensor->id is an enum variable whose value is between 0 and 5. However, the value ST_LSM6DSX_ID_MAX (i.e. 5) is not caught properly in switch (sensor->id) { If ref_sensor->id is ST_LSM6DSX_ID_MAX, an array overflow will ocurrs in function st_lsm6dsx_check_odr(): odr_table = &sensor->hw->settings->odr_table[sensor->id]; and in function st_lsm6dsx_set_odr(): reg = &hw->settings->odr_table[ref_sensor->id].reg; To avoid this array overflow, handle ST_LSM6DSX_ID_GYRO explicitly and return -EINVAL for the default case. The enum value ST_LSM6DSX_ID_MAX is only present as an easy way to check the limit and as such is never used, however this is not locally obvious. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/20211011114003.976221-1-starmiku1207184332@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 911a81c ] The 'struct attribute' flex array contains some struct lock_class_key's which become big when lockdep is turned on. Big enough that some drivers will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate enough memory: WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0 Call Trace: kmalloc_order+0x2a/0xb0 kmalloc_order_trace+0x19/0xf0 __kmalloc+0x231/0x270 ib_setup_port_attrs+0xd8/0x870 [ib_core] ib_register_device+0x419/0x4e0 [ib_core] bnxt_re_task+0x208/0x2d0 [bnxt_re] Link: https://lore.kernel.org/r/20211019002656.17745-1-wangyugui@e16-tech.com Signed-off-by: wangyugui <wangyugui@e16-tech.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79b20be ] An error is detected with the following report when unloading the driver: "KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b" The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the flag is not cleared upon completion of the login. This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used as an rpi_ids array index. Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in lpfc_mbx_cmpl_fc_reg_login(). Link: https://lore.kernel.org/r/20211020211417.88754-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1854f53 ] If an FC link down transition while PLOGIs are outstanding to fabric well known addresses, outstanding ABTS requests may result in a NULL pointer dereference. Driver unload requests may hang with repeated "2878" log messages. The Link down processing results in ABTS requests for outstanding ELS requests. The Abort WQEs are sent for the ELSs before the driver had set the link state to down. Thus the driver is sending the Abort with the expectation that an ABTS will be sent on the wire. The Abort request is stalled waiting for the link to come up. In some conditions the driver may auto-complete the ELSs thus if the link does come up, the Abort completions may reference an invalid structure. Fix by ensuring that Abort set the flag to avoid link traffic if issued due to conditions where the link failed. Link: https://lore.kernel.org/r/20211020211417.88754-7-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…ore devloss [ Upstream commit af984c8 ] A link bounce to a slow fabric may observe FDISC response delays lasting longer than devloss tmo. Current logic decrements the final fabric node kref during a devloss tmo event. This results in a NULL ptr dereference crash if the FDISC completes for that fabric node after devloss tmo. Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when devloss tmo triggers and we've noticed that fabric node recovery has already started or finished in between the time lpfc_dev_loss_tmo_callbk queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then the driver reverses the devloss tmo marked kref put with a kref get. If fabric node recovery fails, then the final kref put relies on the ELS timing out or the REG_LOGIN cmpl routine. Link: https://lore.kernel.org/r/20211020211417.88754-8-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14b43c2 ] Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq governor to the list of the Tegra20 EMC driver module softdeps to allow userspace initramfs tools like dracut to automatically pull the devfreq module into ramfs image together with the EMC module. Reported-by: Nicolas Chauvet <kwizart@gmail.com> Suggested-by: Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211019231524.888-1-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aed2886 ] Fixes build warnings: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14a1f6c ] Fixes warnings regarding to memory and mdio nodes and apply new naming following dt-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 179811b ] According to the new DT schema for qcom,rpm-msg-ram the node name should be sram@. memory@ is reserved for definition of physical RAM (usable by Linux). This fixes the following dtbs_check error on various device trees: memory@60000: 'device_type' is a required property From schema: dtschema/schemas/memory.yaml Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2ce1b21 upstream. commit d5bb69d ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") updated DMAEngine API _all() to _sync(), but it should be _async(). _all() and _async() are almost same, the difference is only return error code. _sync() will call dmaengine_synchronize() and will be kernel panic. This patch is needed for v5.15 or later. [ 27.293264] BUG: scheduling while atomic: irq/130-ec70000/131/0x00000003 [ 27.300084] 2 locks held by irq/130-ec70000/131: [ 27.304743] #0: ffff0004c274d908 (&group->lock){....}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x48/0x54 [ 27.314344] #1: ffff0004c1788c60 (&priv->lock#2){....}-{2:2}, at: rsnd_soc_dai_trigger+0x70/0x7bc [ 27.323409] irq event stamp: 206 [ 27.326664] hardirqs last enabled at (205): [<ffff80001082de50>] _raw_spin_unlock_irq+0x50/0xa0 [ 27.335529] hardirqs last disabled at (206): [<ffff80001082d9e4>] _raw_spin_lock_irqsave+0xc4/0xd0 [ 27.344564] softirqs last enabled at (0): [<ffff800010037324>] copy_process+0x644/0x1b10 [ 27.352819] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 27.359142] CPU: 0 PID: 131 Comm: irq/130-ec70000 Not tainted 5.14.0-rc1+ torvalds#918 [ 27.366429] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77950 (DT) [ 27.373975] Call trace: [ 27.376442] dump_backtrace+0x0/0x1b4 [ 27.380141] show_stack+0x24/0x30 [ 27.383488] dump_stack_lvl+0x8c/0xb8 [ 27.387184] dump_stack+0x18/0x34 [ 27.390528] __schedule_bug+0x8c/0x9c [ 27.394224] __schedule+0x790/0x8dc [ 27.397746] schedule+0x7c/0x110 [ 27.401003] synchronize_irq+0x94/0xd0 [ 27.404786] rcar_dmac_device_synchronize+0x20/0x2c [ 27.409710] rsnd_dmaen_stop+0x50/0x64 [ 27.413495] rsnd_soc_dai_trigger+0x554/0x7bc [ 27.417890] snd_soc_pcm_dai_trigger+0xe8/0x264 Cc: <stable@kernel.org> Fixes: commit d5bb69d ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination") Link: https://lore.kernel.org/r/TY2PR01MB3692889E1A7476C4322CC296D8AE9@TY2PR01MB3692.jpnprd01.prod.outlook.com Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mtmfz36o.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
… devices commit fc153ab upstream. Instead of maintaining a single-linked list of devices that must be searched linearly in .remove() just use spi_set_drvdata() to remember the link between the spi device and the driver struct. Then the global list and the next member can be dropped. This simplifies the driver, reduces the memory footprint and the time to search the list. Also it makes obvious that there is always a corresponding driver struct for a given device in .remove(), so the error path for !max3421_hcd can be dropped, too. As a side effect this fixes a data inconsistency when .probe() races with itself for a second max3421 device in manipulating max3421_hcd_list. A similar race is fixed in .remove(), too. Fixes: 2d53139 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211018204028.2914597-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a8c777 upstream. When a VF requests promiscuous mode and it's trusted and true promiscuous mode is enabled the PF driver attempts to enable unicast and/or multicast promiscuous mode filters based on the request. This is fine, but there are a couple issues with the current code. [1] The define to configure the unicast promiscuous mode mask also includes bits to configure the multicast promiscuous mode mask, which causes multicast to be set/cleared unintentionally. [2] All 4 cases for enable/disable unicast/multicast mode are not handled in the promiscuous mode message handler, which causes unexpected results regarding the current promiscuous mode settings. To fix [1] make sure any promiscuous mask defines include the correct bits for each of the promiscuous modes. To fix [2] make sure that all 4 cases are handled since there are 2 bits (FLAG_VF_UNICAST_PROMISC and FLAG_VF_MULTICAST_PROMISC) that can be either set or cleared. Also, since either unicast and/or multicast promiscuous configuration can fail, introduce two separate error values to handle each of these cases. Fixes: 01b5e89 ("ice: Add VF promiscuous support") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ff0428 upstream. PF pointer is always valid when PCI core calls its .shutdown() and .remove() callbacks. There is no need to check it again. Fixes: 837f08f ("ice: Add basic driver framework for Intel(R) E800 Series") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e60feb4 upstream. If you already have an inode and need to update the time on the inode there is no way to do this properly. Export this helper to allow file systems to update time on the inode so the appropriate handler is called, either ->update_time or generic_update_time. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54fde91 upstream. Christoph pointed out that I'm updating bdev->bd_inode for the device time when we remove block devices from a btrfs file system, however this isn't actually exposed to anything. The inode we want to update is the one that's associated with the path to the device, usually on devtmpfs, so that blkid notices the difference. We still don't want to do the blkdev_open, so use kern_path() to get the path to the given device and do the update time on that inode. Fixes: 8f96a5b ("btrfs: update the bdev time directly when closing") Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4777ef upstream. While commit 097b914 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()") fixed immediate issues found when KFENCE was enabled/tested, there are still similar issues, when tcp_trim_head() hits KFENCE while the master skb is cloned. This happens under heavy networking TX workloads, when the TX completion might be delayed after incoming ACK. This patch fixes the WARNING in sk_stream_kill_queues when sk->sk_mem_queued/sk->sk_forward_alloc are not zero. Fixes: d3fb45f ("mm, kfence: insert KFENCE hooks for SLAB") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Marco Elver <elver@google.com> Link: https://lore.kernel.org/r/20211102004555.1359210-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef775a0 upstream. When CONFIG_PROC_FS is not set, there is a build warning (turned into an error): ../drivers/hwmon/dell-smm-hwmon.c: In function 'i8k_init_procfs': ../drivers/hwmon/dell-smm-hwmon.c:624:24: error: unused variable 'data' [-Werror=unused-variable] struct dell_smm_data *data = dev_get_drvdata(dev); Make I8K depend on PROC_FS and HWMON (instead of selecting HWMON -- it is strongly preferred to not select entire subsystems). Build tested in all possible combinations of SENSORS_DELL_SMM, I8K, and PROC_FS. Fixes: 039ae58 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k") Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lkml.kernel.org/r/20210910071921.16777-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 868ddfc upstream. The code for hdac_ext_stream seems inherited from hdac_stream, and similar locking issues are present: the use of the bus->reg_lock spinlock is inconsistent, with only writes to specific fields being protected. Apply similar fix as in hdac_stream by protecting all accesses to 'link_locked' and 'decoupled' fields, with a new helper snd_hdac_ext_stream_decouple_locked() added to simplify code changes. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210924192417.169243-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…m_assign() commit 1465d06 upstream. The fields 'opened', 'running', 'assigned_key' are all protected by a spinlock, but the spinlock is not taken when looking for a stream. This can result in a possible race between assign() and release(). Fix by taking the spinlock before walking through the bus stream list. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210924192417.169243-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: Scott Bruce <smbruce@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211124115718.776172708@linuxfoundation.org Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Rudi Heitbaum <rudi@heitbaum.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…flags BugLink: [Replace -fcf-protection=none patch with new version] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline support to prevents such build failures. Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1585311 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <tcrawford@system76.com>
…02111250933 Signed-off-by: Jeremy Soller <jeremy@system76.com>
|
Obsoleted by #84 |
mmstick
pushed a commit
that referenced
this pull request
Jul 6, 2024
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.5